Y510P 59405664: Dockingstatin available, even with three monitors?

Hello

I am about to replace my desktop and laptop system with the IdeaPad Y510P 59405664 as the two-in-one-solution. So: is there a docking station for this idea which is able to manage the following specifications?

  • mechanical keyboard via PS/2 (not an absolute must, but would be great)
  • mouse via USB
  • audio via RCA
  • three monitors
  • Gigabit ethernet

I hope that it is possible, even with three monitors. In my current setup of PC desktop, I use three monitors, too. The reason I think that it should be possible is that this IdeaPad has the internal CPU graphics (NVS), who can manage a monitor, and the second dedicated graphics card GT750 that should be able to handle additional monitors. All monitors are monitors FHD (1920 x 1080).

If there is No docking station available that can handle three monitors, is it possible to work with DisplayPort or something like that? I have not worked with DisplayPort, so I don't know what is possible.

I appreciate every response that is useful to me :-)

There is no docking station on the y510p

Tags: Lenovo Notebooks

Similar Questions

  • Option not available even with current subscription covert

    I have a subscription being exported Adobe but I can't convert files in Adobe reader - the option ' convert to ' is grayed out? All ideas

    Hello

    Try to Sign Out in the player, and then connect again and check if it works.

    Click the arrow next to your name in the upper right corner, and then click Sign Out.

    Let us know if you face any problem.

  • After a clean install of Windows 8, I can't get three monitors to work

    I did a clean install of Windows 8 pro.  I have a Dell T1500 with over-pants V4800 graphics.  This machine previously had Windows 7 installed and works with the ATI driver.  With Windows 7, the three monitors worked without problem.  Now, with Windows 8 installed I can't get two monitors to work.  I use the more updated driver for Windows 8 for the map on the website of AMD.  The third monitor can be seen on the page of the screen resolution, but I cannot "extend desktop...". "the third arch.  When I try to do so it gives me a message saying

    "The display settings could not be saved.  Please try another combination of display settings. »

    All three monitors are the same, Dell P2210.  I tried different resolutions. I tried the driver I was using on Windows 7, I uninstalled the driver and adapter repeatedly.  I installed all the drivers from AMD with the extras (hydravision, etc.).  I used just the default Windows drivers. I have change the placement of the monitors on the video card, but few matter where I plug them in, only two works.  All monitors are operational.  I even tried different monitors.  All this with no result.  I tried to use the Catalyst Control Center.  He sees the third monitor but just shows it as being disabled with no way to enable that I see from in the Catalyst Control Center.

    It is the last obstacle for me to fully use this machine to Windows 8.  I'm puzzled.  I have read many other forums.  I've heard of this problem with Windows 7 as well so I don't know that it's specific to 8 but could very well be.  Yet once I had Windows 7 with three monitors with the same card.  Contribution to this issue would be greatly appreciated.

    I had this problem on a Lenovo three installation of the monitor using the integrated display laptop, a monitor outside the mini HDMI and a third follow out of the HDMI Port among Replicator.

    In the end, it's a simple solution.  When you go to display settings, all three monitors not reimbursed up to 1920 x 1080 and configuration could never be saved - however the 3rd monitor only supported by 1680 x 1050, which is the resolution (recommended).  After changing the 3rd monitor for the resolution recommended, I was able to save the configuration to display > screen without problem resolution.

    I don't know why the resolution not supported has been set default to-after selecting the right pair, there is now no option to go to the highest resolution not supported on this screen.

  • Three monitors in Speedgrade?

    I work with three monitors in first, Media Composer, Final Cut Pro, even PhotoShop (sort of). No there is no way to use my third monitor in Speedgrade? Currently, I can use my HDMI TV to view the enlarged image, and one of my computer monitors for the interface, but with all the windows of beautiful, invaluable in Speedgrade, it would really help if I could spread out them between both of my computer monitors. Is there really no way to do this?

