Y560 cracked screen - replacing the screen LCD or LED?

Similar Questions

• Need advice replaces the screen HP Mini 2102

  Hey all,.

  I'm fixing a netbook HP Mini 2102 which was abandoned on the ground. The netbook works fine, except that now the screen is a little blurry and washed on the right side. Generally, when a computer screen is upward, trying to replace the converter display card, as was the case with a machine to HP Pavilion dv9000 I fixed recently.

  However, after dismatling the computer, I found no such ups on the screen, and after consultation with an HP support assistant very useful during a session of live chat who informed me that it is not a separate inverter Board available for purchase, I have come to believe that I need to replace the entire screen.

  If I'm not mistaken, the LCD part number is 589649-001 for this particular model that I am repairing. I created this post to confirm that the ups on this Mini Board can be replaced, and I need to replace the entire LCD screen - less camera, bezel and hinge, which all work fine - in order to solve the display problem.

  If you have any other suggestions as to what part I need, or if I have to take a completely different approach to the repair, please let me know before ordering the part of LCD screen.

  "Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.

  Hello

  You are right, you can save money simply select the good parts. I think not much.

  Good luck.

• Replace the power supply on my m9340f

  Hello

  I own a Pavilion Elite m9340f and I need to replace the power supply (it has the original), because the power on button failure, which I did research on forums and the solution replaces the power supply (psu led always on, for example).

  But I need to know exactly what kind of food I buy (amp, voltage, PIN number, dimensions, etc.) because I need help on the specifications.

  I'm not planning to upgrade the motherboard the case, original hp. I read in another post something on the power restriction and benicia supporting more than 450 watts power supply motherboard. I find this absurd information, because components draw necessary power from the PSU without worrying if it's 350 or 700 watts. So is one of the things that I need to be confirmed if there is restriction of power.

  Thanks in advance,

  Prince of Jeronimo Ramos

  Jeronimo, welcome to the forum.

  I believe that any standard ATX PSU must be inserted into the case.  I like Corsair and OCZ.  They are excellent manufacturers.  I suggest to measure the PSU existing and comparing measures to whichever you choose.  As far as I know, there is no restriction on the power.  I did this for a long time.  More than 550W to 600W in your computer is not necessary, however.

  If your problem is solved, please click "accept as a Solution.

• How do you get and replace the hp pavilion 3CR3050D6K LCD flat screen 20-b010

  Pavilion 20-B010 screen has been damaged and is cracked. I would like to get a replacement manual or instructions on execution of Assembly and disassembly.

  Hello @VB_Richard,

  I understand that you need to replace the LCD screen on your desktop HP Pavilion 20 - b010 all-in-One PC and you would like a manual or instructions on how to perform the installation.  The number of product of the screen, you'll need is 652255-001, which is the 20 "TN N-glare W - LED Non - ZBD Sam 250nits. With regard to the steps needed to install it I am you provide those below:

  Before you begin: remove the back cover and bezel.

  Removal of LCD Panel Kit

  1. place the entire middle frame on a smooth flat surface.

  

  2 detach the connector from the LCD backlight to the LCD.

  

  3. remove the four screws that attach the LCD Panel to the Central frame - the screws will be on the high or low or the sides of the Board according to the manufacturer of Panel. Each manufacturer will have its own stencils for the location of the screw holes.

  

  4. partially lift the bottom of the middle frame off the LCD screen.

  

  5. unplug the LVDS cable from the Control Panel before completely up the average frame off the LCD screen.

  

  Replacement LCD Panel Kit

  1. to install a new LCD Panel, align the top of the middle frame on the LCD Panel.

  

  2. connect the LVDS cable to the LCD screen.

  

  3. lower the average frame completely on the LCD screen.

  

  4. replace the four screws on the sides or the top and bottom of the Panel to fix the Panel on the Central frame. Use the location of the screws to the stencil for the manufacturer of the Panel that you are installing.

  

  5. replace the backlight of the LCD screen connector.

  

  If the new LCD Panel comes from a different manufacturer that the old LCD Panel, remove old backlight converter card connector and install the new connector on the card. The jury has stencils indicating the location of the connector backlight by manufacturer.  Configure the jumpers on the card of converter to match the Panel manufacturers. Painted stencil on the chassis of the Middle table configuration of rider by the manufacturer.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• 4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Bright screen, the lines and the 17 t-2100 CTO screen LCD replacement

  Screen CTO 17 t-2100 HP is light, or horizontal lines across the screen.

