Yahoo mail does not connect to the server on one of my accounts

Yahoo mail does not connect to internet

Advertisement

Hello Curt,.

Thank you for asking your question here in Apple Support communities. Seems that Yahoo does not connect on your iPhone 6s. I understand not email how important is for everything these days. I will try to suggest a few things you can do to test one we hope to get this up and ongoing run as you expect.

The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

Once your data is safe, try under Troubleshooting in this Apple support article: get help with Mail on iPhone, iPad and iPod touch.

If you have any question, you may want to try this reset: If your iPhone, iPad or iPod touch connects to a Wi-Fi network. Use the section titled still not 'connect?' and follow the steps to reset the network settings. This brings the network settings to factory default. Then, you can try your email.

If your Yahoo email account is an IMAP account, you can check the settings here: Apple Mail search parameters, then you can delete the account and set up again. This article should help you with that. Follow the steps described in the article, but remove account, then you can add the account of the rest of the instructions. Set up an e-mail account on your iPad, iPhone or iPod touch.

Thanks again and have a great day.

Tags: iPhone

Similar Questions

  • Thunderbird does not connect with the server

    Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

    Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

  • Thunderbird does not connect to the server after update to 24.4. How can I fix it?

    TBird updated today V24.4 on my desktop and now it does not connect to the server. I have V23.4 on my lap top and it works fine. Someone at - he had this problem and figured out how to fix it?

    Please check your anti-virus software.
    He may have detected a change and decided to not allow Thunderbird. He could therefore block Thunderbird.

  • You cannot be activated because the iPad does not connect to the server

    You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

    What is the wording accurate and complete error message?

    If she says the activation server cannot be reached/contacted

    There are 4 possible causes for this error message:

    1] activation server is actually down. Very rare and of short duration when it

    Sometimes. Solution - try again.

    [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

    temporarily disable your firewall and/or antivirus software, up to the end of the activation.

    [3] computer used for activation has been used to jailbreak an iOS device in the past.

    Solution - use another computer.

    [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

    the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

    prohibited.

  • Application does not connect to the server using WAP2.0

    Hello

    I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0

           if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT))
            {
                    //WAP 2.0
                String uid = null;
                ServiceBook sb = ServiceBook.getSB();
                ServiceRecord[] records = sb.findRecordsByCid("WPTCP");
                for (int i = 0; i < records.length; i++) {
                    if (records[i].isValid() && !records[i].isDisabled()) {
                        if (records[i].getUid() != null &&
                            records[i].getUid().length() != 0) {
                            if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) &&
                                (records[i].getUid().toLowerCase().indexOf("wifi") == -1) &&
                                (records[i].getUid().toLowerCase().indexOf("mms") == -1)   ) {
                                uid = records[i].getUid();
                                break;
                            }
                        }
                    }
                }
    
                if(uid!=null)
                {
                    if(AppConfigurations.DEBUG)
                        System.out.println("Connected using direct WAP2.0....");
                    return ";ConnectionUID="+uid;
                }
            }
    

    I am same ConnectionUID as present in this complete book in Options in the device.

    Even application does not connect to the server using WAP2.0.

    Let me know what other things should I check to make application to connect to the server using WAP2.0.

    My phone is BB 8900 and OS 4.6.1

    WAP connection will pass through the gateway of the carrier.  This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you.  Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.

  • photosmart HP b210a more does not connect to the server.

    I installed this new printer a few days ago and it works wireless laptop problem, phone and pad. So now all of a sudden I can't print wireless. The printer says does not connect to the server if the wireless works. The wireless working on my computer too. Repeatedly, I installed the installer hp for Lion, I installed the drivers from HP on the Apple site.

    Technical specification:

    iMac running Lion

    Mac Book under Snow Leopard

    iPad

    iPhone 3 g

    AT & T Uverse router

    Thanks to anyone who can help!

    The router rebooted, reinstalled again and it seems to work? Don't know what went wrong.

  • Dreamweaver (on Windows 7) does not connect to the server, IIS (v7) using "FTP over SSL/TLS...". »

    I am weather evauating to buy Dreamweaver CS6...

