Xw8200: Error on Boot to Sata cable

Similar Questions

• is it possible to set up a dual boot, so I don't have to stop, and then pass the SATA cables that I boot to change?

  Original title: Dual boot

  My XPpro on a former player, was upward. then, I got another new drive, installed Win7Ultimate.  Well, I got the OLD disk works with XP on it.  But, some of these apps DO WORK not on Win7.  so, at least for now, I have two drives installed on the same computer.  is it possible to set up a dual boot, so I don't have to stop, and then pass the SATA cables that I boot to change?   Operating systems already are on 2 different disks.

  Hello

  How to set up a Dual Boot Installation with Windows 7 and XP
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  Definitive dual-booting guide: Windows 7, Linux, Vista and XP step-by-step
  http://apcmag.com/the_definitive_dualbooting_guide_linux_vista_and_xp_stepbystep.htm

  Dual Boot computer preinstalled Windows 7 with XP
  http://www.howtogeek.com/HOWTO/8790/dual-boot-your-pre-installed-Windows-7-computer-with-XP/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error message @ boot Win 7 Pro "it was Aproblematique from C:\programdata\ofpviaowu.dat - the specified module could not be found."

  Error message @ boot Win 7 Pro "there was a problem starting C:\programdata\ofpviaowu.dat - the specified module could not be found."

  This error message appears whenever I have start my computer and windows starts (Firefox doesn't start up). 15.01 Firefox work properly otherwise.

  This started after I installed the 15.0.1 patch.

  I uninstalled and reinstalled Firefox but the problem remains. Search Google for "ofpviaowu.dat" came with "2012-08-29 Firefox version 15 startup Crash Report" as the only listing.

  Is this a Firefox problem?

  My system has this file: C:\ProgramData\Mozilla\logs\. I don't think that Firefox or update service should write directly to the root of C:\ProgramData\. It could be a configuration error, or it could be completely different.

  You may be able to remove your boot sequence problem .dat file using Microsoft Autoruns utility: Autoruns for Windows. If you find an entry, can describe you it?

• ENVY h8 - 1520t: error: no boot disk was detected or drive failed.

  Yesterday, when I turned on my computer, it was really slow and I could not open any programs. Then it went all blue and white. When I rebooted, I see "control the presence of .media, media, start the PC via ipv6, then error: no boot disk was detected or the disc has failed." I tried to hit f11, but it fills the entire screen with the error message. He died or hope?

  Looks like your hard drive has failed.

  You need to maybe replace the disk and reinstall Windows.

  Please use these instructions to test your hard drive.

  * Works even if your PC will not boot to Windows.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb. If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• 23 - k027c: ERROR: no boot disk was detected or drive failed

  Hello!

  My computer

  HP Envy tilt 23-k027c TouchSmart all-in-One desktop PC (energy star)

  These latest OS Windows 10 (update of Windows 8, which was preinstalled on the computer at the time of the purchase in December 2013)

  Intel (r) Core (TM) 15-457OT CPU @ 2.90 GHz

  Processor speed 2900 MHz

  A few days ago it started showing blue screens of death with a PAGE_FAULT_in_NONPAGED_AREA note all other hours, or sometimes 3 times per hour.

  I went through all the troubleshooting process, finished with a bluescreen debugging possible analysis demonstrating that the ntoscrnl.exe driver might cause the blue screen issue.  And on the morning of the next day my computer greated me with a black screen with an ERROR: no boot disk was detected or drive failed.

  I can still get into the BIOS by pressing ESC at the present time of HP sign appear early attempts to restart.

  BIOS indicates that the hard disk is detected (yay!), so it is not the source of the problem.

  Memory and disk test went well passed, PASSED tests successfully.

  Pushing ' restore the original and exit "in the bios does not help.

  Nothing else works. Only these two ESC and F10 keys.

  How can I fix the system?

  I don't have a HP with PC Restore disc when I bought it. Site Web of HP didn't kits of restoration for the moment.

  What to do?

  SOS help, please!

  It is the computer that I use for work and personal use. There are gigabytes of photos of my family, as well, who desperately, I don't want to lose...

  I'll be super thankful for all reasonable advice and direct instructions!

  The ' ERROR: no boot disk was detected or drive failed. "  May be a simple solution to redo the botmanager file.  This normally requires a bootable DVD with the repair function or a USD bootable with windows and repair function.  Windows 10 is installed, this would be my choice getting either the drive or the USB key.  HERE IS THE MEDIA tool of M$.  Make the work of another PC, DVD or USB and then - on PC - start problem that media and choose repair when loading of the POPup screen.  DO NOT install.  If you install it, it will eliminate your data.

  BTW: 10 Windows is installed, the HP recovery disk will return the PC to Windows 8.

• HP pavilion 15-n005sx: Find sata cable model

  HDD Sata cable was mussing my laptop... so any body help me find that midel

  Hard disk hardware kit, includes: screw the HDD cable 732071-001 disc rubber disc hard connector (2, not shown)

  HP wants to $73 for it (ouch):

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=F65CBC13C0614ED58B8C2473046883A8 & Searchin' = partnumber & SearchPN = 732071-001

  It's here for $4 on eBay:

  http://www.eBay.com/ITM/732071-001-HP-15-N211DX-hard-drive-hardware-kit-grade-A-/162108474313?hash=item25be6b03c9:g:HeQAAOSwM4xXZMAY

  Ships in many countries but let us know if you live somewhere else.

  If it's 'the Answer' please click on 'Accept as SOlution' to help others find it.

• My computer makes a clicking noise at random - in the diagnosis of the Apple what is the meaning of error 4HDD/30 / 40000005:SATA (0,0) Please?

