Yahoo mail and other small sites print and can not adjust. This is not true with the Explorer

When I open my yahoo home page printing is of normal size and can be adjusted. In yahoo mail, printing is tiny and I can't fix. Some websites in my favorites also opens in the small print and cannot be adjusted. If I use explore I have none of these problems. I have tried everything I can think and not luck.

Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

You can use an extension to set a page zoom and the size of the default font on the web pages.

Tags: Firefox

Similar Questions

  • Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

    Hi all

    I tried to apply the patch from Jan 2016 to the Weblogic Server that runs the RMS Application.

    The version of the Weblogic Server is 10.3.6

    The version of RMS App is 13.2.6

    While applying the patch that has a PATCH-LIST of S8C2 on the Weblogic Server, I encountered the following error:

    [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

    Checking for conflicts...

    Detected A - conflict to solve and run the installation of the patch again

    Conflict condition details below:

    Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

    After reading the forums, I followed the suggestion to delete the previous patch: EJUW and who has obtained successfully removed as shown below, when I tried to install the Patch Jan complained conflict ZLNA patch and when trying to remove the ZLNA encountered unrecognized patch ID patch: ZLNA.

    [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = EJUW-prod_dir = $WLS_HOME/wlserver_10.3

    Checking for conflicts...

    No conflict detected

    Removal of the Patch ID: EJUW...

    Result: success

    [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

    Checking for conflicts...

    Detected A - conflict to solve and run the installation of the patch again

    Conflict condition details below:

    Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA

    [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = ZLNA-prod_dir = $WLS_HOME/wlserver_10.3

    Encountered unrecognized patch ID: ZLNA

    Any suggestions how to solve and apply the fix successfully Jan would be useful.

    Thank you.

    Hello

    Can you please set the download directory of the fix for MW_HOME/utils/bsu/cache_dir/with the help of Smart updated interface and test again.

    To designate a directory to download the hotfix, follow these steps:

    Start the smart update.

    On the Smart Update main window, choose file > Preferences.

    The Preferences dialog box appears.

    In the section Patch download directory of the Preferences dialog box, specify the path to the download patch directory.

    https://docs.Oracle.com/CD/E14759_01/doc.32/e14143/start.htm

    Thank you

    Aishwarya

  • my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

    Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

    Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

    Step 1

    VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

    Step 2

    When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

    /Library/LaunchDaemons

    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

    A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

    There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

    Step 3

    In the LaunchDaemons folder, there may be one or more files with the name of this form:

    com Apple.something.plist

    When something is a random string, without the letters, different in each case.

    Note that the name consists of four words separated by dots. Typical examples are:

    com Apple.builins.plist

    com Apple.cereng.plist

    com Apple.nysgar.plist

    There may be one or more items with a name of the form:

    com.something.plist

    Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

    These names consist of three words separated by dots. Typical examples are:

    com.semifasciaUpd.plist

    com.ubuiling.plist

    Sometimes there are items (usually not more than one) with the name of this form:

    com.something .net - preferences.plist

    This name consists of four words (the third hyphen) separated by periods. Typical example:

    com.jangly .net - preferences.plist

    Drag all items in the basket. You may be prompted for administrator login password.

    Restart the computer and empty the trash.

    Examples of legitimate files located in the same folder:

    com.apple.FinalCutServer.fcsvr_ldsd.plist

    com Apple.Installer.osmessagetracing.plist

    com Apple.Qmaster.qmasterd.plist

    com Apple.aelwriter.plist

    com Apple.SERVERD.plist

    com Tether.plist

    The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

    Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

    If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

    If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

    Step 4

    Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

    ▹ Safari preferences... ▹ General

    and click on

    Set on the current Page

    If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

    The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

    Step 5

    The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

    Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

    Step 6

    This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

  • After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

    After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

    Yes, no extra accommodation payment is required. After editing your site and savings, click download file to the host of VTT... The info should auto fill with the same information that you used to download the site the first time. You can choose to download only files "changed" or "all files". Click OK and the old files will be overwritten.

  • Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

    Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • I'm using Firefox Portable and lack the 'Extra' _Menue been updated to Version 11. And "No, I can not add with the toolbar customization."

    I am using Firefox Portable and lack the menu "Extra"since updated to Version 11. And "No, I can not add with the toolbar customization."

    What is this extra menu?

    In some languages of the menu Tools is called Extra, so you can watch in this menu to see if you can find what you are looking for.

  • I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

    I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

    Hello WillieBouma1,

    You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

    I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

    See the following article:
     
    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

    Make sure your network connection is working and properly configured.

    You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
     
    In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
     
    1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
     
    2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
     
    3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
     
    4. Select "Network adapters" under common hardware types, and then click Next.
     
    5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
     
    6. click Next and follow the remaining instructions.

  • in applications, the loading mark keeps appearing and can not complete downloading the trial of Photoshop and Dreamweaver.

    in applications, the loading mark keeps appearing and can not complete downloading the trial of Photoshop and Dreamweaver.

    Please read https://forums.adobe.com/thread/1499014

    -try some steps such as changing browsers and disable your firewall

    -also clear the cache of your browser if you start with a fresh browser

    -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

    https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

    http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  • I have installed and uninstalled SP6 from a CD and the CC PS repeatedly today and can not get either the version of the function.

    I have installed and uninstalled SP6 from a CD and the CC PS repeatedly today and can not get either the version of the function. I get the following messages: could not load actions because an unexpected end of file was encountered could not initialize Photoshop because an unexpected end of file was encountered could not initialize Photoshop because the preferences file was invalid (it has been deleted). I should have a clean install of programs. I tried one at a time in case they are somehow interfere between them.

    Try to run Photoshop and immediately press on and hold the keys Ctrl + Alt + Shift Windows CMD + Option_Shift Mac. Photoshop invite and ask you want to your preferences removed. Answer Yes.

  • Can not communicate with the server, BUT I CAN CONNECT SUCCESS TO "MANAGE SITES"

    I do NOT see the server in dw cs6 files, so I can't download or not communicate with the server, BUT I CAN CONNECT to SUCCESS OF "MANAGE SITES"... EH WELL THERE WHERE THE PROBLEM?

    dw-conn-error-page1.jpg

    dw-conn-error-page2.jpg

    In the view of the file context menu, click Remote Server

  • I reinstalled Windows Vista and can not reactivate with my key now... What do I do?

    Hello. I own a copy of Windows Vista Ultimate x 64.  It's the Builder pack and I used this license for 2 other computers I built bringing the total number of machines to 3 that it runs currently on.

    My question is this... I did a clean install on my PC twice since the original version, and now I can't reactivate Windows, what should I do?

    I don't have anything in the original documentation that came with the program which provides a limit to how many times this key could be used to register Windows.

    Any help with this is greatly appreciated... Windows expires today if I can't find a way to activate it :(

    If it's a plain OEM version is good for 1 activation, there is "Generator of Packs" as similar to Amazon I post that are good for 3 activations: http://www.amazon.com/Microsoft-Windows-Ultimate-32-bit-Builders/dp/B000LP5EMS

    How to activate Windows 7 or Vista manually (activate by phone)
    http://support.Microsoft.com/kb/950929/en-us

    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone * do not select/press any option * and wait for a person to help you.
    (6) explain your problem clearly to the support person.
    (7) the person must give you a confirmation ID, copy it down on paper,
    (8) check that the ID is correct in reading the support person.
    (9) to enter the ID number, then click 'Next' to complete the activation process.

    Activation and registration of a Microsoft product
    http://support.Microsoft.com/?kbid=326851
    Windows activation: (888) 571-2048
    (888) 725-1047 or 800-936-5700

    ----------------------------  Alternatives -------------------------------------

    To enable the use of the phone

    1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
    then by clicking on activate Windows now. ?

    2. click on show me other ways to activate.

    3 type your Windows 7 product key, and then click Next.

    4. click on use the automated telephone and then click Next.
    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    5. click on the location nearest you from the drop-down list, and then click Next.

