XPS430-SATA2-4 does not recognize drives

I am installing an SSD in my 5 years, with the latest version of the BIOS A01 and Windows7 32-bit XPS430.  SATA HDD / SDD and DVD are recognized by the BIOS, if I put them in the SATA ports 0 or 1.

DDI or DVD are recognized if I put them in the 2-4 SATA ports.  SATA is set to "RAID ON" if I select the alternative "RAID Autodetect / ATA ' there is no difference to be able to see a 4 SATA2 devices.  I tried to force the device plugged into SATA port on IT, but at the start, what the BIOS reports an error that the device does not exist.

I tried swapping cables and leads PSU so believe I eliminated errors here.  Philip Yip has been useful (see the thread), but without success.  My only thought would now connect the internal DVD to port eSATA via an appropriate adaptation set.

Can anyone in this community about me other suggestions?

Thanks in advance.

OK, this is not the procedure. You must locate the RTCRST_PSWD jumper on the motherboard. It should be on pins 3 and 4. Move to jump pins 1 and 2 for five seconds, then bring it back.

And, Yes, this will cause the system to lose all the BIOS settings. Then I suggest that you write.

Tags: Dell Drives

Similar Questions

  • Portege M300: Nero 7 Premium does not recognize drive - Mat * un UJDA765

    I am unable to write through Nero 7 premium on my laptop of protected m300.
    Nero 7 premium is not all recognize the dvd/cd rw burner.
    In the drop down menu drives availble to write, only the writer of images is displayed.

    Please help, if anyone knows how to fix the problem.

    I formatted the original installed OS and newly, MS XP sp2.

    It sounds everything works correctly on your laptop computer and the operating system recognizes the drive correctly. But only the Nero application makes some problems.
    Well, it's not easy to say why Nero does not recognize the drive.
    I recommend you to check the Nero Web site.
    You will find many info and tools for additional help.
    For example the infoTool can locate the fault.
    You can also try to use the Nero driver - CleanTool.exe and RegistryChecker.exe

    However, it is a 3rd party apps and I think you should ask for help using Nero.

  • CD/dvd drive does not recognize drives or media

    I have an acer aspire 5315, General windows vista home, copyright 2007 sp2,.

    Processor: Intel (r) Celeron (r) cpu, 540 1.86 GHz

    RAM: 1.00 GB

    system type: 32-bit operating system

    CD/dvd drive: TSSTcorp CDW/DVD TS-L462D ATA Device

    I ran pc fixer, detective driver program MAST of automatic service of microsoft. And no matter what I throw, it gives a message that the driver is corrupted or missing files. It is running on E: / drive. When you insert a cd with the media on this issue and try to run it manually. He gives the date and wants to format the drive. Don't know what to do, when I try to update the driver, it indicates the latest version is already installed. If anyone could help, I'd appreciate it.

    Thank you

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    --------------------

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • First project does not recognize drive

    It is a crazy problem. I am trying to open a first project I've been working a few days ago. I have not changed anything about the location of the media files. From the opening, see the media files dialog box opens indicating that this area is offline. I click on search. The drive that contains the media files does not appear in the dialog box locate even if it is mounted and displays it on the desktop. Other projects who have media on the same drive are fine and grateful for this player. I have all backup media. But I'd rather avoid relinking routine.

    Hi Geoff, there.

    Sorry for your frustration with the OWC RAID. I talked to the kind people at OWC for NAB and they have found a solution to this problem which is really weird, but apparently works.

    1. Select the OWC drive on your desktop.
    2. Press CMD + I to get the information for the reader.
    3. Click the icon of OWC for the reader.
    4. Press Delete, the icon disappears.
    5. Restart Premiere Pro.
    6. The OWC RAID appears in media browser.
    7. Reconnect your film now that the RAID is mounted in Premiere Pro.

    I hope this helps. Please file a bug here.

    Thanks to the staff at OWC to share this info with me.

    It really pay to NAB Show sometimes!

    Thank you
    Kevin

  • Setup does not recognize driver not

    Howdy, well, I'm getting more and more desperate. I'm reinstalling XPPro on my xw8000. As you know, you need to press F6, wait a little and then you will be prompted to load the SCSI drivers, downloaded from HP, put it on a floppy disk. Then I get "txtsetup.oem be found." I used numorous diskettes and re-uploaded the driver many times. I did this same procedure that precedes a happy successfully, so I don't understand what's not this time. Does anyone know?

    Of after this post, format the disk in the computer you plan to use and then redo the floppy and try it.  Who would have thought it?

    http://forums11.itrc.HP.com/service/forums/QuestionAnswer.do?admit=109447626+1251719861745+28353475&ThreadId=1011243

  • Pav 9517c: windows 7 does not recognize drive hp multimedia staff

    has had to replace the hard drive. Windows 7 drive multimedia staff recognzse (sp) used. need to replace all the hp software. I have hpd10000z to the Bay.

    Solved.  He has worked with usb port, but not in the media Bay. Tech has forgotten to connect the Bay to the motherboard after replacing the hard drive. They recon... now works

  • Tecra A4 - upload of Firmware does not recognize drive

    First of all, my CD/DVD-R + RW doesn't write not any CD or DVD for the last 3 years.
    Second - as always, when I get the toshiba on firmware updates, I tried to update according to the instructions, but I get the message not connected disk target.

    I followed all the instructions again more carefully, but no use. I received today a new update of the firmware. and I can not always up to date, I get the message "Target drive is not connected.
    No operation troubleshooting? Help? suggestions?
    This is the second update of the firmware that has failed. even the previous update firmware failed with the same error.
    Another question: why only the updated easy to use? Its complex process even for the updates. Throat!
    I was in a bit of hope that if I can update the firmware, it might help me to write at least CD now after 3 years... but even the FW updates do not work...
    Hmm... any suggestion why I can't write CD or DVD?
    I followed the suggestion given in my previous posts on the same problem of CD, but of no use writing finally! I would like to see the day where I can at least write a simple CD using my toshiba tecraA4. !

    I only have an idea why you can't record CDs or DVDs
    1. the player is default
    2. you have Sonic DLA installed. If so, uninstall it. The program changes RW optical drives of a hard disk. This is why written CD fail. There is no way optical writing as nero or whatever you use.

  • Want to reinstall XP but the computer does not recognize the cd drive and does not allow for any installation.

    Accidentally deleted some system files and now the computer won't allow me to install anything. Tried to install a new cd player to replace a corrupt, but it does not recognize drive. All the driver and OS install CD. Help.

    Fix missing files:

    Try to run the checker system (CFS) files.  Press start, select run, type: SFC/scannow

    SFC will ask your installation disc (which you must have if you are going to re - install), put it in the drive when requested.  Leave the SFC to replace all missing or corrupt files.

    To resolve the startup problem:

    Check your BIOS Setup and make sure the optical drive is enabled and listed before the hard drive in the boot order.  When you start, there will be a message, "type any key to boot from the CD-ROM."  Type any key (execpt shift, shift caps lock, NumLock, etc) will cause the CD to be initialized in the installation program.  (I use the space bar, it's an easy target.)

    In addition, it would be useful to know a few more things: 1) what edition and service pack level of Windows XP you are running?  (2) what is the model and manufacturer of the optical drive, please?

  • Why my mac does not recognize my hard drive or SD cards?

    I got a new Macbook Air last month. Since I had so much problems with it - mostly because if you plug in anything whatever in the SD card slot or USB drives, it does not recognize them. I own a mac before, as well as PC laptop dell, so I am aware of the problems when formatting the discs everywhere, but even when I plugged a new passport hard drive, the computer couldn't find. Similarly, you may not find all the SD cards when I tried to use the SD card.

    What is going with this? I am a photographer living, so I need constant access to these two. This new model has some new method for transfer of files from the external hard drive etc.?