  My computer makes a clicking noise at random - in the diagnosis of the Apple what is the meaning of error 4HDD/30 / 40000005:SATA (0,0) Please?

  Several clues:

  1. HARD and SATA drive in the message... On the way SATA HARD drive
  2. Clicking noise, which is an early signal of imminent death for HARD drive (there are only two types of readers... those who died and those who will be)

  I would like to start keep good clones (CarbonCopyClone, bombich.com, $40) for external drives or backups Time Machine.  Any backup of the drive, not just your favorite parts.  Perform backups on a schedule without fail IMHO.

  You can also start to consider a SSD at macsales.com (their mercury collection is highly recommended) or a new HARD disk, at least start planning if the SSD cost is worth the benefit of speed on the HARD drive.  You can buy it later.

  Just my paranoid approach to this situation.

• Error No. Boot Disk was detected or the drive failed - h8-1020 Desktop

  1 hp pavilion HPE h8-1020

  2. windows 7 64 bit

  3. Realtek PCIe GBE Family Controller series v2.38 24/12/10

  Error: No boot disk was detected or the drive failed.

  4. no changes to the system.

  After I restarted my computer about 7 times it finally started, so for me to be able to write this message.  However, this problem occurred several times over the last week or two. I get a blue screen, then the computer goes into a splash screen and I get the above error.  Of course, I'm 2 months past my warranty period, so I'm here, GROUND.

  Is my hard drive on its way? Is there a possible difficulty for this seizure completely breaks down?  Information to help save my machine would be great and much appreciated.  Thank you!

  P.S. I ran a diagnostic and all past test except the bootable disc.  But for some reason when I restart a little more time it get passed my system and begins running.

  Note: I created recovery discs and I backed up all my files.

  Hello:

  In my view, there is nothing you can do to repair the drive except to replace it.

  You can run the checkdisk utility and check both boxes.

  Please see the link below for more information.

  http://www.w7forums.com/use-chkdsk-check-disk-t448.html

  Please understand that this will only delay the inevitable at best.

  Paul

• need to replace the SATA cable, cannot find the right

  Hello

  My HARD drive to my motherboard sata cable is broken and I need to replace it and I can't find the right cable, I hope you guys could help me and give me the correct link, I would like to buy an alternative and not of HP parts store

  I have a hp pavilion 2255sb g7

  Thanks for the help!

  Jonathan

  Here is the part number you are looking for:

  Not illustrated material hard drive Kit (includes hard drive support and support)

• For HP 2000 protable PC sata cable

  I need to drive hard sata cable, I see some on ebay p #(informations personnelles par modérateur) but the part # on mine is (personal information by moderator) will one on ebay work? or how to make the right cable?

  Model HP 2000

  Hello

  You buy the right part. You can buy the right part of the store of the part:

  http://PartSurfer.HP.com/search.aspx

  Kind regards.

• How to fix this error: "MPT Boot ROM - no device found!"

  Ideas: my IBM Intellistation Z Pro 6221 boot from IDE hard drive. Error message "MPT Boot ROM - no deices found!" error message is displayed. Machine will start from a USCSI drive when it is connected. IDE drive is then recognized as drive D: to hard drive which does not physically OK. Normal order of BIOS. While that started from the drive SCSI Windows detects the IDE drive and after a reboot, I get a message that says that the ROM of the MPT Boot has been installed successfully. But when I disconnect the SCSI disk and then try to boot from the IDE, I again get the error "MPT Boot ROM - no device found!"

  Does anyone have a solution that will solve this problem and get the IDE drive to boot normally again?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Macz51,
  Thanks for posting on the Microsoft answers Forum.  The ROM of the MPT Boot part of the SCSI controller.  So, when you disconnect the SCSI drive, you will get the error message.  If the SCSI controller is a card, you can remove it, and then check your BIOS settings to start the command and make sure that the BIOS sees your IDE drive.  If you have problems with the hardware being not recognized before it starts with Windows, then you will need to contact your OEM for support. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• HP dv7 6058eo second hardrive / sata cable

  Hallo

  where I can find kit sata cable to my second hardrive?

  Please consult the service manual (Page #56)

  http://h10032.www1.HP.com/CTG/manual/c02842278.PDF

  The manufacturer is 641306-001 , which can be ordered here

• Want to 700-414: SATA cable to drive 2nd on Envy 700-414

  In seeking to add a second internal drive, there is no motherboard SATA cable.   It's disappointing.  Where can I get a cable?

  Hello

  NewEgg.com or most electronics stores like Best Buy should have SATA data cables.  A cable SATA III about 12 "long should suffice.  In addition, wiil you need 4 x HP Compaq blue screw 6-32 SFF Hard Drive isolation mounting Guide-450712-001.  Review the results of Google for 450712-001.

  These HP How-to - articles should be useful.

• Need to recover files with error Unmountable boot disk on the netbook.

  I have an acer aspire one netbook I've used for three years by the school.  I have many files on this netbook that I have not yet backed up and I get the error unmountable boot when XP tries to start.  Questions:

  N ' not have a CD player.

  Have unmountalbe boot disk error

  -need to recover files

  -need to restore xp to a usable state.

  Thank you for any useful contribution,

  LJP72

  Hello

  ·        Remember to make changes to the system?

  It may be that your hard drive is damaged, I suggest to run chkdisk\r and check if you are able to boot to the desktop. To do this, you must boot into the recovery console, and then run the command.

  a. Boot into the recovery console. Check the steps that are mentioned in the link given below.

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

  (b) to fix the errors, look for bad sectors and recover readable information, at the command prompt, typechkdsk volume: /r, and then press ENTER.

  I suggest you return the item mentioned below.

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

  http://support.Microsoft.com/kb/297185

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.