Yellow exclamation mark in device - Portege M100 Manager

Similar Questions

• Satellite P200D-12f - two yellow exclamation mark in device Windows 7 Manager

  Hello!

  I have a 12f pspbqe toshiba p200d and I installed win 7 on it.

  everything works great but I have two yellow problems in Device Manager. can't get rid of them. I installed the thing u suggested and it work: S

  help please :)

  a device is unknown and the other is the mass storage device

  Hello

  It would be interesting to know what you have installed yet things.
  In addition, you should check the vendor and device ID in Device Manager to identify the device.

  I know for mass storage controller, you must install the Intel Storage Manager.

• Code 31 Plug and Play software Drive enumerator no yellow exclamation mark in Device Manager

  Hello, hope you can help.  XP sp3 Microsoft PNP driver 5.1.2600.0 streamci.dll and pilot 5.3.2600.5512 swenum.sys ESS Maestro 3i Audio Driver 5.12.01.1174.  No sound anywhere.  No sound Windows logon. Yellow exclamation mark in device next to the PNP manager.  In Device Manager, I try to update Pilot PNP and a dialog box ' device does not work because windows cannot load the drivers required for this device. Code 31. "I recently installed a new 256 MB RAM memory.  With the previous installed card 128 MB total RAM memory is now 386 mb.  My system runs faster.  I also bought a drive hard outside with the error "this device is not configured correctly code 1" let Microsoft FIXNOW or I tried a Hdwe installation with an error ' continues could destabilize your system ", I installed anyway.  Hdwe installation of HARD drive included a generic Volume with the same error.  I continued anyway.

  I tried for hours of internet research.  Can you help me?

  You have Windows XP posted a group of win7?

  You need to reinstall / update your drivers for chipset motherboard, either from your PC manufacturers site if a big name PC fixed or portable, if a generic desktop computer, from your motherboard manufacturer.

  Your external problem * may be cured by the chipset driver

• Satellite A60-S1591ST: yellow exclamation marks in Device Manager

  Hello

  Recently I formatted C: and installed XP Professional. But after installation, there are several problems.

  First of all, in Device Manager, there are large yellow markings at the SM BUS controller, video controller (VGA Compatible).

  How can I solve them?

  Secondly, when I scroll to the bottom of the sidebar screen to read or see some content down in a certain site, my screen is so sensitive and vague simultaneously with movement or the slamming of the scroll bar. It is associated with above features?

  My laptop is Toshiba Satellite A60-S1591ST, XP pro with SP2

  I do not know how to identify the model of motherboard

  Thanks in advance.

  Hello

  The problem can be solved very quickly the yellow exclamation point appears in the Device Manager, because you didn't install the necessary drivers.

  If you now ask for the driver ;) page Am I wrong?

  Well, it's a Toshiba laptop that so I think ;)
  See this page:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  Choose the Satellite A60-S1591ST and you should get all the drivers.

  Concerning

• Code 31 Plug-and-Play software enumerator driver has a yellow exclamation point in Device Manager

  Hello, hope you can help.  XP sp3 Microsoft PNP driver 5.1.2600.0 streamci.dll and pilot 5.3.2600.5512 swenum.sys ESS Maestro 3i Audio Driver 5.12.01.1174.  No sound anywhere.  No sound Windows logon. Yellow exclamation mark in device next to the PNP manager.  In Device Manager, I try to update Pilot PNP and a dialog box ' device does not work because windows cannot load the drivers required for this device. Code 31. "I recently installed a new 256 MB RAM memory.  With the previous installed card 128 MB total RAM memory is now 386 mb.  My system runs faster.  I also bought a drive hard outside with the error "this device is not configured correctly code 1" let Microsoft FIXNOW or I tried a Hdwe installation with an error ' continues could destabilize your system ", I installed anyway.  Hdwe installation of HARD drive included a generic Volume with the same error.  I continued anyway.

