XPS 2720 touchscreen stopped working

Similar Questions

• Satellite U920T - touchscreen stopped working

  My touchscreen as stopped working. It worked very well, screen fell asleep, and when I woke up it to the top of the touch screen had ceased to function. Not sure if I may push or hit something to lock or disable the touch screen?

  There is a function key to lock the touchpad (mouse pads) on the keyboard, but nothing obvious on the screen.
  Thank you

  If nothing helps, try to reinstall the HARD drive recovery image and test it with the factory settings.

• screen iPhone touchscreen stop working after updating IOS 9.3.2

  My phone was working without any problem and update the IOS 9.3.2 jumps on my phone. I update my phone as I normally. Now, the screen touch freaking work not AT ALL!

  I tried a hard reboot I read MANY MANY MANY other users have this exactly the same problem. I tried to restore my phone and can't do same. Now my Itunes has decided on his OWN that is has an encrypted password that I NEVER put.

  I'm so SICK of Apple, trying to fix 1 thing in IOS updates only break 50 other things!

  Any help would be greatly appreciated. Technical support has been less helpful on the phone. They advised me to put out a follow-up movement in my privacy settings and it should fix the problem. It would be GREAT if the touchscreen works! Morans!

  iPhone 6, iOS 9.3.2,and WORSE NEVER UPDATE!

  I had problems with touch-screen with my iPhone 5 s immediately after the update to 9.3.2. It was very frustrating - the screen would bounce around to choose things that I wasn't tapping and scrolling fast and sometimes simply freeze completely for a few seconds. I've never had problems before update!

  I have not found how to fix 9.3.2,and but I managed to restore my OS to 9.3.1 (which solved the problem of the touch screen) until the next version of iOS comes out which will be hopefully resolve this issue.

  Here are the directions that I followed to roll back my iOS: http://www.gottabemobile.com/2016/05/16/how-to-downgrade-ios-9-3-2-to-ios-9-3-1/

• Touchscreen stop working after updating IOS 9.3.2

  My phone was working without any problem and update the IOS 9.3.2 jumps on my phone. I update my phone as I normally. Now, the screen touch freaking work not AT ALL!

  I tried a hard reboot I read MANY MANY MANY other users have this exactly the same problem. I tried to restore my phone and can't do same. Now my Itunes has decided on his OWN that is has an encrypted password that I NEVER put.

  I'm so SICK of Apple, trying to fix 1 thing in IOS updates only break 50 other things!

  Any help would be greatly appreciated. Technical support has been less helpful on the phone. They advised me to put out a follow-up movement in my privacy settings and it should fix the problem. It would be GREAT if the touchscreen works! Morans!

  I had problems with touch-screen with my iPhone 5 s immediately after the update to 9.3.2. It was very frustrating - the screen would bounce around to choose things that I wasn't tapping and scrolling fast and sometimes simply freeze completely for a few seconds. I've never had problems before update!

  I have not found how to fix 9.3.2,and but I managed to restore my OS to 9.3.1 (which solved the problem of the touch screen) until the next version of iOS comes out which will be hopefully resolve this issue.

  Here are the directions that I followed to roll back my iOS: http://www.gottabemobile.com/2016/05/16/how-to-downgrade-ios-9-3-2-to-ios-9-3-1/

• How can touchscreen stop working, I solve the problem?

  Touch screen left a while ago to work. How can I fix the problem?

  Hi Tricia,

  1. What is the brand and model of the computer?

  2 has there been recent changes made on the prior computer question?

  I suggest you link and check if that helps.

  Mouse, touchpad and keyboard with Windows problems

  Let us know the results. We will be happy to help you further.

• touchscreen stops working. HID is stopped by the code 43 windows

  The osk would not come & I had to use the keyboard and mouse external because the touch of the screen appear not work

  I used the Acer cat too. I'm just afraid I'm going to send it and it will come back with the same problem.

• HP Pavilion 11 x 360: Touch Screen has suddenly stopped working?

  I am on Windows 10 and recently, I decided to update my drivers using driver Booster. Everything worked well and I had no previous problem with this laptop or Windows 10. Once I have completed their update, it prompted me to restart my computer, and after that he started upward, the touchscreen stopped working. For this reason, I am almost certain that it is a driver problem. I looked on other forums and have tried many suggestions. So far I have

  -Restarting my laptop (of countless times)

  -Disabled and enabled the "HID-compliant wireless radio controls.

  -Unchecked the boxes that say "allow this computer to turn off this device to save power" under "Universal Serial Bus controllers".

  -Update the drivers (it just tells me that the best version is already installed)

  -I have restored the laptop because I'm not entirely sure how to do it correctly.

