XPS 10 and video output without the dock/keyboard

Similar Questions

• EliteBook 8560p: is it possible to run three screens without the dock?

  Is it possible to rotate the 3 screens of x (including residents) without the dock? I see 3 x displays using display properties in Win7, but only two will work. It does not extend to the third screen. I am trying to download the latest drivers for the laptop now and updated my BIOS yesterday, so I should be perfectly updated in the next five minutes.

  Hello

  My calculation shows that it cannot handle more than the number of dots (pixels), it can handle. Part of the anther, the video card on your laptop can ONLY signals of exit from a port at a time (not counting the screen of the laptop itself).

  Kind regards

  BH

• BlackBerry Smartphones Just accepts updates my Blackberry Desktop and all THE Photo and video recorded on the Media Manager went

  Hello! I just accepted updates my Blackberry Desktop includes all Blackberry Desktop manager treats me like a new. And freaked out as all THE Photo and video recorded on the old Media Manager Media Manager are worth more than 3 years gone-Its photos and videos that I have stored on the Blackberry Desktop that existed before the update

  Really freaked out because these photos are irrepalcable would appreciate advice thanks

  Hello

  Have you checked to see if the pictures are found in your Documents folder by browsing until then on your computer system?

  What version of the Desktop software update you? Select the [?] is the top right and select "on BlackBerry Desktop Software. Version 7.1.0. ? or 7.0.0. ? or 6.1.0. ?

• Is it possible to output a string and digital front without the border around it?

  I know that I can change the border around a string or a digital output to the screen using modern or classic, but is possible to output and the numeric values to the front channels without the border around it? This is particularly useful for panels to front I want to print.

  Thank you

  Chuck

  You are to halfway it using the conventional versions. The next step is to get out of your paint tool and paint the color of the transparent border.

  Ben

• acquisition and video recording of the camera

  Hello world

  I developed a VI to acquire and record the video with my camera. For now check in is every time I run the VI but not know that I try to implemant it is able to record video only when I press the button "Save". The first results are good, I can get the video and display it on the screen with or without saving it. I can record the video by pressing the right button while it on the screen. But in the economy, the displayed video is listening (delay, changing color, etc.) and then I opened my .avi file, I had the same problem.

  Do you know where it comes from.

  Sincerely,.

  Julien

  Can you post a snippet/VI where you save it and view operation. Long back, I had the same problem with a video capture of web cam but resolved some how.

• Wake up without the Dock?

  I did a quick search of the forum/web site and did not find the answer...

  Is there a way to watch the wake screen that you normally see in the dock without being in the dock (or play with magnets)? I guess it's an app on the phone, but I don't see any icon for it.

  KeV

  If you want the entire screen, a large number, weather, etc., then look in the market for an application named Runner Dock, it gives you the look w/out the home cradle.

• Qosmio X 300 - no video output after the installation of Nvidia 9800 M GTX

  Hi again all,

  Now, I have all the parts for my X 300 to fix it back to normal. Heatsinked the new chip, everything installed correctly... And no output.

  No monitor and no external.

  Now, I'm really stuck.

  Any ideas?

  Thank you.

  Ideas? On what? What you have done wrong with your laptop? I mean how can we offer some virtual diagnosis?

  Please don t get me wrong, but are you authorized and approved?
  If you do all this as a hobby, I don t think we can help you with this. You will be lucky and it works or... simply bad luck. Something is obviously not done properly.

  Did you get the parts or parts already used nine?

• Built-in BD and video player on the Internet

  I recently got a KDL-32EX40B TV with BD and video Internet player. Although slow to start using N of Sony wireless adapter, it seemed to work OK once I've manually updated the firmware to version PKG4.081AAB (NetFlix wouldn't work at all before this update, and the feature of automatic update in the game told me that the 3 something version was later if no update was necessary).

  In fact, it worked OK until it didn't. Would come and bring some TV station was tuned to the TV, but when you press 'Home' or 'Internet Video', he would just stand there until a message informed me that he was turned on. Later another message saying that it has detected a USB wireless device. Then after awhile, I could press 'Home' or 'Internet Video' and he would take me to the home screen where finally the icons would appear. Pressing NetFlix slowly take me to NetFlix where I could choose something. When the show came (after the 'Connection', 'Control link speed,' messages 'Connection' and 'Reconnect'), the information bar on the top and on the bottom of the screen progress bar would not go far and after about 10 seconds the TV turns off and everything started again. 10 minutes full ten seconds of NetFlix.

