XTEA encryption problems

I'm trying to implement the XTEA encryption for a project, but the values that I receive does not correspond really. Is there a known problem with this implementation

http://www.NI.com/white-paper/7520/en/

I managed to solve the problem. The encryt implementation, mentioned in vi is false, and all you have to do is to remove the forloop and send data directly key.

Tags: NI Software

Similar Questions

  • Wireless LAN on Equium A210-1AS connection with WPA-TKIP encryption problem

    I have a 1AS Equium A210 with Vista but cannot connect to the internet via a wireless router cable modem NTL using WPA-TKIP encryption and 5600 philips.

    The laptop shows the base station wireless with a beep sound intense but said that the base of the station is not responding or is hidden when I try to connect to the internet.

    I'm using the correct password.
    I am able to connect to the internet via the base station when connected via the ethernet cable. Other old computers connect wireless with no problems.

    I heard that some combinations of chipsets with Vista can be the cause of some of these issues.

    Clear advice or ideas on what I could try to get wireless internet would be greatly appreciated.

    Have you checked to connect the laptop to the router WLan with WPA encryption settings? Please do. You must disable the WLan encryption to test the WLan connection

    If the laptop could connect properly, then encryption is certainly the reasons why the laptop can not establish the WLan.

    Maybe your wireless network card does not like this on the encryption support or you simply have to update the Windows operating system and the driver WLan.

  • zBook 15 - SSD encryption problem

    Good afternoon everyone,

    I get the error message below.

    "An error occurred during initialization authentication pre-seed. (0x9a00).

    The problem is the following:

    1. Image, pushed to the machine using the Clonezilla software. It is a standard construction we have on most laptops.
    2. On-board HP encryption enabled. Recovery stored on USB key.
    3. Laptop has been used for a few weeks.
    4. Someone tried to install software of BeCrypt encryption on the machine.
    5. This, as expected (I wish they'd asked first), completely messed up the machine.
    6. When starting, we still got the encryption authentication screen. After the password, he would try to start windows and BSOD.
    7. To try to remedy the situation, I entered the password encytption and before she started windows, open a CMD window.
    8. Using DiskPart I wiped the drive and reinstalled Windows 7 from CD.
    9. The machine worked, would start through encryption (password entered as usual) and then in the new installation of Windows 7.
    10. Thinking that everything was OK, I relayed the Clonezilla image once more (without disabling the encryption)
    11. The machine now give the error at the top of the pole and the recovery key refuses to play ball

    No matter what anyone thinks could work to solve this problem and save the SSD?

    Thanks in advance

    FN

    Hi fenewman,

    Your ZBook 15 is a commercial product and get your question more exposure, I would say post in the trade forums. Here is a link to the forum Commercial Notebook.

    Thank you

  • RSA encryption problem

    Hi guys,.

    I use code below for RSA encryption. Always out.size () gives the value 0. but it's not throw an exception. Where is the problem? Please help me.

    module of the private channel = "2CmNWUxYnaX5A5musNu8D6mOsYlnguGV1m + CGp4pKHMM2KV0izVOUjDHnhNbWUOLQfSMId5bXkmIqYPTKZ2KqZ16GNt65ygUjJxfZlFmOMGicTADkaHciPP8ZIxQmBdtta0pqeRP5AD + FG y144BzfNWCAXkPlo7Vwph2dMvb8E plus";
    Exhibitor private string = "Collaboration."
    Private String data = "Welcome to Cryptography."

    Private byte [] RSAencrypt (byte [] data) throws IOException, NoSuchAlgorithmException, CryptoException
    {

    Cryptosystem of RSACryptoSystem = new RSACryptoSystem (1024);

    Expo of Byte [] = null;
    Byte [] modul = null;

    Try
    {
    Expo = Base64InputStream.decode (Exhibitor, 0, exponent.length ());
    Modul = Base64InputStream.encode (module a, 0, modulus.length ());
    catch (IOException ioe)
    {
    }

    If (expo == null | modul == null)
    Returns a null value.