  It doesn't let me roll back the touch screen drivers. When I choose "show devices" extra touch screen drivers appear, but as the "HID-compliant touch" screen say now, "this hardware device is not connected to the computer. (Code 45)

  To resolve this problem, reconnect this hardware device to the computer. "under the status of the device.

  I have no idea how to reconnect the material and I do not understand how it is even not connected.

  I am beyond confused and frustrated and don't know what else to do. Please help if you think you might know what to do! All advice is appreciated. Thank you!

  Hi there @StevieRachelle3,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that the touchscreen on your PC portable HP Pavilion 11 x 360 stopped working after you did an update.

  You mentioned that you used a program called driver Booster to make the driver updates.

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If this does not change anything, please use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows 10:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Select "Choose a different restore point"
  • Click Next
  • A box that says "Restore your computer to the State it was in prior to the event selected" will pop up
  • Choose event
  • Click Next
  • Click Finish
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  You can also use the Windows updates to update the drivers or you can go to the page HP Pavilion 11 x 360 Notebook PC Driver and software to update the drivers manually.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of troubleshooting as well as your model number (How can I find my model number or product number?).

  I hope this helps!

• Acer Aspire R7: Touchscreen suddenly stopped working

  Hey everybody,

  I have an Aspire R7 (running 64-bit Windows 8). Yesterday morning my touchscreen suddenly stopped working.

  After each start, I see an error in the event log stating something like "Driver\WUDFRd could not load the driver for the device HID\VID_0483 & PID_91D1 & Col01\7 & 1b0945e0 & 0 & 0000.

  In Device Manager there is no device showing an error or something. In the category "Monitor" it is only a PnP monitor listed - shouldn't the TouchInput unit shown here? Edit: I also looked through the HID devices: the appliance with the ID hardware event log message is not there, too.

  I tried reinstalling the drivers HID-monitor using Acer Recovery Manager, but nothing else happens after showing some information like 'installation'. Also, there is no change in Device Manager.

  I also removed the "PnP Monitor' of Device Manager and began a 'search for new hardware", but that doesn't lead to the "PnP Monitor' be reinstalled.

  I also perform a factory reset, but that did not help, as well.

  I would really appreciate help from anyone. I'm at work now, so I wouldn't be able to test stuff until about 17:00 (MEST).

  Kind regards

  Jan

  I found the reason of my touch screen doesn't respond do not: if I position the screen in a very precise angle - 'almost' tablet mode - the screen reacts to the keys and of the previously disabled HID devices becomes active. I had sent in my laptop for repair after a default display - apparently in some sort the touch sensor was not back in place correctly when the screen has been replaced

  Seems that now I have to send my laptop in another repair (making three repairs for this laptop - the default mentioned display occurred after the motherboard has been replaced by the same Acer repair center)

• My Dell Inspirion Windows 8 touchscreen simply stop working how can I fix this problem?

  I have a new computer old five months of Dell and the touch screen suddenly stop working, why? And how can I solve this problem?

  Hi Jim,.

  What is the model number of the laptop Dell Inspiron?

  I recommend to download and install the drivers for touchscreen on the manufacturer's Web site and check if this may help you, download the problem solved.

  Answer please if you have any questions.

• Touchscreen stop EliteBook 2760p work after windows

  EliteBook 2760p

  'Pen' and 'Finger touch' stop working

  Product name: HP EliteBook 2760p

  Operating system: Windows 7 Professional 32-bit (service pack 1)

  Error: cannot anywhere find any error message

  Changes made to the system hardware or recent software: no

  Description of the problem:

  I didn't go to the customer service again I have not go I post just this forum who know someone who can help.

  'Pen' and 'Finger touch' stop working if I do this:

  STEP A

  Spoiler (Highlight to read)

  1. stop windows / power off

  2. remove the batery (while the touchscreen still works)

  3. plug the power cord

  4. start windows / power

  5. stop windows / power off

  6. unplug power cord

  7. Insert batery

  8. start windows / power (no batery power to just cord)

  9. press on the screen work stoppage

  1. stop windows / power off2. remove the batery (while the touchscreen still works) 3. Connect power cord4. Start windows / power on5. Windows Shutdown / power off6. Unplug power cord7. Insert batery8. Start windows / power (no batery power cord just) 9. Touch screen stop working

  Connection method: wifi

  Issue of duplication: Happens all the time when I do above, even if I only do step r.5 to 8

  Performed troubleshooting:

  STEP B

  Spoiler (Highlight to read)

  1. when the screen does not touch and batery is inserted and plugged power cord.