  By trial and error, I discovered that this has happened when my wife left a DVD in the player integrated comics. Remove the DVD and restart the TV appears to work correctly. It was only yesterday, so let's see what's happening today or the next few days.

  It is a programming problem in the firmware for sure. It is also something that should be documented if necessary being the culprit. If not leave a DVD in player results in no video problem Internet more, I'll Growl but tolerate it. If the problem returns, I return all since I only got it for a little over a week.

  It has not been wired or wireless, but I find the question. I use a router D - Link DIR - 855 dual band 4 gigabit ports. It is not a dedicated media streamer or DLNA certified device. That shouldn't matter, but it could. I checked the advanced configuration of the router settings and found a box for ' Enable UPnP. It has not been verified, if I checked it, rebooted the router and the problem of Netflix to freezing and crashing while a DVD was still in the TV went off.

  Knowing not enough about what enabling UPnP, I can only say it seems to make a difference. If you discover in your labs that you can reproduce this problem, it might be interesting to note something on the routers in your FAQ. If you can't reproduce, then clearly it's black magic and I need to spend more time learning the secret incantations.

  With respect to the update of the firmware, it has been updated automatically, and he did as soon as I'm the wireless enabled in TV. But he upgraded to an older version that you have available for download. He had been in place for several days until I've manually updated, so it wasn't like I had not given the time. I also made sure the TV to search for updates before I flashed to via the key USB and TV told me I had the latest version already installed but it was clearly not the strength. Flashing the update firmware well and solved the problems I described in my first post.

  Thank you.

  Peter

• Satellite A200-10 x and video crashes when the volume is high aid

  every time I watch a video, and the volume is above a certain level (not even maxed out) the video begins to freeze and the entire system after that... If I turn down the volume of the small wheel at the front, sometimes he gets after several minutes, but some other times, it shows just the Blue error screen and restarts immediately... I almost tried everything... had more memory (2 GB), formatted and installed win 7 32, installed all the latest drivers for this version of windows...

  I'm totally frustrated with this laptop... He had problems from the beginning, I mean, they have launched it with Vista Home and 1 GB of ram which was simply too small for the system working properly... So they forced just buy you mem more because you wouldn't be able to work.

  If someone knows one any solution please help me

  > I have almost tried everything
  Have you also tried to install original recovery image Toshiba (OS that you got with your laptop) and test it with the factory settings?
  What videos you watch? A few stuff downloaded or original DVD movies?

  When you look at the film and the sound is low is all OK?

  I have Satellite P200 and it's the same as yours, but a bit bigger notebook with 17-inch screen. I have 2 GB of RAM inside, and it works perfectly with original Vista and now Win7 32 bit.

• Synchronization of analog and digital output with the external sample clock

  Hello

  First of all sorry for my English, I will try to explain what I want to do.

  I want my PCIe-6321 to send two custom signals (modification sawtooths) on a mirror controller. I would also like to generate output with my card at the beginning of each tooth of saw. Everything must be synchronized with an external k-clock signal of 100 kHz. The idea is that whenever the PCI receives a trigger to external clock, it sends two analog output voltages and when he received 1024 clock ticks it will also send a pic of triggering TTL. What I do is first prepare the map and after that in a loop sending and modifing the output values of the two signals and at the same time send a digital signal Boolean in each arch, so when's done it 1024 iterations of the loop I send an event to the digital port. Attached you can see.

  The problem is that I don't know how to synchronize both. Can I use the sample clock just to the analog output? I can use sample for the two outputs clock, or do I need to use the output of the meter? If don't know how to use it here.

  If I do nothing else bad/wrong, I would be grateful for feedback.

  Thanks in advance,
  Pablo

  I don't know how but I find the solution. I'm generating more than a positive value (as I was triggered maybe very fast the oscilloscope has been absent there). If I put the sample clock of digital output to use the sampling/ao/Dev1 clock that it doesn't, but if I put to use the same source as the OD (terminal where my external clock is connected), but the trigger to start the DO to be Dev1/ao/StartTrigger this works. I don't really know why, but it does.

  Thank you for your patience and your help. I put here the final code.

• All the pictures and videos stored on the previous deskmanager Blackberry phones smart blackBerry disappeared after I have accept updates

  I'd appreciate any advice really - when I was accessing my media on my blackberry Desktop Manager Manager I've been invited to accept updates that I did - it seems to have downloaded a new blackberry desktop and I lost all the photos and vids I stocked up on previous - such a freak out as about 3 years worth of travel and pictures of the family and of the videos stored in my manager of blackberry desktop software

  Appreciate any help thanks

  Anything sync'd through your BDS is stored in a folder somewhere... usually My Documents > my pictures > BlackBerry (or my videos > BlackBerry). It depends on the path specified for the folder when you set up the synchronization of the image.