    RSAPublicKey publicKey = new RSAPublicKey (cryptosystem, expo, modul);

    NoCopyByteArrayOutputStream out = new NoCopyByteArrayOutputStream();
    Engine RSAEncryptorEngine = new RSAEncryptorEngine (publicKey);
    PKCS1FormatterEngine fengine = new PKCS1FormatterEngine (engine);
     
    CryptoStream BlockEncryptor = new BlockEncryptor (fengine, out);

    cryptoStream.write (data, 0, data.length);

    int finalLength = out.size ();
    Byte [] cipherText = new ubyte [finalLength];

    System.arraycopy (encrypted text, out.getByteArray (), 0, 0, finalLength);

    String txt = new String (cipherText);

    } catch (Exception ex) {}
    System.out.println ("EncryptString:" + ex.toString ());
    }

    Thanks in advance,

    I found the solution. Need to close the two cryptoStream and out as below

    cryptoStream.write (data, 0, data.length);

    cryptoStream.close ();

    out. Close();

    Thank you

  • BlackBerry Curve 9300 encryption problems with files *.rem smartphone

    Hi all

    I encrypted my phone by using the password. Also encrypted Media card with included media files.

    Now I want to save the photos on my media card, but all are in *. jpg.rem extension. I tried to disable the encryption but the *. jpg.rem remains.

    My camera works fine and I have my password (thank God for the tht).

    All the post I saw up to present r guy who changed phones or don't remember password.

    I don't have the option of emailing photos for me, as the files I need total 167 MB.

    I'm on BB Curve 9930

    Please help guys...

    Thnx

    OK it got...

    The following things were made by me:

    (1) options-> memory-> Compression disabled.

    (2) options-> memory-> Support of = OFF mass storage Mode

    (3) options-> memory-> security--> encryption--> Media Care active =

    (4) options-> memory-> security--> encryption--> media files include = NO

    I left the encryption ON. Just like before.

    Then the phone connected to the laptop. Password on the phone and in the BBDesktop software entry.

    Presto...

    IM can transfer all the unenctrypted of pictures and videos with *.rem to my HARD drive.

    Hope this helps other ppl have this problem.

  • Dell Data Protection encryption problem

    Security framework for the DDP client, authentication and security tools tools have been uninstalled and we now cannont access our outlook documents or spreadsheets files.  Something was wrong with the uninstall, and we can't do a system restore to get it back.  Any help would be greatly appreciated.  All the files are locked and we have this problem as soon as possible.  Thank you very much.  The owner of the laptop can be contacted at If the laptop computer access is necessary.

    Thanks for your help in advance,

    Lee

    Dell support has finally got to level 3 or 4 they and used a (locksmith) program files unlocked.  The laptop will have to be re-partitioned, reformatted and windows reinstalled to the laptop on the right.  It works but has errors at startup and do other functions but not terribly annoying because the files could be recovered without encryption.

  • Bouncy Castle encryption problem

    Hello

    I want to add bouncy castle APIs in my blackberry JDE project, the problem is the file jar is added to the project, but if I tried to import any class in the castle of org.bouncy show the error like package does not exist...

    I tried the same thing in eclipse too but in the fact that she successfully added, but no use...

    I tried with adding another project of library also...

    By changing the names of packages and new recompile the java files, my problem has benn fixed

  • Encrypted problem

    Mr President, I got Windows7 installed on my machine. I have some encrypted files by using the right click. Then I got Windows7 and again once installed. But now I am unable to access. It shows that you don't have the permission to access. Help, please

    Mr President, I got Windows7 installed on my machine. I have some encrypted files by using the right click. Then I got Windows7 and again once installed. But now I am unable to access. It shows that you don't have the permission to access. Help, please

    BitLocker is good. It does not distinguish between a foreigner and you. You have a certificate or you can't read encrypted files (which is exactly what you had in mind when you your files encrypted). Take a look at this thread Bitlocker topic:
    http://social.answers.Microsoft.com/forums/en-us/w7security/thread/19f28028-EACE-4878-b5e5-8cd78c19f6f3
    The only way you'd be able to use your encrypted files would be if you have saved your file recovery certificate and your certificate of personal encryption (and private keys) and the data recovery agent certificate to regain access.
    BitLocker Repair tool to recover a disk
    http://TechNet.Microsoft.com/en-us/library/ee523219 (WS.10) .aspx
  • TECRA M2 and WPA/WPA2 encryption?

