Y at - it no limitation for the number of end users

Similar Questions

• JUnit Test Suite Limitations on the number of test classes can be included in the suite

  I run JUnit tests on my ADF Model picardalice in an application. I'm getting an instance of a request through the class of the device module and it helps in my test classes. It was created using all the Test Suite of Business components in JDeveloper 12.1.3.

  I'm running a JUnit test suite and it has several test classes in its operation. It runs successfully some and others fail. If I run those who fail by themselves, they are successful. If I remove the test classes in the suite they work (even those who have failed when the test classes were listed as a result of tests).

  Here is my code for the test method.

  @Test

  public void testAccess() {}

  See ViewObject = fixture1.getApplicationModule () .findViewObject ("ProjEstimateDtlVO");

  assertNotNull (view);

  }

  the ViewObject perspective comes return null for the execution of the test suite during all test classes are ran. It's successful return if I run one test case. It's successful return if I remove test classes in the following before running the suite.

  There are 70 + test classes in the suite. Is there a limitation on the number of test classes that must be executed in a test suite? Is it because it is repeatedly using an instance of the application module? Is this other thing?

  Everyone ran through this?

  Thank you.

  The problem in my case was because in one of the test cases I was releasing the module of the application in the method of disassembly. Since the application module was created once again, when I ran after tests and he ran this test scenario, anything after this would fail due to no application being created module.

  Thanks, Timo

• Limitation on the number of components adf on a jsp page?

  I am currently working on a page that includes a number of components of af: table with the underlying components of af: column for each table. The page also contains other components of the adf. My question is as stated above, is there a limitation on the number of adf components that are allowed on a page and if so what is it?
  
  I found that I had page errors can be solved by reducing the number of components. For example, deleting components of af: objectspacer I'm able to include components of af: column that caused the page to fail.
  
  Any information would be appreciated.
  
  Thank you.

  What version are you on?

  We faced a similar problem in 10g. The project does not compile after that jspx exceeds a certain size.

  It is due to the restriction of code_length java class file, it cannot be greater than 64 k.

  Check this thread for detailed explanation and workaround {: identifier of the thread = 361086}

  We have been working around the issue by breaking large page in multi-page and that refer to using the home page:

  
  
  

  Mitesh.

• Procedure for the number of working days per month when the user enters to and from everyday

  Hi all

  Can provide you a solution to this - procedure for the number of working days per month when the user enters and days.

  Suppose that the user enters November 18, 2014 start date and date as November 23, 2014.

  The output should display

  Count: 4

  November 18, 2014 Mar

  Sea 19 November 2014

  November 20, 2014 game

  Fri November 21, 2014

  It will exclude Saturday and Sunday.

  Hello

  Here is an example of removing dates Saturday and Sunday:

  with days as(
       select (trunc(sysdate, 'YEAR') + level) as col from dual
       connect by level < 365
  )
  select * from days
  where trim(to_char(col, 'DAY', 'NLS_DATE_LANGUAGE=ENGLISH')) not in ('SATURDAY', 'SUNDAY')
        and col between to_date('18.11.2014', 'DD.MM.YYYY') and to_date('30.11.2014', 'DD.MM.YYYY')
  order by col;
  

  Cheerz,

  Stako

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• Find the number of authorized users

  Is there a place in the e-Business Suite that stores the number of users that you have a license for? I am looking for our paperwork and it does not appear to be in the stack of things, I was given the previous person. Short call oracle I was kind of hoping there was where it was stored. Thank you

  Hello

  The number of authorized users is not stored in the database/application. Contact your Oracle sales representative to determine how users (or perhaps processors) you are authorized to use, this should be mentioned in the support contract.

  Kind regards
  Hussein

• Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  I use the version of Vista Home Premium.

  While I don't really like how the UAC area enters the information that tells it when to display the box tell me about your work of things on the UAC (I know an article exist on the web), is not how to answer this question.

  There is no log of UAC elevation file.

• Will be Muse act as an IDE for the development of end-to-end?

  Hello

  Could you get it someone please let me know if MUSE behaves as an IDE for the development of end-to-end?

  Thank you

  VJ

  Hi VJ.

  It really depends on your needs. If you're simply a designer it will probably very well work for you. If you have to do something custom or access code, then no, it won't go "end to end".

• Better make a link to the latest DirectX end user runtime web install?

  What is the best way to link (from our application) to the latest DirectX end user runtime web install?

  http://go.Microsoft.com/fwlink/?prd=11234&pver=latest%20DX%20Web&plcid=0x409&clcid=0x409
  or
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3

  The FamilyId remains the same when a newer version of the runtime is out?
  Thank you for any suspicion!

