Y5070 CPU throttle problem

Similar Questions

• Satellite pro M10: CPU cooler problems

  Hello
  I am using a Satellite pro M10 1.5 G.
  The cooler cpu or fan, makes a strange noise. It seems that some module between the wheels of a bike. It's very annoying. The pc is not so quiet as it was before.

  What can I do?

  Hello

  It sounds like there is something caught in the cooling that is contagious fans the fan blades. Visually check the fans through the aspiration air grills to see if you can see what it is.

  Unfortunately access to all fans will involve some disassembly so I would try to suck debris on the grids of aspiration of fan with a vacuum cleaner.

  If the problem persists, it may be necessary to take the unit to a Service Agent authorized to check/replace cooling fans.

  HTH

• Portege M400 - CPU cooling problem

  Last year, when I had used my Portege M400 for 2 years, he started the deadlock occasionally. Sometimes [I couldn't even start it | http://www.youtube.com/watch?v=RjNa8-c2Aro]. With cut and try the method I found the problem. The Spring wire which clasps the CPU radiator, it was with not enough force:
  http://Zorko.ru/assets/files/531/531/170720102581.jpg
  http://Zorko.ru/assets/files/534/534/170720102589.jpg

  The problem was solvable by Berry to the claws spring begins to apply more force hugging the radiator of CPU:
  http://Zorko.ru/assets/files/535/535/170720102591.jpg

  Apply a new layer of thermal grease has been useful as well:
  http://Zorko.ru/assets/files/533/533/170720102585.jpg

  However, the solution works for only a few weeks. And then (especially if it's hot outside) the story begins again.

  Any suggestions how to solve the problem once and for all? Thank you.

  Hi Greendrake,

  It s really great that you are interested in your Portege M400 and you can remove it. It of really not easy and so this cannot be the people with a lot of experience.

  Anyway, as you know here our forum user s only. This means that you can speak with normal people like you and me. I would recommend therefore to contact a service provider authorized in your country. Maybe the guys know this problem or something else or you need a thermal grease special because not all compatible thermal greases all cooling.

  By the way: on the Toshiba site you can find a list of all service providers.

  I hope it helps. :)

• Satellite L755-128 - CPU compatibility problem

  Hello dear colleagues,

  As the title says, I have a Toshiba Satellite L755-128 code PSK30E. He has a 2nd generation processor Intel i5 - 2410M.

  Laptop that works fine and everything, but I recently got a nice agreement on a more recent laptop with lower overall record, but a better processor. It's an and Latitude E5530, with a 3rd gen Intel i5 - 3230M.

  Go to the Intel website, I saw that basically two processors have the same TDP of 35W and the same size of package, both run on HT and have two hearts, the only difference is that architecture from 32nm to 22 nm and the frequency is higher.

  In addition, 2nd generation supports 1066/1333 MHz memory, and 3rd generation supports 1333/1600 MHz. My memory is 1333.

  Of course, as you may have guessed, I intend to swap the processors between the two laptops. Updated the BIOS on both of them, then replace the processors, re-assembled and starts, surprise: The recognized enjoy the old version of i5, ran fine and all, but Toshiba does not.

  He just opened when I pressed the button, but the screen remains black. Then I pressed the button again, it also normally stop. (I repeat, already updated BIOS update, as someone recommended). I disassembled again the Satellite, check if everything is in place, and second starting time still the same.

  Then, I am annoyed and exchanged in return on their original laptop processors. And both of them work fine.

  So if someone has encountered this problem could you please indicate if you managed to sort it out?
  What seems to be the problem, not the Satellite Map mother does'n not support 3rd generation Intel?

  If so, why? Or if that would work, what should I do?

  Thank you in advance!

  Hello

  I put t know any laptop manufacturer that officially would fund an upgrade of the CPU.
  For the most current updates on laptops are your own decision and no one could provide you with a confirmation that your laptop with new processor work or run correctly.

  Indeed many people try to update processors, and in many cases, it also works on Toshiba laptops.