    Trial of Dreamweaver CS6 (on Windows 7) does not connect to the IIS server (v7) using "FTP over SSL/TLS (explicit encryption).  I have a NEW Godaddy SSL certificate installed on the IIS server.

    On the connection between States Dreamweaver: "server certificate expired or contains invalid data."connectionerror.png

    I tried:

    -ALL Dreamweaver Server configuration options

    -L' use of multiple certificates (I tried 2048 and 4096-bit Godaddy SSL certificates)

    -Make sure the certificate "issued to the"domain name is my domain name. "

    I am able to connect without a problem with Filezilla, Filezilla equivalent affecting 'explicitly require FTP over TLS.  I can connect both using Microsoft Expression web.

    This has been discussed previously. I recommend reading my old thread for details:

    http://forums.Adobe.com/thread/889530

    But to make a long story short, Godaddy is incorrectly signed SSL certificates on shared servers.  The servers/ips/domains and the certificate do not match.  So DW and many other tools fail authenticate with Godaddy SSL connections.  Some users have stated that other tools FTP, such as Filezilla as you mentioned, bypass and automatically change your connection to insecurity, but DW is very picky.  Once you modify encryption against zero, the connection will be accepted.  Best solution is if you want a certificate SSL correctly signed move to another host because Godaddy refuses to admit that they are wrong with SSL certificates on their sites.  These warnings will appear also to your users if you have a store saying the SSL certificate does not match the domain/ip and this can make users checking in a very nervous showcase.

  • I have IE6. I need to install service pack 1 Windows XP. I can download it, but I can't install it because it does not connect to the server. How can I work around this problem?

    I recently had to use the restore disc that came with my computer. Accordingly, I now have Internet Explorer 6. To switch to IE7 or IE8, I need to reinstall the Service Packs. I can download them, but I can not install them because I have IE6 and downloads could not connect to the server. How can I fix?

    Hi wildcar

    You can go directly to Windows XP SP3 . Download and install it from the link below.

    Windows XP SP3.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

    Ignore the text that says: it is only intended for Professional computer and network facilities.

    Important note: If your system has an AMD processor, download them and install Microsoft windows update utility for the processors not intel from the link below, before you install Windows XP SP3.

    Update for Windows XP (KB953356)

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=23751

    After you are done you can try to install ie8 again, if it has not already been offered through windows update.

  • Unable to send message AT &amp; T - does not connect to the server. Anyone else having this problem?

    All of a sudden I can't send messages on my AT & T account. I get a message that Thunderbird cannot connect to the server (SMTP). Called at & T and they checked all the settings. I can access my email account on Apple Mail and Yahoo (AT & T email provider), and yet I can not send messages on Thunderbird. I can receive but not send.

    I tried deleting the account and the recovery, but that has not helped. Does anyone else have this problem?

    Christ1,

    Thanks for the tips.

    Even set up a new account did not work. Despite AT & you s claim that it was not a problem with their servers and taking me through a number of measures to ensure what was the origin of the problem, he as magically disappeared as soon he came a few hours after all the machinations. So, still do not know what caused it, but it disappeared.

  • iPad does not connect to the server

    Kind of, it looks like my iPad has disappeared and twisted his tail (connection) and got lost somewhere in cyberspace.

    Yesterday morning he opens to the screen Hello > Slide Set up who brought up the screen 'could not activate iPad' with the message "your iPad could not be activated because the activation server is not reachable. Try to connect the iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support".

    This condition actually began three days when it does not connect to my Airport wireless internet and I could not he deleted.  I made the troubleshooting on the dome using Airport utility that showed connections to the top and the green. My main computer is not affected. I was able to put a return by making a total system power off for a few minutes and then turned on one at a time with the modem (cable) beginning (all equipment - computers, iPad, modem and airport), then the airport, my main computer (2003 iMac screen all-in-one flat) then the dome of the iMac. They are all restored correctly at full speed. At the point where I was interested only in the dome as I was doing some work on it using Classic applications and did not activate the iPad until the most late in the evening.

    I was wondering what is happening and if there is an inexpensive way to get it running again?

    Sparkgapper

    p.s. There is an Apple Store here in El Paso, if it's a long drive where I live.