  Hello

  The question you have posted is related to the coating and would be better suited to the MSDN Community. Please visit the link below to find a community that will provide the best support.

  http://social.msdn.Microsoft.com/forums/en-us/category/EmbeddedWindows

  Amrita M

  Microsoft Answers Support Engineer

• If I download files using Adobe Acrobat Pro DC, what are the limits on the number of downloads? I publish a set of PDF files every 3 months to about 1600 people. Is that allowed with this product, or should I register for something else?

  I need an affordable way to deliver a 20-20 MB of files PDF zip file every three months to about 1600 people. What program to do this? Load on the storage of Adobe site and then use an e-mail program to send the link to the recipients?

  Hello

  There is no limit to the number of downloads of a file shared on Adobe Document cloud. Please don't forget to create an anonymous link using 'Send & Track' app, and which can be shared with the participants as much as you want.

  Thank you!

• Limitation with the number of entries in a Tunnel of Split ACL

  Hey Cisco community!

  I am facing a problem with a Cisco hub and spoke to the solution.

  We have 2 Hubs (Cisco 7200-2 for redudancy). All clients have a RADIUS (Cisco 881). The rays are 24/24 reported the 2 hubs (2 dmvpn tunnel) to give us access to our monitoring and support equipment.

  Each talk have a NAT table with a specific NAT range for each talk. That way, we can reach every devices with a single IP address within the VPN.

  For example:

  -Spoke_001 have a range of IP NAT 10.80.0.0 255.255.254.0

  -Spoke_002 have a range of IP NAT 10.80.2.0 255.255.254.0

  ...

  To connect to hubs with our mobile phones, we use the Cisco VPN client. We have different profiles created in the regional centres:

  -Profile Admin with an ACL that allow connectivity with each talk

  -Integrator profiles: which allow connectivity to an integrator to some defined rays.

  So the integrating profile looks like this in the hub

  Configuration group customer crypto isakmp [NAME]

  Touch [password]

  [domain]

  pool [NAME]

  ACL [NAME_VPN_Split]

  !

  Profile of crypto isakmp [NAME]

  Profile of clients VPN Description Group [NAME]

  identity group match [NAME]

  list of authentication of client VPN_Client_AUTHEN

  VPN_Client_AUTHOR of ISAKMP authorization list.

  client configuration address respond

  IP local pool [NAME]...

  And the relationship of this group access list:

  [NAME_VPN_Split] extended IP access list

  IP 10.82.20.0 allow 0.0.1.255 all

  IP 10.82.24.0 allow 0.0.1.255 all

  IP 10.81.238.0 allow 0.0.1.255 all

  IP 10.82.4.0 allow 0.0.1.255 all

  IP 10.82.44.0 allow 0.0.1.255 all

  IP 10.81.242.0 allow 0.0.1.255 all

  ...

  In the access list, we can modify the subnets to reduce the number of entries, but some groups should have access to a spoke with the NAT IP range that we can summarize in 1 line (see example)

  The question we have is: when we have more than 50 entries in the ACL, 51st entry does not work:

  -Customer VPN does not receive the road to this network, the road is not added on the connected PC

  -Even if the road is added manually on the PC, the 51st network ACL is not accessible.

  Do you know why there is a limit of 50 entries in a tunnel "Split ACL?

  Do you know if there is a solution to avoid this problem?

  The problem is that if we can summarize an ACL in less than 50 lines, we will have to create a second profile and know wich one to use for the network that... Not really a good solution.

  Thanks in advance!

  Version:

  ROM: System Bootstrap, T3 Version 12.3 (4r), RELEASE SOFTWARE (fc1)

  BOOTLDR: 7200 (C7200-KBOOT-M), Version 12.3 software (15), VERSION of the SOFTWARE (fc3)

  System image file is "disk2:c7200 - advsecurityk9 - mz.151 - 4.M2.bin.

  Yes, there is a strict limit of 50 split tunnel ACL entries when you set it by using the old-fashioned way of VPN configuration (ie: card crypto).

  If you use dynamic TIV to configure, then you have no limitation for ACL split tunnel.

  Here is an example configuration for dynamic configuration of VTI:

  http://www.Cisco.com/en/us/docs/iOS-XML/iOS/sec_conn_vpnips/configuration/15-Mt/sec-IPSec-virt-tunnl.html#GUID-E9EB4518-6269-42E8-908C-57BA5D6334A5

  Hope that answers your question.

• How Oracle 'row_limiting_clause' for the number of lines. percent for HUNDRED lines works in Oracle 12 c?

  Platform: Windows 7 x 64 database: Oracle Database Enterprise Edition Release 12.1.0.2.0 12 c - 64 bit.

  How row_limiting_clause Oracle to rowcount. percent for HUNDRED lines works in Oracle 12 c?

