Y at - it a up-to-date BIOS newer M3450 Aspire 2012?

Similar Questions

• Can someone tell me the exact procedure updated the BIOS on an Aspire V5 - 122P.

  Can someone tell me the exact procedure updated the BIOS on an Aspire V5 - 122P. I upgraded from Windows 8.1 for Windows 10. I read somewhere that the upgrade of BIOS ver 2.10 and 2.12 will improve the speed at which it runs. It seems that here are slow running problems with this machine.

  I also know enough to know that an executed incorrecly BIOS update can cause a wipe on then, please, if you have done this correctly, please share your experience.

  I downloaded the file and the readme says: Windows flash: Please click on "SOBI0210.exe" for updating the bios.

  I didn't get this in case it defines something moving that I don't understand.

  [subject line changed to reflect the new topic]

  Hello

  There is nothing special for the update of the BIOS.

  Just download the BIOS, make sure that your laptop is plugged in (and also that he above 60% battery in any case), and run the file that you downloaded.

  BIOS

  Acer

  BIOS

  2.12

  3.2 MB

  24/07/2014

  Download

• Looking for an update of the bios for Acer aspire M1641 motherboard

  Looking for an update of the bios for Acer aspire M1641 motherboard

  All I could find was the one for the acer aspire M1640 which has a different card number, but is as close as I can get for it. That's the good? If this isn't the case, anyone would be able to point me in the right direction?

  Thank you.

  FTP://FTP.Acer-euro.com/desktop/aspire_m1641/BIOS/

• What is the release date for Streets and Trips 2012/2013?

  What is the release date for Streets and Trips 2012/2013?

  Information about future product releases are usually announced through press conferences and other media.
  You can continue to monitor the Streets and Trips here site: http://www.microsoft.com/streets/en-us/default.aspx

• Run Wdws7 pro on two new Dell XPS. I back up all my data on my ACER Aspire server.

  I back up all my data on my ACER Aspire server. The new Dells with Wdws 7 pro will not find the server. He will find the server to backup everything, but when it came time to recover the material it will not find the server. I also have a backup server with 11 Wdws, there will be the Acer server, so there must be something with the Dell printer, or a combination of software and laptop computer.
  I have this problem since the purchase of new laptops. My old XPS, never had any problem using Wdws XP. This problem is unique, for either, no one wants to venture a solution, or Dell or Microsoft have a small problem, nobody has met him.

  Hello

  Thanks for posting in the Microsoft Community.

  However, the question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• 5 Lightroom stuck in 'data searchable new preparation.

  Freshly installed Lightroom 5 stuck in 'Data searchable new preparation' for hours.

  

  Of course, I have tens of thousands of photos, but why it takes so long and shows no progress?

  He tried to cancel and start again with nothing doesn't.

  Sleep full night later, 17 hours, no still no progress at all, yet virtually no CPU, no disk access load and no GPU load either. Lightroom has none of my files no longer open images. Always at around 30%, where "prepares the new searchable data" begins. Only 75000 total images. This system is pretty much the fastest money material can buy at the moment, is not anyone.

  So I canceled again, leave the source catalog to another drive (M4 SSD) real pictures (RAID1 RE4) and restarted the process limited to only 2 (of 12) carrots (Win + R-> taskmgr-> do right click-> Set Affinity lightroom.exe; that when getting the update / catalog selection prompt, not during the current status of upgrade). The upgrade took less than 10 minutes.

  But yes, of course, it is infinitely more likely that the problem was a software engineer does not know how to read the performance indicators and does not use top ...

• Question of date BIOS 6, 70 - WIN update

  [BIOS update | http://www.toshiba.de/innovation/download_driver_details.jsp?ID=87552&OSID=-1&SOURCE=TEMPRO&driverLanguage=42&VERSION=V3.3&LNG = 2 & service = a & .broadvision = Yes & OSBU ILD=7601&OSBITSIZE=64&BV_SessionID=@@@0218172226 .new decided com.] 1387813245@@@&BV_EngineID=ccchadflkkkgjehcefecfem dhjgdfgh.0 & NO_CACHE = TRUE] for Satellite L850, Satellite C850 C855 Satellite, Satellite Pro L850, Satellite Pro C850
  Is supposed to be 29/11/13, but when you unzip the file, this is the version of 17/07/13

  > Is supposed to be 29/11/13, but when you unzip the file, this is the version of 17/07/13
  It is the date of the BIOS file download, simply put the date when the BIOS has been published on the page of the Toshiba UE driver

• BIOS Update Fail - Aspire XC - 603G Win 8.1

  Hello

  I have searched here for a few days and read a bunch of messages - which some I tried.

  I don't mean to come down in Win 7 (even though I really like Win 7)

  I'm trying to stick with Win 8.1.

  I was running BIOS P11 - A1 and suddenly started having trouble with the USB 3.0 controller.

  I read some posts here and on other forums that I should see if there is a BIOS update.

  There are in fact four for this machine and so I started with the oldest a P11 - B0L

  T

  To be honest, the instructions in the file Readme PDF weren't that useful

  but I found some great data on the site of the FRIEND who helped me to put up-to-date to B0L - P11.

  I ran the BIOS BACK. BAT file first, but got this error: "4 - error: file ROM ROMID is not compatible with existing BIOS ROMID.

  So I advanced and run AFUDOS file without any parameters in the command and all set file to update correctly.

  But I still have problems with the USB 3.0 controller and the process just seemed to be relatively complex.

  As well my HP and three other Dell had programs BIOS Flash, or simple instructions which worked without any problems.

  I was just lucky with them and there are some hidden secret ritual UEFI and/or MS-DOS that I'm missing here?

  Am I possibly using the incorrect day BIOS file - and if yes which one should I use?

  Thank you

  -Bil

  If your computer came pre-installed with windows 8.1, BIOS correct would be P11. B2 (to the best of my knowledge).

  'L' versions are for Linux.

  http://Acer.custhelp.com/app/answers/detail/A_ID/35410#_ga=1.124769097.237648148.1435182563

• PowerEdge 2950 new motherboard, BIOS new - uuid message

  Hi all

  Impossible to find any info on the Forum, so here's my Q

  We have a poweredge server 2950 our test running environment. Basically, it works fat ESX 4.1.0 260247 drive. All virtual machines are stored locally on disk running raid5, so No shared storage.

  We had a problem with this box and dell came to replace the motherboard. We took the opportunity to upgrade the bios to 2.7.0

  When turn the machines virtual, I get the message msg.uuid.altered. None of those VMS have a any application or anything which is glued MAC. I compared a file one of the VMS VMX and uuid.location, uuid.bios, ethernet0.generateAddress fields to change (I chose the option "I copied it")

  Is it save to just select "I copied it" or is there anything else I should be worried.

  Comments are appreciated

  Generally, an update of the BIOS does not change the UUID.

  But, for example, I remember some cases with a PERC firmware update where to change the UUID and the entire data store must be re-imported.

  André

• Whenever I call a VI I get old data with new data in the table

  I selected 'clear indicators when it is called' in my properties VI, execution. Yet, whenever I call the VI, the table of data is growing. My main VI implements my USE, and then call the sub - VI, which sets up an instrument measurements, then reads the results and transmits data. I then change the UUT to the next State and repeat the same task sub - VI to get again the same measures. The main VI changes the mode of WEAR it three times, so call the sub - VI three times. The last call of the Subvi back all three sets of data together, which is OK. My problem is, when the main VI ends and I run another USE, I get the new set of data as well as the complete list of data from the previous run. I found a similar problem answered here on the forum who suggested I should 'clear indicators when it is called', and so I did. It still has not fixed my problem. Any idea?

  Try this, for example:

  

• I can't MJD (date and time) in LabVIEW 2012 SP1?

  I need some time my data of stamps before sending it to the file.  I did this with the standard calendar date and time but MJD is that we prefer to use.  How can I get a timestamp MJD in LabVIEW 2012 SP1?