• Sequence of pixelation and video output

  Hello

  I have a project where I have original video pan within a smaller area of the sequence, a kind of Ken Burns effect.

  My overview of the sequence happens very pixelated and this, any export of this video file.

  I tried to export to MOV, AVI, FLV, MP4 and other formats, with different codecs, quality settings, binary and other - flow does not.

  I also tried to make sequence with different codecs prior to export, the effects of pan and make a WMP - it comes out exactly the same.

  Here's how it looks compared to the original video, if you look at the top line of the arms of the girl, you'll see what I mean:

  i.imgur.com/6IkGLez.jpg

  This is how the export looks like for Quicktime:

  i.imgur.com/r53Pblm.jpg

  I will appreciate if someone tells me why this is happening and how to remove the pixelation.

  Thank you!

  Ah ok.

  Yes, create a new sequence with fields to which Progressive instead of low.

  Copy and paste all of the old order in the new.

  And sure, when rendering, you use no. fields / Progressive on your exports too (in your screen shot you have down)

• feeling a little cheated - Mac version has fewer transitions and video effects for the PC version

  I just read in the book of Steve Mac of first items 11 a signficantlly a version number lower transition and effects video as the PC version. The Mac version seems still gives more than iMovie, but what? Why would it be the idea behind offer less in this regard?

  Thank you

  Tony

  This disparity has been discussed repeatedly in the Premiere Pro forum. Adobe highlights the differences between the way in which the operating system Windows and Mac OS, as the reason - some Transitions and effects do not work on a Mac.

  If this list is now a few old versions (CS 4 PrPro), it covers what were then the differences. PrPro CS 6, some PC Transitions and effects were also eliminated, since some would not work with the graphics MPE/CUDA, even on the PC: http://forums.adobe.com/thread/460313?tstart=1470

  Adobe has been able to port a little more on the Mac, but not nearly all of them.

  Good luck

  Hunt

• HP Pavilion 23 All in one PC: how to video output of the 23 Pavilion

  Hi HP.

  I use HP Pavilion23 AIO PC like my PC photography. I often have a video projector or tv but it wasn't a video output for Pavilion 23.

  I'm looking for video output solution fom my PC AIO.

  Are there any external video card, can I apply?

  Is there any device USB - HDMI that I can use?

  Please advice as it is an obstacle for my work.

  BenSiak Malaysia

  Hello

  They are many, such as:

  http://www.StarTech.com/AV/USB-video-adapters/USB-3-to-HDMI-DVI-external-video-card-multi-monitor-adapter-1920x1080~USB32HDE

  Kind regards.

• After FlashPlayer 11.04, a site with videos, like YOUTUBE opens a separate process and videos appear in the upper left corner and cannot be moved.

  After update to a version after FlashPlayer 11.02 when you open a window with flash videos on, next to the Firefox process in the taskbar appears a new process with the Flash Player icon and the video window is placed in the upper left corner and cannot be moved. If there is more a video on this page when you click on that Flash Player icon, you can see a list of all the videos.

  Using Flash Player 11.02 this problem does not occur and I used this solution for quite awhile, but now, if I use this version, I get a black window with an error message on security reasons, but if I click on it it plays without any problems. Although in a few Web sites that require Flash, he says he needs at least version 10, but I 11.02 but does not recognize it and ask to be upgraded.

  It's very weird because that doesn't happen in my laptop, I have a desktop computer with the exact same windows and version Firefx and this happens. I already tried uninstalling Firefox completely and even remove all plugins and extensions, and the problem persists.

  Uninstall Flash player also solves this, but then I wonder to upgrade the Flash player. This problem occurs in Chrome or IExplorer 10:

  http://Tinypic.com/view.php?pic=15pn2ab & s = 4

  http://Tinypic.com/view.php?pic=24v2u4l & s = 4

  Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox are most likely caused by a recent update of Flash 11.3 and/or Real Player browser plugin to malfunction.

  To resolve this problem, follow the steps in these articles in the Knowledge Base:

  Flash Plugin - maintain and troubleshoot

  Adobe Flash plugin has crashed - avoid that it happen

  11.3 Flash does not load video in Firefox

  We'll find other information on more technical issues under these links:

  http://forums.Adobe.com/thread/1018071?TSTART=0

  http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

  Please tell us if it helped!