XPS 8300 with AMD HD 6770 white video between 5 and 15 minutes after connection.

Similar Questions

• 3 monitors on XPS 8700 with AMD Radeon HD 270 R9

  Hello world

  Just a quick question. Can I conduct 3 monitors to a XPS 8700 with the AMD Radeon HD R9 270 card?

  I read somewhere that it supports Eyefinity, and in the marketing of the images I see 3 ports on the video card. an hdmi and a DVI and a VGA. Eyefinity normally uses an active displayport adapter. You don't know everything just not if I'll be able to use all 3 ports to control monitors. Or maybe use 2 ports from the dedicated card and the onboard port.

  Thanks in advance for any help!

  Steve

  I've never tested, but in theory, it should work.

• Helps to remove white spaces between SWF and content in Firefox

  I have referred a question around February 23, 2011, which was answered by HansG. I have been shearching for a solution for this problem and can't seem to find one that works.

  I get this white gap between my swf in my head and the below navigation bar. That appears only in firefox. I tried to put border = '0' in the line of type of object without success.

  Here is the link to the Web page: http://www.ramaire.com

  Any suggestions are greatly appreciated...

  Thank you

  Alex

  Add this to your rule .header-

  height: 285px;

• XPS 8500 with AMD Radeon 7570 - 4 are monitors possible?

  I have scoured the net looking to see if this is possible.  Many people have asked the question, but I don't see an answer.  People have done 3 monitors, but I can't find anything on four.  Thoughts?

  Thank you

  Hi nytravelor,

  As you mentioned in the post, there are only 3 connected monitors. There is no option to connect the monitor^th 4.

• Tecra M2 errors with screen: colors black, white & Rainbow fade in and out

  My laptop screen fades in and out with the colors white, black, grey and Rainbow. No command/function is able to accomplish. When I disable (using the power button) and back on, it goes back to wipe the screen. My laptop is currently useless. Someone had this problem? Any help for a novice? Thank you

  Hello

  The best thing you can do is to test it with the external monitor. If the external monitor shows your desktop well probably the LCD is faulty. By the same result on the external monitor, the problem may be caused by a faulty graphics card.

  That's all that I can say about it.

• I'm having a problem with my flash does not videos in youtube and loading games on facebook. Any ideas?

  Videos won't load on youtube.
  Games will not load on facebook.

  Hello ron, this is most likely a problem in the context of the recent update of the adobe flash plugin, please see the following article for common solutions: 11.3 Flash does not load video in Firefox

• Import of an opera with 3 cd but iTunes stores between them and combine them in an opera. How can I fix?

  I want to import an opera 3 CD into my iTunes. But iTunes pgm store separately and not combined with an opera. How can I fix?

  There are things you can do to change the tags that control the sorting, but also to change how existing tags to actually sort on the screen. A first guess, I suspect that your CD Rip themselves with a number of CDs as part of the name of the album and making sure that all 3 pictures have one name will bring them to the boot of all.

  Steve MacGuire alias turingtest2 - iTunes and iPod tips and tricks - grouping beaches in Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (old post on Apple Discussions http://discussions.apple.com/message/9910895#9910895)

  Quick response: select all the tracks on the album, file > info (or right-click > news > Details) and give them all a single "album artist", or check the indicator of "compilation" (as in https://discussions.apple.com/message/17670085#17670085).

  If they are several CD sets, you will also need to enter the appropriate information in the fields of number of disk.  If they are not a set of multiple CDs that you must always make sure any vacuum or disc number fields are properly defined.

  Another explanation of hhgttg27 August 2015 - https://discussions.apple.com/message/27784417#27784417

  If they won't even really check this August 2008 post by turingtest2 group temporarily change labels - https://discussions.apple.com/message/7904806#7904806 or http://www.samsoft.org.uk/iTunes/merge.asp - it works often but I have had cases where securities combined when a letter has been added but divorced when he was kidnapped again.

  If they are mp3 files are trying to change the version of the ID3 tag, which can cause iTunes to re - write the tags and clarify inconsistencies.  I use iTunes 7.5 (Yes, from 2007) so I can't tell you where it is in later versions.

  I had a case of grouping stubborn reality.  The tracks will be re-group in a way that has no meaning when I changed metadata.  Without going into details, I deleted tracks iTunes completely, then add the files and they are all grouped together correctly.