  I tried for hours of internet research.  Can you help me

  PS. thought I had a chipset intel on this dell c600.  went intel.com and ran an intel driver update utility program to find what I had drivers.  Results: Intel Chipset Software installation utility (Inf chipset) product detect: no current Version: None

  Hi jojojangle,

  According to the support Web site Dell C600 is only supported in Windows 2000. You can check the link below:http://support.dell.com/support/downloads/devices.aspx?c=us&cs=555&l=en&s=biz&osl=en&SystemID=LAT_PNT_P3C_C600&os=WNT5

  You can try to make back the driver and check if it helps. See the link for the procedure below:

  How to roll back a device driver:http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/driverrollback.mspx

  For reference: explanation of error codes generated by Device Manager in Windows XP Professional:http://support.microsoft.com/kb/310123

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The Device Manager has yellow exclamation on other devices.

  The Device Manager has yellow exclamation on other devices. Peripheral unknown bus controller universal series (usb) 1) 2 SM bus controller) 3). No driver installed. No driver found on driver updates. Not causing no problem but I don't know what could be the devices.

  Thia article gives some indications - http://techforcommoners.blogspot.co.uk/2009/10/how-to-identify-unknown-devices-in.html its worth a read to see if it helps.

  Basically, it starts by looking for the hardware id in Device Manager and it enter the PCIDatabase to see if it can find all matches. It is sometimes useful in such cases.

  Another place to look is 'information system' (enter 'system info' (without the quotes) as the research) and look in there for pointers, esp in "components - peripheral problem."

• My wireless printer has a yellow exclamation point in devices and printers. How to fix?

  My printer (HP Photosmart c4500) wireless has a feature wireless and when I use my desktop pc (Win7 Ultimate - x 64) to connect it shows a yellow exclamation mark for troubleshooting. When I run the troubleshooting it will prompt you to install the last pilot and fails to do so. So I tried to download the software from the manufacturer and install the drivers in this way but unfortunately I have another error:

  «Windows cannot install HP Photosmart C4500 print driver kernel mode series.»
  To obtain a driver that is compatible with the version of Windows that you are using, contact the manufacturer. »

  Although I have tested on a laptop nearby and had no problem.

  Hello

  Have you made changes on the computer before this problem?
  
  
  Method 1:
  
  Try the steps in the following Microsoft article and check if it helps.
  
  Printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows
  
  
  Method 2:
  
  Try these steps and see if it helps.

  a. click the start menu > run > type gpedit.msc
  b. under Local computer policy, double-click Computer Configuration.
  c. double-click Administrative Templates, and then double-click Printers.
  d. right-click on Disallow installation of printers using kernel-mode drivers and then click Properties.
  e. on the setting tab, click disabled, and then click OK.

  
  
  Method 3:

  I suggest to uninstall and download and reinstall the printer driver and software from the manufacturing site and check if it helps.

  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3757817&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3575173

• I use a Belkin USB wireless adapter. In Device Manager, I see this same adapter listed several times... with a yellow exclamation mark over it. However, an entry for this card will not have any problems indicated and work well.

  I think that whenever this USB adapter is removed and reinstalled, the system is seen as a new USB device.  However, if I try to uninstall the list in Device Manager showing a yellow exclamation point, the system will not... I get a message saying "Uninstall failed...". This device may be required for the system startup.
  Suggestion?

  Hello Fgibson1911,

  Thank you for your message.  All of these entries stay after you restart your computer?  In addition, what happens when you search for new hardware?  Try this and let us know the result.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on Device Manager.
  Right click on "Network adapters", and select "search the hardware changes.
  The "Yellow!" entries disappear?
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro A120-145: yellow typical mark in Device Manager

  Hi all

  I have a Satellite Pro A120-145 running Win Xp Pro fully patched and updated, I have a yellow typical marks against "serial" in non-plug-and-play in Device Manager (when I click on view devices).

  Could someone tell me what driver is needed for this? I don't want to use the recovery disc I made a custom Setup to get rid of the excess baggage which is included on the disc.

