XPS 8700 Windows 7 64 card reader disappears!

Similar Questions

• Dell XPS 8700 Windows 10 questions with SD card reader

  Hi, I bought a new Dell XPS 8700 three months ago.  It comes with Windows 8, even if I asked for preinstalled Win10.  The Win10 upgrade process was fairly straightforward.  However so far three times the SD card reader stopped working.  I fix it by reinstalling the drivers.  Its not working again and my USB stopped working also.  Is there a background process that interferes with USB / SD card drivers?  Anyone else noticed this behavior.

  Rgds Frank

  You can try this:

  Go into Device Manager, and then double-click the entry for your SD card reader. Assuming that he has one, click on the power management tab, and uncheck the box 'allow the PC turns off... ». Now, do the same thing in Manager of devices for all your USB root hubs.

  Then go to the options screen to win 10 powers, click on advanced settings and turn off hybrid sleep. Reboot and see if that helps.

• HP Pavillion NB231UA #ABA: Pavillion NB231UA #ABA Windows 10 missing card reader drivers

  Hello guys I have a laptop NB231UA #ABA. I have recently upgraded to windows 10 and now my card reader does not work and I can't find a driver for this work. Can someone tell me please in the right direction to solve this problem? I would really like my card reader works on Windows 10! Thank you!!

  Hello:

  See if the driver windows 7 works for you...

  This package contains the driver for the JMB38X Host Controller Card Reader in laptop models supported and operating systems. JMB38X card reader supports the following types of media: SD, MS, MMC and xD.

  File name: sp45180.exe

• Dv6-1001xx 4 GB of RAM, Windows 7 - xD card reader problem

  I did a fresh install of Windows 7 Ultimate 64-bit.  Before I did and was able to get everything going, or so I thought, got all the drivers.  Apparently the card reader will not read my Olympus xD 1 GB card.  Pilots are JMicron and even tried to uninstall and install the Vista drivers, no luck.  It can read a SD card ok, so I thought, must be the map, except that my written camera pictures of her very well AND I tried it in a laptop (Vista Home Premium 32-bit) DV2200 and the Ricoh card reader could read in this laptop, without any problem.  I have 2 other cards xD more little ones who do not read in the DV6, but are well within the DV2200.  I have read this map ok until I installed Win 7, when I was with Vista 64 bit.  I did my install of Win 7 by letting it rename my old Windows to Windows.old folder, so I guess this is a new installation and not an upgrade, given that I wasn't using an upgrade disc.  I'm puzzled!  Shows Device Manager driver technology of memory and below, 4 controllers: JMB38X MS Host Controller, JMB38X SD Host Controller, JMB38X SD/MMC Host Controller and JMB38X xD Host Controller.  All show they work properly.  I don't see anything else to understand my problem, but if you need more info, I will not provide it.  Thanks for trying to help me!

  Test your player on other xD Card.

• Problem with using Windows 8 SD card reader

  I have a desktop HP Pavilion H3V97AA #ABG, no model 8 p6 - 2304 has Windows running.

  How to view photos on an SD card using windows 8.  When the SD card is put in the drive, it does not open automatically, and I can't find a way to do it.  There is no SD reader showing in my Device Manager list.  I need help please.

  Hello

  Not all types of SD cards will be recognized in your PC. Use only SD and SDHC cards.

  Look at this MS post on SD card reader problems.  There are some excellent suggestions.

  Also, go to start and type in autoplay. Then on the right, click settings, and then press ENTER. You can then change the settings for each type of removable media.

• Media card reader disappears from leading to the card not being recognized under computer

  Original title: two years with media player card hardware/software problem?

  When I insert my card player media the G, H, I and J readers disappear which leads to the card is not recognized. If I completely shut down my computer, they come back and the card will read for this session. This does not happen if I do a simple reboot. My computer is not quite two years old and it lasts since almost the beginning. Dell has replaced once the card reader and cable three times and the motherboard. The last technician who came to me thinking that it might be a software Bus USB error. All drivers have been updated. I am at my wits end, because the problem does not happen whenever I inserted the card, but now, it happens more frequently. This problem seems to occur with the map of media player. And Yes, it happens with all Media Player cards. I mainly use this computer to upload photos. I was told NOT to back up my computer because, if it was a software problem I just would be to reinstall the problem once I did a restore. Is there someone out there who can help?

  Hi Chris,

  I was finally brave enough to install the updates of the firmware. I went from the 7.8 version version 7.12, but no luck. Initially, it worked, but once my computer came into fashion 'sleep', and I returned to use again, it didn't work. This has been a problem for almost all the time that I owned the computer. Very very frustrating!

  Any other suggestions, anyone?

  Thank you

  Sherri

• XPS 8700 - Windows 8 w / Intel Smart Response Technology re - install

  Hello community,

  My hard drive in my XPS 8700 failed recently. I got a replacement and have installed the new drive in the chassis. It's the only drive (2 TB), but I also (30 GB) SSDS for Intel Smart Response Technology.

