Y580 GTX 660 M is no longer detected?

Similar Questions

• Y580 GTX 660 m & HD 4000 supported Technologies?

  Hi again, I have another question on my new Y580 and his GTX 660 m. NVIDIA posted: support technology: 3D Vision, CUDA, DirectX 11, PhysX, Optimus, OpenCL, DirectCompute.

  When I open the GPU - Z (with my gtx 660 m running) on the bottom, I don't get the DirectCompute box checked, it's normal, I need to download something? Because I have checked on the HD 4000 despite what GPU is currently active.

  Thank you.

  I installed the beta geforce driver and now the box is checked.

• HP Pavilion p6-2102ed: MSI GeForce GTX 660 on my HP Pavilion p6-2102ed work?

  Hi all

  I have a HP Pavilion p6-2102ed with H-CUPERTINO2-H61-uA TX motherboard (Cupertino2).
  I would like to enhance it with a MSI GeForce GTX 660.
  Is the big question now: they both will work together?

  I already read something on the power supply. The video card requires a six-pin plug connected to a power supply, which is not the p6-2102ed.
  1: how to solve this? Do I have to buy an external power supply? If so, of what powersupply do you recommend? Or can I buy a cable (with six pins) and connect it to the power supply built in the p6-2102ed?

  2: I read the MSI GeForce GTX 660 measure 260 mm long. According to me, it will fit in the case. So it will not be the problem I think.

  3: the Bios will accept the new video card? Or what I need to adjust some settings in the Bios?

  Here are all the questions that I can think of right now.
  Please correct me if I wrote something wrong, and if you know the most important information, please tell me!

  Thank you for helping me.

  Hello

  The NVIDIA GTX 660 should work in your PC if it has not been flashed with a UEFI BIOS update. You will need to check with MSI on this situation.  I have an EVGA GTX 660 and I did the flash of UEFI to my graphics card.  Find out what the return policy is before you buy.

  The CX600 Corsair or CS650m would be an excellent choice for a diet.

  -------------------------------------

  BTW - The NVIDIA GTX 660 is a map of excellent graphics for HP PC that do not run a 8 BIOS version.

• Video card GeForce GTX 660 not detected by the motherboard Windows 7

  I recently upgraded my PC with an Asus z97 - a motherboard and processor Intel i5 4. After the reinstallation of Windows 7, I was able to get a signal from my video card 660 geforce gtx for a few hours. After Windows install several updates, however, I am unable to use my video card without receiving an ENTRY NOT FOUND both of my monitors. My video card is also not appearing in Manager devices, or BIOS and use rather Intel HD Graphics. Cause of the undetected video card, I am unable to install the latest drivers for my card and I have no idea what to try next. I also made sure my current diet provides enough power for the card. Is powered without a doubt the map because the fans spinning, I'm positive that I've attached all required power cables, and the card is inserted completely into the motherboard. I tried all PCI-E ports in my motherboard, but it continues to not display. I tried to install the drivers manually, but the video card should be detected before this is possible. Any help would be greatly appreciated.

  My specs:

  ASUS card mother Z97 - A

  Videocard GeForce GTX 660

  Intel i5 processor 4

  8 GB RAM

  700W ATX power supply

  I should point out that I have tried almost every technical troubleshooting that I have met, with the exception of disabling Intel HD Graphics. I fear that if, due to there not being any trace of my video card in the BIOS and Device Manager, if I disable this will also lose signal from the motherboard of DVI and HDMI, ports that are what I currently use.

  Hello

  As the graphics card is not detected by the motherboard, you will need to contact Asus for more help on this issue. You will need to check if the graphics card is detected in the BIOS or not, if not then contact the computer manufacturer is the right point of support.

  Support from Asus: http://www.support.asus.com/

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Change the GTX 660 stock cooler & fan on a H8-1151eo desktop PC

  Hello

  Just bought a PC desktop H8-1511eo a few days ago. Early on, the fan on the 660 GTX running notiably high speed and very noisy. Not noisy as broken, but as the * bleep * thing was trying to extinguish a fire

  Should the fan on the GTX speed automatically set according to the time GPU (29 C @ idle), or what? However, it seems that it is RPM max all the time (1700rmp - utility Speedfan). Downloaded the latest NVIDIA drivers (314). It did not help. It seems that the support of doenst motherboard the possibility to adjust the fan speed, or cela it locked from Bios or something?

  Any Bios Update on the h8-1151eo to control the fan speed?

  And anyway, I found a rather small (119 x 94 x 51 fan / w mm) VGA cooler (A r c t I c C o o l e r) 660 GTX. Only problem is that the maximum for the cooler 120W power dissipation and energy max is around 130W GTX 660. Do you think it will be a problem? I would buy the model more large (up to 200W), but I don't know if it can be inserted inside the Tower (136 x 138 x fan / w 51 mm). Is there a list of VGA coolers that fit in the case of ATX Mid of the h8-1511eo, or can you recommend one?