  Thanks in advance.

  I used advanced search forum and found that Toshiba post document in some discussions of the forum.
  Please read this:
  How to identify an unknown device in Device Manager?
  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Then, you can visit the page of the Toshiba driver and may download the driver for the unknown device.

• Satellite L300 - ODD has exclamation mark in Device Manager

  Please could someone help me with my Satellite L300 laptop?
  It has a pre-installed Pioneer DVD - RW drive, but in Device Manager it has exclamation mark and not show as a CD player and DVD player.

  I tried for days to find the right drivers but no success, it displays as: PIONEER DVD - RW DVRKD08A ATA Device in Device Manager, I am unable to watch DVD s, thank you.

  Remove the device from the list and restart your laptop.
  The problem again?

  What operating system do you use?
  You use your laptop to factory settings?

• Yellow question mark on devices in Device Manager

  Original title: Please help. In Device Manager / other devices/Multimedia Audio Controller, there is a yellow question mark. What is this please?

  In the devices under other devices, the multimedia audio controller Manager, there is a yellow question mark. What is this please?
  Everything seems to work as far as I know. Thank you very much. Afzal.

  Hi amal.
   
  A question mark '? ' in Device Manager means that a compatible driver for this device is installed, indicating the possibility that all the features are not available.
   
  This article provides steps that you can use to troubleshoot hardware configuration by using the Device Manager.
   
  For more information, see:

  Troubleshooting of conflict of devices with Device Manager

   

  Also, see this article for additional troubleshooting steps:
  How to manage devices in Windows XP

• Satellite A100 good question - point yellow question mark in Device Manager

  I have a Satellite A100, model PSAANC - 3605C. I reloaded Windows XP Professional on this subject recently, and now I am unable to get any sound (it worked before reloading). If I choose Start, accessories, entertainment, Volume, it tells me that there is no active mixers available. I tried to reload the chipset and different audio drivers, including the UAA driver, still no luck.

  In addition, in my device manager I have a PCI device that shows as not available (point), and I'm unable to load a driver for him. What Miss me? How can I get my sound back?

  Kinderfolk

  > I recently rebooted Windows XP Professional on this topic, and now I am unable to get any sound (it worked before reloading)

  Hey mate I got exactly the same problem after installing Win XP.
  I could solve it.

  I updated Windows XP to the State. I installed SP3 because this package contains the necessary corrective measures.

  Important: The SP3 must be installed before the sound driver!
  If you have installed the audio driver, you must first remove it! This can be done in Device Manager

  I did it and it worked.

• My Chromebook (acer C710) was fine, but now shows a yellow exclamation mark with the chrome of message

  OS is missing or damaged please insert a recovery key (which I don't have) any suggestions please?

  any suggestions please?

  I managed to make a recovery from the internet disc and tried. It worked. He even kept my files. If anyone has this problem, I'll be happy to help you.

• I have a yellow exclamation mark on my wireless and signal when I diagnose the problem that Windows says 'the DNS server does not. Can anyone help?

  I have our computer server set to a static ip address, because our printers work on the network. Every time I try to connect to the internet Windows tells me "the DNS server is not responding. Can someone help me?

  It is a forum for specific consumers. You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

• Can I run product recovery with a yellow mark on Device Manager?

  It was suggested that my CD/DVD-rom has been infected by the virus. There is a yellow exclamation mark shown against the CD-rom. I would like to reinstall my laptop (Equuim) by running again the Toshiba product recovery. It is possible with the CD/DVD-rom does not work? Please notify.

  Optical drive may not work under Vista or other operating system preinstalled, but has nothing to do with the General features.
  Yes, you can do it. When you start your laptop press F12, put the recovery media in the optical disc drive, choose the CD/DVD drive in the list and press ENTER. When the recovery procedure starts just follow the menu on the screen.

  * Recovery procedure will remove all data from the HARD drive. So, if you have some important data stored on the HARD drive please make backup before starting the recovery procedure.*