Y at - it a command to force a MacBook Pro to search for connected devices?
My MacBook Pro (retina, mid-2012 running 10.11.6) struggled to connect to my Drobo Mini - from the first day of the purchase of the Drobo Mini in February. Sometimes it connects, sometimes not. I worked with the support of Drobo, who went so far as to send me a replacement, but still no luck. I learned that I can usually get a successful connection carefully timing my login at a specific time in the 'dancing lights' Drobo starting routine. A little late or a bit early at the moment and there is no editing of the car. In this case, I have no choice but to stop the computer and the Drobo and try again - sometimes repeat this procedure 2 or 3. Frustrating and not good for the material, I'm sure.
Here's my question (for all the times I miss the right timing), is there a command I can give the MacBook to 'force' to 'search' connected devices? If so, I hope that they can connect. It's frustrating when the devices are connected physically but doesn't seems to "reach out" to the other.
At startup, the reader sends a signal to the adage of "I'm here, let's connect." computer Or, the computer continually detects when a device connects. Whatever it is, a device or another is dropping the ball.
Thank you for your help and advice.
Bill
Disk Utility.app > file select your drive > Mount
Tags: Mac OS & System Software
Similar Questions
-
What is the command to force a mac to reboot using mac os original version?
What is the General Mac OS command to force a Mac to use restart (on the internet) is the original version of Mac OS (it has been bundled with)? I am told that it is by a non-Apple technician.
For a Mac that shipped with 10.7 or newer, Option, command, and R.
For a Mac comes with an earlier version of Mac OS X, it is not a. These Macs require a DVD (or thumbdrive for MacBook Air) to reload the original OS.
(137928)
-
MacBook Pro will not stop manually, must force closure every time
My Macbook Pro (bought in 2013) does not stop. It remains just to the screen with all the folders and the bar of the upper screen went. Bottom Dock remains. It shows that the Finder is still open but I can't leave the program, even when I try to force to leave. I had to force close to the bottom of my computer for a while now, because of this problem and I think that its starting to take its toll on the performance of the computers when it is started.
What is Wacom software installed on your Mac? If so, upgrade to the latest version. If it does not help uninstalling the Wacom software, including possible elements of Wacom/Bamboo in System Preferences > users and groups > Login.
http://www.Wacom.com/en-us/support/FAQs/drivers-software/how-do-i-uninstall-a-Dr iver-on-mac-os-x
You can also reset the printing system can help:
https://support.Apple.com/kb/PH18614?viewlocale=en_US & local = nl_nl
-
Once a day linking Bing itself forces on FireFox. He interrupts the connection.
Once a day linking Bing itself forces on FireFox. He interrupts the connection.
This is the link that is displayed: go.microsoft.com/fwlink/?LinkID=219472 & clcid = 0x409
I get this message: the connection was reset
The connection to the server was reset while the page is loading.
The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Try again
I don't use any of Bing. Only StartPage Qwant and DuckDuckGo.
PS I also asked this question on the MS 8.1 Bing forum. As he might also be a Windows problem.
Thank you very much.
Ok. The only thing I forgot to do, is use Qwant to for a search on the link I provided. And now the answer has been:
So I solved it myself. Laughing out loud.
-
Firefox is forcing me to use Yahoo search, even when I have it set to use Google for years. I read the other response to this problem, which solved the problem of the user by uninstalling "search me 2.3", but which does not appear in my modules, so I can't delete it. " How can I fix this please?
I suspect that you need to learn about the functioning of the new search bar in Firefox 34. See if anything here helps you - https://support.mozilla.org/en-US/kb/search-bar-add-change-manage-search-engines-firefox
-
Scrolling speed is fine, but when you press the command key and then it becomes very slow.
He does it with a mouse, but not with the trackpad.
It does when the modules are disabled.
No problem on Safari or Chrome.
No problem on PC.I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.
Any help would be much appreciated.
Thanks in advance!
You use the mouse wheel to scroll?
There are some prefs mousewheel, which control the behavior when you press the modifier keys.
You can set the key to the action of each to 0 for normal scroll.See http://kb.mozillazine.org/About:config_entries #Mousewheel.
-
can I change my old trackpad and replace Force touch trackpad on my macbook pro... it's going to work?
N ° any other hardware and firmware.