  LM125AV

  How to remove the screen from the base of the laptop and how to test the cable, or LCD itself?

  Replace the LCD for the correct option?

  Running Win7 64 bit

  Thanks for the clarification, I'll take that part then.

  Enjoy your solution.

• Replacing the screen LCD Z30 blackBerry for Z30

  I can't find the support Web site of the spare parts for my 30 Z in the Blackberry.ca. I am looking to buy a replacement screen LCD for my BlackBerry 30 Z if possible or any company that sells official part, I can do it myself, I just want to buy, thanks

  As Leslie said, eBay and Amazon have them, I've seen them for $45 - $70 each.

  Make sure that you don't get the Verizon version, you want the GSM model which is more common.

  I replaced mine and helped a friend with a replacement, it is a very simple process to remove the 8 screws and using a pry tool to open the back, disconnect the ribbon cable and then turn everything above.

  Good luck.

• Replacing the LCD screen

  Hello, so I will try to buy a new screen LCD for my netbook Acer aspire one. My model number is 756-877BCrr, but if I buy something similar to this, like for example, a model number that says: 756-877BCKK, it could still give me the same product or I need to find the exact same model find my LCD? Help, please!

  No problems. Simply choose between glossy or matte.

• How to replace the LCD screen Flex cable for a HP Pavilion dv4-1220us

  Can someone give me a step by step procedure replacing the screen Flex cable connection without disassembling the entire computer

  Lanny1 wrote:

  Thanks for the manual, I am waiting for cable to arrive. This whole process can finish by the enemy who me to try to replace the cable. I can finish with new computer

  Hello again!

  You are the very welcome.  You need to update with the results.

  Have a great day.

• ENVY of HP DV7 - replacing the screen 7230us

  Just a few questions if you let it. Unfortunlsoately my laptop fell on the floor and the screen cracked. I have a new replacement on the way. Mind you, I replaced the screens of laptops before gently and smoothly. On each of them, in the place where the cable Ribbon which extends from the motherboard and attaches to the screen he is and was a warning label 'do not touch'. Take this warning seriously I've always avoided this and do not touch.  On the WANT DV7-7230us the place where the ribbon cable connection is made it is difficult, but not impossible, to do not touch this area. It is a possibility, I might have to hold a small area to re - attach the cable on the new screen. My question is why he cannot be touched? I somehow damage the new screen if I accidentally touch or hold this area? Just one simple answer other than 'just don't touch' would be great.  Thank you.

  Al Hebert

  ahebert wrote:

  Just a few questions if you let it. Unfortunlsoately my laptop fell on the floor and the screen cracked. I have a new replacement on the way. Mind you, I replaced the screens of laptops before gently and smoothly. On each of them, in the place where the cable Ribbon which extends from the motherboard and attaches to the screen he is and was a warning label 'do not touch'. Take this warning seriously I've always avoided this and do not touch.  On the WANT DV7-7230us the place where the ribbon cable connection is made it is difficult, but not impossible, to do not touch this area. It is a possibility, I might have to hold a small area to re - attach the cable on the new screen. My question is why he cannot be touched? I somehow damage the new screen if I accidentally touch or hold this area? Just one simple answer other than 'just don't touch' would be great.  Thank you.

  Al Hebert

  Hello

  I think that the warning "do not touch" is intended for the Board of LCD screen.

• HP G60-645NR: replaces the screen of former HP laptop computer

  My screen cracked on my HP G60-645NR. I have a HP DV6205us is not in use and I was wondering if I can use this screen to replace the cracked the latest laptop screen or would it be more beneficial to raise the DV6205us HP and running. Currently it works very slowly.

  Hurry up one last at this price:

  http://www.eBay.com/ITM/HP-G60-15-6-glossy-laptop-LCD-screen-N156B3-L02-Rev-C2-/361364457292?hash=item542300074c

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Aspire v5 531P touch do not work. Replacing the screen? HLP

  my contact has always been funny. Sometimes, it might stop working and restart and it works again. My cuz fell and the screen cracked... (not bad) and to the touch has worked for more than a few days. now, it has not worked for a year. Can it be fixed with a tip? (I see no driver or driver update... at all) I tried uninstalling the driver and re install but I really don't think I did this right... I'M A NOOB! I get a new screen if I need to... I neeed advice. This can be corrected? If I need a new screen... which will fix my touch? How do I know that it will be? y at - it a test to show that a new screen will make my touch still works?  If I get a new screen... There are a few to choose from... Touch Screen LCD + Digitizer glass + bezel AND do I know all this?

