XY graph question

Similar Questions

• timestamp XY-graph question

  Hi all

  I'm sure that it's simple, but I can't understand what is wrong with my xy-graph. I read a timestamp string to a waveform data file and convert it into a timestamp format. I then traced data vs. time.

  The timestamps look OK, but the plot is all out of whack. I have attached a simple example. Can someone help me and see what I'm doing wrong?

  Thank you!

  Hi Kevin,.

  I think that the plot it correct because there is no data for almost 1 month IE 06/09/2012-09-7 - 2012.Please check again.

  Kind regards

  SrikrishnaNF

• Behavior strange screen/video Satellite Pro P100-109

  I have a strange problem with my Satellite Pro (P100-109 model pspa3e 00n009du). I edge video card printing is letting me down, so if anyone has a solution so please help!

  Yesterday, while working properly since I bought the machine, I had a strange video behavior. Black icon arround windows not updated correctly etc.
  After a restart of the system, these problems seemed resolved, but it lasted just a view minutes.
  After awhile, I got a blue screen (BCCode: ea BCP1...) BCP4:00000001 SP: 2.0) learned Internet research that his had to do with the video driver.

  Symptoms of the display:
  -Vertical dotted lines shown on the screen of the bios toshiba (variety of colors)
  -Loading of Windows show a few vertical lines as well
  -After loading the clickable elements appear black (not titles of window - no buttons shown/rendering)
  -L' screen goes black every 4 seconds
  -System responds very slowly, but sometimes it seems that it works normally
  -mouse disappears
  -After awhile that I get a black screen, system does not answer more.
  -In windows safe mode (so do not using the nvidia drivers), the display seems to work normally

  DID the next trying to solve my problem in vain:

  -J' I uninstalled/removed the nvidia drivers and installed the last on the toshiba site.
  -Deletion of original and installed drivers drivers Guru3D site (also used the Driverutility from the same site).
  -J' I uninstalled/removed the nvidia drivers and installed the original
  -Upgrade to SP3

  Uninstalling the driver (in safe mode) and so to use a generic driver only seem to work.

  Anyone know how this can be resolved or are these signs that the nVidia GeForce Go 7900 has been roasted.

  Hello

  Long story. short answer...

  It is really possible that your GPU chip malfunctions.

  I came to this conclusion because the laptop don t symptoms occur if the graphics driver is not installed.
  If the graphics card driver is installed the graphics card would go with the best performance and possibly graph questions would appear once again.

  I think that you can't do anything to what might solve this problem outside to contact the ASP in your country and ask for help.

  Good luck

• Blue screen after downloading DirectX

  original title: Possible graphics problem

  The story is: I came across the site to download DirectX programs. Once the download is complete, I guess that the downloaded file itself stuck on the original file, but I suddenly got the blue screen and my computer off. I'm not a stranger to it, but when I'm ready to understand the problem, my computer would not start. Of course, I see the screen saying that windows did not close properly and to recommend that I have run the Startup Repair tool. However, when I press on enter, the screen appears again. I chose "Start Windows normally" and the computer did a disk check. It restarted again, but on my computer, when loading Windows there is a small bar that crosses the screen several times. It is usually on about 15 to 20 seconds, but he remained for more than a minute, this time, then the cut screen (which is normal), and then it restarted abruptly again. I remembered that there is a way to do a system restore without having to connect, so I tried it, and the computer restarted again. I tried to run safe mode, but that no longer works. It just seems like anything where the mouse can run does not load. I don't know if it's a kind of graph question because I am trying to download DirectX, but it seems that he. Moreover, in the start menu, I chose "LAN start" and he said that it was a test of media or something, but then he says that the test failed and to check the cable. There was a code, but I forgot. Something with a P. I don't know what cable it means or if this could be a factor. Any help would be appreciated.

  Hello

  Everything you did corrupt the existing installation. Using the option boot LAN would do nothing for you, that is used to install windows from a network, not repairs.

  Your best bet would be loaded from the recovery console or safe mode with system restore command prompt. If this fails, you might have to reinstall Windows to repair the file system damage. You will need a Vista installation disc to access the Recovery Console, from here, you can run rstrui.exe to start the system restore.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Export the graph to image: a few questions

  A few questions.

  (1) what does export average image "simplified"?