  Check the JD MJD conversion formula
  http://www.IERS.org/nn_10828/IERS/en/service/glossary/MJD.html

  The modified Julian day (MJD) is defined as MJD = JD - 2400000.5, where JD is the Julian Day

• It is an error in the data sheet? Acer Aspire 11 switch (SW5-171-39 LB vs SW5-171-80 KM)

  According to technical data sheets, I found the following information:

  Acer Aspire switch 11 - SW5-171-39 LB

  CPU = Intel Core i3-4012Y
  Storage = 128 GB SSD
  Height x width x depth = 1 x 11.7 x 8.1
  Weight = 3.42 lbs

  Acer Aspire switch 11 - SW5-171-80 KM

  CPU = Intel Core i5-4202Y
  Storage = 128 GB SSD + 500 GB
  Height x width x depth = 0.4 x 11.7 x 7.6
  Weight = 1.87 lb

  Is this right? The model with additional HARD drive storage has a lighter weight and more small dimmentions? Or is it a mistake?

  Hello

  Specification of the switch 11 (SW5-171-xxxx):

  -11.73 x 7,57 x 0.42 inch pad only.

  -11.73 x 8.09 x 0.98 inch pad and dock

  -11.73 x 8.09 x 0.98 inch pad and dock with HARD drive

  -1.87 kg with battery 3 cells, pad only

  -3.42 kg with battery 3 cells, pad and dock

  -3.64 kg with battery 3 cells, pad and dock with HARD drive

• Updating BIOS for Acer Aspire 3000 / battery problems

  So I had a couple of Acer Aspire 3000 who were not working and got one to work...

  But it seems that I am having some problems when the battery is in it - and otherwise fine without him.
  Excessively long Shut Downs that go to the continuous reboots / Touchpad problems, gel, etc.

  Says the battery until it goes to @ 7-8%.  Then the battery does not charge.

  When the power adapter is disconnected - the battery is charge?

  Given that these laptops have been sitting around for a couple / few years... and have been given to me... I do not deny the possibility that the battery is not good. And there was only 1 battery using 2 laptops.

  After that she has charged at 7-8% - I unplugged it the adapter - and it ran for @ 20 min.  and said: '1 HR 30 min remaining"until she was cut.

  I also tried tried the - remove battery unplug adapter and hold the power button for 2 min method - then installed battery and adapter - but nothing helped...

  (On a side - note, which is probably not related - my wifi doesn't seem to be working - even though it appears, it does nothing wrong in. Device Manager - and runs a diagnosis does not help...) I know there are wireless networks but none does not appear! Broadcom 802. 11 g)

  In any case - I saw a post on a different site-say an UPDATE of the BIOS could possibly solve the problem of battery - (wifi may be too)...

  Given that I've NEVER DONE an UPDATE to BIOS; I'll ask NICELY, please walk me but this... with as little as ACKRONYNS and GEEK TALK as Possible (respectfully).  I had heard of this sort of thing - to download the update of the Bios... and I think it can be put on a Falsh player - but is a ZIP and should she be EXTACTED - which I'm not too big? Then "Select (something)? and then maybe restart... So now, I'm willing to give it a try - with some help and input.  THANKING YOU IN ADVANCE!  a link for the download and the proper BIOS UPDATE would be a big departure... - I guesss that goes without saying.

  So, here are some features of the information system: (I hope there enough, but please let me know if you need more)

  

  3 to 32 of the latest BIOS availabel

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_3A32.zip?acerid=633643243476341057&STEP1=note...

  for flash, unzip the file and then read the statement in the WinPhlash SOP XP 2005.pdf file update.

• Update BIOS to M3450 with secure boot

  I have an Acer Aspire M3450 with an FX processor. I just read windows 10 will need a UEFI bios that supports support secure startup. There is an update on the Acer PO1.4A site. This update contains the UEFI update? The system I have now has UEFI but is 1.3 I believe and the new UEFI is 2.4. I ran the upgrade for windows 8.1 Advisor and he told me the same thing on my version of bios and no secure boot.

  I forgot to mention that my current bios is PO1. A2

• How to reset a bios password on Aspire 5570Z? I deleted mine while trying to change

  I am giving my Aspire 5570Z to my neighbor and I wanted to remove the bios password.  I went into the bios and delete the password and pressed on enter new password and confirm.  Now I'm locked up.  Help, please!

  I want to thank the entire community for the help! I was able to reset the password is by disconnecting the CMOS battery for an hour then without replacing the HD or the battery and reconnect the AC adapter. Then I booted the machine past POST. I unplugged the AC and reassembled the machine. He now starts without the password of the bios. I hope it helps someone who has the same problem. Thanks again to all!