  But there are a few important notes:

  (1) you must ensure that the chipset of the motherboard would support new CPU. In case it doesn't, you can not use

  (2) even if the new processor would be supported by the chipset, it is still pending regarding BIOS support. BIOS is changed for each series laptop and it is possible that some processors would not fully compatible or supported by the BIOS.

  As you can see, the upgrade of the CPU is not very easy and it s no matter that a laptop computer that was equipped with the same processor the L755 takes in charge the other CPU there are many more factors that could affect these updates.

• P7-1233w: CPU temperature problems

  I made some updates for my PC recently, mainly a new power supply and a new GPU. Now my time CPU become too high. TBH, I'm not really sure what they were before.

  in any case, Im using Speccy to monitor all of my time. My motherboard is usually around 30 * C, GPU usually around 34 *, and the HARD drive is usually the same. For all those who are good. But I have CPU will slow anywhere since the middle of the fifties up to 70 high years. And after playing something demanding as The Witcher III or GTA V, temperatures are much higher. Ive seen as high as 93 * C and its not uncommon for the temp to be 90 + when I close the game.

  Even with these high times, I really seen performance problems, even when The Witcher III running with everthing on Ultra. Bad still get a solid 40 fps on that. So my first question is how do I know that the readings are accurate.

  Ive tried a few things to get off the time. I had some Artic Silver 5 and Redid the thermal paste. Not much of a change at all. I also noticed that the heatsink fan blowing on the CPU instead of drawing air away from him. According to my research, some people like it grows and some pulling. If I swapped out the fan pulls air from the radiator now. Only I did there, so I don't know how it will affect about 30 minutes in the long run, but so far, temperatures are much the same. Maybe a little lower.

  Regarding the breakdown in this case, I went from the case of the factory to a full waist after I did the GPU upgrade. I also added a few fans. The new case has a 80mm fan on the Panel I have drawing air into the case, a 120mm fan on the back that is drawing air out of the case, two 80 mm fans on the PSU, one inside hand and one on the outside and they are both pulling air out of the case. Then I have a fan on the bottom that I'm drawing air into the case. The GPU has also two fans on it, and they are directly on the fan on the bottom down.

  So, my first thought is a liquid cooling. I was thinking about something like that.

  http://www.Newegg.com/product/product.aspx?item=9SIA6J32TS8512

  Apart from this and something like a new, better radiator, Im really at a loss. So any advice?

  No one? IM thinking that my CPU temp who maybe Im seeing double the actual temp. Which could explain why he can turn and fall very quickly sometimes.

  Also, I opened the case and used my infrared thermometer on the radiator. 35 * C. His sentence warm to the touch. IM Yes CERTAINLY get bad readings. Anyway I can fix this? Or at least know what is the cause?

• CPU heating problem

  My computer is Compaq Presario SR5413WM desktop PC.

  I recently updated my CPU of the AMD Athlon 64 LE-1640 Lima 2.7 GHz Socket AM2 45W for the AMD Athlon 64 X 2 Brisbane 4800 + 2.5 GHz Socket AM2 65W Dual-Core and me had a problem. Quickly, the Dual core overheating when put under heavy load. Put back the old processor and noticed temperature seems to hover around 70 c under low load and can get up to 89C when on a high load. I have a Thermaltake heatsink thermal / fan and a fan of case 8mm set in place to exhaust at the rear of the case. Using AS5 for my thermal paste. Any suggestions?

  Hello

  It's a small fan that probably doesn't transfer very large quantity of air through the fins of the heatsink. I'm waiting for the result you see.

  I wouldn't use a standard air fan less than 90mm. I recommend that you go into a store and ask for assistance in the search for a cooling solution that adapts if the OEM of your desktop computer.

  Puts goede groet,

  ERICO,

• Q180 high CPU usage problem

  My new Q180 shows CPU usage by at least 40% all the time in the Windows 7 Task Manager. Sysinternals Process Explorer show that this is due to more than 25% of material interruptions happening all the time.

  Everyone sees these problems / symptoms?

  
  

• HP Photosmart Plus 209 has: com.hp.devicemodel.transportproxy uses 100 percent of the CPU, persistent problem

  Hello

  This process HP com.hp.devicemodel.transportproxy seems to have a life that he has - he's eating 100% CPU, even when finished printing and the printer is not connected.