  (2) the invoke node export the Image export the image or simplified?

  (3) export the image to a .eps file, what I get is a picture of real vector graphic?

  Thank you

  (1) simplified - essentially data plots in graphical format, - without control shadows, white background, solid black grid lines. Try to copy it to the Clipboard, paste into paint, you'll see.

  (2) export Image - simplified (only for graphics). Get the picture - picture of the graph (any control)

  (3) generally labview does not know the vector graphic images, and maybe that this exception, since it is simplified to the rowset.

• questions about XY graph

  Hi, I think that a lot of people have already asked this question, but I couldn't find a solution to my problems below.

  1. I would like to draw multiple axes on the same x-axis (time) using XY charts. The reason I use the XY graphs is that I have given (amplitude and timestamp) in a table, so it would make sense to directly draw the berries as it is, rather than using a loop for draw 1 item at a time.
  2. I like to stack several axes just as maps of waveform to XY charts, don't know if it's possible to do?

  Did anyone tried something like this before?

  LV_Enthu wrote:

  Ben wrote:

  One of my favorites

  An array of clusters of berries of clusters.

  

  Ben

  This seems very confused, can you please share a photo of these vi?

  No, but I'll ry to explain. From the end of the expression and working to the left.

  Incubators - a cluster with two values, an X and a Y. The cluster is a point chart.

  Tables of business incubators - the table is one of the plots on the chart.

  Clusters of... - LV don't let you do paintings of paintings (which would be a 2d table) so each piece wraps in a cluster.

  An array of clusters of berries--each table is one of your parcels.

  Ben

• Question on how to data field/table/graph xy

  Hello-

  I currently have a VI which reads in information through the DAQ Assistant, in two tables of waveform (load / time) and the displacement / time. I would like to be able to take this information and draw another (load vs displacement). I have converted the sets of dynamic data from the charts of waveform in both ways (load and displacement) and then them grouped in an array of clusters. I tried adding a waveform chart in the table of cluster, however it does not seem to be traced. (It is located in a loop so that it must constantly be updated because the control is underway.)

  I would appeciate any help you may have. Please let me know if you have any questions.

  Thank you for your time.

  A graph is just simply not true, if you want to draw one table against another. This is what a XY chart is for. Just take your existing arrays and group them together. If you turn on the context-sensitive help (and it really takes on all the time) on the block diagram and move your mouse over the graph, it shows you exactly how to wire the data. Given a graph is a no story, you will need to implement if necessary. There is a graphic called example XY or just look for the Board of Directors. Many examples that use a couple of shift registers. The graph XY Express can be used as well.

  Don't know why you want in a separate loop. Place it next to your written chart would make as much sense.

• Question of stupid graph OBIEE 11 g

  Hi, I have a really stupid question of the graphic on OBIEE 11g. I have the following in the criteria tab:
  
  Fiscal year
  Accounting period
  Business unit
  Spend the amount
  
  I want to do a simple line chart showing Plastica as a command prompt, the 4 exercises like colors of different lines, 12 accounting periods as the horizontal axis and the amount of expenses such as the vertical axis. Sounds simple enough, but no matter what I do, I am unable to move the "measure of labels" tile in the graphic editing page. It seems to be 'locked' in the lowest position of the "Group By" box. I don't seem to be able to move it, exclude, etc..
  
  The problem is the presentation is as follows: through the axis labels, instead of just saying "1" to "12", all end up by saying '1 spending amount', 'amount to spend 2', 'amount to spend 3', etc.. This puts a shit ton of excess there and it is difficult to read the axis (if you are in a few Stephen, it will add it detaches completely in the eyes of the data area of the chart, where they should be). In addition, since the "chart title" and "The Vertical axis title" already say 'Spend the amount' - it is completely useless. When I look at the properties of the graph for the 'Horizontal axis title' it just says: "Accounting period", not "measure Lable + accounting period".
  
  Can anyone help - it's super basic, but it's driving me crazy and the graphic is horrible.
  
  Thank you
  Scott

  Scott,

  Not a stupid question rather stupid bug! I guess you are using 11.1.1.5.We had previously faced the same issue a SR. It's a bug! Bug hotfix request: 12810141, this solves the problem.

  Rgds,
  DpKa

• QUESTION: SE 2012 data display returns to the time graph each time

  Hello

  I have SigExp 2012.