  -Thank you

  Hello

  It is the VBios on the video card in GTX660 that control the speed of the fan according to temperature changes, rather than the motherboard BIOS the Office.

  Is your PC of office still under warranty?  For the HP product warranty status check the web page.

  Your GTX video card maybe having problems. I suggest that you contact HP Total care and explain the problem.

  If your office is no longer under warranty, I recommend to replace the video card. Remove the cooler on a video card is not as simple as it is to do the same thing with a motherboard CPU cooler. The video cooler on the video card GTX660 may have replaced thermal interface or the VBios updated material.

  Erico-

• GTX 660 m and 3ds Max and Autocad 2013

  My y580 with the gtx 660 m does not allow 3ds max and autocad 2013 programs work.

  What is happening is that the program opens then application error and closes and it is with the card Nvidia be used in programs.

  However, I found workaround that said running applications with the intel HD 4000 instead. BUT what is the point to make that if you cannot take advantage of the GPU acceleration?

  Everyone knows about this problem?

  It was the latest nvidia driver causing the problem, that's what I condluded. I have returned my 295.55 default driver that came with the y580 and max and autocad works again.

• OptiPlex 7010 with Zotac GTX 660 Ti, no video output

  I have an Optiplex 7010.  I installed a PSU Corsair AX760i and have let it run for a week check that the upgrade has not created a new problem.

  Now, I am trying to install a Zotac GTX 660 Ti video card.  It seems that the new video card is recognized as the graphic edge generates a video signal is no longer, but there is also NO signal through connectors DVI 660 GTX.  I've checked the tension on 2 power connectors 6 pins for the video card and + 12v is here.  Any ideas?

  OK, I solved the problem.

  I had to modify the following parameters of the BIOS for the GTX 660 Ti Board to operate.

  General

  Advanced startup options

  X Enable Legacy Option ROM

  Secure boot

  Secure Boot Enable

  X disabled

  After making these two changes, the video card GTX 669 it works now.

  The video Commission works today, a new BIOS option appeared in which I allowed, as follows:

  Video

  Multi-display

  Enable multi-display x

  At this point, I have now loaded the drivers for the new graphics card and everything seems to not work as desired.

  I also noticed from another forum that he had questions about the "SERR Messages" BIOS option, it is ACTIVATED in my machine.

• Is there a small form GTX 660 or 760 map?

  Yesterday, I bought an EVGA GTX 660 graphics card to replace my existing GTX 460.  However, when I went to install it, it is so long that the back of the card cover SATA HDD on the motherboard connectors.  As far as I can tell, all the cards GeForce GTX 660 and 760 are 9.5 inches or more.  Someone who is 7.5 inches (the size of my current GTX 460) do?

  MSI GTX 760 ITX 2 GB Gaming comes in less than 7 "according to Newegg:

  http://www.Newegg.com/product/product.aspx?item=N82E16814127772

  Kind regards

  Jim

• Thunderbolt display is no longer detected

  I have a late 2013, MacBook Pro and a 27 inch Thunderbolt display, bought in September 2014. I use the screen without problems since then. But today the display is no longer detected. I got the MacBook disconnected from the screen, which has been briefly disconnected from the sector. (It was a power outage scheduled as it happens, but I don't see how that makes a difference).

  Now, when I connect display of the power of the lead part works fine but the screen does not illuminate. To the search, in the report of the system, the Thunderbolt Bus shows two Ports both with "no device connected". I have a Thunderbolt ethernet adapter and shows.

  I tried all the usual troubleshooting steps: disconnected power for a few minutes, resetting the NVRAM, reset SMC. A ran Diagnostics from Apple on the MacBook - all very good. I don't know what I can do. The Thunderbolt connector is slightly warm to the touch, which I think is always the case.

  Everyone you have other ideas please?

  Hey donnysp,

  If I understand correctly, the external display Thunderbolt is not recognized by MacBook Pro.  Looks like you already have a troubleshooting. I recommend you to read this article, it may be able to help solve the problem.
  
  

  Check the connections on your Mac and external screens:

  • If you use an Apple laptop computer, try to connect the AC adapter.
  • Make sure that the power cable from the external display is connected correctly and that your display is enabled.
  • If you are using a Mac Pro (end of 2013), make sure that your screens are plugged into the right ports.
  • If you use a hub of display, Cabinet or "KVM", try to connect the video cable from your screen directly to your Mac instead.
  • Unplug the video cable where it plugs into your Mac, then reconnect to reinsert the connection.
  • If you are using a video card, unplug the video adapter on your Mac, then reconnect to reinsert the connection.
  • If you use multiple video cards to connect your screen (the cards are "chained"), testing connection of the screen by using a single adapter if possible. Some video cards may not be linked together. For example, a mini DisplayPort to DVI adapter may not be connected to an adapter DVI to HDMI.
  • If your screen has more than one video connection, see if you are using another connection on the display works. If possible, check if you use a different view or a different adapter works.
  • Try using another cable that you know to be in working condition. Check with the manufacturer of the screen to make sure that you use the cable they recommend.