  If a touch screen is cracked, it is never good. A crack is sure to have damaged the resistive layers in the touchscreen.
  You need to replace the screen. Yes it would.
  http://www.eBay.com/ITM/new-Acer-Aspire-V5-531P-V5-571P-laptop-LCD-screen-digitizer-glass-bezel-15-6...

  You must disassemble the laptop. Up to and including the motherboard to replace.

  If the touch screen did not work before it was cracked, he can't fix it.

• need to replace the screen in Sony Vaio VPCEH2JFX/B

  The Sony VPCEH2JFX/B has a screen 15.5 "in there, but it's cracked. I have an identical Rod 40 LCD with LED lighting is a size of 15.6 to return. Is this interchangeable and it'll work? »

  Hi Maxdog03!

  It is good that you know well with a laptop. I think what you need is the model number for the replacement of your screen - TS-N156-10407.

  I hope that helps!  -MarkC

  If my post answered your question, please mark it as "accept as a Solution.

• Replaced the cable. Now, the screen does not work. What could be?

  The cable coming out of the back of my monitor Apple Thunderbolt Display is fraying. I decided that rather than risk a short at a certain point, I preemptively replace the cable. On iFixit teardown photos, I decided to replace the cable coming out of the back of the screen myself instead of paying almost $200 to get an Apple service provider to do that here in Bangkok. Bought the cable on AliExpress for $12. It replaced. And... no dice. Screen has not come.

  My setup

  [MacBook Air]-[Thunderbolt Display]-[drive Thunderbolt]-[Cinema Display]

  with a key USB drive and Ethernet connected to the back of the Thunderbolt display

  Already tried this

  • First impressions were that the cable was defective. But then I noticed Ethernet came the USB has been mounted, Thunderbolt was mounted drive and after a reboot, the movie screen come also. Obviously, the cable has been working very well.
  • Second thought was that I'd neglected to plug some cables that connect the LCD to the main logic board. I checked. Seemed fine.
  • Third was maybe the serial number of the cable was somehow connected to the main logic board. So I put the old cable. Still no screen.
  • Tried to connect the screen with a Thunderbolt external cable, everything worked as well but still no image on the screen.
  • Tried more than 30 seconds and 3 hours disconnected as a "reset" of the screen. No change.
  • Restarted my laptop. No change.
  • Thunderbolt Display well plugged the drive and then into the MacBook, so change the sequence of the devices. No change.
  • Information reports under "Thunderbolt" the entire chain of devices, but under "Graphics/displays" system displays only the internal screen and Cinema Display.
  • Using the newly purchased cable as a Thunderbolt external cable works fine too.

  Question

  Does anyone have suggestions on what to try next?

  The logic card goes into a sort of locked mode when you replace the cable?

  Is there more than 3 flat cables connection + connection to the land between the Panel and main Board?

  Although there is no reason to think that this has been, how to test LCD screen still work given all these flat cable connectors?

  
  

  Note: There is no Apple here store.  Apple authorized service providers are without help. He suggested to replace the cable and the Panel at a cost that is almost the same as the purchase of a new screen.

  Some of the cables that connect the LCD to the main logic board, are very short. Careful lifting the LCD, because it will go away with strength cables once that raise you it more than 2 to 3 inches on the side of the camera module.

  The shorter cable of all is the LVDS cable. A short cable with gold plated connector. Although I have had reconnected the cable on the side of the logic board, I had wrongly assumed that the other end of the cable was stayed connected because all the band used on. Someone with experience of fixing these things said of his town for this cable to unravel by force and to be sure to check both ends of the cable. When I peeled back the tape, I found that he had indeed been disconnected. Reconnect, fiddling with the tiny workspace to get the logical side of Board of Directors of what properly fixed cable again and we were back in business.

  Apple authorized service providers here in Bangkok have quoted me $200 to replace the cable. I ordered the replacement cable Thunderbolt Display off AliExpress for $12.50. It was really simple to replace the cable, just to keep an eye on this darn LVDS cable opening to the top of the screen!

• Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.