• Video clips gel and green screen after update Toshiba PC health

  Recently, I answered a message from my PC Health Monitor utility to download and update software. After that I can no longer to watch video clips online (for example clips youtube freeze and picture Gets Green and freezes internet becomes insensitive requiring stop restart.)

  I tried to download the graphic drivers intel but get a message that says: this application can be run on the PC, look for info from the manufacturer?
  Can you help me please?

  Hello

  Can you please tell us which model of laptop you have, what operating system you use and which driver you updated?

  I don't know if this will help but try to roll back OS to an earlier time using System Restore tool Windows.

• having problems with the installation of the operating system, updates and other disk after the installation of the new HD

  After you have installed the new HD, loading of BONES, but having trouble installing microsoft service Pack 1, but several other updates. Following the troubleshooting steps don't provide any assistance. can not load the disc to sound blaster. was originally on my system, just try to reinstall and I get a window telling me that I need to install my audio drivers first? Also experienced a few freeze ups today, would not respond to any action or orders, including the power button. Finally removed a/c and battery adapter pulled to do stop and restarted. Then he does a disk check, and then goes back to almost normal. almost, because it is not quite the same computer a few days ago. I have a dell Inspiron 1720, I am not at all computer savvy and I am very frustrated... Please help me!

  Hi Art,

  Thank you for your message.

  Here is some information about drivers and their update:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  "I went to the dell support site and downloaded what was in the audio position who has not solved my problem here either.

  What did you do with the file downloaded from the Dell support site? You double-click the file to run it?

  What version of the Soundblaster device you are trying to install? Some Soundblaster cards are not compatible with Vista.

  What do you mean by: "it's not quite the same computer a few days ago"

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• With the help of a PIX501 to secure and share an internet connection by cable

  Hi all

  I bought a PIX501 to secure my home cable modem connection and share it around my house. The PIX will act as a DHCP client (my ISP uses dynamic IP addressing) and use nat and DHCP break with my small number of inside customers.

  The default setting (set using the set up of PIX) seems ok - but I did a little "do-it-yourself" after some negative PIX customers I've read here in the United Kingdom.

  Specifically, I: -.

  -A refused requests incoming icmp (to make the "invisible" PIX to the outside world)

  -Created an access list to allow answers to my outgoing ping (something every geek network must be able to do)

  -The value "string fragment 1 outside" to drop incoming fragmented packets

  -Limit the number of connections to 200 and embroyonic at 50

  -Activated floodguard (although I don't think this should be necessary on such a lightly loaded network)

  -Compatible console logging so I have at least a bit of history of all attacks

  -Reduced some of the delays of the connection of their default values

  As I have a relatively new to this kind of thing anyone have specific advice or tips for a pix used this way?

  Thanks in advance,

  Andrew.

  When you work with ICMP, remember that [icmp] command to assign ICMP messages for the pix as the host, while the [access-list] command is used to assign ICMP messages that pass through the Pix.

  If you are using IPSec tunnels through the Pix, you can consider letting in string fragment of 2 sizes. IPSec creates broad enough to cause a lot of packets to be fragmented. Path MTU discovery would prevent, but many networks prevent incoming requests that allow the discovery to work. For this same reason, you can also consider allowing the Pix to get unreachable inside your host name if you the Pix end VPN tunnels. [icmp outside any unreachable towing]

  Floodguard is enabled by default and does not need to be enabled. It should not be necessary on a little loaded network, but it would be necessary at the time of a DoS attack if you are Pix does authentication "uauth" of traffic entering or leaving the network.

  If you are interested, the Pix can authenticate users inside before allowing the traffic leaving using RADIUS. This is useful in situations like a web server inside is attacked from outside. By the application of authentication for other traffic to leave for offending guests options are very limited. A timeout is used to trigger authentication again after some time. The [floodguard] is used to protect this feature "uauth' of the Pix.

  The Pix has signatures VERY BASIC integrated IDS that you can activate by using the set of commands [assessment of intellectual property].

  Enable SSH for authentication and encryption by generating an RSA key and saving it to Flash. [AC product key 1024 rsa] and [ca save all] disable telnet by removing all orders [telnet] and replace them with [ssh]. [http] should also be limited as much as possible for the administration.

• How to synchronize video between iPhone and creative cloud

  I wonder how do I sync my video from my iPhone to creative cloud. Is this possible?

  Synchronization is not available but you can download a video using the iOS app Adobe Creative cloud on the App Store on iTunes here or active site in your browser to https://assets.adobe.com/.