    I use a Macintosh Time Capsule as a router, but cannot connect with a Tecra M2 with card Intel (R) PRO/Wireless 2100 has LAN Mini PCI Adapter. The router uses WPA/WPA2 encryption? Why am I not able to connect?

    When I click on the network (which appears on the available networks), he doesn't want the network key.

    What is an encryption problem? This computer with this card cannot support encryption WPA/WPA2?

    In the wireless connection settings, you should see what Wlan encryption is supported by the wireless network adapter
    If the WPA/WPA2 encryption is not listed it then you will not be able to use it.

    In this case, you must change the encryption on the router WLan or will need to purchase an external Wlan (WLan USB key) that would support the WPA/WPA2 encryption.

    Welcome them

  • How can I disable the basic after you have reinstalled Windows 7 Home Edition with BitLocker Drive encryption?

    Original title: Bit Locker Drive Encryption problem

    . I bought my laptop with windows 7 home basic operating system. After 1 year my Software Engineer friend makes me Express Windows Ultimate.Then upgrade after a few viral problems, I recovered my system, then I went home base only. But when I was working with Ultimate, I used Bitlocker Drive Encryption.But when I got to the Home Basic edition, I couldn't stop this disc encryption. So please help me to stop temperature Drive Encryption.

    Hello

    Follow the described steps mentioned to turn off BitLocker.

    1. open the Bitlocker Drive encryption by clicking the button of theStart, clickingControl Panel, clicking Security, and then click Bitlocker Drive encryption.

    2. do one of the following:

    o to temporarily suspend BitLocker, click on suspend Protection, and then click Yes.

    o to turn off BitLocker and decrypt the player, clickTurn Off BitLocker, and then click reader to decipher.

    Check the link for more information.

    http://Windows.Microsoft.com/en-us/Windows7/help-protect-your-files-using-BitLocker-Drive-encryption

  • XP Remote Desktop can only connect to Vista once by restarting: error 0xc00002fd

    I am running XP SP3 and by connecting to a computer running Windows Vista by using RDP 6.1 (also tried 7.0) with NLA.  I did the configuration of the registry for SINGLE sign-on (although it reproduced without these registry entries with new credentials).  The first logon works perfectly.  That I disconnect the Vista machine.  Then the second connection comes with "an authentication error has occurred (0xc00002fd)."  I can never get another connection to work.  I reboot XP and it works again, once.  The error seems to be a sort of encryption problem.  If CredSSP is cached something that does not work?  Any help is greatly appreciated!

    Hi Brändli,

    • Is Windows Vista computer on a domain network?

    This error may occur sometimes if Credential Security Support Provider (CredSSP) is not correctly enabled. You can access the link below and follow the steps described in the article turn on CredSSP.

    http://support.Microsoft.com/kb/951608/en-us?p=1

    If the problem persists after you follow the steps described in the article above, you can access the link below and post your question in the theTechNet community, which will provide the support you want.

    http://social.technet.Microsoft.com/forums/en/VirtualMachineManager/threads

    I hope this helps. Let us know the result.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Intel WiFi Link 1000 bgn @ E220s: visible, but will not connect to access point

    Hello

    just got my new E220s - love it! Only problem is that I can see the wireless access points, but whenever I try to connect to them it says: "Windows could not connect to '.»»

    My setup is a Lenovo TinkPad E220s: Intel Core i5, Intel WiFi Link 1000 bgn, Bluetooth 3.0, 7200 RPM 320 GB HDD, 4 GB RAM, Windows7 Home Premium.

    My system is up to date with regard to the update of Windows and Lenovo BIOS update.