  If I try to add a data view and make a pledge of graphic style, thermometer, etc., as soon as I have the right up until it clicks, add my TC chain, the data view returns immediately to a graph time.

  In addition, even if I use the graph of time, once I added the signal, it only let me see the string in a table, a chart of time or a waveform graph.  Those are the only choices.

  If I use a graph of time or a band of waveform graph, it does not read the signal correctly, but I can not configure the data view, the way I want it.

  Is this a bug or I do something wrong?

  Thank you!

  This occurs when you try to change the display of a signal in its raw format "waveform".
  You must convert your signals in scalar format. To do this simply add an amplitude and levels step (under: analysis > measures Time-Domain). Drag this DC signal newly converted to a new chart and right click on the graph to change the display.

  Honestly, I'm not sure why raw waveform signals are inherently limiting viewing functionality, but in such cases, it is.

  You can also; According to the devices on which you use and the order in which you add to your DAQmx Acquire, some default signals step to scalar signals without having to convert.

  See the attached screenshot and you'll see how the icons are different between the waveforms and scalar signals.

  Hope that helps

• Impossible to get Graph.DataSource to work in WPF, I (thread question?)

  My chart is work beautifly when I use:

  chartCollection.Append (measure. GHz, measurement.dB);

  But when I try to use this call to the same method, I get nothing on the graph:

  Double data = new double [256];
  
  ....
  
  Graph DataSource = data;

  I know not if there is a suspicion, but I declare chartCollection on the main thread, and then pass it on to a different thread to collect data and it draw in real time.

  I could have lived with chartCollection.Append but in this case, I got a lot of data instanteneusly and I want to assign to chart at a time.

  Moreover, it seems that you need about 350 ms differ between each card. Add to not cause exception... but in my case I need to delay in all cases (for data) is not a problem.

  Thank you!

  I'm not very clear on how you mix the table/matrix updates. Here is an example of chart queue adds via the dispatcher (using a class task and assistance as a quick way to simulate the substantive work). You can use any delegate with the dispatcher, so you can assign DataSource in a delegate instead of use the method append on a collection of table.

  public partial class MainWindow : Window {
        private readonly ChartCollection chart = new ChartCollection( );

  public MainWindow( ) {
            InitializeComponent( );

  this.graph.DataSource = chart;

  var worker = new Worker( this.Dispatcher, chart.Append );
            Task.Factory.StartNew( worker.DoWork );
        }

  private class Worker {
            private readonly Dispatcher dispatcher;
            private readonly Action append;

  public Worker( Dispatcher dispatcher, Action append ) {
                this.dispatcher = dispatcher;
                this.append = append;
            }

  public void DoWork( ) {
                for( int i = 0; i <= 360;="" ++i="" )="">
                    double value = Math.Sin( i * Math.PI / 180 );
                    this.dispatcher.BeginInvoke( this.append, i, value );
                    Thread.Sleep( 100 );
                }
            }
        }
    }

• Graph XY plotting the question with the data of repeting inside the loop

  Hello

  I have this problem I'm having with my plots. Maybe there is a better way to do it.

  I have a set of data that I use inside a loop. I want the loop to keep reusing the same data. The reason I do that is because I want to continuously stream that loop exactly like that of my data file and plot it and do something different with it. My problem is that the XY graph does not draw correctly. I wonder if someone can help me to get field work and alo get data through the graph XY waveform.

  The files are attached. Test.VI is the main vi

  Note attachments removed by the request of the user of the admin-

  
  

• "Floating" text / graph framework question

  Working on a Church Directory design and I have a question. I have over a hundred images on a large number of pages. Is there a way to design where each pane of content (using blocks of text currently) is floating? So say someone with the last name of Anderson is added later, I don't have to move all the entries of a table or move more than 100 text frames? In my head, I should be able to have a lot of "floating" images, and if I add a new image between two of them, everything will move accordingly.

  Not a crazy idea, but I don't know where to start with it.

  Thanks in advance for anyone who has any ideas!

  With the help of my CS4 Master Collection on a Windows machine i7, but that shouldn't matter for this.

  Discover objects anchored in the help files. You will want to consolidate your cpations and fremes for each person, and then add the group as an inline object embedded in a text frame where him consists of the history essentially these entrenched groups, with little space added between the two. They will sink as text when you add or remove one.

