XSLT for found the substring

Hi all

Below we have id from the source system:

1111-000-2222-1234567890-333-4444-555

We need spend a different id to target the system such as:

target_ID1 = 1234567890 (i.e. the segment 4)

target_ID2 = 2222 (i.e. the 3 segment)

target_ID3 = 000 (i.e. the segment 2)

There is also a rule over there, that, if the segment 3 of source ID is less than 4 characters i.e. (222) then for target_ID, a '0' should be prefixed so target_ID2 will become 0222.

Please let us know how to achieve this using the XSLT, or if there is a better way.

TIA,

Bob

Hello Bob,

You can use the function 'substring-after' and "substring - before".

When you do:

sous-chaine-before(1111-000-2222-1234567890-333-4444-555,-) it will return you 1111 (i.e. the segment 1)

Then you can do substring-before(substring-after(1111-000-2222-1234567890-333-4444-555,-),-) and you will get 000 (i.e. the segment 2)

and so on, to get any segment you want.

For your another rule, you can use the string-length function if it less than 4 characters, you can contact the 0 to your channel.

You can do this by using XPath in BPEL.

Best regards

Daniel Dias

Tags: Fusion Middleware

Similar Questions

  • I found the solution for the problem of sound-acpi with Satellite P100-219

    Hello

    I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

    See you soon,.
    MIK

    Hi Mik

    As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

  • ENVY 750-197c: cannot download drivers Win 10? "We have found the drivers for your product...". »

    I just installed Win 10 (64-bit) on my desktop and I want to install/update the drivers on my computer because my internet on it is a little wonky (and in general I want to update the drivers anyway). However, when I go to the page "Software and drivers" and enter my name/type of product, I get a message saying "we have found the drivers for your product. Drivers may be in development, so please check back at a later date or visit the product home page. ». There were drivers available here yesterday. How long this change usually take? Can someone help me find the drivers of the template from another computer that might work for my computer? Thank you!

    Hello:

    It looks like all the drivers, specifications and manuals are missing from the pages of support again.

    This happened earlier in the week also.

    Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

    Whether the weekend will not help much either.

  • I FOUND THE SOLUTION FOR THE TX WIRELESS PROBLEM!

    Hi guys,.

    IM pretty happy problem because I found the solution for my tx 1219 us wireless!

    First of all, my laptop started with wifi problems. Then, when I tried to start, nothing has been posted.

    I read a lot of posts on forums that talking about changing the motherboard by HP.

    I sent my knees to HP in Argentina - where i live - and they had sent me a budget with a «renewed» system map

    I was paying, so I pretend a new.

    Tired and frustrated on the HP customer service: they dosen´t recognize their mistake. They dosen´t give me GUARANTEE AND they pretend a lot of money for something refurbished!

    I found a post where a guy - now away for me is 'God' - explains how to fix this problem yourself! AND a lot of positions where other guys did, and they confirm that it works!

    Here's the method. Feel happy!

    This post is for the repair of the range of following HP laptop: tx1000, dv2000, dv6000, dv9000, with AMD processors and graphic chips from nvidia (6150go).
    Symptoms are more, wireless wireless card are running out, are repeatedly, the laptop, it does not ignite until several attempts and finally the laptop turns on but he did not have no image in the monitor, in some models, you listen to some sounds.

    The cause is excessive overheating of the GPU from nvidia, which has powered up to 100 degrees or but tends to fail the welds that unite it to the mother of the card.
    HP already admitted the existence of the failure in the design of the card, and extended 2-year warranty, so that if even you can demand but the desirable thing is to do, the method I describe is simple and has worked in 100% of those laptop with this problem, prefer all must do it under your own risk.

    Step 1. -It is necessary to compile the necessary material: this is a 1-cent American copper currency or a currency that similar thickness now about a 1/16 of an inch, or a piece with these features, but the copper. also we will need a table lamp with a halogen centre, or the one with the normal centres but it is 150W or but case is that it heats up a lot. disipadora thermal paste of what they take microprocessors (sold at any electronics store).

    step 2. -Once gathered our components, it is necessary to remove the mother card and remove the radiator so that they are exposed to the microprocessor and the nvidia chip.

