y570 special buttons don't is not lit

Similar Questions

• SCXI power light don't is not lit

  Hello

  Is there a swtich to the SCXI other than in the condition before the case of a PXI 1050 chassis that will turn the monitor for SCXI slots? the led does not illuminate.

  Have you checked the fuses and the circuit breaker on the back of the chassis? Refer to the manual for their locations and sides.

  http://www.NI.com/PDF/manuals/371481a.PDF

  -AK2DM

• Display of white/keyboard blackBerry Smartphones don't is not lit

  Pulled my phone out of its holder and noticed the icons have several lines of pixels removed and all titles are in dark blue.  Pulled the battery for 30 seconds, put it back in and when the telephone came, there is no display on the touch screen and backlit keyboard would not work.  The only thing I get is a fixed red light for about 3 to 6 seconds, and then it turns off.

  Tried soft and hard reboots with no luck.

  When it is plugged into the computer via the power cord supplied with the phone, the desktop software does not see the phone.

  Any ideas?

  Warranty technicians tried two new batteries with no luck.  Swapped the SIM card and storage with a new phone and everything worked.  Assumed it was something with the phone.  He had run to warm up the last 10 days or more.

• Qosmio F50 - 10K - multimedia keys are not lit

  According to my topic

  "" Qosmio F50 - 10K - replaced by Qosmio F60-126? ".
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59934&TSTART=0

  I had problems with my laptop, located at the Nvidia 9600 M GT graphics according to Toshiba service. They changed the graphics card with a new one today and so far everything is going very well and smooth. He collapsed again. Time will tell whether or not it returns to his old ways.

  In any case, after I took up my F50 - 10K I noticed that the indicators for media buttons (Play / Pause, Stop, Dolby, etc) are not lit. The buttons work fine, but they are not on. All other indicators (the light bar on the touchpad, the volume light) and the power light work fine. There is a button to deactivate/activate the indicators, but it does not work for media indicators.

  Before giving my laptop to the service of all the indicators were at work. Now, the indicators of media came out. No idea how to re-enable?

  Hi Jwrath,

  I doubt s a hardware problem because they do not work properly and the lit / functions are controlled by added value package. In your case, I recommend reinstall Toshiba Value added Package from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Remove the VAP, restart the computer and install the new VAP software.

  In addition, check the BIOS. I don't know if there is an option for Mr. lighting if so, enable it and that s.

• Words don't is not displayed after the update to iOS10

  Many songs in my library have incorporated the lyrics (that I added using the 'Words' of iTunes tab). I'm used to be able to see everything while listening to the songs on my iPod Touch by tapping the image "sleeve" of the song.

  After the iOS10, this method does no more work. The other method, new to iOS10 (a special menu item "Words") does not either, as I don't see this anywhere menu item for all of my songs containing words. (Someone said that this function only works for the songs in Apple's music.)

  What should I do to restore this feature? Return to 9.3.5 or wait until Apple condescending to people like me who want to be able to read the lyrics while listening to the songs and who do not want to subscribe to the Apple's music?

  Form the iOS 10 manual

  See the lyrics. Drag until you see words, and then press Show to see. Press Hide to hide.

• Firefox don't support not any page after some time.

  I'm having a problem with firefox while surfing after a while. For example, during the first 15 minutes, there is no problem, after a while firefox does not load any page, I have to close and reopen again to make it work. While firefox does not load, I can use other browsers as usual. It just don't load not any page at all, but the program itself is so I can close it with the X button. What could be the problem, I'm using firefox last.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections 256-30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  See also:

  • http://blog.bonardo.NET/2011/09/30/is-your-firefor-freezing-at-regular-intervals
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• [URGENT] Vibe Z2 phone Pro is not lit after selecting «encrypt phone»

  Dear staff of Lenovo,

  Me'm Sudhakar works for Intel, Bangalore. I use the phone for 4-5 months and had some problems of exchange messaging features. So I did a factory reset and tried to quantify phone to install the certificates.

  After you select Encrypt phone (phone was at the same time under load 80 + %), phone started and stopped at screen Lenovo. Waited for 10 minutes and then I turned off because the screen does not move even to encrypt page. He always showed the Lenovo screen only. So I did a power OFF using the power button / stop, but now the phone is not yet on.

  Tried pressing the hard power button, but it is not powered.

  Can you please help? What should I do now?

  This is an urgent request that the phone is unusable.

  Thank you

  Sudhakar

  91- ****************

  (Bought the phone using India Flipkart)

  Moderator Note: phone removed for the protection of the Member.

  Dear staff of Lenovo,
  Phone started to work after leaving unattended for 3 days. Battery is completely empty and after that when I plugin the charger the LED started to blink red and the restoration began to work... Not sure why the battery should be drained completely.

