Y580 Turbo Boost does not work except if hooked up

Similar Questions

• X 230-Turbo Boost does not work when there is only the AC

  I changed the power manager in the State of Performance Max, but when he has only AC, Turbo Boost does not work. I need to install the battary simultaneously to do the Turbo Boost. If there is only battary, Turbo Boost can function normally.

  I googled this problem and it is said that Lenovo is doing this in order to avoid the lack of power when there is AC only.  How could I do Turbo Boost only works with AC (without battary on)?

  "evening.

  Welcome to the community!

  There are here some information that suggests that a 90 Watt power adapter will allow what you want, but I am mobile at the moment so my research capabilities are limited. Personally, I can't confirm that it works, however, I've never run without battery.

  Kind regards.

• Turbo boost does not work when active hyperthreading - W520

  I have ignored this issue for a long time, until I've decided to try to understand and fix it. My W520 would never go beyond 2.40 GHz, I tried all the tests in the book. Manager power AC power, BIOS enabled, the max value performance in what concerns all, power settings windows too. stress tests, single thread, multi-threaded, has no importance, it has always been to 2.40 GHz or less (800 idling). After much trial and error, I found that this turbo would work properly if hyperthreading is disabled in the BIOS. The CPU module and then between 800 MHz to 3.5 GHz as it should with active turbo. Why can I not use hyperthreading AND turbo? Is this normal?

  I also noticed that in the BIOS there is no option for turbo-boost. Just hyperthreading, multi-core and speedstep.

  W520, i7-2760qm, BIOS 1.40, all the latest recommended updates.

  
  

• Y580 background winds does not work correctly... help!

  Hi all, I just got my new Y580 a week ago. I use HWMonitor to check the internal temperature. The highest ever record temperature is 81 c for the CPU (where the game). I think it's high enough, think that I have the laptop high about 3 inches off the table and my room is quite cold (it's winter here). So I checked to see if the low 3 vents are working properly. I think that the bottom venting air draws in to cool the Interior. So if I use a small piece of paper, he should stick to the passage because it is sucking air. The piece of paper only stick to the upper vent (the one near the ventilation hole on the side of the laptop), but not the bottom 2. Also, the upper vent feels kind of cold to the touch after extended use, which make sense, because it is sucking air. However, the lower 2 events feel the same and feel a little warm. This thread believe me the 2 vents below even does not work properly.

  
  

• Inspiron 5520 with i7 3632QM - Turbo Boost does not

  Hello, I have an Inspiron 5520 who originally i3 2370 Mr. I upgraded the CPU to i7 3632QM and it works perfectly, but I discovered that Turbo Boost is not activate during labor. This is the diagnosis of HWinfo:

  

  As you can see, it shows that the Turbo Boost is not enabled. And my tests, I can definitely say that the CPU's maximum speed is rated - 2, 2 GHz without any still on the rise according to the specifications of Turbo.

  Also, I tried to install the Intel Turbo Boost monitor utility, but it gave an error saying that it cannot find CPU with Turbo Boost support. But the 3632QM says of course.

  BIOS settings have not all Turbo Boost options so it can be turned on/off from there. The version of the BIOS is available last A14.

  Why Turbo cannot be enabled on this laptop? And I saw that many other people with different computers cannot do as well. It's so unfortunate and unfair. :( How can I enable it? You are looking for your help please.

  Problem solved, I loaded a [security] default BIOS settings. Turbo Boost now works normally. Looks like it was necessary for the motherboard/BIOS card recalibrate after replacing the CPU.

  

  

  

  

• HP Envy 17 P # F1J39AV: Turbo Boost does not activate

  Hi all

  It's simple, my computer is not activate turbo boost pressure, already checked BIOS and it shows same here (she also has more grayed out)

  is my current BIOS: BIOS Version/Date Insyde F.63, 06/10/2014

  Someone help me please.

  updated the driver for integrated graphics, I don't know if it's because or in the processor, but if worked. Thanks for everything here.

  Who have contributed to the issue of Turbo Boost, always check how overclock.

• HP SimplePass does not work except the windows log on screen

  Hey,.

  When I bought this pc, it is Windows 8. I've updated my pc to the latest version 8.1 of windows. After the first update SimplePass stopped working on all browsers except Internet Explorer. He stopped work on the login screen too. But for some reason he started working on the newspaper on the screen all of a sudden. I contacted HP through chat support. They said that SimplePass is designed to work only with Internet Explorer. Other browsers may work or not. It is very good. According to his (Agent HP) SimplePass still works.

  But after the SimplePass update stopped working completely except the login screen. I click on the icon SimplePass... no answer... I slip on the fingerprint reader... nothing happens. But the computer only works on the windows login screen. Below is my current pc info. I think that HP must update SimplePass.

  Operating system: Windows 8.1 64 bit (version 6.3, 9600) (9600.winblue_gdr.140330 - 1035)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  System model: HP ENVY 15 notebook PC
  BIOS: F.56
  Processor: Intel Core i7-4700MQ CPU @ 2.40 GHz (8 CPUs), ~2.4GHz
  Memory: RAM 8192MB
  Available OS memory: 8124MB RAM
  Page file: 2859MB used, 6544 MB of available space

  Sharif Tamim

  Hello Sharif_Tamim,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not able to operate SimplePass properly, and I'd be happy to help you in this case!

  The most recent version for SimplePass can be downloaded to your system by following this link: updated HP SimplePass Identity Protection Software .