    If you have problems with the applications of stalling or crashing,

    double click on the "home" button

    -slide up on applications to force leave their

    Re-boot ipad.

    Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

    https://support.Apple.com/en-us/HT201559

    Force power down if above give it trouble you.

    At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

    more information on the re-start:

    http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

    This these tips from MichelPM to improve performance:

    https://discussions.Apple.com/message/29504169#29504169

    https://discussions.Apple.com/message/29504311#29504311

    Restore factory settings by loading the latest version of the ios that will support your machine:

    (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

    https://support.Apple.com/en-us/HT203977

    (2) three methods of restoration of your ipad.  [simple as abc]

    2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

    http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

    2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

    http://support.Apple.com/en-us/HT201263

    3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

    http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

  • Dynamic binding will not be rendered, does not connect to the server, CC 2014, 2015 CC

    Hi all

    I tried to contact Adobe support on this issue, but after spending 50 minutes trying to explain to the rep what dynamic link, the cat no longer works, so I am posting this here!

    I'm on a Macbook Pro 2013, OS X 10.10.5 2.4 ghz + 16 GB of RAM and I run out of problems with links dynamics in CC 2014 and 2015 (both fully updated) - it is important to note that it has never worked properly , but in the past a few reboots, revision or import the model in a different way has finally worked.

    In recent weeks, whenever I try to make a model in Media Encoder, it fails to connect to the server of dynamic links - this happens when you add to the queue of EI (it adds the comp, but won't connect, once I hit rendering) or when you import directly from Media Encoder (sometimes he manages to read the project add the model file and then fails to connect).  The error log says "cannot read from source, it can be moved etc.".

    I tried the following:

    Pass all plugins (I don't have that some installed Trapcode plugins and a couple of old plugins of the trial) of '... common library' for the plugin in the application folder.

    Clear cache of AE and me.

    Disable the firewall.

    Test with very basic compositions.

    Reset me.

    Nothing works and make the files without loss of EI (10-200 GB) becomes impractical and blocks until the AE for hours - nobody knows what might help others to reinstall everything (very slow internet connection, could take days).

    I doubt that it is connected, but I also have license issues major since the move to the country and therefore duty cancel my subscription and re-subscribe with a new account (different username etc..).  Half the time the apps that I use (AE, first, Illustrator and Photoshop) will not open, responsible for account Adobe comes constantly, opening and closing. Normally signing off CC and removing the OPM.db file works, but not always.  Need me an average of 20 to 30 minutes to open any application Adobe, and sometimes they just do not open at all.

    I am incredibly frustrated to spend more time trying to AE to work I work in an AE - I don't want to not scream (Why oh why oh why adobe!) to you folk, but I feel like a fool to pay each month for software which opens at all, or that does not work when it does.  I should mention that on my iMac more recent (2015), with exactly the same applications and plugins (but who never had my old account on it) everything works pretty well as it should.

    Suggestions (apart from those you can find forums to research - I tried all MS) would be much appreciated!

    Updated - I think I've fixed it (either by the way it took me ages to find this post, because someone had moved without letting me know, I got so stuck in a loop of browser redirection, as Adobe had allowed me to change my username to that already in use.)  I'm not fan No. 1 Adobe this morning...).

    Three things I tried, one of the last 2 must have worked.

    1. I checked the host file, it was empty, but apparently rogue adobe references often cause this problem.

    2. I checked my installation in the creative menu cloud language - it was strangely grayed out, so I confirmed language than English, this could well have caused the problem that I've used French as the language of installation (I work in English, but teaching in French...).

    3. I think that this might have been what solved the problem - I renamed the folder SLCache (Support HD-Library-Application Adobe) in SLCache.old (effectively removing) then restarted the computer.

    Now the questions link license and dynamic seem to have disappeared, Dynamic Link is very slow, but it has always been.

  • HP Deskjet Ink Advantage 3525 does not connect to the server

    Hi guys, I am exhausted after a week of trying to solve the problem. I am printing and scanning over wifi without problem, but there is no way to activate the print server (ePrint). The printer screen (and also Web page) explains this printer could not connect to the internet. I tried to reinstall, open ports on the router (WRT54GL) and millions of other web solutions. I don't have a proxy on my home network. Someone has solved this problem, please?

