Y50-70: can not enter the BIOS over and cannot find a second hdmi monitor that I have already

Similar Questions

• Satellite L310 - I can not enter the Bios settings

  Dear team,

  I have a toshiba that is always on warraty.
  Is there anyway you can help me.

  It ceased to operate effectively. It does not exceed the Bios.
  By that I mean you reach the Bios screen, but you can not enter the Bios settings.

  Details
  model: toshiba Satellite L310

  What exactly do you say: you reach the Bios screen, but you can not enter the Bios settings?
  The BIOS is secured by password or what?
  You see a splash screen of Toshiba for short time?
  Is it possible to start the Windows operating system or to recover the laptop?

  Please publish more details!

• Can not enter the BIOS settings

  Hello. I can't enter the Bios on z580 with 8.1 windows settings. I tried everything, including now shift with bios stop and accsesing under windows, nothing seems to work and windows strarts just straight up normally. Also, I can't update to solve this problem. I hope someone can help.

  Thanks for confirming.

  In your post original, you said 'change of outfit with the judgment', so I wanted to be sure that you try SHIFT-restart.

  Have you tried to stop completely and pressing the button "novo" (a recovery key). On my Win8.1 Yoga 2 Pro, that brings up a menu containing several elements, which is the BIOS Setup.

  Kind regards.

• Satellite C660 - 2-3: can not enter the BIOS

  Hello

  I activated the quick start function that ignores the Logos and boots only from the HARD drive, but now I need to install a 32-bit Windows for the school, but I can not enter or reset the Bios.

  I tried every combination of buttons, I can think.
  Is there a way to delete this feature again without disassembling?
  Existing windows are not the original, so no toshiba software is installed.

  Thanks for help.

  Hello

  Have you tried pressing the F2 key while turning on the laptop?
  Press F2 repeatedly in line if this will not help press first "INS" and then F2 to enter the BIOS

  Good luck

• Photos imported, but do not arise in the new folder.  Cannot re-import, as LR said that they have already been imported.

  LR6, Win10.  The photos that have been imported do not show upward in the destination folder.  Folder had been created within LR.  Deleted the folder in LR and re-created. Tried to import again, but can not, as LR said that they have already been imported.  Now the pictures do not exist on my PC, by searching via the Win10 File Explorer.  How to re-import these photos?  I still have them on the external hard drive, I tried to import original.

  Most likely, you accidentally imported the photo to a different folder than the one you wanted.

  Because you see the photo in "Previous import", I think you'd have to reconnect the external hard drive, then move (drag / move, entirely in Lightroom) or photos to the desired folder.

• (Redirected) Alienware x 51 will not be closed. Fans and lights still on. Can not enter the BIOS at startup.

  Hello

  My Alienware x 51 will not be closed properly. Fan and lights constantly. I need to hold the powerbutton to shut it down.

  Its an Alienware X-51-purchased around June 2012.
  GeForce GTX 555
  Intel Core i7-3770 CPU @ 3, 40GHz
  8.00 GB OF RAM
  Windows 7 Home Premium

  The problem started when I upgraded my BIOS version A06 to A13 (running A14 now). Now, whenever I turned off my computer, the lights are still up and the fan runs. In order to stop completely, I have to press the "switch" button.

  My warranty expired a year ago.

  Anyone know how to fix this? I suspect there is something wrong with my motherboard, since I can't even get into the BIOS setup when I start my computer.

  Has anyone tried to replace the motherboard? What type of motherboard do need me? Is it possible to buy the "original" Alienware mobo?

  I hope someone is able to help. Comments or suggestions are welcome.

  Anders

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Can not enter the parameters of the BIOS on my Qosmio F30-112

  Dear lovers of Qosmio,

  Since I have updated Bios version 3.60 - winning, I'm not able to access my BIOS. I turn on my laptop while pressing ESC I get SYSTEM CHECK. Press [F1] to enter the bios. I press F1 , nothing happens, I pressed it several times the same thing. It's not like my Qsomio f30 - 112 made problems or anything else I want to be able to access my bios, who knows.

