Y570 TouchPad

Similar Questions

• Lenovo Ideapad Y570 Touchpad 'Tapping' question

  Hello

  I just bought ideapad y570 and its been fine, but after months of use it my touchpad does not work as it was before.

  I noticed that when I tap on it, it does not select anything on my computer. It moves and everything but when I try to choose anything, it does not.

  I already have FN + F6 and it did not work.

  How can I remedy this?

  Hello

  your synaptics touchpad driver is installed?

  If so, you must modify the settings for hardware-device manager and printers-mouse. After the opening of the properties of the mouse, go to the "Device settings" tab and click on settings. After that, you will need to open the "Tapping" page and enable it, if it is not enabled.

  If you do not have the driver installed, you can download from the link below and do the same things as above, if the problem persists. just chose the right operating system

  http://www.Synaptics.com/resources/drivers

• Problem Touchpad Y570.

  I discovered that the keyboard seems to replace the touchpad on my y570. If I have a key, the mouse does not move and then takes a second to answer so I left space on the key. I tried a USB mouse, and there is no problem. Any thoughts on what could be the cause and what can be done to remedy the situation?

  BTW, I just got the system and all drivers are in stock.

  There is a feature in Synaptics Touchpad called PalmCheck. To disable:

  Click Start > type "mouse" and select the first option. Click the device settings tab:

  

  Click settings. Expand tab Pointing and find Palm check:

  

  Click on the gear. Slide the bar completely to the left:

  

  Close and you should be good.

  This applies to all THE Ideapads too.

• Lenovo y570 - cannot use the touchpad scrolling

  After updating my drivers for the keyboard via the download ( http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_show_4458.html ), I am unable to use the functionality of scrolling on the touchpad. This could be the cause and is there a way to get back to an older driver if it is not possible to solve this problem?

  enable scrolling after re-installation.
  go to control panel > hardware and sound > mouse > device settings > settings > scrolling > allow

• Question of multitouch to y570

  Is anyone of you know if it is possible to configure our touchpads to press two finger would allow for example to open a new tab in a browser? My asus has these options... It also makes another action with press 3 finger that opens the menus and other... I was wondering if it is possible with the y570?

  I use the TouchPad setting for three-finger press.

  In fact, with Synaptics TouchPad Version 7.2, 15.3.31.1 driver version, they have a press 'three fingers' where you can choose an application to launch.

  

  DragonRider

• Touchpad issues?

  Recently, I have problems with the touchpad. I can't get the pointer arrow to go where I want it. When I do it, it moves all around and I can see it shake on the screen. I can't scroll upwards or downwards with my two fingers. When I try this, I'm split applications that are open. Any suggestions?

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

  Try a SMC reset. Article covers when necessary, but this will not affect anything.

  Reset the SMC

• Why my touchpad on MacPro unresponsive?

  Last week, I installed Mac OS Sierra on my MacPro. Since then, my touchpad is not responding, and system has slowed to snail PACE. Why?

  Occasionally an older battery start to fail and start to develop.  Which often interferes with the trackpad.  Open the MBP and inspect the battery.  If there is no sign of expansion, immediately remove that continues the expansion will seriously damage the MBP.

  Ciao.

• Touchpad cursor gets hard to control "woozy"

  Recently, I went back to using my Mac Pro 2009 after using a Macbook to the past two years for most. I upgraded to El Capitan first, and I decided to start a new account because I've been migrating the same account for 20 years. So all is cool enough for most.

  I had used a magic with the MacBook Pro touchpad because I hated the portable computers clean touchpad. Having become accustomed to the use of the touch pad, that I decided to use it with the Mac Pro. I use the touchpad, even for the last two years.

  Here's the problem: I have not yet identified which triggers it but what is happening is that the slider will frequently and suddenly become what I can only describe as 'under the weather', and I hope it makes sense. It becomes slow and its response and tends to overcompensate sometimes I have to be very careful and precise and slow in my movements when it's like that because if I use my hands the way I would normally be the cursor will overshoot.

  It does not have it for long periods of time, but he does not often. And it makes me a little nuts. Any ideas?

  Really?  No one has an answer here?  I'm going crazy... and now my stylus is dead, so I am forced to use the touchpad! (I can't use a mouse because of repetitive stress injury)

  If anyone has any ideas, please share!

• Touchpad not working not for a few seconds after I touch it with your finger, then a more...

  I already tried SMC and reset the PRAM, but who doesn't. I found someone with such a similar problem (Trackpad doesn't work sometimes on MBP after upgrade OS X 10.8.2)

  but the measures that seem to work for them do not work for me.

  Thus, as described in the title. the touchpad works very well as long as I just touching with a finger, so scrolling with two fingers or by changing desktop computers do not work. the mouse freezes for a few seconds after I hit with 2 fingers. After about 3 seconds it starts working again.

