Y560 Problem USB

Similar Questions

• Problem USB C

  I have problems when connecting devices since the update USB driver 2.33

  

  Now I need to restart the computer almost everytime I need to connect a USB key or an external hard drive to make it boot and display on the desktop. I tried to use the two memory sticks as well more regular sticks USB using the HDMI adapter's USB port.

  My IOS is OS X as shown 10.11.5 9.3.2

• The BIOS 1.90 solves all problems USB on Satellite M30X?

  Hello

  A few months after buying my M30x, I bought an external USB HDD to 200 G. The drive kept just disappear during use, so I took over, but the repair shop said they found nothing wrong with it. How you introduced me what s, update the BIOS 1.90.

  In any case, after the upgrade everything seemed dandy for real,
  and the drive worked fine. Fast forward to where the 2006/2007
  I bought two more external drives, a 2.5 "160G and
  a 3.5 "500G. The 160G is back to the store because he kept
  display errors, but he did on other machines too, so I'm
  get a new one soon.

  Now, the 500G seems to work without problems and I did 200G of this already, but this week training started acting funny. First of all, I dual boot Win XP and openbsd. OpenBSD disk went all crazy and to attach and detach sometimes 48 times in a row... so I said okay, maybe a bug in their implementation of USB. I have run windows again (ugh) and start copying files autour just randomly and bam, the disk disappears, and I get a screen blue, followed by a quick restart...

  at this point, I looked around as if there is an another BIOS update because my sixth sense tells me, it is still not right with 1.90, cause 2 operating systems may not be bad so I'm very inclined to believe that he is not yet 100% correct.

  Someone has seen something similar?

  Hello

  As much I know Toshiba does not provide any information what has changed with the new versions of BIOS and as a result, you could try only update the BIOS version and hope

  The 500 GB HARD drive is great device HARD disk that needs a lot of power?
  USB ports for laptop contains 500mAh and if the device needs more power as 500mah that it of possible that external devices may not work properly.

  I m not an expert in openbsd, but you can disable the saving on the simple USB ports on Windows.
  You can also try to remove the USB ports in Device Manager and after new restart you windows should recognize the ports again.

• LaserJet Pro P1102w installation problems - USB not recognized during installation

  Struggling to configure the P1102w - using the installation DVD that accompanies it, I go through the steps. When I get to ' turn on the printer, connect the USB cable to the computer ' the printer is not recognized. Is not dismiss it, he just can't get it - it is with Windows 8.1.

  Tried it on another laptop running Windows 7 - same problem. The installer sat on the market "in waiting to connect to the printer via the USB port.  When you connect, Windows recognizes a USB device and tried to install the device - came with an error that could not be recognized and need to contact the manufacturer for the installation files.

  Update Windows, computer rebooted several times, deleted the HP installation files and tried with drivers downloaded from HP website - same problem.

  Any ideas?

  I had the same problem when working on a clients computer.

  (1) it has been infected by viruses, so we had to make a Virus removal on his computer.

  So you want to make sure that your computer is virus-free

  (2) in most Windows 8 HP computers in particular, drivers automatically installs on the computer.

  Check your device manager and click on printers. It will show what is connected.

  On my computer it shows printers >

  HP P1102W

  I had to uninstall it, to install the software. Once I did that the computer was able to recognize the USB cable.

• Satellite A660 - boot problems USB after BIOS update

  Hello

  I own a Toshiba Satellite A660 and have recently updated the BIOS with the latest version (1.80). Since then, the laptop freezes on the splash screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
  It works without the memory flash connected and if I connect it after I enter the starting or the BIOS Setup menu. I can even start her like that.
  As far as I'm concerned, this is a serious regression. Is there a way I can downgrade to the version of the BIOS, or any other way to solve this problem? I rely heavily on external USB drives.

  Kind regards
  Claudiu.

  Claudiu salvation,

  That is really interesting, I have to say so I tested on my new Satellite A660 and Transcend 4 GB USB Stick. Well, I also installed 1.80 BIOS but I can t view this problem HARD drive is set as first boot device and all the other BIOS settings are default. The Toshiba screen and Windows computer starts as usual.
  No problem at all!

  Have you tested different USB devices?

  In General, it is not possible to downgrade BIOS. It is possible to an authorized service because Toshiba on page you can download the latest version only but I doubt it s a bug in the new version of BIOS because it works on my A660.

• Problem USB P10 (or disaster)

  Hello

  My display suddenly flashed white and the computer freezes, after that I restarted everything worked fine except all the usb ports.
  Device Manager is showing that the usb hub is working properly, and Toshiba PC diagnostic Tool V3.0.6 usb test.
  any suggestionsb?

  Thank you

  Hello

  It is not easy to say what may be the problem. In my opinion, it is possible that the USB ports are default. You can do the BIOS update and check if it will be better. Another possibility is to reinstall the OS and check again all the USB ports.

  After reinstalling if there is the problem even once please contact the Service partner. I suspect that the USB ports can be default.

• Tecra 9000 - problem Usb

  I recently bought a second hand t9000, when he came to one of the usb ports didn't work. It was completely inadmissible, but the other was fine. now, the other comes back with "unrecognized usb device" every time I put something in. any ideas?

  Hello

  Do you think that it s a hardware problem?
  Eventually it s only a bad setting in the properties for the USB port.

  Possibly the device external USB cannot be recognized because of the enabled USB power management.
  To turn off the power on the USB hub, follow these steps:

  1. click on start, run, type devmgmt.msc, and then click OK.
  2 expand the USB Bus controllers node, and then follow these steps for each USB root hub listed:
  a. right click on the USB root hub, and then click Properties.
  b. click the power management tab.
  c. disable the allow the computer to turn off this device to save power check box, and then click OK.

  You could also try to remove and reinstall all USB controllers
  To remove and reinstall all USB controllers, follow these steps:

  1. click on start, run, type sysdm.cpl in the Open box, and then click OK.
  2. click on the Hardware tab.
  3. click the Device Manager button.
  4. develop Bus USB controllers.
  5 right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  6. restart the computer and reinstall the USB controllers.
  7. connect the removable USB storage device and test to make sure that the problem is solved.

  Buddy a note; Please make sure that all the fixes and patches SP2 is already installed on your laptop!

  Good bye

• Problem USB 2.0 on Satellite P200-1JR

  I bought my laptop about a month ago, and yesterday I tried to use my flash drive.
  After noticing that he took too long to transfer data, I checked the usb ports in Device Manager.
  It shows that I have five simple USB and two USB 2.0 host controllers.
  Changing the display 'view of the connections' I realized that my 6 USB ports share three of five simple USB controllers.

  The laptop is supposed to offer 6-Port USB2.0... well, it doesn't.
  (Also under Vista 32-bit, with 3 GB of Ram)

  The service guy told me to format, but this does not solve anything.
  I also got BIOS 2.30...

  Any ideas?

  Post edited by: kostas_kompostas

  GMC

  have you tried to reinstall the chipset drivers? You may need to check www.intel.com and download the latest chipset drivers for your machine.

  Another suggestion is to check that the sites of microsoft support for USB problems since Vista is known to work intestinal and I guess that there must be something on USB to find...

  Welcome them

• Satellite M40 - problem USB

  Hello

  I am the owner of a Satellite M40-129 and it seems, I have problems with USB.

  When I stopped the WinXP system, I think that it is in English, hibernate mode and try to restart, I get a blue screen with the text and with a failure message, the file "usbport.sys" caused the crash.
  In addition, I use all three usb ports. On, I use a USB 2.0 on the other Hub usb hub 1.1 and the mouse directly on the third port. Since a few days, I installed a printer multifunction Brother on the USB 2.0 hub, but from the beginning of the system, I can't connect to the internet, because I always get a new failure message, that the (Allied Telesyn AT AR215) DSL modem is already in use or another usb device is improperly installed. To solve the problem, I tried almost all the positions of USB port for both devices and I de - and reinstalled the two train several times. But in addition, I have updated the BIOS yesterday, but without success. No, I use either only the internet with disconneted printer or the printer does not have access to the internet until you restart without connected printer.

  I hope someone can help.
  Thank you
  Thomas

  HI Thomas

  Sorry, but it is not easy to give you a good explanation. As far as I know a few other components materials don t support hibernation procedure. The problem is that if the unit goes into hibernation mode every process must be stopped and some of them cannot be stopped on the easy way and stop correctly but forced to shut down. I'm sure that your device goes into hibernation correctly mode if there is no external device. Am I wrong?

  Try to remove all external devices and after that, go to the Device Manager. Remove the USB ports and restart the device. After a reboot all components will be recognized and installed correctly. Check if the modem works correctly if there are no other USB devices connected to the laptop.

• Re: Satellite L300D-242 - multiple problems, usb ports, some keys on the keyboard

  Hello

  I'm having some problems with my computer laptop sateliite, everything worked fine until I changed the operating system from windows vista to windows 7 and now my USB ports arnt working, sometimes they work and sometimes they are not but its never the same one that works he constantly of the changes, also on my keyboard the game Skip, stop, mute buttons have stopped working.

  Can someone help me please?

  Thank you

  Hello

  To get to play, pause and other buttons works, you need to install the VAP (value added package).

  The USB ports are controlled by the chipset, so I recommend you to install the chipset driver to get this resolved.

  I hope this helps a little

• Satellite L670-143 - problem USB or midi

  Hello

  I have a Toshiba laptop with 64-bit windows market 7.
  I recently bought DJ Mixer with midi control an allen and heath xone db2. When I connect it to the usb port it works for a minute and then stops working. I tried all usb ports and have the correct driver installed, but nothing works.
  Next to the mixing table, I have a midi controller allen and heath xone k2 and it works fine on my Toshiba laptop.

  I also have another laptop (Medion) as well as the works of mixer on this laptop, so the unit is not broken.
  Anyone got an answer to my problem.

  Just a question: do you have other problems using the USB ports?
  I mean other USB devices are working properly?
  If you have any other problems using the USB ports in connection with other USB devices, I don't think this problem is related to the laptop.

  However, it may still be a compatibility problem between two devices, but in this case, you should check out midi mixer manufacturer page for some details.

  In my opinion, you should check if you have installed the software correctly.
  I read the XoneDB2 manual and it mentions some important details (installation of PC page 28).

  1. connect the XONE:DB2 your grid and turn on.
  Do not connect the DB2 to the PC at the moment.
  2 open the Drivers folder and run Setup.exe.
  3. Select your preferred language
  4. Select install driver
  5. When prompted, connect the DB2 to the PC with the USB cord.
  6 If this window appears, select Install.
  7 the USB driver will now install.
  8 If this window appears, select Install.
  9 restart to complete the installation.

  + The installation process may differ slightly depending on the operating system and +.
  + Security software. +
  + * Note: * always use the same USB with your XONE:DB2. When installing on a MS +.
  + System Windows, drivers will be involved through the USB port to which you are currently connected. If you try to use the DB2 with a different USB port, or without having to install drivers at all, the system can operate but with degraded performance (XP, Vista, Windows 7), or may not work to +.
  + all (2000) +.

  + * Driver Installation check * +.
  + Once the driver installation is complete, you will need to check that the XONE:DB2 is recognized. Connect the XONE:DB2 to your PC/laptop and then right-click on my computer and select manage. Then select the Device Manager in the left window. Expand the section sound, video and game controllers to reveal the WDM audio and MIDI for the XONE:DB2 drivers. Expand the Bus USB controllers section to reveal the XONE:DB2 ASIO driver and its version (version) in this case number V2.9.31. +

• Problem USB with Satellite P100-219

  I have problem with USB on my Toshiba. USB peripheral Al are working except memory usb and external hard drive. USB and hard are OK. When I connect to them it says device not recognized USB. I have win 7 ultimate, but I also try XP and it does not work on XP or Win7.

  Can it be related BIOS. BIOS is Phoenix 4.80, Toshiba support was last updated. Motherboard drivers are also updated. But I don't see any fucntion USB in the BIOS?

  Someone has an idea? (all common as uninstalling the drivers or similar metodhs are already done)

  THX in advance

  Tom

  Hey,.

  Load default settings in the BIOS after update BIOS?

  In your case, I would also try updating the chipset driver. You can find the newest one on the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Problems USB HDD - FW6.4.0 related to the recent update?

  I have a RN102 - 2 x 2 TB disks.

  In recent days, I had trouble with my backups to break USB hdds - many that I share, try to solve the problem.

  I'm not at the point where the RN102 usually will not start right when a USB drive is attached, and if I get it upward, (RSYNC) backup jobs fail before time-out errors.

  I'm seeing lost things in dmesg that indicate a USB problem, but I'm not an expert to find out exactly what:

  [172.121896] xhci_hcd 0000:02:00.0: @000000001f630700 00000000 00000000 0c 01078001 000000
  [172.121904] xhci_hcd 0000:02:00.0: transfer ERROR event for the disabled endpoint or incorrect flow ring
  [172.121914] xhci_hcd 0000:02:00.0: @000000001f630710 00000000 00000000 0c 01078001 000000
  [172.121923] xhci_hcd 0000:02:00.0: transfer ERROR event for the disabled endpoint or incorrect flow ring
  [172.121933] xhci_hcd 0000:02:00.0: @000000001f630720 00000000 00000000 0c 01078001 000000
  [172.121958] sd 3:0:0:0: [sda] tag #26 uas_eh_abort_handler UAS-tag 27 inflight 0: CMD in
  [172.121970] sd 3:0:0:0: [sda] tag #26 CBD: ef Read (10) 28 00 00 02 18 00 00 08 00
  [172.122007] xhci_hcd 0000:02:00.0: transfer ERROR event for the disabled endpoint or incorrect flow ring
  [172.122019] xhci_hcd 0000:02:00.0: @000000001f630740 00000000 00000000 0c 01078001 000000
  [172.122028] xhci_hcd 0000:02:00.0: transfer ERROR event for the disabled endpoint or incorrect flow ring
  [172.122038] xhci_hcd 0000:02:00.0: @000000001f630750 00000000 00000000 0c 01078001 000000
  [172.122046] xhci_hcd 0000:02:00.0: transfer ERROR event for the disabled endpoint or incorrect flow ring
  [172.122056] xhci_hcd 0000:02:00.0: @000000001f630760 00000000 00000000 0c 01078001 000000
  [172.122082] sd 3:0:0:0: [sda] tag #27 uas_eh_abort_handler UAS-tag 28 inflight 0: CMD in
  [172.122095] sd 3:0:0:0: [sda] tag #27 CBD: ef Read (10) 28 00 00 02 20 00 00 08 00
  [172.122132] xhci_hcd 0000:02:00.0: transfer ERROR event for the disabled endpoint or incorrect flow ring
  [172.122144] xhci_hcd 0000:02:00.0: @000000001f630780 00000000 00000000 0c 01078001 000000
  [172.122153] xhci_hcd 0000:02:00.0: transfer ERROR event for the disabled endpoint or incorrect flow ring
  [172.122163] xhci_hcd 0000:02:00.0: @000000001f630790 00000000 00000000 0c 01078001 000000
  [172.122189] sd 3:0:0:0: [sda] tag #28 uas_eh_abort_handler UAS-tag 29 inflight 0: CMD in
  [172.122201] sd 3:0:0:0: [sda] tag #28 CBD: ef Read (10) 28 00 00 02 28 00 00 08 00
  [172.122238] xhci_hcd 0000:02:00.0: transfer ERROR event for the disabled endpoint or incorrect flow ring
  [172.122250] xhci_hcd 0000:02:00.0: @000000001f6307b0 00000000 00000000 0c 01078001 000000
  [172.122275] sd 3:0:0:0: [sda] tag #29 uas_eh_abort_handler UAS-tag 30 inflight 0: CMD in
  [172.122288] sd 3:0:0:0: [sda] tag #29 CBD: ef Read (10) 28 00 00 02 30 00 00 08 00
  [172.122367] scsi host3: uas_eh_bus_reset_handler start
  [172.240448] usb 3-2: reset SuperSpeed USB number 2 of the device using xhci_hcd
  [172.263248] scsi host3: uas_eh_bus_reset_handler success
  [172.625611] usb 3-2: urb stat: status - 71
  [172.629265] xhci_hcd 0000:02:00.0: error event unknown condition 199, probably broken HC

  So, what could be my problem:

  a. something upward with FW6.4.0?

  b. I have a lot of faulty HDD USB (I check them with Seatools for sure)?

  c. the RN102 is defective?

  (d) another thing?

  Any help would be appreciated.

  Ian

  Hello

  Just realize, how complete this thread...

  I updated my RN102 to v6.4.1 and retested the portable drive which was complicated with v6.4.0. It seems that whatever the problem, it is, it has been resolved and I have successfully completed a full (via RSYNC) backup on this drive.

  Ian

• Problem USB on M40X-286

  Hi, M40X-286 don't reckognize some USB devices such as a mouse and a camera (USB 2.0). USB devices are reckognised on a DELL Inspiron without problem.
  The device is not on the M40X reckognised. When I try to look for a new driver then the machine does not know the USB device.
  What should do? I do need to update something?

  Rudy

  Hello

  Try to remove the USB Device Manager. After starting the OS should recognize the USB again. Then again the connection of the devices.
  However, check the BIOS settings and the version of the BIOS.

  Have you installed SP2?

  Good bye

• Y560 - problems when running games

  Hello world

  I bought the Y560 about a year and half ago and I was a proud owner since.

  A few days ago I formatted drives, then reinstalled Windows and since I have problems executing Battlefield 3.

  The problem is this: after a few minutes of play, the screen freezes and I can't hear a sound of "grrrrrrrrrrr" on the speakers. I can not give any command keyboard and can only force - turn off the laptop.

  I had no problems to run the game before you reinstall Windows, so I guess that the problem lies in a driver conflict, but how do I know which drivers are the cause?

  Anyone have any ideas on how to solve this problem?

  Thank you very much

  Vyksa

  Problem solved! It turned out that the problem was with the game.

  Thanks to you all.