    Martin

    OS X.9.5

    2015.0.1 release

    N ° more pity, unfortunately. SpeedGrade only supports 2 monitors... one for user interface, one for the program monitor. And you're not the first to hit this... Let's say a decent number of professional colorists run three monitors... large monitor broadcast-tv for the customer looks at a main interface and monitor of the program "small". I've heard say that linking the right external boxes BlackMagic or whoever can't mount this... but it's two points of view the monitor program and only with a graphical interface.

    Please feel encouraged to make a feature request on this... these things are what is read by the types of bean-counter who allocate resources for engineering teams. They "see" never forums user here.

    https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

    Neil

  • What reason is there to find my friends send me the mesasge 'Location not available', even though the iPhone, I'll try to find is always on and always is sharing its location with me?

    What reason is there to find my friends send me the mesasge 'Location not available', even though the iPhone, I'll try to find is always on and always is sharing its location with me?

    Hello

    If there are several device linked to the account, it's probably just that it took to give the positions of the other device or the iPhone is not connected by wifi or cellular connection.

  • Three monitors with a single video card?

    Hey guys,.

    I have a user with a T430 possessing a video card Intel HD connected to a Mini Series 3 with 2 DVI connectors.

    She claims that it connected to his laptop to another docking with the same configuretion and she was able to work with 2 monitors connected to the docking station and its display LCD on the laptop, I tried the same thing with its current docking station and it will not recognize 2, the LCD on the laptop and 1 on the monitor connected to the docking station.

    I've never seen this work with just a video card, I saw him when he has a second video card in there, but once again, she claims, he worked on an another docking station (exactly the same thing from a work colleague) it is plugged.

    Any ideas?

    Thank you

    The T430 is able to support three LCD, if you use the 3 series with more mini docking station with 2 monitors connected via DVI or Displayport. The third monitor can be internal or external connected via the mini laptop own DP.

  • Three monitors with FSX Gold and Windows 7?

    How can I configure three monitors with Microsoft Flight Simulator Gold?

    Hello

    You can see the Sub articles that might help you.
    How to configure multiple monitors for Flight Simulator X and other Microsoft Games for Windows games
    http://support.Microsoft.com/kb/240981
    Flight Simulator x: the use of multiple monitors
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=62E19B18-A649-4AC0-aad3-B90622B1E858&%3Bdisplaylang=en

    I also suggest to contact the Flight Simulator X support team for assistance on this.
    http://support.Microsoft.com/GP/cp_flightsim_master#TAB4

  • Firefox always starts with three tabs - my homepage, a site of months of slate and the Huffington Post. Even uninstalling and reintalling the does not solve problem.

    Whenever Firefox is started, it opens with three tabs - my homepage, an age of months on the site of slate and the huffington post home page. EVERY TIME. I tried to uninstall and reinstall Firefox and the problem persists.

    This has happened

    Each time Firefox opened

    == May 15, 2010

    Hello Kenneth.

    See this article to see if you have these three tabs defined as your home pages: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  • XPS 12 + two S2340T for three monitors have contact problems

    I am testing a configuration of business as part of our R & D in the field.  I'm running a Dell XPS 12 8.1 Windows.  Last week, I ordered two external monitors S2340T for use with my setup.  In the past, I was able to successfully run the two external monitors for a three monitor Setup.  When I plugged in the first S2340T, everything worked fine. When I connect the other, I lost the ability to screen on the first.  On the second, when I touched the screen, he was interacting as if I touch the screen of the PC clean, despite the fact that he was it running correctly as extended desktop. I finally found that each monitor must be running with the USB cable (I found this in a forum of the year, even if the instructions I received still makes no mention of the need.) At the moment I touch on the screen of Mobile PC, as well as the first S2340T (monitor 1) that I am connected.  The other I'm connected (screen 2) takes any action contact and is the space in the mobile PC display.  If I disconnect 1 monitor, monitor 2 will work perfectly, as expected.  If I plug then 1 monitor, it won't work properly, allowing a contact immediately to show as a touch control on the laptop PC screen (thus imitating the question I had when monitors were reversed). I completely replaced the Dell drivers, even those it says is up-to-date.  I've disabled and upgraded.  At this point, I don't know what to try next.  Dell has recently told me to update my Bluetooth driver for a separate issue and immediately after, I lost the Bluetooth connectivity option and my Bluetooth mouse functionality. After you run an update of the driver from Dell, I lost my Bluetooth receiver on the laptop.  Fortunately, I've seen it before and all I have to do is to re - install the VPN we use SonicWall Global VPN client software.  Restart the system and my Bluetooth is back; but now neither monitor reacts to the touch on the scree, each monitor shows the point of contact as being on my Dell XPS 12.

