Y580 mSATA will work with 6 GB/s speed?

Hello

According to Y580 Manual:

SATA controller: serial ata, sata 6.0 GB/s, integrated into the chipset

As it is said, SATA interface can work with 6.0 GB/s, but mSATA can work with this speed too?

I need to know, because im afraid that I'll buy a 6.0 GB/s mSATA SSD and it works with 3.0 GB/s.

Thank you.

It will of course. The Msata slot is a sata3 (6 Gb/s) and the Bay 2.5 "is a sata 2 (3 Gb/s).

I have a Crucial M4 installed in Msata slot. It's the 256 GB model. He gets of the readings all about 450-500Mbs and writes at about half that speed. I noticed different benchmarks give results different tho.

Do not believe what the manufacturing, the speeds are, check with someone who actually put benched them.

Tags: Lenovo Notebooks

Similar Questions

  • InDesign CS5 will work with MacOS Sierra?

    Has anyone tried to see if InDesign CS5 will work with MacOS Sierra? I have creative cloud and CS5 on my machine, but due to some of the things that I have to work that only work with CS5 to CS6 I have to keep my old software. I hesitate to upgrade to Sierra until I know if InDesign CS5 will work or not.

    If anyone has tested this, I would be recognizing the return flow, thank you.

    It really depends what you do with it, and a large part of the framework has changes in the operating system for how the application is designed to run in. Your workflow can cause problems when the application works for others or you might be able to use it, but keep in mind has more no support for CS5 Adobe or Apple, so do not expect to solve any problems that you can discover.

  • It will work with former apple TVs remote?

    I just wanted to see if this new remote will work with previous Apple old tv. Anyone know? Thank you

    N ° the older Apple TV does not work with the new type of controller.

  • A Capsule of 1 TB will work with OS 10.11?

    Because I like to keep all my Apple hardware, I was looking at getting a Time Capsule backup to my new iMac comes with OS 10.11 (El Capitan). My question is this - can anyone tell me if an older model of 1 TB (MB277LL/A) will work with my setup?

    Thank you

    Carl

    This model was abandoned more than 7 years ago and is officially classified as "obsolete" by Apple, which means that if you have a problem and are willing to pay, Apple still will not help you with this device.

    Most of the 1st Gen Time Capsules failed in about 18 months. Few make it to 36, and very little done to 60 months, so unless the model you are looking at has a new power supply and new hard drive that was installed in recent years, it would be best to stay away from this model.

    If the product has not been updated with a new power supply and hard drive, it's almost a miracle if it does not work.

    Assuming that really fall into place, you will need to check to make sure that the time Capsule has firmware version 7.6.1 or later version to make it work with your Mac using El Capitan.

  • A HP Officejet H470wl will work with the MacBook Air

    A HP Officejet H470wl will work with the MacBook Air? The driver is still supported? I'll buy an Air.

    Hello..

    New Mac come with v10.11.x El Capitan pre installed.

    I checked for compatible drivers (software) for pinter them HP > http://support.hp.com/us-en/product/HP-Officejet-H470-Mobile-Printer-series/3434 453/model/3434454/document/c04510394 /

    Fact on the Mac, you would use Software Update to install the drivers according to the HP website.

    Printer and scanner software available for download for your Mac

  • This external modem will work with Satellite L500-1XL, running Windows 7

    Hello

    When in Spain, I need to use the dialing up to the internet through Telefónica.
    I guess that the L500-1XL is not an internal modem?

    This external modem will work with the L500-1XL running Windows 7?

    Thank you very much in advance for your help.

    A

    Hello

    You re right Satellite L500 doesn t have an internal modem, so you need an external.

    I think you can buy every modem that is compatible with Vista. Alternative ask your favorite computer dealer or authorized service provider

    A friend got good experience with USRobotics 56K modem like this:
    [USRobotics 56K USB Faxmodem USR5637 | http://www.amazon.co.uk/USRobotics-56K-USB-Faxmodem-USR5637/dp/B0019LZCEI/ref=sr_1_1?ie=UTF8&s=electronics&qid=1269253039&sr = 8-1]

  • I have a samsung saga that runs windows. Any chance firefox mobile will work with my device?

    I have a Samsung saga that works under windows. Any chance firefox mobile will work with my device?

    Mobile Firefox requires an Android phone.

  • Firefox 5 will work with XP SP3

    I am currently using Firefox 4 version 4.0.1
    Firefox 5 will work with XP SP3?

    The system requirements have not changed between Firefox 4 and 5, it will work on Windows XP

  • Windows 7 will work with a prossesser of intel?

    Hello, I have an old compaq presario 5500 with intel, Windows XP, 512 MB of ram and (60 gigs of memory) [after the chip market] for my disk 'E '. I was trying to read a downloaded MP4 video and I need windows7 to see. I downloaded a few universal support Windows Media Player and they also need Windows 7.   '7' will work with my camera? Thank you, oh people of the internet.