  Can you please help. by the way I tried 100 times > _

  Dear Hamid is very strange and at the same time stupid situation. I don't really know what the problem is here. Computers laptop Toshiba usually have 2 different BIOS versions. One is defined as Toshiba BIOS and secondly is Phoenix BIOS. Your Qosmio definitely has this version of the Toshiba BIOS and you can enter the BIOS settings using the keys F1 ESC.

  If possible try to call the service authorized in your country. If you can not enter the BIOS settings you need of some explanation expertise. If you will get some info useful please share it with us.

• Can not enter the parameters of the BIOS on Qosmio F60 - 147

  * Hello *.
  * Please could you help.*

  Toshiba Qosmio F60-147 have a brand of laptop. Yesterday, I wanted to put a password on the BIOS and the field "Set supervisor password" save the password I wrote and I recorded went with the F10.
  But then I want to enter is F2 during startup to restart when I press. I can't enter a kind of is. But I still can't connect is Bios Update. We don't have a problem with the windows open on my computer that I use without problem. Is why not glue only one question. ?

  * I turned on the computer, I press F2 until the Qosmio logo, but I can't enter the bios and resumes.*

  When you start your laptop can see you in the lower corner of the message display press F2 to enter the BIOS...?
  What happen exactly when you press the power button / stop?

• I used "msconfig, in an attempt to speed up my laptop. I did something wrong and I can not enter the first 13 items, only the trial version. I'm on vacation and he would like you could give me a temporary serial number fo three weeks please. Phil M

  I used "msconfig, in an attempt to speed up my laptop. I did something wrong and I can not enter the first 13 items, only the trial version. I'm on vacation and he would like you could give me a temporary serial number three weeks please. Phil McMillan

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Can not enter the alphabetical letters in redemption code... only numbers. Œuvres for thin keyboard everywhere else on my iMac.

  Can not enter the alphabetical letters in redemption code... only numbers. Œuvres for keyboard very well everywhere else on my iMac.Any suggestions?

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

• I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent and do every time.

  I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

  It is not usually necessary to create an exception for the certificates.
  
  Possible causes are that a server does not send the full (intermediate) certificate chain or self signed certificates.

• Can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.

  I want to use a USB device to connect to the Internet, as my ethernet card is US I can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.  How to do this please?

  USB to the Internet connection.

  Hello

  It seems that your dongle is not installed properly. try to uninstall and reinstall the software dongle...

• I have restored the files to the Recycle Bin and cannot find where they have gone

  I have restored the files to the Recycle Bin and cannot find where they went. MS Help is no help. The files from the location of AutoSave in Word if it makes a difference.

  Check the Word Options > save > the AutoRecover file location

  This will show you where the files have been restored to Microsoft Security MVP, 2004-2010

• I can't enter the bios using the external monitor

  Hello, I use Dell Inspiron n4010 for the last 2.5 years. My laptop monitor stopped working that's why I bought an external Dell monitor... Its works fine but I need to install the windows now... Unfortunately, I cannot get into the BIOS of the external display and can not change the device to initialize DVD ROM.

  Please can someone tell how to enter the BIOS using the external monitor (I put it as a main monitor, but it still does not work)? The Monte screen after windows starts... Is it possible to get it back? Help, please...

  Yes - I know - it's what I'm trying to show you how!

  If you follow my instructions in my last post, you will see nothing for the "six seconds".but the startup process stops at the BIOS screen and FN & F1 or F1 key will rise from the dead internal to external monitor.

• In integration (the command-line developer), I can not enter the options for the command of the jsb

  > jsb http://url
  works

  > jsb http://url 4
  gives a 'available Options, too many arguments' ToolTip window

  There is a blue [options] after the http://url, probably an indication I would add my options here.
  But I can't get the syntax right, or it's bugged.

  How can I enter the options presented by 'help jsb' on integration?

  You can see the options, if you type ' - '. You will need to manually enter the options in the current versions of Firefox.