-
I can't find a command "go to" pages as exist in Word. (for example, on page 163). I find it necessary to move easily large documents.
I should have added that I use a new MacBook
-
When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command
Yes it will be displayed.
-
command to search for windows is genuine or not? challenge
command to search for windows is genuine or not?
can someone answer this question?
Hello Rajesh R988
I'm not sure of any utility that will check if Windows is authentic command line, but you can check manually http://windows.microsoft.com/en-us/windows/genuine -
I need the sidewinder force feedback wheel 64-bit driver for Vista THAT have.
I need the sidewinder force feedback wheel 64-bit driver for Vista THAT have.
Thank you
Try Google.
-
"Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?
Hi Jack,
This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.
André
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/ -
Is it enough for connection through SSH-2 RSA only, 1024, force 8 password?
Hello world
I provide the highest level of security on C2821-CCME-VSEC/K9. Is it sufficient for connection through SSH-2 RSA only, 1024, force password: 8 symbols, no. CAPS letters, numbers, special symbols, example of password [homeless ^ & * 89]?
line vty 0 4
exec-timeout 60 0
entry ssh transport
line vty 5 15
entry ssh transport
I should create MAC based Access-List on cisco router?
Should I use connection with higher security level options: SSH-2 RSA only, 2048, force password: XX symbols, CAPS and small letters, numbers, special symbols, example of password [homeless ^ & * 89Ad @[email protected]/ * / & #]?
It's paranoia that has nothing to do with real life, or is a recommended practice?
Please, advice. Thank you very much.
for extra protection
I do it
access-list 23 allow any newspaper
line vty 0 4
access-class 23 in
line vty 5 15
access-class 23 in
Journal connection failure
Connection on the success journal
This will be syslog all connection attempts
Archives
The config log
Enable logging
hidekeys
This will be syslog all comands
SSH itself can be easily decoded when the man in the middle attack
-
Hi friends,
I use a custom application Apex 5.0 authentication.
After connection, if the user password has expired so I am able to move the user to the page of free password change.
However, I wanted to logoff this user by force and so that the user can connect with the new password. I tried with owa_util.redirect_ur but no luck.
Can someone tell me please how to do this?
Thanks in advance.
Thierry
Hi Thierry,.
Thierry says:
I use a custom application Apex 5.0 authentication.
After connection, if the user password has expired so I am able to move the user to the page of free password change.
However, I wanted to logoff this user by force and so that the user can connect with the new password. I tried with owa_util.redirect_ur but no luck.
Instead of OWA_UTIL. REDIRECT_URL, use the following API: APEX_AUTHENTICATION. LOGOUT
Create a process after the process of change of your auto password:
BEGIN APEX_AUTHENTICATION.LOGOUT ( P_SESSION_ID => :APP_SESSION, P_APP_ID => :APP_ID, P_WS_APP_ID => NULL ); END;
I hope this helps!
Kind regards
Kiran
-
How to force the format landscape for mobile devices (phone &; pad)?
Hello, I am designing a new Web page in muse. It will be necessary for this layout, view the page in landscape format (mobile / ipad & iphone). is there an opinion to force the format landscape for mobile devices? whereas even if the device is in portrait format, the site will be displayed in landscape format? support told me that I will have to add the code. could you tell me the code and how do I insert this to my page? Thanks for your help
This might help you:
Maybe you are looking for
-
How you people would get 10.2.3?
People- The forum more and more, I see 10.2.3 is available. However, when I use the App Store App and try to look for updates, I get the response "no updates available". Y at - there a trick to this? Thank you!
-
Portege R700 - high pitched noise
I have a high pitched noise of my Portege R700 - 11 p. The noise is in the upper range of the sound signal (perhaps around 15'000 Hz) and is regularly increasing and decreasing at a rate of about 0.5 Hz. He is always there that if the laptop is plugg
-
How to disable others in my family with find my iPhone
I am in a family of iCloud as an adult. My younger brother scored as a child custody does find it my alerts iPhone for me and it's really annoying. I can't have anything the Organizer. Is there a way to prevent other people in my family to use find m
-
What rate of update do I need?
Hello I want to generate 10 Hz analog signal. What the recommended update rate and number of samples for such a signal?
-
Hello I have a version of German language Labview 8.5.1 can I instal it in English how? Thank you.