  2. shut down windows

  3. start windows

  4 touch screen works again (until I do the steps A.1 - 8 or 8 - A.5, it occurs once again)

  1. when the touchscreen does not and batery is inserted and no plugged.2 power cord. Stop windows3. Start windows4. touch screen works again (until I do the steps A.1 - 8 or 8 - A.5, it occurs once again)

  Technical expertise: I can install windows, drivers and software, but I don't like not change registery, install crapware or not normal tweaks.

  SLIPPED

  Finally I have my laptop is back to the customer service. and he replaced my screen. now, it works fine.

• Dell XPS 12 Mini DisplayPort seems to have stopped working

  Hello

  My Mini DisplayPort seems to have stopped working. I can connect on the same monitor of the ultrabook even through the USB port. However, because I'm a geek of database I need up to 3 screens. So when I try and connect to my Mini DisplayPort monitor the screen resolution tab in the Control Panel recognizes the display. However, the actual display is empty. Mini DisplayPort has worked well for the last 8 months or so, but stopped working tonight.

  The external monitor is; -Samsung; SyncMaster 941BW/940BW\199BW, SyncMaster Magic CX915BW (Digital)

  Any help would be greatly appreciated.

  Kind regards

  Kieran.

  I replaced the cable and now it seems to work.

  Thank you

  Kieran.

• Satellite U840T-103 - touch screen stopped working

  Hi, I have a Satellite, U840t-103.

  The touch screen has stopped working earlier.
  I don't know why.

  I think I have been juggling the project button, but I still can't get it to work again.

  Help, please.

  Hello

  Touch screen don't need any special driver of Toshiba.
  The driver is already part of Windows 8 / 8.1
  That is why I don't think there is a software problem, but of course, I would recommend you to retrieve the computer laptop back to factory settings using the Toshiba recovery disc just to check if this procedure would allow the touchscreen feature once more.

  This is a first common procedure in case something bad would happen to the laptop or the system.

  But if the system recovery doesn't help, the laptop must be verified by the service provider allowed for possible hardware malfunction. But let's hope, the recovery procedure would solve your problem.

• My PC communicates wirelessly with my C309a HP, but Hp solution Center has stopped working.

  My PC (Dell XPS 9000) communicates with my C309a HP wireless printing, but the Hp Center solution has stopped working. If I should not be able to use all functions wireless?

  I get a message error "HP Solution Center can work because your device installation is not complete. Please connect the usb cable or re-run Setup from the instattation for a network installation CD. "When I put the installation disc to remedy the problem, it tells me that my current software is the last, while it will not be updated. When I go to the center of update, it tells me I have the latest version of the software.

  Hello

  Try these:

  Click the icon to the Start Menu > programs > HP > HP Photosmart c309a > add a device

  With this, it will find the wireless printer and reconfigure the parameters; Just follow the guests. After completion, try to open the HP Solution Center.

• Button ThinkPad 8 Windows has stopped working

  All of a sudden the Windows button has stopped working (no haptic feedback). The Tablet works otherwise, I can always power on it by the power button / stop. Unfortunately, the button power seems to be fragile and probably collapses when it is used on a daily basis.

  Someone has an idea if possible otherwise remedy that is rented for a month in the repair? A loose connector, or something like that? I don't think that it may be a software issue.

  Thank you.

  First Windows button has stopped working, but now, after several weeks, the touchscreen so. I got replacement touch screen cable AP HM 00, 124 of the Lenovo service replacing the cable has solved.

  I guess that's a design flaw , because the cable is longer than it supposed to be (see photo) so it becomes distorted and there caused by a variable pressure on the bottom when cover stand by the fingers on the lower part of 3 mm approximately. Fixation by band does not help, because it always "bubbles" somewhere I hope that this will happen again sooner or later these other two cables (audio connector and display) is not the issue.

  

• Keyboard and HP Split 2 x touch screen stop working

  Good evening

  My touch screen worked fine a second, stop working the next day. Just the keyboard worked, so I rebooted and updated and when we turn back, the touchscreen still does not work. I stopped him once again, when he came back on, or the touch screen not the keyboard worked. It's okay if it is anchored or separated. I don't know what to do next. Still, it starts as usual and connects to the wifi.

  Thank you.

  Hey @Cherylrios ,

  Welcome to the forums of HP.

  I understand that the touch screen and the keyboard of your x 2 Split have stopped working.

  Without any type of input devices, it would be impossible beyond troubleshoot a hard reset. To do this, remove the shelf and hold the power button to 8 + seconds force a stop down.

  It may be better for you to call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the following link to get help from your region number: phone help around the world.

  Thank you.