• Lines / white space between symbols and png using grid

  Hi all

  I am having a frustrating problem:

  I am importing a bunch of images png 64 x 64 pixels. I have my set grid in place to be 32 x 32 pixels. I have snap to grid on.

  I created my scene with a bunch of these tiles 64px and everything seems perfect and lined up in the editor.

  When I debug, however, as I move around the screen, sometimes I'll see a space or a line to the intersection of the two tiles.

  Is this a common problem? Does anyone know how can I fix?

  Thank you

  Ryan

  So, I figured this out. Incase this help anyone in the future:

  I was getting caught upward in the fact that the tiles were not perfectly aligned, but it is in fact my object camera was inbetween pixels, and this caused cracks between the tiles. Before I put in the position of the camera, I just used Math.Floor and looks like it has solved this problem.

  -Ryan

• Update for Dell XPS 8300

  Will be the 02 G-P4-2663-KR of EVGA Geforce GTX 660 FTW Signature 2 2 GB GDDR5 192 bits PCI-E 3.0 x 16 HDCP and the Cooler Master eXtreme Power Plus RS-550-PCAR-E3 550w ATX12V V2.3 power supply work in my computer Dell XPS 8300. I ordered end of March 2012 and he received mid April 2012.

  Hi FuzzyTrex,

  Dell XPS 8300 comes with Intel H67 Chipset and a PCI Express x 16 card reader for the expansion of video card options. Dell has tested XPS 8300 with the following video cards:

  • ATI Radeon HD 5450 5670 5770 5870 6670 6770 6870 6950
  • NVIDIA GeForce GTS 450 GTX 460 GTX560Ti GT545 GT420

  However, Dell has not tested 660 GTX video card with XPS 8300, many users have reported he will be working and compatible with the system.

  EVGA GTX 660 requires a minimum of 450W power supply and has a maximum circulation of power of 140W. As you said that you would improve the power of 550W, the video card should work with this configuration.

  For installation/replacement of the video card, you can view XPS 8300 repair here.

  Note: Make sure that you follow the instructions in the manual before installing the video card.

  I hope this helps.

• The upgrade of my Dell XPS 8300

  Hello

  Currently, I use my Dell XPS 8300 with set up the following:

  • Intel core i7 - 2600 to 3.4 GHz
  • 8 GB RAM
  • GPU: Radeon HD 5770
  • PSU: 460W (AC460AD-00)

  It has served me well but shows it's age while I was looking to upgrade the graphics card and the power supply if necessary. But this is the first time I did something like this then I'd some tips / warnings on the potential pitfalls before buying something.

  After doing some background reading, I was thinking get a GTX 970 and upgrade the PSU, but I would like to know, questions, I could deal with that. I heard there were problems with XPS 8300 bios don't do not work well with graphics cards. I am currently on AO3, but there is no problem if necessary upgrade.

  My budget is around £400-£500 if anyone knows the best ways to update my PC.

  Thank you.

  Consider using this for now until you can buy new. Spending that much on unnecessary updates are not handy on a computer that is a few years old. You have a good installation now - 8 GB of ram, big power, i7 cpu that is best for your motherboard - as long as everything works. New computers can easily be purchased for what your budget allows for upgrades. The only thing to consider is a video card a little better that your power supply will take place as well as better control that you can use when you get a new computer. Ignore the upgrade of processor since that is not worth the expense or effort for minimal returns. You most likely impossible to switch the cpu to a newer version without replacing the motherboard. I would make sure to have the latest and probably last - bios A06.

• XPS 8300 - Ethernet controller driver

  Hello

  Maybe one of you can help me understand this problem:

  I just did a new install of Windows 7 (64-bit, home premium) on my XPS 8300, given that I just put in a SSD and wanted to go back to zero with it. Everything went well, except for one thing: in Device Manager ethernet controller is complain he has not installed a driver... The chipset utility and all Dell for the XPS drivers are installed, however.

  My system has no WIFI, so I'm stuck without network on this computer...

  Does anyone have an idea to solve this problem?

  Try this

  There is a direct link to the XPS 8300 LAN driver from the Dell site.  This pop on a USB stick and install on your xps 8300.

  I also often used the utility to update the driver from the Intel site for my XPS 8300 (here downloadcenter.intel.com however, for analysis to be performed, you must of course a functional on the target system network connection.