  If there is someone with the same problem let me know!

  Technical specification:

  OS X El Capitan 10.11.6

  MacBook Pro (retina, 15 inch, mid-2015)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Video card: Intel Pro Iris 1536 MB

  flash memory: 500 GB

  I propose a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• How can I disable "force the touchpad touch '?

  Theoretically, this terrible 'feature' is only available on the latest models of MBP... I opted for the mid-2012 13 "this time (I got a few Mbps) since this is the last model that still has the DVD player.

  SO there is no option 'force the click and haptic feedback' in my system preferences, BUT my GarageBand preferences for some reason any displays the option 'Enable touchpad touch force' with the GRAY-CHECKED box (which means that I can not turn the * @% & thing off)!

  I discovered its existence, while trying to understand why my GB kept popping up with a "feedback detection, turn monitor off? ' blurb that is so incredibly boring, because it appears when I even not record anything and even stranger than that is it pops up when I don't have even a 'live' or vocal instrument track in the air! So, when looking for how/where to address THIS issue, I came across the "Force Touch" thing (christ, the only words sounds like an assault or rape or something, I mean, right?); now I'm pretty sure that this thing is causing "feedback" notice pop up (, also keeps you prisoner until you do deal with it - yet another great added "characteristic", thank you very much oh no Apple brilliant makes this happen)... arrghhh!

  SOMEONE CAN ME SAY PLEASE HOW TO TURN OFF THAT AWFUL THING? I don't even know WHY it does not appear (I usually want to answered the 'why'), but I despise seriously this thing so I JUST WANT IT GONE! Please that there is someone out there reading this who knows how to achieve it - I'll be eternally grateful!  Thank you!!!

  Hello

  See if there is something you have not tried in this support article > using a Force - touch trackpad Apple supported

• Problem with keyboard and touchpad

  The problem in my MacBook Air was held. Keys of the keyboard do not work. The keyboard and touchpad are unresponsive. I'm not able to log in to my user account on Mac or type anything.

  I tried to change the system preferences: language & region, dictation, accessibility. It does not solve the problem.

  I connected the external keyboard and mouse connected via USB and they work fine. But the Mac keyboard and touchpad are still not respsond.

  Someone at - he ecountered the same problem? Any advice how to fix it please?

  Plug my Mac: MacBook Air (13 inch, mid 2013) OS X El Captain 10.11.6 (15G 31)

  Reset the SMC could solve the problem.

  Reset the management system (SCM) controller on your Mac - Apple Support

• The touchpad scrolling works on all applications (including IE) but not in Firefox - Win 10

  My touchpad scroll does not work in Firefox. It works great with IE and other applications (Windows 10).

  If it was a driver issue - I think that this would not work in all applications, but it works fine everywhere (except Firefox)

  I can operate for a short period, if I uninstall the Touchpad (in Device Manager), restart, re - installed.

  Again, hard to believe it would be a driver problem - works fine in all applications, except Firefox...

  He stares at me

  http://dellwindowsreinstallationguide.com/Dell-touchpad-drivers/

• touchpad do not work properly after installing 10.11.6 on macbook pro mid-2009

  The touchpad works perfect just before and after installation, I need to take the laptop to an Angel to have the touchpad working.

  Any ideas, anyone?

  The trackpad works normally in Mode safe? OS X El Capitan: start in safe mode

  If this isn't the case, I do not exclude the possibility of a hardware failure. The battery has problems?

• My touchpad is hole batteries

  My touchpad is holing of batteries every week. I use my computer in less than 12 hours per week. This seems odd. Y at - it a sleep track pad option that I don't know?

  http://www.lenashore.com/2012/06/trackpad-battery-life-getting-you-down/

  There is no way to 'sleep' your trackpad. But you can simplify your use of battery. (Two to four weeks until the replacement/refill is in the ballpark.)

  1. rely on rechargeable batteries - like those that accompany your trackpad.

  2. invest in a charger AA-, they are relatively cheap and reliable.

• the touchpad on the generation of apple tv 4 does not swipe

  Just unpacked my generation Apple tv 4 refurb.  I gave the remote control a short load before you try set up.  I was able to pair the remote control but the touchpad does not respond to the finger swipes. There is no way to make selections.  I was able to use my mini iPad to Setup wifi, apple store and iCloud.  When asked to allow location services there is no way to select my choice.  Also on the built-in keyboard I can click but not drag to select the letters.  Looks like a defective remote to me.  All opinions. ?

  Charge for about three hours. If the remote control is correctly associated with ATV, but the touchpad stil does not work, get it replaced.

  Apple TV User Guide - site https://help.apple.com/appletv/#/

  Apple TV User Guide - iBook https://itunes.apple.com/us/book/apple-tv-user-guide/id1050195582?mt=11