Yes, said "some files needed to accurately preview this page have been changed but not saved." Save now? "(Was: Question about possible...)"

Similar Questions

• Some plugins required by this page have been blocked for your protection.

  I get this error after you install a lower version of Firefox in addition to the current version of Firefox. I have since then removed the old version of firefox and reinstalled the current. There's no matter what I do. YouTube keeps warning me that I have to update flash player (even if most of the videos work there).

  Here are some facts:

  My flash player is up to date, has been removed and reinstalled.
  Shockwave has been removed and reinstalled.
  Old version of Firefox has been removed.
  Current Firefox has been reinstalled and is up to date.
  I get "some plugins required by this page have been blocked for your protection." on each page with flash player on.
  Pages do not display flash objects, nor is there anything to place them - they're invisible, empty space.
  Flash drive works fine in IE, no error messages.
  When I check for updates of the addon, no addon is listed as obsolete.
  These are my addons: http://i.imgur.com/HJEaGmz.png

  Why I always get this message? How can I fix it?

  Thanks in advance

  Hey, I checked the help > troubleshooting information once again and saw that there is a "Reset Firefox" button... ». I used that and it seems to have solved the problem!

• the files required for Windows to run correctly have been replaced by unrecognized versions

  Get this message: "files required for Windows to run correctly have been replaced by unrecognized versions.
  I have no problems with my computer.

  What happens here?  Should I take any action?  If Yes, what?

  Hi AZK11,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  Description of the Windows File Protection feature

  http://support.Microsoft.com/kb/222193

  Hope the helps of information.

• When I edit a .wav file (noise reduction to remove the background hiss) and save them, the changes are not saved.

  I just installed hearing and have edited a few audio voiceover to remove the background hiss.  When I save the changes and reopen the file, the hiss is back.  The changes are not saved.  Why is this happening?  How to record the sound of the effects of reduction in my .wav file?

  [Ask in the correct forum allows... Left generic Cloud/Setup forum for forum specific program... MOD]

  shionak wrote:

  I capture the background hissing noise footprint > click apply > click on select, then click on apply again.

  These steps are not quite correct. You have two choices; either highlight a part of the background noise and use SHIFT + P, which captures your selection as a basis for NR or, open the Panel NR and use "Capture noise Print" from there, after making a selection first. After doing this, click on "select an entire file. What you definitely have to do is to use 'apply' at this point, and when use you it, just use it once.

  When you capture using printed, the Preview 'play' button inside the plugin to check the settings and then stop it. When you are satisfied of what he done, then click on 'Apply' - but once. This will apply for all of your noise reduction. As long as you do not use "undo" at any time, the version Number will be be recorded on the original, or if you use "save under", then the original will be left alone, and a new noise-reduced version will be saved.

• Cannot open any programs, I think that somehow the files have been changed to .lnk files

  Original title: I'm unable to open programs in my Start Menu.

  When I click on an item in the beginning, all programs selection and click it, instead of opening, I get the name of the program, for example Microsoft Works... LNK and that's all I get the program never opens.  I think somehow that the files have been changed to .lnk files but do not know how it happened

  This happened for several months and I'm sure that there is an easy solution to return to what it was but don't know what.  I tried the system restore, but that did nothing and don't know what to do next.  Any ideas?  Thank you... betseyd112

  original title:. LNK files

  Hello

  1. what operating system you are using on the computer?
  2. did you of recent changes on the computer before this problem?
  3 are you facing this problem with a particular program or all programs?
   
  See the methods and check if that helps.
  Method 1: refer to the article for help.
  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
  http://support.Microsoft.com/kb/950505
   
  If the problem persists, create a new user account and check if that helps.
   
   
  Method 2
  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Let us know the status of the issue.

• Access Manager will not see this website need a supervisor password. This Page has been blocked by your approved Sites list.

  kb956196

  Access Manager will not see this site, supervisor password needs.  This page has been blocked by your approved sites list

  We have forgotten the password. is there a way to reset the password or to disable it without the password?

  Hello

  Download and run the http://www.nirsoft.net/utils/conadvpass.html program (if you are able to access the site)

  If not, perform this task:

  "If you have forgotten the password of Access Manager, you can remove it by accessing this folder in Regedit (don't forget to back up your registry first):

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\

  CurrentVersion\Policies\Ratings

  Select the key called icon in the right pane and press on delete. Close Regedit.