    6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

    7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

    8 Note the confirmation ID the phone system gives you.

    9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

    10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

    How to contact a Microsoft Product Activation Center by phone
    http://support.Microsoft.com/kb/950929

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    J W Stuart: http://www.pagestart.com

  • I have a xp edition version 2002 family and can not connect to the internet, is it possible to download updates on a different computer to a usb port and transfer updates

    Please could you help me that I am not the most until no one date when irt comes to this. my daughter has a windows xp version 2002 and I can't connect to internet, I know that the computer is dated but I'd like to update the computer, is it possible to download the updates on your part on my computer and transfer bu using a USB

    Hello

    The short answer is almost certainly yes.

    In order to better inform that we will need information from you...

    What is the brand, the range and the model of your PC (or card mother brand and model if a custom build)?

    What service pack are you in?

    • Hold down the Windows (between Ctrl and Alt) key and press Pause break
    • Examine what is listed in the system: section on your service pack level

    Is there any device listed in Device Manager problem?

    • Click Start
    • Click on run
    • Type devmgmt.msc and press enter
    • Search for devices in "Other devices" and devices marked with exclamation point (!) and let us know what they are

    Furthermore, we are not Microsoft, just a collection of individuals from all over the world who can help people like you solve their PC problems.

    Tricky

  • Error message: the application has failed to start because its side-by-side configuration is incorrect and can not enter in the email and save records

    I get a message that says that the application has failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details.   I used this link to email for 2 years and NOW I can't in my email and all my saved folders.

    Hi KathyHendges,

    1. What mail client do you use?

    Step 1:

    You can try clicking with the right button on the link and select run as administrator and check.

    Step 2:

    This error code can occur due to corrupted Microsoft Visual c++ installation.

    To resolve this problem, you can install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:

    Download and install Microsoft visual C++ from the below mentioned link:

    Package redistributable Microsoft Visual C++ 2010 (x 86)

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84&displaylang=en

    Package redistributable Microsoft Visual C++ 2010 (x 64)

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

    For more information, you can consult the following link:

    http://blogs.msdn.com/b/developingfordynamicsgp/archive/2010/08/20/side-by-side-configuration-is-incorrect-error-message-given-launching-Dynamics-GP.aspx

    Hope this information is useful.

  • Connect to the result of local wireless only router and can not go to the internet

    My fujitsu laptop (Windows Vista) to connect to the router wireless home successfully during a month and suddenly 'local only' and cannot access the internet. force wireless is strong and my other laptop with Window XP connect to the internet successfully with the same router.

    And my laptop can connect to the internet using the wifi system in my school without any problems.

    Please help to restore my laptop to the internet via my wireless router.

    Thank you!

    Geofg,

    I have a similar problem after the most recent update of Windows. My IPv4 network properties manually configured outside the range of the DHCP from my router. This is so that I do not receive IP addresses different natted attributed to my computer.

    After the update of Windows, the IP address of the GATEWAY is cleared after each restart of the operating system.

    If you use the manual IP settings, check to see if this can happen to you.

    HTH!

Maybe you are looking for

  • my right click menu does not work

    When I right click on a link, the menu that appears is huge and contains all the options! However, when I click on 'Open link in a new tab', nothing happens. Any advice?

  • Satellite A350 - chain owner of material utility

    Toshiba offers a clever native freeware for its Satellite A350 material utility called series. Several BIOS settings can be changed / set here without going too much into the good BIOS!). One of these settings is the abilty to set the password for th

  • Satellite A100-386: no internet access after the new XP installation

    Hi everyvody! I can do it myself, so I ask for your help! I have a Toshiba Satellite A100-386 with windows XP MCE. I recently had a virus, so I formatted my drive. I don't have the installation CD with me, so I install XP.I have two disc on my comput

  • UCS C200 and NIC Teaming/FailOver

    As UCS C200 with management of a 10/100 and 10/100/two interface 1000 interfaces and PCIe with 4NIC I want to install CUCM 8.5 is the NIC Teaming/failover supported by UCS C200 and how to set up the NIC Managment interface with failover? Thank you.

  • Pavilion M9350f: To add a USB card internal but do not recognize the type of connector: S

    What type of card connector that is on the motherboard? It's certainly not PCI so I can't shop for a card USB 4 - port that I want to install in my machine. Any recommended sources/suppliers would be appreciated. Thank you!