  The old NET on this http://h30434.www3.hp.com/t5/Inkjet-Printing/com-hp-devicemodel-transportproxy-uses-100-percent-of-t...   suggested delete and update the drivers of HP who I did it - but it did not help and the problem is still there up until I go to System Preferences > printers and to remove the printer (I can't just delet the process in activity monitor, while it keeps!).   Not really elegant.  And if you forget to do it continues to run, 100% of the CPU and becomes very hot, even when the lid is closed.  Not nice.

  No fix for this, HP?

  Ian

  Hi @ian123running,

• [Aspire P3 - 171] Windows 10 CPU core problems

  I have recently upgraded to Windows 10 on my P3-171. I have installed all the drivers and Windows updates from the support (including the recent BIOS) page, but everything was always very slow.

  After watching the performance information in the Task Manager I have seen that the CPU is strangled permanently at 800 MHz. the power of the restorations of switching device the CPU real clock frequency, but it restart the system resets to 800 MHz.

  In addition, Windows 10 can use a carrot. All cores/threads appear in the Task Manager, but that only one thread is used, the other three sons stay inactive even in conditions of heavy use.

  I looked at my process affinity and each of them are automatically set to only CPU 0. Try to change the affinity is ignored (it simply comes down to only CPU 0 immediately thereafter).

  Anyone know how to solve these problems? Otherwise I guess I'll have to choice but to downgrade to Windows 8...

  Hello

  If you have the time and space on the HARD drive, you could try to install another windows 10 OS from a USB and check if you have this question in a new facility that has not been upgraded. It may be that the settings were screwed upward when you went from w8 to w10. I do not recommend to do a refresh of the settings Windows 10 PC because you will lose the possibility of returning to the w8.

  However, you will need a partition to do this. I really think that the issue is in the process of upgrading and a fresh windows would work OK, but I can't guarantee it.

• T510 CPU Perfonmance problem

  Hello, my Thinkpad T510 has i5 2.4 ghz. But it is still running at 1.2 ghz. (I try the method of intervention and others.) How can I reach real speed 2.4 or 2.4 + turbo thrust 2.9.And my experince point CPU Windows is 3.8.is this normal? Thanks for the responses...

  ilovethinkpad wrote:

  I do not work with battery.i open antivirus scan, two cpu test program and a movie hd as my cpu increase 1.2 to 1.5.After, I close the hd movie, new 1.2 ghz processor.

  Where the problem you have, ThinkPad Butterfly down without the battery installed. If you put your battery, and do the same test then the problem of the limitation of the CPU should disappear.

  Also, what adapter are you using? 65 or 90 watt?

• command prompt and high cpu utilization problems

  I have an Acer Aspire laptop. Windows 7-64 bit. My CPU usage has been quite erratic for months. She sometimes becomes up to 4 or 5%, but most of the time, he is running between 50 and 100% (I have a counter on my desk). I've been running all kinds of tools and cleaning methods. I had McAfee antivirus for a prior year of minimal, but renewed problems a few months ago and found strange and annoying that he wouldn't be updated every day while I was working. I assumed something was wrong with her, so I replaced it with a program that I got for free with another purchase from Best Buy... Trend Micro, I think it was called. Well, it appeared that Trend Micro used more process and CPU than McAfee. At that time, I thought it would be safer and cleaner for Microsoft Security Essentials TM trade. I also have CCleaner installed and I run it every other day or two. I also run r-kill and tdsskiller a few times but never found something dangerous. I removed everything that I felt uncomfortable unused programs were safe to remove. The last thing that I see and which seems odd to me is that, at startup, a "command prompt" icon will appear briefly in my taskbar and then quickly go to 'start' 'recent '... I have never seen this before so it seems weird, like a clue any. Also in the last few days, usually online, but also with Solitair Windows offline. Either the cursor will freeze or the screen freezes making useless cursor, even for a moment, and sometimes I'll just "end task." I'm not a gamer, I mainly watch movies and videos... Try, anyway! Thanks in advance for the help!