    Close, then connect the mac to a power adapter, disconnect all external devices.

    reset the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

    reset all external then pulls even deleted

    Once you open a session reconnect the external hard drive

    If the drive is connected with a hub of party 3rd do not use it and connect the drive directly to the mac

    Connect the external hard drive and open Macintosh HD/Applications/Utilities/Disk Utility disk utility

    The drive appears in the list of external devices?

  • iMac does not recognize the hard drive device

    iMac does not recognize my new WD My Passport for Mac external hard drive.

    I have a late 2009 21. 5-inch iMac with Mac OS X Lion 10.7.5 version and I have USB 2.0 ports.  Memory is 4 GB 1067 MHz DDR3.

    I made sure that my Finder preference displays drives and external drives.  I tried to see if would recognize a DVD and it does.

    I was hoping to save my data to be transferred to a new Mac.

    Any help will be appreciated

    Hello amfisher,

    Thank you for using communities Support from Apple!

    If I understand correctly, you are unable to see your new external drive to an iMac 2009.  I'll be happy to try to help with this.

    So that your iMac to see it, it may be necessary to reformat the drive. The best format for use with your Mac's OS X Extended (journaled).

    Format an external hard drive for use with a Mac

    1. Connect the hard drive to a USB port on your Mac.
    2. Open disk utility.
    3. On the left side of the disk utility window, select your external drive (or one of its partitions).
    4. Click the delete or delete button on the toolbar.
    5. On the Format menu, choose Mac OS extended (journaled).
    6. Type a name for your drive, and then click clear.
    7. After that the drive is deleted, close the disk utility window.

    This should allow you to copy files to the disc.

    Your computer has software called Time Machine.  It is a fantastic software for backing up your computer.  Information on how to use Time Machine is available here:

    Use Time Machine to back up or restore your Mac.

    Using Time Machine is usually the best way to move all your files from one Mac to another Mac.

    Have a great day!

  • Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

    I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

    What is your indication that the DVD is not recognized?

    Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

    I did all the updates and it does not see the DVD in the DVD drive.

    If you put another type of disc in the optical drive, as a music CD, it is recognized?

  • External CD drive does not recognize the CD burned on El Capitan.

    Using El Capitan 10.11.5 and an external hard drive, I have burned successfully mp3 files iTunes CD - I can play on the computer itself - but an external CD drive does not recognize, even if the Player recognizes the discs once engraved on Snow Leopard and previous models.  What's wrong? I burn "at the fastest possible speed," as I have always done.

    What CD format?  If you burn it to a CD mp3 this is not very common for a standard CD player to be able to read those.  You may have burnt the other CD audio CD format.

  • I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

    I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

    Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

  • I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

    I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

    Reset the password.

    OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

    Shut down the computer.

    Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

    When you see the Apple logo, release the keys.

    Wait until the OS X Utilities window appears.

    Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

    in the menu dropdown.

    Terminal window is displayed.

    TypeRegeditdans resetpassword and press enter on the keyboard.

    Reset Password Utility window will open.

    Leaving the Terminal.

    Select Macintosh HD, if not already.

    Select the user account in the menu popup box under "Select user account.

    Enter a new password.

    Re-enter the new password for the user.

    Enter a hint.

    Click on the Save"" button.

    Click  in the menu bar, and then select restart.

    Open a session.

    When Keychain dialog box appears, select "create new keychain".

  • Satellite M40X-116 - drive does not recognize any CD or DVD

    Hi all!

    I have a big problem with my SATELLITE M40X-116; I was watching a movie when the image was just stopped and since my CD/DVD RAM drive does not recognize any CD or DVD. What can I do?
    Please I need your help as soon as POSSIBLE.
    If you know what could be the problem, please, just send an e-mail to [email protected]
    Thank you all for the cooperation
    Best regards
    Marian - Romania

    Hello

    to me, this looks like a hardware problem. It must be checked by the service, and perhaps that the drive must be replaced.

    Good bye

Maybe you are looking for