    Hello

    Try to set a manual DNS and check if that can help you.

    Just follow the same steps as shown below from the HP Deskjet Ink Advantage 3525 software:

    http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-6520-scan-to-email-connection-problem/m-p/2549789/highlight/true#M58522

    Shlomi

  • BRAVIA internet video link does not connect to the server

    I have a KDL-32xbr6 (Yes, it has a DMEX button on the remote control). Just buy a DMX - NV1. Connection is "by the book". The wireless bridge is a NetGear 3001 bought a month ago. This Wireless Bridge works fine when connected to a computer and has no trouble at all a link to my 4G version jetpack. This device has abundant speed and is used by other Bravia owners to access the internet. Yet, when it is connected to the DMX - NV1, the system cannot connect to the 'server' (some server that can be). I spent about 4 hours, spread over 3 days exceeding this ad nauseum with the online chat. And we continue to go right on the same things over and over again. DMX has so much power and network illumintated lights green. When accessing the network, the Green Network flashing. So, it IS out in the network. But after the timeout, it always comes with a message "configuration failed due to the delay" on the TV screen. (Which is exactly what it says - I don't remember the exact job right now). Instrumentation in settiings presents the new appropriate icons (internet video settings, etc.). So that part is OK. I did a system reset several times on television and DMX. I did the cold repowering (unplug, wait a minute, reconnect) of all devices several times. I even tried to delete the security on the router/modem encryption and went 'none' for a test, just in case there was some sort of encryption confusion. The system seems to be absolutely spot on, but when we try to make his connection to the 'server' it can do. And don't suggest even trying out an online software update, you must first be able to connect to 'server '. Has anyone experience this problem? It is quite a haruumpher. Driving me crazy. I'm sure it's something simple. But what is it? Thanks in advance for any help in this matter.

    Can you please answer back with the MAC address of the DMX - NV1. I would need to check the activity of the unit to try to find out what's wrong.

    Thank you.

  • CC update stops at 2%. Network does not connect to the server from Adobe. What can I do?

    Hi guys,.

    I have a big problem to update my CC cloud. It stops at 2% and I don't really know what to do. It is really urgent, and I hope someone is able to solve my problem.

    Artur

    Hello

    Please see cloud creative app: updated installation: stuck at 2% Message 'tries to connect to the server'

    Hope that helps!

    Kind regards

    Sheena

  • try to download cc desktop application, but it does not connect to the server.

    I tried several times now to re - download creative Cloud, but I get to the loading dialog box and it crashes saying "trying to connect to the server. What's wrong? I have a secure internet connection.

    Ashlette21 for more information on how to resolve the error of connection please see sign, activation or connection errors. CS5.5 and later.  We invite you to update this discussion if you have any questions about the steps listed in the document.

Maybe you are looking for

  • How to export a cam multi clip

    Hi, I want to save, or rather a multi-cam clip that I created and attach it to the rest of my export venture. Is this possible? When I do the usual way of export, which is share > export, it won't let me. Help? Troy

  • Add printer to dock

    How can I add my HP Color LaserJet M277dw MFP to my Dock? The HP utility won't let me scan to a folder, so I must do upon entering the system preferences > printers and Scanners can perform the analytical work. How can I add printers and scanners to

  • I want to use the expression editor control in a DLL VC ++ how?

    Hello as mentioned I want to use the expression editor control in my DLL written with VSC ++ 2005 MFC. But I came across some problems: If I simply add the ExpressionEdit control in the toolbar to my dialog box then the dialog box will appear not dur

  • System was a dell, but everything has been changed. Should recovery/repair disc what I do?

    Original title: I need to run recovery on my xp I need to run a recovery/repair on my family computer for my windows xp cd, but all I can find is a for a dell xp home recovery disk. My computer was originally from dell, but we changed rooms (motherbo

  • Error loading resource DLL

    At startup I get an error when loading resource DLL - if I check on the battery, I get "error loading c:/Progra~1/tHINKpAD/uTILIT~/pWRMGRV.OCX