    Try this...

    * Unplug the two computer screens
    * Reconnect the two monitors by USB 3.0 only (do not use DP or HDMI)
    * Use Windows to configure the monitors in extended mode and save this configuration
    * Go to the control panel
    * Contact search
    * Tablet select configuration - installation
    * You will see a screen that says "Touch this screen to identify it as the touch screen if it is not the press serigraphy tablet PC enter to move to the next screen.
    * At this point, press enter
    * This message will move to one of the external screens
    * Press the screen near the message until the message "press on enter to move to the next step in your configuration to compete."
    * Press enter
    * At this point, if only using a screen external, you will be on the tablet settings screen and you can close it. If you use several external displays, the original message will be then posted on other external display
    * You will see a display on the other monitor that says "Touch this screen to identify it as the touch screen if it is not the press serigraphy tablet PC enter to move to the next screen.
    * At this point, press enter
    * This message will move to one of the external screens
    * Press the screen near the message until the message "press on enter to move to the next step in your configuration to compete."
    * Close this window
    * Now every touch screen will work independently without affecting the other or the laptop screen

  • Firefox crashes in typing or by clicking check box or the radio button, even with all the plugins / extensions removed. Check with many types of malware scanners.

    Firefox crashes in typing or by clicking check box or the radio button, even with all the plugins / extensions disabled, then deleted. Sometimes it hangs for five minutes. I checked the PC with several types of scanners of evil-ware, but none to be found. All hidden and deleted cookies, all DELETED & extension plugins. Remove all instances of Firefox PC and registry, then restored to bookmarks. The only thing that I did not is to remove and reinstall not my favorites.
    Windows Vista (yes I know) and FF 13.0.1

    Try disabling hardware acceleration in Firefox.

  • My laptop volume is very low, even with the maximum setting. It also has a very annoying echo

    I tried every setting available on this laptop, go all together if not try several changes in all settings. The volume is still low and has a very annoying reverberation and echo effect, even with these settings turned off. I got it for a week, and I was very happy with any other accept the audio. The reasons for buying this model were media processing and so far I have and become more disgusted daily with her. It is a Pavilion dv6 and it has beat audio software. If anyone has a solution, it would be much appreciated.

    Hello

    One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers and headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

    Kind regards

    DP - K

  • Three monitors

    I have a desktop pavilion p6320y with Windows 7 64 bit. The graphics card is integrated (nvidia geforce 9100) and I was wondering what I need to run three monitors. I know that I need a new video card, probably both. Is it possible to run two cards in this computer? Is there a better way to do it?

    Hi tim,.

    This XFX AMD 6850is on sale for $120 after rebate. It supportsAMD Eyefintyand 3 + monitors.

    The Corsair CX600is on sale for $49 after rebate.

    ' HP ' how-to ' articles should be useful.

    When you use AMD EyeFinity, a monitor must be native display connected port or you need to use an asset for AMD EyeFinity validated dongleon a monitor.

  • HP Pavilion a6600f desktop PC communicates only with the monitor

    Our bureau a6600f HP Pavilion PC (with OS 64 - bit Windows Vista) has stopped communicating with his monitor.

    The start process seems to work for 7-8 seconds before stopping.  We can hear the fans and CD unit turn during this period.  There is no warning beeps.

    We went from monitors to exclude a monitor problem. Both have two monitors, that we have given to the case put off until the boot process - which may indicate no comments received.

    We tried to reset the BIOS blindly in accordance with the instructions provided for elsewhere in this forum.  We also tried to boot from a CD without success.  Please notify.