    Step 3. -Now, we are committed to the lamp, started to warm up a while, in my case I have tapeworm a gun to measure temperatures and saw that it was 134 degrees, once it is hot we close set, but the thing at latest, the graphics chip, but on the other hand, where all the solder points are seen We leave about 5 minutes, which were both that I gave him, no doubt, it can be less, depending on the source of heat, once that done this we have pressed with the fingers with force the graphics chip (care, it will be hot), which will be expanded by heat welding is to merge.

    Step 4. -Now, we put a little disipadora in the room by both parties and we placed on the graphics chip and put the radiator and arm!

    It is with the intention of wrong correct dissipation system design since the heat produced by the chip is transferred to the coin in copper.

    Copper is an excellent conductor of heat and thus provide the heatsink of makes, initially was clearly a very small between the radiator and the chip and when warm itself does not transfer not warmth to any party since not thanks to the air, it can, but the copper coins made this work

    Greetings

    Message edited by Wendy on 30/04/2009 21:02

    Please see the procedure on YouTube

    http://www.YouTube.com/watch?v=musu759LsT4

    Message edited by Wendy on 30/04/2009 21:02

  • When I insert a memory card in my PC not using windows 10 I suddenly for no apparent reason get a no found the message of photos. How to solve it?

    When I insert a memory card in my PC not using windows 10 I suddenly for no apparent reason get a no found the message of photos. How to solve it?

    Looks like you have a card reader malfunctioning.

    You can connect the camera to the computer via the USB cable provided with the camera to see if the pictures can be read like that?

  • Is there an easy way to create "the mouse on the text, to display the image" without coding it? I want an image to appear only when you move to a line of text. I found the code for it but I want to find an easier way. Thank you!

    Is there an easy way to create "the mouse on the text, to display the image" without coding it? I want an image to appear only when you move to a line of text. I found the code for it but I want to find an easier way. I'm creating a home page with a list of text links. I want to design as well as in the overview of one of the text links, a corresponding image is displayed to the right of the page. I also need a default image to rest all the time unless one of the other links text is hovered over. Thank you!

    Try to use a Widget for Composition in the Adobe Muse Widgets Panel.

    I would like to start with a blank publication.

    Place your text in the button area.

    Place your image in the display area.

  • Extremely slow synchronization of index of the substring

    Oracle on RedHat Linux x 64 11.2.0.2 (5,7)

    I created a partitioned CONTEXT index in a NOPOPULATE State.  The index is defined on a column of a table partitioned using an attribute NULL_FILTER and SUBSTRING CLOB.  I then used the following procedure to fill the files queued for indexing.

    BEGIN

    CTX_DDL. () POPULATE_PENDING

    idx_name = > "CONTENT_VALUE_IDX"

    part_name = > 'P_2012_12 '.

    );

    END;

    /

    This procedure seems to work for an appropriate period of time, but ended up with the following error:

    ORA-20000: Oracle text error:

    DRG-50857: error Oracle in drvddl. ProcessOnlinePending

    ORA-20000: Oracle text error:

    DRG-50857: error Oracle in textindexmethods. ODCIIndexDelete

    ORA-20000: Oracle text error:

    DRG-10607: index meta data are not ready yet for the DML queues

    DRG-50857: error Oracle in drdmlpo

    ORA-20000: Oracle text error:

    DRG-10502: 1766 index does not exist

    ORA-06512: at "CTXSYS. DRUE", line 160

    ORA-06512: at "CTXSYS. DRVXMD', line 42

    ORA-06512: at line 1

    ORA-30576: dictionary of the context error loading Option

    ORA-06512: at "CTXSYS. DRUE", line 160

    ORA-06512: at "CTXSYS. CTX_DDL', line 1366

    ORA-06512: at line 2

    However, the number of records that have been entered in the DR$ PENDING corresponded with the same number of records in the table that is to be built on this index.  So, I hope that this error can be ignored?