    Download and run the Windows 7 Upgrade Advisor to check if the hardware configuration of the system and software are compatible with Windows 7 or not. Here is the link to download:

    http://Windows.Microsoft.com/en-in/Windows/downloads/Upgrade-Advisor

  • HP Pavilion HPE h8-1214: GPU EVGA GTX 750TI will work with my HPE h8-1214

    Hello. I plan to update my graphics card soon. Accoring to this, I have a card Mother Angelica. I read another post here of a user having a h8-1230 with a card Mother Angelica Revision2 , who said the EVGA GTX 750TI was inconsistent with this Council, and that he should look for a version of the 750TI MSI instead.

    I was wondering if the same applies to my PC because my model is older that the other user has been. I prefer to use the EVGA GPU version, as it is cheaper than the MSI one, but I need to know if it will work with my computer. If not, will the labour card ASUS model, or should it be MSI? The map I intend to buy is present (EVGA) or this (ASUS).

    In addition to this, does anyone know if the stock fans and 300W power supply provided with this computer would be appropriate for the new card, or not? I'm looking forward already pass the power supply, but I don't know for the fans. If I were to upgrade the PSU, 430W would be enough, or should I go with 500W? Thank you.

    If anyone in the future who might wonder, I had this GPU works on my computer, but I had to buy a specific version of the map and the way I got it to work was pretty weird.

    You need to buy this version MSI of the card, because the card itself has a switch on to change the UEFI to Jack supported BIOS Legacy. As far as I know, other versions of this card are UEFI only, and this computer does not support UEFI, so he needs a card that can run in the traditional way. It may look like a fit snug in the case, but it does not seem to cause problems and it cools very well with fans.

    I also changed to a block of power SUPPLY Corsair 430W, which seems more than enough for the system, even with the card to load max. You could go to a higher power, if you consider the upgrade of several pieces, or reuse the power supply in a more powerful system later. I have not upgraded fans in the computer and do not seem to have cooling problems.

    Now to make it work...

    I had some questions:

    When I first turned on the computer, it froze on the screen of the POST (the first screen with the HP logo). It would allow me to get into the BIOS, and it would beep 4 times (with long breaks between the two), before finally to a black screen with a cursor blinking and just stay there.

    What finally got it to work:

    I disconnected all the instructors of the map (cables VGA, DVI or HDMI), and then I turned on the computer. Without any monitor plugged, the computer should beep 6 times (the power button LED flashing with it), then the power led turns off. The LED went off as soon as I plugged my monitor into the computer (in my case, I used a VGA cord).

    For the first few seconds, the screen remained blank and does not save a connection. The computer is beeping intermittently for a while, then after about a minute my detected monitor suddenly a signal, and the screen displays the Windows splash screen. I was able to boot into Windows, all right, even if the resolution of the screen will be a little goofy, until you install the drivers.

    I jumped in the driver installation CD, and once it finished installing, I restarted the computer. Now, when it restarted, I had to do the same procedure I mentioned above so that he could start again. Now that the drivers are installed, I don't know if I'll have to do this procedure everytime I restart the computer (don't have not shut down since then), but since I rarely shut down my computer, it's worth it to me.

    Hope this helps someone else, because I know that I spent 10 hours searching for ideas before discovering this solution myself.

    Now that it is running, I have problems and I have run several graphics intensive games on it without any problem with cooling or power draw. It is very quiet, too. Even with a game running on high quality graphics, I can barely hear the fans when there is no other sound in the room.

  • Will 1st gen magic mouse will work with the new Mac Mini?

    #1

    I'm going to buy a new Mac Mini and one of the options is to add a second magical mouse of gen. I have a first gen magic mouse. I guess this first mouse magic gen will work with the new Mac Mini, but I want to check.

    The old mouse Apple and any other generic pc mouse will work fine with the Mac Mini.

  • Adobe Photoshop CS3 will work with El Capitan?

    Adobe Photoshop CS3 will work with El Capitan? I am considering getting a new Imac (OS of my current Imac is 10.6.8) and do not want to get involved with a monthly term using Photoshop.

    No, it won't.

  • T500 Will work with 62P 4551 Mini Doc

    We replace a number of T40s with T500s. The Docs of Mini 62P 4551 we use with the T40s will work with the T500s and if so, are there restrictions?

    Thanks - I thought that this might be the case.

  • What internal DVD +/-RW will work with my Satellite P10-304

    Can someone give me an answer to what internal DVD +/-RW will work with my Satellite P10-304.

    I said a CSD-6012 or DVD +/-RW UJ-820 might work.

    Help, please

    Thank you

    Lee

    Hello

    Have you checked the manual of the Satellite P10?
    Sometimes, compatible CD/DVD players are in the user manual that must be installed on your laptop.
    If you n t have the user manual, then you can download from the Toshiba page.

    However, if you don't get the right info in the user's manual then I would recommend contacting the ASP in your country for details.
    Usually, you can order a player taken in charge of these guys here.

    It is important that you know which drives are compatible because of the different master\slave\c-salt settings.

    Bye and good luck

  • Can I buy Itunes cards on a trip overseas (Hong Kong), they will work with my account in Switzerland?

    Can I buy Itunes cards on a trip overseas (Hong Kong), they will work with my account in Switzerland?

    All iTunes gift cards (and gifts) is specific to each country - you will only be able to Exchange and use a gift card from Hong Kong on a Hong Kong iTunes account (and while in Hong Kong, you can use the store in Hong Kong, the Bank of Switzerland cannot be used when you are back in Switzerland)

Maybe you are looking for