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Turbo Boost does not X 201 without battery

  Hello...

  I have a X 201 Tablet with Core i7 640 cpu

  When I deattach the battery, the Turbo is disabled and my labtop works on minimum speed!

  I've updated powermanger and this is the latest (6.32)

  Please advise me

  Best regards

  Alex

  Hi Nicollo and welcome to the Lenovo user community!

  It is by design - you have the power to the system removed part. A higher power supply adapter can eliminate this problem.

  http://forums.Lenovo.com/T5/welcome-FAQs-knowledge-base/should-I-run-with-my-battery-in-or-out/Ta-p/...

  I hope this helps!

• HTML does not work except in Internet Ex; Plorer

  
  I am new to Dreamweaver and have implemented the beginnings of a site using the model and the files: www.kojonupworking.com.au
  This site presents the texts of the navigation bar in Internet Explorer but not in Firefox or Netscape, and I can't work out why. Can someone give me some ideas?

  cudles wrote:
  >
  > I am new to Dreamweaver and have implemented the beginnings of a site, using
  > model and the files: www.kojonupworking.com.au
  > This site shows the texts of the navigation bar in Internet Explorer, but not in
  > Firefox or Netscape, and I cannot work out why. Can someone give me some ideas?
  >

  Your #navleft and #mainarea layers are positioned so that they hide
  the navigation bar. You can see this by canging the high placement of the page on
  each 300px instead of 200px.

  You have a table top why not just use a simple 2 column table
  inserted under it to house your nav and the main content?

  The problem with the use of layers is that they are positioned absolutely and
  only take into account everything that is resized on the page.

  {#navleft}
  position: absolute;
  left: 0px;
  top: 200px;
  Width: 225px;
  background-color: #FFFF99;
  layer-background-color: #FFFFFF;
  border: 1px none #000000;
  z index: 4;
  height: 650px;
  }
  {#mainarea}
  position: absolute;
  left: 225px;
  top: 200px;
  Width: 775px;
  height: 650px;
  background-color: #ffff99;
  layer-background-color: #FFFFFF;
  border: 1px none #000000;
  z-index: 5;
  }

• Laptop battery does not work except if connected to the charger

  Original title: laptop battery

  recently, I replaced my laptop battery, why it wont work without having the charger NVI

  The battery may be defective.  The connections inside the laptop is the battery may be defective.  The charger is maybe defective.  None of them can easily be diagnosed with tools home and would require a reputable repair shop and/or certified to check.

• G580 turbo thrust does'nt work

  Hello

  I have the i5 processor - 3210 m, but turbo boost does not work.

  I can't find any options turbo boost in the bios.

  What can I do?

  Thank you

  
  

• The function in my Satellite C660 key does not work

  The function in my Toshiba Satellite C660 key does not work except volume.
  This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(

  Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.

  Remove the preinstalled version, restart your computer and install the latest version.
  After doing this it works again.

• Output TV does not work properly with my new Satellite A100-812

  Hey everybody,
  A little, I have a problem with my new laptop if not satisfactory.
  The only thing that does not work (except some progs) in Vista is out of my tv.

  After many hours spent trawling the net, I came across different solutions, but none worked.
  The A100-812 has a geforce Go7600 who has taken TV svhs.
  First, I tried to connect to my tv through my old cinch cable. It took me 2 days before I gave up and bought a new svhs cable. Cable that works now and after a hell of a lot of attachment,

  I finally have a working tv. Except that its black and white. I used the click right-> NVIDIA Control Panel and changed the signal. I live in the Netherlands, where B/PAL is the standard. But even in trying all the different types of signals I don't get any color.

  Someone else has had this problem and solved? I downloaded the nvidia latestet drivers and I'm desperate, I bought the laptop to make it work!
  Any suggestion is more than welcome.
  See you soon,.
  Retriever

  Hello

  the problem is that the nvidia drivers are still not final. I have an A100 and desktop system and two systems have problems with tv output. It s Yes, probably a clear driver problem.
  After many surveys, I found many comments in the forum of nvidia, where users are desperate and angry about this issue.
  Thus, the only choice is to change XP up to what nvidia will release some drivers work... that s my way.

  Cheers to a disappointed user nvidia

• IPhone 6s - microphone does not work on all applications except camera and calls

  Hey, I don't know exactly know what happened with my phone. Suddenly, my microphone work on LINE, Whatsapp and almost all other applications that use mic. Except, camera and when someone call me on my number.

  But it does not work on whatsapp and LINE calls. And it also does not work when I snapchat. Only works on the default camera Apps and call through my number.

  I tried:

  -restart my phone

  -hard reset and blink? Reset with the power and the "home" button.

  -read the micro support page. Still no solution.

  TL; Dr:

  my microphone does not work on every apps on my phone except calls through number and approx. of default camera it gives you just that silence when I play it on voice notes. But it works when I record yourself using videos on the default camera app.

  Hello Bllacke,

  Thank you for using communities of Apple Support.

  I see from your post, some applications have a problem to access your Microphone. I know how it is important to ensure that your applications have access to the Microphone and can use this feature. I have a few things I want to try.

  First, tap Settings on your iPhone and then scroll to the last section that lists your apps. Select the applications that use the microphone and make sure that the Microphone is activated (green).

  Then, follow the steps in the article below to close these applications:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then, test the microphone in these applications again and see if it works.

  Best regards.

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------