    I then try to sync the lines on hold with the following text:

    BEGIN

    CTX_OUTPUT. START_LOG ('content_value.log');

    END;

    /

    BEGIN

    CTX_DDL. () SYNC_INDEX

    idx_name = > "CONTENT_VALUE_IDX"

    memory = > "2000 M",

    part_name = > "P_2012_12"

    parallel_degree = > 16

    );

    END;

    /

    The process begins in parallel 16 and logs show the documents being indexed.  After about an hour or two, the paper then shows "Writing data index ($I) to the database." and then appears to process the data of the substring that the log shows "Substring writing data ($P) to the database."  This is the point that the parallel process begins to go to series.  Restraint begins to show in the data base.  Blocking the session indicates an expectation of 'db file sequential read' event and the sessions that begin to queue have a wait state of ' enq: TX - line lock conflict.

    $P TEXT table support is being filled and lines are deleted from the DR$ waiting for the table, then the process does work.  The partition which was being indexed has only 27 lines, however the process lasted a few WEEKS before I finally killed the process.

    There is a note on Metalink (parallel and series SYNC_INDEX text is slow when SUBSTRING_INDEX is enabled (Doc ID 840097.1)) which seems to solve this same scenario, but says that the problem should be solved in 11.2.0.2.

    Another sync non-text substring index with no problems.  The 'Oracle Text' option is valid in the data base and none of the CTXSYS objects are DISABLED.

    Someone at - it ideas?

    So, as you guessed correctly, the fundamental problem is that 16 parallel workers try to write to the table in the face of the claim and the substring by.

    Our solution has been to change the parameter MAXTIME sync_index something very short - a half hour - so that the amount of data to write was a little smaller and the claim was broken up more quickly.

    We did originally because we wanted more insight in the newspapers and the pace of progress in the indexing, but after testing with multiple values MAXTIME, we found that 30 minutes gave us the best overall in terms of indexed documents throughput / hour.

    Your values will likely change, but with a bit of journaling, you should be able to find a practice, if a solution is not optimal.

  • Take the substring of the value returned by REGEXP_SUBSTR

    I haven't used regular expressions really before and tried to do some reading on how it works.

    Im trying to parse a string to pull a specific value.

    Using an example, I found from Oracle, I could find something that is very close to what I want to do, but it includes the delimiter character, and I can't seem to find a way to get rid of it.

    For example

    SELECT REGEXP_SUBSTR ('COUNT: 88, NUMBER: 12345678, LICENSE: 123456789', ': [^,] +', 1.1) RESULT
    FROM DUAL;

    The result: 88

    It changes a little

    SELECT REGEXP_SUBSTR ('COUNT: 88, NUMBER: 12345678, LICENSE: 123456789', ': [^,] +', 1.2) RESULT
    FROM DUAL;

    I got a return of: 12345678

    Which is basically what I want, I want to be able to extract the values between the ': 'and the','

    The values can vary in length, so I spread using the substr function.

    If anyone knows how I can get just the digital output without the extra ':' face?

    Very much appreciated...

    Why not use substr with regexp_substr:

    SELECT SUBSTR (REGEXP_SUBSTR ("COUNT: 88, NUMBER: 12345678, LICENSE: 123456789', ' LICENSE: [^,] +'1, 1"), 9) RESULT
    FROM DUAL;

    Result:
    123456789

    I recommend that you do not simply include him ': ' but also the whole, Word such as "LICENSE:

  • I restored my files Carbonite - or thought I did - but they can't are not there - I thought I found the right file - please help! The steps did not work!

    I thought I found the right file to restore my files of Thunderbird for... or so I thought... This is the file with 8 random characters...
    Anyway, the tech of Carbonite had restored the files in a folder on my desktop. I copied the file and paste this file to Thunderbird.
    As the files are being restored, the system I warned that thousands of files were the same... I said to replace.
    I deleted my profile e-mail and closed before Thunderbird I did all that. Then I returned to my email account. But the restored files aren't there. Only my Inbox since the transfer. No old emails, no record, no contacts...
    I don't understand what I am doing wrong?

    Just wonder if you copied it into your profile as a subfolder or if it replaced your profile?
    How did you create your backup?
    What is a full copy, a partial copy or a compressed copy (zip)?
    You copied to "C:\Users\Regina\AppData\Roaming\Thunderbird\Profiles\9k2py1g1" which, you profile should have ended .default
    I guess it was a typing error in.

    Only if your 'Thunderbird restore' was a complete copy or if you develop a one zip

    For not to destroy anything try:

    • Rename your old profile fx 'X9k2py1g1. Default X"or move.
    • Copy your "Restore Thunderbird" (I think that it contains a folder with subfolders 9k2p1g1.default) so C:\Users\Regina\AppData\Roaming\Thunderbird\Profiles contains a new 9k2p1g1.default

    Try restarting Tbird

  • Why Twitter's Web site is not working properly; for example, the list drop-down settings?

    Many links on Twitter's Web site do not work in Firefox for Mac OS. For example, the 'gear' at the top of the page icon will not produce a drop-down menu so that I can disconnect. Instead, clicking on it sometimes produces basic account settings, but nothing else. The button "Compose a new Tweet" does nothing.

    I gave permission to Twitter to do anything and everything under "subject: permissions. I deleted all cookies on Twitter about the possibility that one of them has been altered. I can log into the twitter website and see other tweets.

    I'm running the most recent versions of the operating system Mac and Firefox and am not having problems with other sites I visit.

    Hello

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.

    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

  • When I tried to import pictures from my camcorder videos seem to be import of Strontium.  After finished importing is not found the videos at all.  Any ideas?

    When I tried to import pictures from my camcorder videos seem to be importing into "Strontium".  After finished importing is not found the videos at all.  Any ideas?

    What is "strontium"?

    There are 9 different versions of iPhoto and they run on 10 different versions of the operating system. Tips and tricks for dealing with issues vary depending on the version of iPhoto and the version of the operating system. In order to get help, you need to give as much information as possible. Include things like:

    -What version of iPhoto.

    -What version of the operating system.

    -Details. Full, a description of the problem as you can. For example, if you have a problem with export, then explain by describing how you try to export and so on.

    -History: Is it going hard? Everything has been installed or removed? -Are there any error messages?

    -Have what measures you already tried to solve the problem.

    -Something unusual on configure your? Or how you use iPhoto?

    Anything else you can think of that could help someone understand the problem you have.

  • Extract the substring of the string

    For the life of me I can not find a function to extract a substring of an existing string.  The closest I could find was SearchSplit String and replace substring, but none of them do what I want.

    That's what I want to do:

    Assuming that the string "Test String", the letters are in positions as follows:

    T e s t _ S t r i e n t
    0 1 2 3 4 5 6 7 8 9 10

    Now correct the substring offset 5 on position 7 (length 3):

    Substring = r t S

    5 6 7

    In Java, for example, you can easily do this using the code below:

    String str = "Test String";

    Substring of String = str.substring (5.7);

    There are no simple function to do this in LabVIEW?  If not, what is the best way to do it?

    Use String subset of index 5 and length 3.

  • Skype error: "Skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport...". »

    Sorry for the ridiculously long title, but that is exactly the error I get.  When I contacted my friends @ Skype that they just told me it's associated windows problem.  I thought, but the error message appear says SKYPE not Windows. Anyway, there is a certain irony in all of this that Skype is a Microsoft company. I'm absolutely furious since Skype perhaps in conjunction with Windows has developed a kind of points of failure...

    Original title: skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport could not be found in the dynamic link library.

    Please note that the thread referenced in 'Question (1)' has been marked as the answer by a moderator, and not by the person who asked the question.  It is highly unlikely that will help in the Safe Mode, starting in a start-up in minimal mode or sfc/scannow configuration. Of course, you're welcome to try these things.

    Uninstall and reinstall of Skype as suggested in "Question 2" would have been my first guess, but a bit of searching online suggests that it also assisted.  Again, try if you wish.  When you uninstall Skype, you will not lose your contacts.

    Research online, I've mentioned suggests that the problem is caused by software Kies from Samsung.  You have this installed on your system?  If so (or even if not), go to C:\Windows\system32 and rename avrt.dll.  You can call it avrt.dlX or something else you like.  Reset.  Let us know if that fixes the problem.  If it didn't, or he did something another break, you can always change the original name (this is why rename is safer than deletion).

    Reference: http://forum.renoise.com/index.php?/topic/31412-solved-ntdlldll-ntalpcsendwaitreceiveport-error-on-startup/

  • Windows crashes software when it cannot verify the Publisher * found the problem

    * Found the problem, thank you anyway

    I use Windows XP and IE8, and I am trying to allow the installation of ActiveX controls.

    I get the following warning of safety and error: "Windows has blocked this software because it can't verify the Publisher.

    To protect your computer, Windows crashes software when it cannot verify the Publisher. »

    I have read a dozen forums and tried all the tips. I don't know what I'm doing wrong.

    I tried going into the tools of IE tab and changing the security options to "allow software to run or install even if the signature is not valid.

    I unchecked the boxes to "verify signatures.

    I passed the security settings and select: fast for "Unsigned download Active X controls" and: ask the user 'initialize and script ActiveX controls not marked as secure..'  and 'activate' to 'run ActiveX controls '.

    I even added the IP domain in my zone of confidence and lowered my security level to 'low '.

    I also remembered to close and restart IE.

    I always get the error message when you try to leave the site to install ActiveX. controls.  FYI the ActiveX is remote viewing of a security camera.

    If anyone has any other clues that could help me with this problem I would be very grateful.

    Fancy

    Thanks James, but I found the problem.  There was an extra box that I neglected to "verify" that allowed to install unsigned files.  I thought I had checked and unchecked everything related but I missed a.  Scary lengths windows go to protect me! :)

    Fancy

  • Wzcsldr2.exe - Entry Point not found the procedure entry point apsGetReady cound not found in the library wlanapi.dll dynamics. apears after startup

    ---------------------------
    Wzcsldr2.exe - Entry Point not found
    ---------------------------
    The procedure entry point apsGetReady could not be found in the library of links dynamic wlanapi.dll.
    ---------------------------
    Ok
    ---------------------------

    Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

    Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    Do you see that you think not you should see and when you see it?

    If the system works, what do you think might have changed since the last time it did not work properly?

    Googling a bit (very little) reveals that the file wzcsldr2.exe or wzcsldr3.exe belongs to a kind of device from D-link wireless connected to your system.

    Fact that sound familiar and you have something like this installed?

    If Yes, then I would get the page Support D-Link and find the latest driver for any device you use and install it.  You may need to first uninstall your device running - I'm sure they must have instructions and tips for the procedure.

    They also have an active Support Forum where you can post your problem/question to see if people there can help you get there.  There is already some discussion in the forums about the problems you describe, but since we know absolutely nothing about your system, you should probably take it yourself.

    I found a few other ideas through Googling, but I don't like some of the ideas I've read and if you stuff worked before, what do you think has changed since the last time it worked correctly?  Did you update or reinstall your device from D-Link or drivers, lately?

Maybe you are looking for

  • HP laptop - 17-x007nm: plastic laptop parts

    Hellois it possible to get a new upper plastic (plastic behind the screen) for HP 17-x007nm laptop? Model number: 17-x007nmProduct number: Y0A62EA #BED (or YOA62EA #BED)Serial number: 8CG632Z1M (or 8CG632ZIM)Warranty: 1y1y0y

  • Satellite L500-12F - WLAN speed drops down

    Hello I have the troubel with my wireless network. I have the strength of the complete signal, but after a while, the speed drops to 78 of the MBP to 5.5 MBP and it remains there (but), and Yes before you sugest, I tried updating my drivers, even uni

  • Cannot find itunes on my windows 10 pc game

    my Vista PC is dead and no way to recover the files so don't want to download my iTunes on my new computer game library. However I don't see any way to activate iTunes on my windows 10 pc game

  • Disk replacement.

    My XP disc has been accidentally destroyed, but I still have the product key.  Can I replace a download?

  • Download emails, but I can't get the

    I have windows vista.  I wonder about the windows Messaging.  I've always been able to retrieve my emails, but all of a sudden, this has changed.  I watch Download emails in windows mail, then all of a sudden all new mails are gone.  I can't find the