  Get help with graphical problems on external displays connected to your Mac.

  Thank you for using communities of Apple Support. Have a good.

• 'No Signal' - ti GTX 660 does not not with a card mother H-Joshua-H61-Μatx

  Hello

  I have a 2302eam HP pg with a 550w PSU ready to run a gtx 660 update ti GPU. However, I get only "no signal" on my monitor.

  As far as I know, with the power supply update, the PC should be end run the card.

  Is there a compatibility issue with my motherboard? Or is there something I can do to help solve this problem with my BIOS?

  I don't see any option in the current (and last v8) BIOS to disable the integrated graphics card and run the new GPU since the pci slot.

  What could cause this problem?

  Thanks in advance,

  Punchpidge

  Hello

  Have heard, if you have a UEFI Bios, you enter the BIOS, disable the boot safe boot and enable legacy in order to allow the new video card. All things being equal, it does no problem power supply.

  Don't know what OS you are using and did not find the model number you have indicated in your message.

  Finally, it should be to uninstall the existing video drivers, close, install the new card, then install the new drivers to restart managed in the operating system.

  Jaco

• Envy-m6-1125dx: in my computer hp laptop can I install a graphics nvidia gtx 660 m

  I want to, but a nvidia gtx 660 m or higher graphics card for my laptop so I can play games requiring a better graphics card and I was wondering if I could install in my laptop

  mgb8763 wrote:
  Is this motherboard: motherboard for laptop Asus G72GX Gaming 60-NYHMB1000-B01

  Hello

  Buy this machine. Simply cannot use Asus Board HP machine. Full stop and complete stop.

  Hope it makes sense.

• EVGA GeForce GTX 660 Ti

  I have a HP e9180t desktop computer and I'm looking to upgrade to an EVGA GeForce GTX 660 Ti. This video card is compatible with my desktop computer?

  Thank you

  Hello:

  Unless someone actually installed one in this model, it is difficult to say with certainty at 100%.

  However, based on the specifications of the PC should be, because the specifications state that the PC has a P/S 460W.

  Just check to make sure that food has two connectors 6-pin PCI Express (PCIe), because it is a requirement for the card.

  Paul

• Satellite L300-110 USB external hard drive is no longer detected

  I used my external hard drive via a USB connection for a while normally, I wanted to remove most of his files and only keep my important files. After I restarted my laptop it now is no longer detected

  My external hard drive model is HTS54101 0G9SA00
  Connected via a storage drive HARD Portable USB 2.0 Phillips

  The USB ports are ok, I plugged a USB optical mouse through them and it works, and sometimes the LED on the Phillips turns red with still no detection of my laptop.

  Please advise, I lost my mobile hard disk of 100 gega?

  Sounds like the hard drive has failed.

  The only thing I can think that you can try is to update your Chipset drivers. I don't know if this will fix the problem even if, as you have pointed out that the machine can detect other USB devices already.

• HP Envy 700-214 Compatiable with GeForce GTX 660

  Wondered if the NVIDIA GeForce GTX 660 was compatiable with my system.

  Hello

  The 660 NVIDIA should work. Review the items below.

  Guide to Seleting a discrete graphics card

  Computer does not start after the installation of a video (Windows 8) card

• After KitKat updated for HP Slate6 SD card is no longer detected by my programms

  Hello

  I was also forced to update my tab HP Slate 6 voice yesterday.

  After the complete procedure and restarting, my program is no longer detect the SD card!

  HP file manager said: "If von Lavaggio im Android OS kann der HP File Manager nicht mehr auf external applied schreiben" ("due to changes in the Android operating system, HP file Manager can no longer write to devices external storae").

  Please help solve the problem, my programs need to use external storage.

  I tried the following: I uninstalled one of my programs and reinstalled again, but the program still does not detect the SD card.

  I can't play music or listen to audiobooks more (via MortPlayer), cannot navigate with local stored map (via CoPilot - poor gps also).

  plS helP!

  Hey Slate6user,

  Here are the downloads of image for your Tablet: HP Slate 6 6000en VoiceTab drivers.

  As you can see there are a few different downloads. They vary by region in order to ensure that you select the correct version depending on the location, in that the tablet was bought.

  Restoration of good luck!