• E5-571 graph Acer question?

  Hi all hope someone can help?

  Recently bought an Acer laptop E5 - 571 i5 which has integrated graphics Intel - 4000 HD.

  I installed Call of Duty United Offensive but I get a black screen when I try to run it, followed by a message saying

  "buffer overrun detected".

  Its an old game and works well on another laptop, a Lenovo Z570 running Windows 7 with an Intel integrated chip (3000).  I would have taken the Acer would also have no problems being more spec, but it seems that this is not the case.

  Googling the problem and I see that graphics drivers have been a problem with ATI cards, but there is no indication the integrated Intel has a problem.  Indeed, a more recent version of cod (Modern Warfare 2) seems to be on the list of Intel of games that work without problems with this particular configuration.

  Someone at - it a suggestions of what I could do to break this problem?  I have the latest drivers Acer and tried to run the game in different compatibility modes (Windows 7, XP, etc.) with the same result.  Am reluctant to the idea of trying to mess around too much with it as I have until Christmas to retrun the agreement of 30 days replacement.

  TIA

  Reg

  OK finally got sorted, seems to be a driver problem

  Had to use DIsplay Driver Uninstaller 13.5.3.0 download from Sofpedia.  Ran this and opted for claire on all display drivers and install a driver Intel stock.

  After a reboot, the graphics were then in Device Manager as a graphics card from Microsoft to address stock - I was then able to update the drivers by downloading and installing a driver more FORMER windows 7 since «VGA_Intel_10.18.1.3383_W7x64_A» Acer support site

  Had a little play manually install drivers... had to use the Zip file and force him to accept it, but seems this solves the problem of Buffer Underrun on the old Call of Duty games.

  Phil - Thanks for taking time to look over this and offer some suggestions

• Question of graph or chart radar

  Hello

  I am trying to create a simple (?) type of circular graphic radar based on a previous work of art (see attached image).

  I started to create from scratch in Indesign, but struggled to create sections of different colors. Someone suggested Illustrator but I always encounter similar problems. So far, I created three layers of shapes circle as well as three stretches of white mask to hide each section. I think I'm doing this is harder than it needs to be!

  Any help appreciated more!

  Amanda

  

  In fact, your subject line is your answer.

  Just use a pie chart. In the table, enter the valeur.33 for 3 entries. Ungroup twice, fill it with the color.

• Question form

  Hello

  I'm using numbers on a Mac and have a question form.

  Basically, I trade the Forex market. A particular strategy, due to the volatility on the graph 4 hr and the range of prices around my entry level, I have 3 entry levels and 3 separate stops.

  In the column A is the pair, for example, it could be GBP/JPY or USD/JPY. Each pair has its own characteristics, volatility and spread, so the size of the stop and the position of the trades are different to each other.

  Before entering the trade I have enter the price of the trade in the B column, and then enter the size of the judgment in column H and after I pressed enter, all of the columns between the two levels of trade of 2nd/3rd and the position of 3 stop price are calculated. These price levels, that I use to Cross Ref orders waiting or create limit orders.

  The formula is the same throughout the rank, I know how to set that upward, that I don't know or even know if it's possible, set the numbers so that it identifies the currency pair are get calculated and so use the appropriate values already predetermined that is unique for each pair? Otherwise if I can't do it, I'll just have some separate tables for each currency pair.

  I hope that this is explained well, his bit of a hardening. Thanks for the help in advance.

  Graeme

  Hi Graeme,

  Are the values of each pair, or are they specific to each of the currencies and calculated from the values to apply to the pair?

  If they are predetermined for each pair, has a lookup table containing a possible list of currency pairs in the column, then each of the values predetermined in the following columns can be used here.

  The values could then be extracted using VLOOKUP, or a combination of MATCH and INDEX.

  If they are predetermined for each currency, replace "currency" for possible "par" and "currency" for 'currency pairs' in paragraph 2 above.

  A table of model listing currencies and the sample values would help in the composition of a formula to adapt to the situation. You can get general information about the functions listed above in the browser functions. Select a cell any on a table, type = to open the browser functions, then enter the function name in the search box to bring up a description (with examples) for each function.

  Kind regards

  Barry