  I have a problem with the OS / Intel Smart Response technology Setup. I'm trying to (re) install Windows 8 of the disc. When I run the installation of the OS, just after choosing language preferences a screen will appear indicating that a media driver is missing.
  "Load driver".
  A media computer driver needs is missing. It could be a driver DVD, USB or HDD. If you have a CD, DVD or a USB flash drive with the driver on this subject, please insert it now.
  Note: If the installation media for Windows is in the DVD or on a USB drive, you can remove it safely for this step. »
  I guess it's regarding the pilot of SORTS. I tried to put the pilot SORTS on a USB but it is not detected when browsing.
  "Load driver".
  No pilot of the plane have been found. Make sure that the installation media contains drivers and then click OK. »
  I need help ensuring the RAID and BIOS are correct before installing Windows 8 with TRIE. Currently, neither the SSD or HARD disk created a RAID Volume (note No changes have been made in the BIOS, but the existing RAID configuration has been removed from the SSD).
  Emergency assistance would be greatly appreciated.
  Dell XPS 8700
  Windows 8, 64-bit, English
  2 TB hard drive 7200 RPM SATA + Intel SRT (30 GB Lite-On SSD MSATA)
  24GB Dual Channel DDR3 1600 MHz - 4 DIMMs

  In collaboration with a Dell technician by CAT, we have identified the problem with the driver files SORTED on the USB. I tried to download from the driver and Utilities disc that came with the computer, however the correct files are not extracted from the USB.

  The tech located the driver appropriate and after extract the USB driver has been detected.

• Card reader keeps disappearing

  Hello. I have a HP a6614f running Windows 7 Professional 64-bit.

  Lately, my guard card reader disappears from my computer and stop reading my SD card. It is a problem that suddenly appears a year ago. I fixed it by closing the PC, by unplugging and then plugging in the media card reader connector. The problem would come back every now and then, but could be solved by using the same process.

  Lately however the problem that happens almost every time I take my SD card. I withdraw, snap a few photos on my camera, put the card back in and there is no green light on the drive or drives appear in my computer. I can solve this problem at once more have disconnected and reconnected in the connector, but it's tiring because it always forces me to shut down the PC and open the tower.

  Is there a reason why this happens and is there a permanent fix?

  I ended up buying a USB multimedia card reader.

• Tecra M2 - card reader does not work on Windows 7

  Hi all

  I installed Win 7 on my TECRA M2 and everything worked well at the same time... except for one thing! The SD card reader is not recognized (works well with XP).
  Hint please?

  Thanks in advance

  JP

  Hello!

  The card reader is listed in the device with the yellow exclamation point Manager?

  Normally, I suggest that you should try the Windows Vista driver card reader, but there is no driver on Vista card reader available on the Toshiba site.

  So it seems that you have to live with this problem or you try a driver from another laptop computer card reader

  Good bye

• Lenovo 3000 N200 card reader driver for windows 7

  I just installed windows 7 on my computer because vista made me a lot of problems. And during the installation of the drivers, I noticed that there is no driver for the card reader for windows 7. Card reader does not work with the driver for vista. Anyone else have the same problem? How do solve you?

  
  

• Satellite U920T - SD card reader error

  Toshiba U920T BSOD error and Windows 8.1 card reader

  Whenever I do a scan operation, the Format, copy or Delete on my internal SD card I get this error.
  KMODE_EXCEPTION_NOT_HANDLED or FAT_FILE_SYSTEM,

  I have tested everything, all the drivers are updated, and it happens even with laptop in safe mode.

  I even experimented with SD card formatted in Fat32, exFat and NTFS.

  This happens with the internal drive, if I use an external SD card reader connected to USB, isn´t there is no problem, so there is no physical problem with the maps.

  I use 2 SD, one of the other with 32 GB and 128GB.

  If it is inserted 32 GB, I'm doing a drive > properties > scan and comes the BSOD saying FAT_FILE_SYSTEM without number

  128 GB inserted, I do a scan and comes the BSOD saying KMODE_EXCEPTION_NOT_HANDLED no number

  Someone has an idea or my internal card reader must ensure?

  It seems that the internal SD card reader does not support the cards inserted correctly.
  According to the specifications of the laptop (user manual), the card reader supports SD, SDHC and SDXC cards card.

  Media card reader
  SD cards up to 8 GB
  SDHC card (4GB / 8GB / 16GB / 32GB)
  Card up to 64 GB SDXC

• 8460p: keep the smart card reader attached, even if the card is removed

  HP EliteBook 8460p

  Win 7 Pro 64-bit

  When a smart card is inserted, you are able to see your smart card reader in Device Manager. When you remove your card chip, the chip card reader disappears in Device Manager. Is it possible to always keep the smart card reader attached?

  According to the BIOS version (F.22) will there is a fix where you can set the power state of the smart card reader:

  '- Fixes an issue where the setup of BIOS (F10) does not display the power of smart card Options once the system is restarted. -Fixes an issue where rebooting the system (reboot) is slow after the modem is turned off in the configuration of the BIOS (F10). »

  But this isn't the case to find.

  Any suggestions?

  Concerning

  F27 BIOS and the new card reader is needed to solve this problem.

  old player = v1.20

  new player = v1.21

  /paasen

• XPS 8700 is this normal?

  So I did a test of stress with dells support Wizard and everything this past but for me it does not seem that the fans are moving fast enough and most of the time while the game crawls the fan at all. At the normal time to be under a stress test?

  CPU temperature - 45 degrees Celsius

  Disk hard - 40 degrees Celsius

  GPU - 85 degrees Celsius

  The computer is only 6 months old and is clean inside the dust.

  Specifications of the computer:

  XPS 8700 Windows 8.1

  12 GB of ram

  1 TB 7200 RPM HD

  Intel Core i7 4 Ghz @3.60 gen

  NVIDIA GeForce GTX 745 4 GB DDR3

  The problem persists, but thanks to Dell-chrism, the mobo works now A10 (as you have done, he suggested running with the /forceit under a CMD window switch.

  Chris suggested since I talk with EVGA on this subject, because he suspects she may be related to the 970 himself. I'll be send by filing a ticket with them very soon.

  Will post back here if/when I find a solution to this - thank you for your help and suggestion!

  Be it RESOLVED (update): towers, it was a problem of USB 3.0 - powered USB boot in the BIOS startup now allows my system boots right up. I don't know why install the 970 appears to have caused this problem (never had a problem like that with my EVGA GTX 760), but...

  Thanks to chrism and EVGA tech support (their response below) that allowed the solution!

  Hello

  ... You happen to have all USB 3.0 devices connected to the computer? I've seen where some XPS systems will be not cold start with connected USB 3.0 devices or USB 3.0 ports used. Another difficulty can be completely disable USB boot options in the BIOS menu. ...

  If you have any questions along the way, feel free to ask.

  Kind regards
  EVGA

• WPD file system volume driver, card reader, code 10

  Used to have a Vista system to windows 7 update on top and the card reader has worked without any problems, in fact a full install of windows 7, the card reader appears four times (once for each location in the card reader) 'device cant start code 10' 'WPD file system volume driver. " If for example, I put a Memory stick card in the slot, he then shows up in my computer as a drive can be used to read and write from.

  The external USB card reader that I keep with my camera also has the same problem. This works perfectly on XP and Vista on this PC, the internal card reader used to be in this PC also worked great on XP and Vista as well as Windows 7 which has been installed on top of Vista.

  I checked for new drivers for the new card reader, are none for Windows 7, so there should not be any question here.

  Looks like I solved, went into computer management, the Manager disk and found that they were not in fact assigned to the card reader drive letters. Seed it when the media was designed, windows a drive letter assigned automatically, once the media was ejected from the letter assigned was swept away, this caused the WPD 10 error, so I manually set a drive letter for each location on the card reader all errors are now gone.

• Please help trouble Code 43 error graphics card for XPS 8700 (as well as the disappearance of sleep/Standby Mode) (Windows 10)

  I got my XPS in 2014 and my warranty of service completed in 2015 Jan before I installed Windows 10. So since I've upgraded to Windows 10 I started having problems with by XPS 8700. Now, I have no guarantee. I thought he would go better once they have released an update of the BIOS and it did for a while unfortunately in recent months, I noticed two major issues.

  (1) upon the starting and restarting my computer, my monitor does not end up receiving the signal from the computer and remains dark.

  -Checking that it is not a problem with the monitor by testing with other computers

  -J' checked in the Device Manager and there was a next yellow alert for graphic cards / NVIDIA GeForce GT 635

  -By clicking on, he showed me this: Windows has stopped this device because it has reported problems. (Code 43)

  Unfortunately, it is not the only problem with the graphics card.

  (2) "sleep" my mode is gone (it is related to graphics and BIOS).

  -J' tried the go in power to add setting but it was not yet listed.

  -I went to the command prompt and looked powercfg.exe that's what I discovered:

  C:\Windows\System32>Powercfg - a

  The following sleep States are available on this system:

  Hibernate

  Quick start

  The following sleep States are not available on this system:

  Standby (S1)

  The system firmware does not support this standby state.

  An internal system component has disabled this standby state.

  Graphics

  Standby (S2)

  The system firmware does not support this standby state.

  An internal system component has disabled this standby state.

  Graphics

  Standby (S3) mode

  An internal system component has disabled this standby state.

  Graphics

  Eve (S0 low idle power)

  The system firmware does not support this standby state.

  Hybrid sleep

  Standby (S3) mode is not available.

  Now I really wish I could start or restart my pc without staring at a blank screen and the problem of code 43 with Nvidia GeForce GT 635. Also, I would if I could have the option to upgrade my PC to sleep. I really miss it and do not have to constantly reboot my computer to be able to see anything on the monitor.
  

  I hope someone can help me with these questions without having to reset the pc and reinstall, all over again, that the problem still exists in other cases (I don't have a copy of the installation of programs pre-installed dells so...). This computer is only 2 years old, it didn't need to be retired.

  NVIDIA GeForce GT 635 (PCI\VEN_10DE & DEV_1280) the card is physically wrong and needs to be replaced.