  Row_limiting_clause Oracle is acting funny. In the code below, the 'fetch_test' table has 10 rows

  Case 1 When using row_limiting_clause with first extract 0.5 lines only I get, no line selected

  Case 2 When use the row_limiting_clause with the first rows only 5 percent clause I get,1 row as output.

  This means case 1! = 2 cases [0.5! = 0.5 (5 percent of 10 lines)]

  SQL > select * from fetch_test;

  COL1 COL2

  ---- ----

  1A

  2B

  3 C

  4 D

  5 E

  6 F

  8: 00

  5%

  : j

  10 J

  10 selected lines.

  case 1:

  SQL > select col1 from fetch_test

  2 first extract 0.5 lines only;

  no selected line

  case 2:

  SQL > select col1 from fetch_test

  2 extract the first rows of 5 percent;

  COL1

  ----

  1

  1 selected line

  What Oracle Documentation has to say,

  https://docs.Oracle.com/database/121/SQLRF/statements_10002.htm

  If the number of lines has a fraction, then the fractional part is truncated. If the number of rows is NULL, 0 rows are then returned.

  This explains the case 1, but I can't find any possible explanation in case 2 in my example above. and there is no mention on percentage clause in the Oracle Documentation.

  Already asked on stack - overflow.but I got the answer regarding "assumes percent Gets the cycle of 5% to 10%.

  No idea why Oracle doing what they do on the documentation!  I hope that now you have the answer: a rest (when you use percent in the line limiter) will ALWAYS return a number integer, rounded upward.

• Largest number of digits for the NUMBER data type?

  What length more of a NUMBER that Oracle will "support"?

  The documentation says the following:

  Limitations of the data type says:

  «Can be represented in a comprehensive precision 38 digits»

  NUMBER of Data Types says:

  "Oracle guarantees portability of numbers with precision of up to 20 digits of base-100, which equals 39 or 40 decimal digits according to the position of the decimal point."

  I realize account that if I define a column as simply NUMBER, I can insert numbers with a size up to 126 characters.  However, Oracle seems to maintain only the first 40 digits in MOST cases.  The largest number of digits, it seems to allow is 40 before it begins to be replaced by 0.

  With numbers that have more than 40 figures, Oracle will sometimes replace all numbers according to the 38th numbers with a 0 and sometimes replace 0 after the digit 39th or 40th.

  Therefore, what is the largest number of digits, can be trusted to safely store Oracle?

  This is the code I used for this testing process.

  create the table max_num (num number);

  declare

  number of l_x;

  Start

  for x in 1.200

  loop

  l_x: = x;

  insert into max_num values (rpad (1, x, 1));

  end loop;

  exception

  while others then

  dbms_output.put_line ('STOP: ' | l_x);

  dbms_output.put_line (SQLERRM);

  end;

  /

  Select num, length (replace (num, 0)) of max_num;

  What length more of a NUMBER that Oracle will "support"?

  You have already given your own answer. If 'length': the maximum number of digits is written the doc gives you the answer:

  999... (38 9's) x 10 value maximum¹²⁵

  The 38/39/40, hereinafter referred to as the doc means "significant digits". This is why rounding or truncation occurs if you provide more significant digits of 38/39/40.

  Oracle stores the numbers internally in a binary format 21 bytes using a documented structure in the doc of the OIC in the section 'NUMBER'.

  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e10646/oci03typ.htm#i423684

  Oracle database stores the values of the NUMBER data type in a variable length format. The first byte is the exponent and is followed by 1 to 20 mantissa bytes. The high bit of the exponent byte is the sign bit; It is defined for positive numbers, and it is cleared for negative numbers. The lower 7 bits represent the exponent, which is a number of base-100 with an offset of 65.

  This article from doc continues to show you how to convert the internal format to the real value.

  An additional byte of 1 is used for all types of data to store the length; That's why you often see docs saying numbers can take 22 bytes.

• No limitation on the number of subfolders under shared folders?

  Hi all
  
  We receive requests for groups of users who want to group records and wanted to check to see if anyone has come across limits number subfolders under shared folders?
  
  Thank you.

  His is more on the limitation of the operating system.
  Visit this link
  http://docs.Oracle.com/CD/E21764_01/bi.1111/e10541/prescatadmin.htm#BAJBJIGA

  If brand pls help

• Features of limitations for the folios on the part of the Adobe viewer

  Hello

  The limitation on the use the same Adobe ID with the viewer Adobe for 25 devices start now? with V25. I didn t find these information in this link - What's new in this version

  Concerning

  __Felipe

  There is no limitation as such, but multiple connections do inetefere with your account performance. If you have a large number of pages in your account, it is advisable to avoid too many connections has a single application. So I would keep the low number of connections unless you have an ID specifically for sharing folios for several people to control.