  Wow you're gluten for punishment than TrendMicro Mcafee Ouch

  You did use less uninstallation of Mcafee?

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  You can get trendmicro from Mcafee here too

  http://www.SevenForums.com/system-security/151276-instructions-tools-remove-residual-anti-virus-programs.html

  Personally, I use Panda free and Premium of Malwarebytes.

• (Redirected) Aurora R4 CPU Fan problem (command center)?

  My R4 for over a year (so the warranty is released). Just before warranty missed, fans began to everything going haywire. I contacted support and they have updated my BIOS and uninstalled/re-installed my remote control center. Which fixed most of the fans. Then I updated to windows 10, and everything was still fine. A month later, I had a system crash (wouldn't start upward) and took the PC to a local technician who found little bad ram was the only problem. Unfortunately, he drove my drivers back to before the bios and the command center have been updated (I don't know why). So, fans again started going crazy. I've updated the BIOS myself and that fixed some of the fans, however, the CPU fan is always crazy. If I run a program more complex than playing a video file, the CPU/system fan goes up to maximum speed (> 5000 RPM). In the control of the temperature, all times are stable around 27 to 28, so I don't know why the fan is too reactive. Also, I don't know why it lists the 0 system fan and the cpu fan at high speed, I've mentioned. Looking inside the machine, I can see that each fan is on, so no fan should be set to 0.

  I've heard talk of uninstall command center and reinstalling it would help, but I was not able to repeat myself that I can't find the dell control center download more. In the page drivers Aurora R4, it isn't appearing any more for download and I don't want to delete it until I have a way to download again. My command center is listed as 3.6.5.0. I have no way of knowing if this is the last version, I can't find any control center files or current information on alienware.com or dell.com anywhere. I doubt replacing the command center will solve the problem, but it is frustrating that I can't even try. Heck, even the link to the support site for "Alienware drivers and applications" leads to a dead link now (a page that won't load). If this expensive platform becomes a brick after all just a year, I don't see myself ever buy (or sell) products dell again.

  My system is an Aurora R4 with Intel (r) Core i7 - 4820 K Pro. Running on windows 10.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• I7 2630QM CPU speed problem

  Hello

  I use i7 2630QM with HP DV6 6020st.
  My problem is my CPU is at 2000 mhz but i7 2630QM Turbo Boost technology stays: 2.9 Ghz
  and said that the event viewer
  The speed of the CPU 0 in group 0 is restricted by the system firmware. The processor is in this state of reduced performance for 71 seconds since the last report.

  Kernel-processor-power of the source; Event ID 37
  Any ideas?
  Thank you...

  Yep, the BIOS update.  Just follow the direction of HP and just in case where to save your data.

• number of cpu P2V problems

  I have converted a server terminal server esxi and assigned the macine 4cpu. However when I go in the Manager of tasks he sees only one processor and in Device Manager it only sees one and the cpu is pegged at 100% load but in vsphere, it shows that it is only using 25% of the available cpu power. does anyone have any suggestions on how to get my server (windows server 2003 Enterprise Edition) to see and use all 4 cores. This problem is killing us.

  I don't want to hijack this thread, but have you thought about a repair on the OS to see if that helps?

• Network - high CPU load problem

  Hello

  I've updated the 2.6.24 kernel 2.6.26 (under Debian Lenny 64 bit) on the host computer. And I have a problem with the network communication.

  I have 2 Virtual PC (Windows) on the host Linux (Debian 64 bit). Each virtual PC to fill only one network adapter.

  I have VMware Server 2 for 64-bit, my PC has Intel Quad Core and ethernet card 4 on the card mother Gigabyte EP45-DQ6.

  When virtual PC start communicate via network - load cpu in virtual card pc go to 40-50 percent, after the stop communicates on the NIC - cpu load to go from 1 to 4%.

  CPU host increase load when virtual pc communicate too.

  My linux use r8169 for ehernet adapter.

  What is the problem?

  Thank you for your response.

  Soory for my English.

  Reduce the numer vCPU one per guest. If you have a multiprocessor/kernel HAL, you will need to change this, but give it a try without changing that, first of all.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =