Y560P card number: sleep mode and headset to the connected socket

I searched the forum as much as I could and did not find this issue to be considered.

So, sometimes I listen to music with headphones or even after a Skype call, I leave the connected headphones. If I put the laptop to sleep and wake it back up, unplug the headphones will not return my sound setting to speakers; I can't hear any sound if I plug the headphones in the back.

I tried to connect and the new: no change. I tried to disable and re-enable "Realtek High Definition Audio" in the Device Manager: no change. Uninstall and reinstall it wouldn't be a good solution if it had to be done all the time. The only thing that it returns to normal is turning works again... typical I.T. solution. Is there a driver update to solve this problem?

Speaking of driver updates, I guess that I can't find any BIOS update or updates to driver for the ideaPad due to the recall of Sandy Bridge?

UPDATE: sorry... found the lenovo support site area sub consumer that is different from the IBM one... Argh...

judge that?

Tags: Lenovo Notebooks

Similar Questions

  • After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

    Original title: most of the programs have disappeared from the start menu.

    Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

    Help please

    Hello

    Please see below for a possible solution:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

    Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

    Difficulty of a corrupted user profile

    http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  • Unable to change screen turn off or sleep modes, it gives you the choice, but does not take account of their

    Why windows 7 with service pack 1 does not change screen turn off or sleep modes, it gives you the choice but he ignores them

    Hi William,.

    1 did you changes to the computer before the show?

    2. What is the brand and model of the computer?

    Please follow the instructions to troubleshoot the computer's power:

    Method 1: Run the troubleshooters mentioned:

    Open the troubleshooter of power
    http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

    Method 2: Update the latest display drivers

    1. Click the Start button
    2. Select Control panel
    3. Open Device Manager
    4. Expand the graphics card
    5. Right-click on the drivers, and then select update
    6. Restart the computer

    Method 3: Scan SFC Run in the computer

    Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows system files
    http://support.Microsoft.com/kb/929833

    Method 4: Check the link to solve power problems in Windows 7:

    On troubleshooting in Windows 7 power management
    http://support.Microsoft.com/kb/980869

    Let us know if you have other questions about Windows in the future. We will be happy to help you.

  • Satellite Pro T130 - problems in sleep mode after you install the update wireless

    After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

    My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

    Please help us :-)

    You have installed the updates recommended by Tempro?
    You can send us you have installed versions?

    I assume that with the old versions you didn t have this problem?

  • HP Pavilion starts extended standby/sleep mode and stays there - there is nothing on the monitor

    I have a desktop HP Pavilion Elite HPE-250f (Core i7).

    I have been using internet. Suddenly the computer makes a little sound, and the screen went white. The computer seems to be in hibernation / sleep normal. Generally, when the computer goes into standby/sleep mode (after a certain period of not used), the color on the power button turns from blue to yellow. But this time, the blue color.

    Usually, I can move the mouse and exit this mode. But this time I moved the mouse and nothing happened.

    I pressed and held the power button and turns off the computer. I then turned the computer back on. The power button is blue, there is a green light on the back of the computer, and the fans were at work. But nothing on the screen.

    I rebooted several times, and there is nothing on the screen. There is no beep when the computer is restarted.

    What should I do? Help, please. Thank you.

    I removed the RAM memory cards and reinstalled them. That solved the problem.

  • HP OfficeJet 3830: 3830 HP wireless printer is offline in "sleep mode" and don't wake up to print

    I've just set up a HP OfficeJet 3830 as a printer connected to my network wireless domestic (Airport Extreme Base Station router 802.11ac wireless). I was able to print-out of my MacBook, but when the printer goes into sleep mode, it appears offline and unresponsive to print. I have to restart the printer for her to appear online and respond. The printer will be in the basement, so it would be very inconvenient down to reboot just to print it. Kind of defeated the purpose of a wireless printer. I tried to disable the sleep mode to see if it works, but sleep mode settings cannot be disabled in the printer preferences. I already spent 3 hours to solve this problem.

    I contacted HP technical support to solve the problem. The person told me restore default settings and then unplug the power to the printer and the router wireless for 30 seconds. After restarting the router, then the printer, we have connected the printer to the network with a static IP address. Who did the trick. Even if the printer is in "sleep" for several hours, it has not disappeared in offline mode, as it is done before. Problem solved for now. Hope this helps others.

  • When I put the computer on the mode 'sleep' it goes into sleep mode and then restarts on its own.

    Have Vista Home Premium. When I put the computer on the mode 'sleep', it closes and moves to the State of low consumption with the screen. But in a few seconds without touching the key or mouse it starts again. What is going on?

    Hello

    See if this information helps you:

    "How to restore the default power Plan settings in Vista"

    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    "How to solve a problem of Mode Vista or Windows 7 sleep"

    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    See you soon.

  • Setting monitor in sleep mode and I can't wake him up without having to reboot.

    I can't wake up my monitor after he starts in mode 'sleep'.  I have to restart.  It usually takes several resets to get the monitor to stay.  I put the controls for "never sleep", but he did it anyway.  This has happened after that the computer has not been used for about 4 weeks.

    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Try to reset the default power Plan settings. information is at the link above.

    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

    And how to solve problems in Standby Mode is at the link above.

    And read the information of 'Related links', too.

    See you soon.

    Mick Murphy - Microsoft partner

  • WINDOWS 8 enter "the sleep mode" and not to wake up, necessary reset.

    PC:Samsung np530ub
    OS: Windows 8 pro x 64
    What happens, laptop in sleep mode: off of the screen, drive hard light stop, Dungeon of light wireless on, seeing power keep on... Press the power button to wake the computer nothing happens. have to hold the power button to reset the machine.
    It happened once in all, but now is every time. Cleaning of the NET solution... nothing has worked
    what I've done so far:
    updated drivers
    windows update
    bios update
    turn off wireless and bluetooth
    activate usb bios s3
    the powermagement on devices tab
    power management - see if any device in the way of fashion is "Eve". powercfg-applications
    powercfg - requestsoverride driver \FileSystem\srvnet system
    check the multimedia device sharing (disabled)
    hybrid mode (off)
    disable the fast startup (disabled)
    Powercfg - devicequery wake_armed (return NONE)
    for now I have disabled the quick start and "sleep" mode...

    Hi Leo,

    We appreciate your efforts.

    Have you updated the drivers from the chipset on the computer? If this isn't the case, I suggest you to update and check if it helps.

    Step 1

    Run the electrical troubleshooting and check if it helps.

    a. press Windows + W on the keyboard.

    b. type Troubleshooting in the "search" tab and press enter.

    c. click show all on the left panel.

    d. click Power, will new popup window.

    e. follow the instructions on the screen.

    Step 2

    Delete the current power management and create again.

    Check out the following link to change the plan of power to your needs.

    Power plans: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-8/power-plans-FAQ

    See the section: how to create and delete a power plan

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • Vista goes into sleep mode automatically just after the restart

    The following problem was irregular. Sometimes, other times not. I'm totally frustrated as to why it is happening and I would like to solve this problem, now and forever.

    Yes, first facts: I have an Asus G71Gx laptop game with Nvidia Geforce GTX 260 M. 6 GB of memory, Windows Vista 64-bit. Do not think that other information is necessary, unless I'm mistaken.

    The problem: well, just after the start/start my laptop goes into sleep mode. As in, Windows starts fine and I see my desktop with all the shortcut icons and the background, and then all of a sudden the screen goes black (with two Dim lights blue on the screen - fellow Asus G71Gx users will know it), and the power led button flashes slowly in and out, as if it was in sleep/hibernation. The led light cover mode monitor "sleep". I did the whole "all never put under power options. I've updated my Nvidia graphic drivers for later. I even disabled Hibernate in the command prompt. Seriously, I have above average PC knowledge. But it has trampled me... everything short.

    Sometimes, I have to go through this cycle up to 9 or 10 times and then stops. Other days there is no question. But I still have to reboot just to be safe and to avoid the game stutter (another question that I don't know what it is, since I was the latest GPU drivers). But I can live with that.

    It cannot be an overheating GPU. I mean, it's at the start and at the present time, it is cold enough to have this piece as a cooler for the GPU! Haha.

    I thought about possible power supply problems. But how to test it? The laptop doesn't have it, the first week I got it. I use an adapter to put the American card in European decision-making.

    It is the ONLY major problem I have with this laptop. Sleep at startup. The other two, being game stutter if I don't restart my laptop and double tapping (seems to be an Asus problem according to the forums), are quite minor and I can live with that.

    Any help with this would be GREATLY appreciated. I'm VERY tempted to get windows 7 and do a clean install, but Vista was not really giving me any problems. But if I know that this issue is associated with Vista, then I say Bravo to Vista...

    Edit: Apologies for writing this thread Windows 7 and explore the internet forum. Don't know how it happened! Well I'm leaving here now, and hopefully this will get sorted.

    After 2 replacements of mobo that apparently caused this same prob, what finally fixed for me has been updated the chipset drivers.

  • How can I turn off the sleep mode in Apple Watch the temporary?

    Guys,

    My wife is studied for his chiropractic studies and tried to use Apple Watch as a timer so that it checks the patient's pulse, but she is unable to use the watch due to the sleep mode. Plu wake screen is 70 seconds as described in settings. Is it possible that it can disable temporary screen wake up so she's doing the pulse testing?

    Justin

    Version: Watch OS 2.1

    Hi Justin

    It is not currently possible to disable the sleep of the Configuration screen. The longest time that the screen can stay awake without further interaction is 70 seconds (subject to activating first the setting you describe).

  • Units of the number of samples and rates for the DAQ Assistant units

    Hello

    I use the DAQ assistant for analog voltage of an input OR data acquisition card. What is the difference between the rate and the number of samples in the DAQ assistant and what are the units of the two?

    Thank you.

    The number of samples is how many discrete to measures. Rate (per second) is how fast to acquire the specified number of samples.

    If number of samples is 100 and the rate is 1000 samples per second, then the acquisition would take 0.1 second (100 / 1000).