    Once the boot sequence was not even initializing, I realized, I discovered the solution.  A simple search online for 'black screen' and 'no boot' leads to results multiple problems related to the integrated NVIDIA gpu chip.

    The chip is apparently subject to overheating to the point where its connective solder may melt and break its link with the motherboard.  This issue mainly comes in laptops because of the sealed enclosure, but it has been reported also occur in models of office such as ours.

    This broken link results in a black screen and an inability to boot into the BIOS.  Several of these instances have been diagnosed wrongly that the motherboards 'failed '.  Fortunately, there's a fix called "reinvest."   It comes down to warm up the chip gpu to the point where his welding redéroule reconnect the loose pins.

    Some repair shops are fully aware of this problem and offer to repair it for about $80 at present.  Some DIY Laptop owners have also posted videos online in order to document how they have reorganized their own chips using a variety of means.

    I decided to take the road of this last, warm our chip NVIDIA gpu with a heat gun using a heat shield to protect surrounding components of the motherboard.  My attempt to reflow works perfectly, so I handed in thermal sinks the gpu with some thermal paste expenses place to finish the job.

    To summarize the question, our desktop HP Pavilion a6600f PC lost communication with his chip gpu NVIDIA Geforce 7100 integrated due to the chip overheat and melt its connective solder.  This broken link compromised the ability of the motherboard to initialize its startup sequence, which gives no output to the screen, resulting in a screen empty.  A new graphics card does not resolve the issue, given that the motherboard was inoperative because of the connective issue with the gpu chip built-in.  Reinvest the gpu chip has solved the problem.

    PROBLEM SOLVED!

  • Cannot create a smart group with three conditions

    When I create or edit a smart group, I can specify one or two conditions. But if I try to add a third condition, no third line is displayed, even if the OK button goes grey as if a third line were appeared containing a partially specified condition.

    Does anyone of you can create a smart group with three or more diseases? I can't.

    You need to scroll to the bottom of the list of criteria to see one after another. The window is not resized.

  • My music player has more than one entry for a song and when I buy a song or download to the reader I'm going to finish with three entrances.

    Original title: getting copied songs and resumes somehow

    Because of the settings or something my music player has more than one entry for a song... so when I buy a song or download from my phone to the player so I'll finish with three entries... on an album of 10 songs I get 30.  3 of each song... even with pictures... is it a setting or is there a way to automatically set the drive remove the redundant songs and photos?

    Hello

    1 Windows operating system you are using?

    2 are you facing issue with Windows media player?

    If you are facing the issue with Windows Media Player, you can try the following steps and check if it helps:

    Method 1:

    You can delete the Windows Media Player database and check if the problem persists.

    Step 1:

    a. exit Windows Media Player.

    b. click Start, click Run, type %userprofile%\Local Settings\Application Data\Microsoft\Media Player in start searchand then click OK.

    c. Select all files in the folder, and then click delete on the file menu.

    Note: you don't have to remove the folders that are in this folder.

    d. restart Windows Media Player.

    Note: Windows Media Player automatically rebuilds the database.

    If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

    Step 2:

    a. exit Windows Media Player.

    b. click Start, click Run, type %LOCALAPPDATA%\Microsoftand then click OK.

    c. Select the folder Media Playerand then click delete on the file menu.

    d. restart Windows Media Player.

    Note: Windows Media Player automatically rebuilds the database.

    For more information, see the article:

    Method 2:

    If you are using Windows 7, you can also try to launch Windows Media Player convenience stores on the library and check if it helps.
    Convenience store open in Windows Media Player library

    Method 3: How to prevent duplicateor entered invalid frombeing added to mylibrary during playback of music files?

    When you move digital media files on your computer, the file name and file path information remain unchanged in your library. Then when you select a file to play to its new location, a new entry is created in your library if you select the option automatically added to your library when played. As a result, your library can quickly contain a large number of entries, duplicate or invalid.

    To prevent it be automatically added to your library of music files
    a. in Windows Media Player, on the Tools menu, click on Options.
    b. on the Player tab, clear music to add to the library when played check box.
    Now, when you play music on your computer or the Internet, the file will not be added automatically to your library.

Maybe you are looking for