    * A tried to connect to a FritzBox 7141 (b, g, g ++ standards)

    * with WPA - PSK: entered the password-> problem as above

    encryption-> problem as above

    * Connection I tried with 'eduroam' (wifi popular education in the world)-> problem as above

    * Using the driver Lenovo 14.0.1-> problem as above

    * Manually install driver Intel 14.1.1.3-> problem as above

    'Manual Diagnostic tool' Intel:

    * test hardware: past

    * pilot: past

    * radio test: past

    * scan test: past

    * association test: failed

    * other tests: does not work

    Some diagnoses more Windows:

    Details about network adapter diagnosis: 
    
    Network adapter Wireless Network Connection driver information:
    
       Description . . . . . . . . . . : Intel(R) WiFi Link 1000 BGN
       Manufacturer  . . . . . . . . . : Intel Corporation
       Provider  . . . . . . . . . . . : Intel
       Version   . . . . . . . . . . . : 14.0.0.113
       Inf File Name . . . . . . . . . : C:\Windows\INF\oem14.inf
       Inf File Date . . . . . . . . . : Tuesday, November 09, 2010  8:43:32 AM
       Section Name  . . . . . . . . . : Install_MPCIEX_Lenovo_1000_HMC_BGN_WIN7_64
       Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0084&subsys_13158086
       Instance Status Flags . . . . . : 0x180200a
       Device Manager Status Code  . . : 0
       IfType  . . . . . . . . . . . . : 71
       Physical Media Type . . . . . . : 9
    

    Hello

    Problem solved. Of wire antennas was not of all attached to the card and the other it has established relationships by chance. It took me 3/4 of an hour to turn off the battery, remove the keyboard, attach wires to the NIC (quite difficult due to lack of space) and put it all together. Then everything worked fine.

    Thanks for the help, forum!

    E220s rocks!

  • iBooks/iCloud problem: all the books transformed into "encrypted files".

    I recently downloaded all my iBook (files PDF and epub files) on the iCloud / iDrive with the iBook on my iPad app. Many worked for awhile, but when I tried to use iBooks after a few weeks of inactivity, none of my downloaded iBooks were visible in iBooks. I looked in the iDrive and there is a section of iBooks, that seems to have all my old iBook (15 GB) files, but each file appears as "Encrypted File". I have no idea on how to decrypt these files so that I can use them again.

    The iBooks interface displays only the empty shelves.

    I don't know what triggered this loss of all my books. Anyone have an idea how I could recover my books?

    Overall, I must say that I am very disappointed with the whole iCloud / iDrive system. It took an eternity to download files, the data transfer is extremely slow and I'm not even able to download iBooks from my PC to the iCloud. I have much better experiences with Google Drive or Dropbox, which operate in a transparent way through everything, platform. I guess that the iCloud / iDrive works only in an all-Apple configuration

    I have the same problem too, all my files epub in the ibooks app disappeared after I have sync my iphone on icloud drive and when I checked the ibooks on my icloud storage it appears as "encrypted file.

    Help, please!

  • Windows 7 directory on the iTunes folder encryption is originally a problem of insufficient authorization

    Windows 7 seems to be encrypting random complete files in my iTunes on my drive folder hard ext.  This causes problem insufficient authorization (see If iTunes repeatedly prompts to authorize your computer - Apple Support).  Any ideas of how to avoid this?  The encryption because the album is to have some sort of time-lock?

    Sounds like a Windows problem, not an iTunes one. Do not encrypt files unless they need. You add an access memory load data within a treatment and run the risk that you cannot recover the data if the operating system crashes into the keys with him. Also not a good idea for an external drive that you might want to use it on several computers. See http://windows.microsoft.com/en-gb/windows/encrypt-decrypt-folder-file#1TC=windo ws-7.

    See fix for iTunes for Windows security permissions for the appropriate permissions to set on the files to iTunes.

    Make sure that the information SC folder mentioned in the document you cite is not subject to encryption either.

    It is perhaps worth noting that iTunes may issue a request to authorize when a download from the store is damaged in any way. Delete the affected file and download a new copy of the store usually solves this problem.

    TT2

  • I could not make a backup encrypted today, because I don't remember my old password. There is no option to use a new password or reset a password if you forgot it. Have you had the same problem?

    I could not make a backup encrypted today, because I don't remember my old password. There is no option to use a new password or reset a password if you forgot it. Have you had the same problem?

    ShapiroPE wrote:

    I could not make a backup encrypted today, because I don't remember my old password. There is no option to use a new password or reset a password if you forgot it. Have you had the same problem?

    No I don't have this problem.

    If you do not know your iTunes backup encryption, then you won't be able to use it.

Maybe you are looking for