    -AK2DM

  • Laptop with Windows 7 not waking from sleep mode-impossible to repair the files

    My laptop has been not wake sleep for the last days. I think it may have something to do with a recent update. I ran scan SFC who originally gave me the error "Windows resource protection could not perform the requested operation." After using "chkdsk /f/r" the SFC scan was able to complete and it finds corrupted files. Here's what she has (don't know if files below are the same):

    2015-02-24 22:37:35, CSI Info 0000010b transaction [SR] beginning verify and repair

    2015-02-24 22:37:47, Info CSI 0000010 d [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2015-02-24 22:37:57, CSI Info 0000011a [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2015-02-24 22:37:57, CSI Info 0000011b [SR] this element is referenced by [l:150 {75}] "' Package_2_for_KB2506212 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.2.2506212 - 4_neutral_GDR" "
    2015-02-24 22:37:57, CSI Info 0000011e [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\windows\System32"\[l:20{10}]"Mfc42u.dll '; source file in the store is also corrupted

    2015-02-24 22:44:04, CSI Info 000001e5 transaction [SR] beginning verify and repair
    2015-02-24 22:44:07, 000001e7 CSI Info [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2015-02-24 22:44:07, 000001e9 CSI Info [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2015-02-24 22:44:07, 000001ea CSI Info [SR] this element is referenced by [l:150 {75}] "' Package_2_for_KB2506212 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.2.2506212 - 4_neutral_GDR" "
    2015-02-24 22:44:07, 000001ed CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\windows\System32"\[l:20{10}]"Mfc42u.dll '; source file in the store is also corrupted

    Any help would be great!

    Hi Esque,

    Thank you for the information.

    Please let us know if you have followed the troubleshooting procedures provided in the response ofVitoux K replied on 6 March 2014. (given in my previous post)

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-wake-the-computer-from-sleep-mode/6054e168-6f56-43A9-a8c1-5a01e9a288fc

    If the problem persists, suggestions, please follow the link above and let us know the results.

  • Why is my "sleep mode" not hightlited in the Start button?

    I can not put the mode 'sleep' in my computer windows 7 system of operating; It is not highlighted in the right button of shutdown?

    Hi, Irvin,.

    Here's a few things you can try to get this issue fixed.

    1 visit the computer manufacturer website and download the latest video drivers and then install them and check.

    2. If the problem persists, follow these steps.

    -Type Cmd.exe in start search and right-click on cmd.exe and select run as administrator.

    -Type powercfg /Hibernate on

    -Type powercfg - h

    (Print the results here coming in the command prompt window)

    It will turn on the hibernation. Restart the computer and check if the Sleep button is still gray.

    In addition, through http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions

    Hope this information is useful. If you have any questions, please let us know.

  • Win runing XP two monitors in DualView mode and not remembering the last size and location of the records? How to solve this problem?

    I am running WinXP SP3 with two monitors running in DualView Mode and everything worked as expected until I installed the latest NViDIA drivers.

    After the update of the pilot, all windows and folders open centered on the main display and all pop-up windows from any open window, centered on the secondary display.

    Any changes to the size and the location of the windows and/or files is not saved.

    I searched the Internet for solutions and found nothing.  I tried Microsoft FixIt to the more obvious (said) problem similar to mine and it did not fix the problem.

    I finish the registery fix suggested and it fixed the problem.

    Any suggestions?

    Please notify.

    Roger P. Hendrix

    Hi Roger,

    1. have you tried to uninstall the Nvidia drivers (if you do not want to make install)?

    Follow these steps and check if the problem persists.

    Step 1:

    Uninstall the Nvidia drivers and check if that helps.

    a. Click Start, click Run and then type devmgmt.msc.
    b. right click on my computer and click on manage, and then click Device Manager.
    c. right click on my computer, click Properties and click the Hardware tab, then click Device Manager.
    d. click right Nvidia drivers and uninstall it.

    Step 2:

    Do e restor systemto the point that your computer was working normally and check if that helps.

Maybe you are looking for

  • Re: Satellite A500-1f4 eco utility, intel RST, utility of the flash card does not

    Hellomy name is Ashraf Shahin I own a Satellite A500 - 1f4.yesterday I installed the new BIOS update to 1.50 on the site of toshiba, and after that my eco utility, displaying flash cards, intel RST service are not running.please help me Concerning

  • How to disable the microphone on Satellite A100?

    Hello! First of all, I have a somewhat stupid question: what is my Satellite A100-547 has a built-in microphone? If she has one - how can I disable it and use the external microphone of my helmet? If I want to talk to others in Teamspeak, the others

  • Mail broken after upgrade to 10.11.2

    Just installed automatic updates without checking what they have first. Stupid.  Now I El Capitan 10.11.2 and when I try to open a mail, I get the window Mail upgrade, with a message 'Validation of the mailboxes' and everything is grey, including "Ca

  • kb982332

    I can't install kb982331 please help me I turn of the auc and still have the update

  • How to install free adobe flash player - my security settings won't alow it

    I try to install free adobe flash player - I'm not computer, my security settings do not allow "facility and I have tried to disable firewall briefly." I can't activate this procedure occur! I would be really grateful for your help.