  A factory reset after that and now phone is functional...

  Thanks - I'm glad I don't have to visit the service center

  Thank you
  Sudhakar

  Note from the admin; personal information in order to avoid misuse.

• brightness buttons don't no brightness setting. HP 2000-2110tu laptop

  HP 2000-2110tu laptop

  Windows 7 ultimate

  brightness buttons don't no brightness setting. I don't know exactly but maybe I installed the bios f.34.

  Hello Ayajanna56,

  I understand the brightness buttons do not work properly is that correct? I'll do my best to try to help you with this problem.

  It was actually released a newer BIOS for your system. Clink this link and installed and see if that helps. Plug the power adapter before you install it and remember to save first download and then install it.

  If I was helpful, or if you want to say thanks you can click the White Star under my name to give me congratulations.  I really appreciate it.

  Please answer as soon as possible with your results.

  Thank you

• Control Panel more HP Officejet Pro 8600 not lit and will not work

  Control Panel more HP Officejet Pro 8600 not lit and will not work. It worked except the last 4 days. I can use certain features of the computer as a scan but can not manually use Control Panel. Nothing DOES not illuminate. The power button is on but only weakly.

  Hi kwhofms,

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• Songs by repeating the same if the repetition is not lit

  Hey guys, I'm new to this forum and I have a problem. My e260 continues to repeat the song even if the repetition is not lit. usually I could push the button before jumping on the right side and he would return to the menu music (one that has options, the artist, album etc...)

  any help here?

  Access songs (music > songs) and look at the alphabetical list.  At this level, you see if all the titles appear two times.  I had this happen when you transfer an album to the microSD card, then swap to another player who has the same album in the internal memory.  The songs on the map will display a small map icon next to them.

  If you transfer a track in MSC mode, then back to PSG, you have duplicates, since from the PC, you will not see both modes at the same time.

  Finally, if you use audio formats or codecs, lists the two versions of the song.  For example, I have FLAC a MP3 copy, as well as a copy of a song in memory (the e200 has not been granted ability FLAC, but the same thing will happen if we have a copy the other MP3 and WMA).

  Bob

• How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Firstly - I work in InDesign CC 2015.

  My problem is, I had this 10 page document, which, on every page, shows an object that must be in PDF format - but do not print. I made this object into a button and unchecked "Printable". On top of this object, I made 10 hyperlinks (separate layer) that point to the page 1-10.

  When you export the document and I use the interactive PDF format , works ' show nonprinting object but do not print ' well, BUT hyperlinks don't. If I uncheck the "layer of nonprinting objects" in the file PDF, then hyperlinks work, but the problem now is that the nonprinting objects are invisible...

  When you export the document and I use a PDF to print the "unprintable object show but do not print" does not work BUT the hyperlinks don't...

  I put hyperlinks to post a link to pages and also tried the link to the anchor text. No difference.

  So my question is: How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Thank you

  Mette from Denmark

  I swapped my links to the buttons - AND NOW IT WORKS; (o)

• Suddenly buttons Don t work

  
  Suddenly buttons Don t work. I have a clip of navigation with flash, - referencer keys and husbyggeri expands when you press the button. It worked fine - but now many vistors do push twiche so they shal see site, this means many leave because he do not work - no one knows what's happening?
  my video is here: http://www.fjerring.dk/menu/

  Bulder wrote:
  >
  > Buttons suddenly don? t work. I have a clip of navigation with flash keys, -.
  > referencer and husbyggeri expands when you press the button. It worked fine-
  > but now many vistors do push twiche so they shal see site, this means
  > many leave because he do not work - does anyone know what? s happening?
  > my video is here: http://www.fjerring.dk/menu/

  Let me guess, it happens in IE?
  Google search for "click to activate".

  --
  Best regards

  Urami

  --

  
  If you want to send me a message - DO NOT LAUGH at MY ADDRESS
  

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• button refresh Foxfire did not work when clicked on for the past two weeks

  button refresh Foxfire did not work when clicked on for the past two weeks

  Hi, see controls customize Firefox, buttons and toolbarsand click on restore default settings.

  If this does not help, Try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Craigslist 'Reply' and the buttons 'Add images' does not

  Until a few weeks ago, I used Firefox with no problem when browsing and posting Craigslist ads. Recently, the 'Reply' button in the messages does not at all. Nothing happens when I click it. When I write ads, the button 'Add images' does not save when I click it. I had to go back using Internet Explorer when using Craigslist. Help, please! (If it helps, I had to post this question in Internet Explorer, as the button "Question" on the page does not work in Firefox).

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes