Y70 battery is connected but does not load only 61%

I have a brand new Lenovo Y70 8.1 Windows running and the battery is plugged in but does not exceed 61%.

It is said: 61% available (olugged, to the do not load).

I; ve looked several times under Power Options, but I don't see any settings anywhere.

All Updats of Windows have been installed and the update of Lenovo says it is too.

Anyone know what is happening?

Thanks, I found this in the application of "Lenovo settings" under "energy Manager".

Tags: Lenovo Notebooks

Similar Questions

  • Sansa Fuze connects, but does not load and does not appear on my computer.

    Hello everyone.

    I have a 4 Gb Sansa Fuze, which is (of course) out of warranty.  I have been enjoying his music for quite awhile and have had absolutely no problems with it until two days ago, when it ran out of battery.  I left it in my car and the next day went to connect via the USB port on my computer.  The sansa has begun with its typical "splash screen" reading "Sandisk Sansa, followed shortly after by a blue moving the ring and the words 'Connected', followed by about a second later"writing", followed by a second. later 'connected'  This is normal for my fuze (that I know).  However, the problem with the logo of the battery in the bottom right of the screen, which normally indicates a small "lightning bolt" next to the battery and it shows the battery 'filler '.  Now it shows only a white empty battery.  There is no bolt of lightning, and there is no charge to the battery.

    I have tried to consider the sansa as a device via "My Computer" and sync in Windows Media Player.  None of them show that I have nothing connected.  The sansa updater doesn't recognize not my rocket is connected.

    I know for a fact that the USB loader is not faulty, as I also have a second Sansa Fuze that connects perfectly and was purchased at the same time.  I don't think that it is the slot USB itself that I changed the port to all others and still did not have a change in the status of my sansa (broken).

    If it helps is that I connect to the computer:

    HP Pavilion m7580n

    AMD Athlon 64 X 2 processor Dual Core 4400 +

    2 GB DDR2 RAM 1.8 GHz

    Windows XP Media Center Edition SP2

    Thanks in advance for any help that can be given...

    also, I would like to apologize if this has already been discussed (I read until my eyes hurt and couldn't find something similar).

    Thanks again,

    Josh

    UPDATE:

    Apparently the good things come to those who wait (and leave that their Sansa rockets connected for days despite the hopes of oinitial n it will load).  Today I woke up and found that my Sansa Fuze, which previously were not load had miraculously blamed himself.  I have unfortunately no idea as to the reason that he works all of a sudden.

    Thanks for your help anyway!  It is good to know that there is a place to come when your Sansa is broken...

    Thanks again,

    Josh

  • You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

    You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

    I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

    Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

  • Software for printer C410 starts but does not load.

    Software for printer C410 starts but does not load.  Using Windows 7 Home Premium SP1 on a Pavilion HPE-140f. Click on install and the process starts, goes in all the scans and the two notations. When I click on load it just goes dead and will not charge.

    Try to run the installation once more

    Once to reach the license not agree, click on the link 2 (use of connection Internet

    Make sure that both options are defined as no, thank you, approve and proceed with the installation

    You see no progress

    If the same appears, please specify whar you are which means by "going dead" - is there a specific error message?

    Specify as detailed as possible, a screenshot can help to understand better as well.

  • Updated my iPhone6 to ios10 and now my battery heats up and does not load

    Updated my iPhone6 to ios10 and now my battery heats up and does not load

    I have never experienced this with another iPhone or iOS version

    Of course, it's a problem because I use my phone all day

    What troubleshooting steps have been taken so far?

    Have you completed a reboot, reset or restore such as recommended by Apple?

    Best,

    GDG

  • Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy whatever it is ov

    Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy anything on the internet. Clues?

    This has happened

    A few times a week

    Is a few weeks ago

    Your UserAgent string in Firefox is totally messed up by another program that you have installed and Barclays does not know you use Firefox 3.6.6 - it is probably similar to IE 6.0 on this site.
    http://en.Wikipedia.org/wiki/USER_AGENT

    type of topic: config in the URL bar and press ENTER.
    If you see the warning, you can confirm that you want to access this page.
    Filter = general.useragent.
    Preferences are "BOLD", a line at a time, and then select reset, right click
    Then restart Firefox

  • Pavillian a6710t said "Enter Setup", but does not load

    It is the Client machine.

    Pavilion a6710t on Logo screen, says 'enter the Setup... ". ", but does not load.   Done all the usual diagnosis on the startup HARD drive. He received a certificate of good health.

    Done all the usual steps in the diagnosis "Windows will not load.

    Any help here is greatly appreciated.  Thanks in advance!

    Well, you could... but maybe the kind of spendy for a PCthat more than 3 years. I think about buying a new and I could remove the drive and see if I could read it as a second drive in the new PC - to try to recover your files out of it. If you want to continue the repair, here is a page of repair HP site that has a list of authorized service providers: http://www8.hp.com/us/en/store-finder/find.do?bs=SR4&type=authorized

  • rpet installed iOS app "charged hydrated: application" but does not load

    Hello

    I installed my phonegap build app on my iPad.  rpet installed iOS app "charged hydrated: application" but does not load.  Keep saying please wait on the black screen.

    Any ideas of how to debug this problem?

    Thank you!

    First, find out if it's a problem of hydration.

    Turn off moisture, rebuild and install, then launch the application. It remains only to display and clear the screen?

    BTW: Be aware that configuration changes are ignored as long as hydration is activated during the generation.

  • When a sample plugin based, but does not load

    Is there some common reasons why a plugin of the sample (in this case, CS6, Mac OS X 10.11, Xcode 7) will build without problems but does not load in Illustrator? In this case, I am a student in MultiArrowTool, but it will not load. I have not found any place where I can set a breakpoint to see where it fails, so it seems that AI CS6 rejects before even any code. At first I thought she might need a separate UI installed, but none was provided with the sample project. Any suggestions would be much appreciated!

    Have you tried to put a breakpoint in PluginMain in Main.cpp? If the plugin fails silently, it is normally because this function returns an error code when it receives the startup message.

  • When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.

    When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.

    Please go to the location of your Lightroom Catalog, and there you will see the folder for Lightroom Catalog Previews.Lrdata

  • When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

    When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

    OSstatus = error-37

    Note that this a Mac operating system error.

    http://forums.CreativeCOW.NET/thread/145/865447

    Error when importing the file: slash or other character in file name

    http://forums.Adobe.com/message/3729601

    The build error: slash or other character in file name

    http://forums.CreativeCOW.NET/thread/145/868994

    The build error: complete startup disk

  • iPod is on battery low, now dead but does not load

    my ipod was on low battery and now it is dead, but it does not load, what do I do?

    It is possible that the battery must be replaced.

    Make an appointment at the Genius Bar

    If you can't go to an Apple Store, look for an authorized service provider > Apple - find

  • 60% (plugged in, load) but does not load

    I have a Lenovo y510p, and it does not load 60%.

    It is said he is in charge, but it doesn't. My battery is 'maximum autonomy' in energy management.

    When I change for the health of the battery "optimized" it says plugged in, does not support.

    I searched for this topic, but couldn't find anything. Help me 100% load.

    I solved my problem thanks to Lenovo!

    for those who wondered how I did I Power Manager installation, and it solved.

  • Vista recognizes the printer but does not load the drivers - error 0x000003eb

    Have even tried to load drivers generic, just to see if it works, no chance.  I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.

    Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.

    Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue).  I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista.  Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.

    I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us.  It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me.  You really need to discuss this with HP and I don't know that they will have you place and operate at any time.  I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation).  If you do the research and read relevant articles, I am sure that you can do.  No, Vista makes it as easy as XP, but it can still be done.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • X 1-charger (Kensington Absolutepower) detected but does not load

    Recently I bought a Kensington Absolutepower (http://www.kensington.com/kensington/en/gb/s/1717/absolute-power.aspx) as a replacement for the charger standard 65w which was delivered with my X 1.

    It seems to be compatible with other laptops Lenovo model X, and Lenovo are listed as a mark of support, but when it is plugged the X 1 does not load. The charger is recognized, (the familiar sound of the beep and the green light next to the laptop input lights upward when it is plugged) but does not not the battery. The machine is designed for the correct voltage setting, and all the Lenovo firmware is up to date. Someone at - it any suggestions or experience with this combination of product before I return the charger?

    Hello

    According to the following link: http://www.kensington.com/kensington/en/gb/p/1440/K38080EU/absolutepower%e2%84%a2-laptop-phone-table... the X 1 model is not compatible with the absolute Kennsington power adapter.

    Here is a list of the compatible models of the X series:

    X100e 3508 of X100e-2876 (L) (L) X 200 (L) X 200 Tablet X200s (L) (L) X200s (L) X 60 (L) X 60 compressed X60s (L) (L) X 61 (L) X 61 Tablet X61s (L) (L) X 201 (L) X 201 Tablet X201s (L) (L) X 300 (L) X 301 (L) X 301 (L)

Maybe you are looking for

  • Groove: Because of media rights, this song can be played on this unit

    This is the error message. I've seen other posts with her remain unanswered. Help, please. I have an Android. Love Groove music. Don't want to have to go somewhere else. I reinstalled and rebooted several times. I also deleted all the application dat

  • downloaded updates of files can I delete the installation packages to free up disk space

    After having been to the bass and installed, can I delete the installation packages to free up disk spaceand how?

  • Failed installing Windows XP Pro.

    I am doing a new installation after erasing my hard drive. I downloaded and created the Windows XP installation diskettes (6) for installation from floppy to boot from my XP Pro CD is not bootable.  Began installing Windows from the 6 floppies, place

  • overlap of column FreeCell

    My freecell opens with a layered column.  It seems that the 1st column is at the front and between the 2nd and 3rd columns. When you click on one of the columns under the overlay column it will be put forward and overlap the other columns. This only

  • Dell now offers Server 2012 on the NX400

    Today we received our NX400 with Server 2008 Standard Version.  I went online to look at its configuration and noticed that Server 2012 is now available for the same price, ARRG!   I have not plugged yet. What Miss me?  Should I request an upgrade?