  Now, you can start Internet Explorer and goto tools, Internet Options... Select the content tab and click on disable. When asked a password, do not write, just click OK. This will disable access Manager, since nothing is more a password. You can enable it again as soon as invent you a more memorable password"

• I get a message that says, "files required for Windows to run correctly have been replaced by unrecognized versions...» »

  Original title: Windows unrecognized files

  I get a message that says, "files required for Windows to run correctly have been replaced by unrecognized versions." To maintain stability, Windows must restore the original versions of these files. Insert your Windows XP Professional CD2 now. "I don't have this CD.  What can I do to fix the problem?

  Hi Kathy111,

  ·         Exactly when you receive this error message?

  I suggest you to perform the auditor of system files on the computer.

  You may consult:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Note: if it asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:

  http://support.Microsoft.com/kb/900910 (valid for Service pack 3)

  Hope this information helps.

• File names have been changed to the GUID

  Yesterday, three different actions on our servers had their folder names, replaced by what looks like GUID / their subfolders are unchanged and the files are in tact. Only root in sharing folders have been changed. Windows Server 2008.

  Other than manually, how can I get back them?

  Hi John,.

  It is usually the cause of these cryptographic records when there is an update. But nothing to worry because they do not affect the actual content of your files.

  We suggest that you try to rename them manually.

  Kind regards

• Why can't I print PDF files?  dialog boxes say cannot print and no pages have been selected

  I was unable to print PDF files with dialogs saying 'unable to Print' and 'no pages have been selected. Have uninstalled Adobe and reinstalled Adobe Reader DC without change!  Have you tried printing as image, copy it to the hard drive and create a copy by using Save as... All to no avail...

  Hi Doug,.

  Make sure that the printer drivers are PDF print troubleshoot update | Acrobat, Reader

  Also, try to temporarily turn off Mode/mode protected under Edit > Preferences > Security.

  Let me know how it goes.

  Kind regards

  Nicos

• Some policies appear in the PDF files after "Print" to PDF, but not after "save under" PDF

  FM9, Kozuka fonts and one of my custom symbols fonts show in a file PDF produced with "Print" and a PDF printer, but not when I do "save in" and select "Save as:" PDF. Kozuka characters out as boxes, and custom symbols are absent; Although if I highlight the place to be in the PDF, the font name shows. I use Acrobat 7 Pro.

  I tried to change the Asian fonts in the police combined with the "Pr6N" Kozuka provided with FM9 versions, but that did not work.

  I also tried to copy the fonts to "C:\Program Files\Adobe\FrameMaker9\fminit\fonts\adobe" and various other places, and of course, they are in the folder Fonts of Windows, nothing helps. My other custom symbols fonts work very well, and they are only in the Fonts to Windows folder.

  These fonts worked well in FM8. Any ideas?

  Thank you

  Tami

  Hello Tami,

  try saving the PDF file once again, but this time - in the dialog box options PDF - select the check box 'convert CMYK to RGB colours. Fonts now appear correctly? If so, it's just another bug of the famous engine FM CMYK. When you convert the colors to RGB, you get the same result as when printing to PDF.

  Bernd

• I think that my system of basic windows files have been changed and currupted can someone please help!

  I get major errors that led me to think my windows files have been modified and currupted I just can't install microsoft updates they download, but I'm unable to install, I'm unable to use the Disk Defragmenter and disk scan as it said my system is already in use. I am also unable to use my acer factory restore settings because it loads but never finishes running can someone please help! I am not in a position to buy or pay for a new cd of windows so that I can make a new clean instalation as I can't afford it can someone please help!

  Download of updates of work but the installation of updates arnt working
  installation of games arnt working cd - I get errors
  disk defragment simply does not work I click top but nothing happnens - perhaps sumthing to do with priviliages admin, but I am the administrator.
  Scan disk does not work as it says system is already used but works if I put it to run at reboot
  MY acer DEFAULT factory restore setting does not work it loads but never short - that led me to believe I have no control over my privliages of basic windows system, but I am the adminsitror.

  I already had major problems when WIndows would break and stops working when you start up, I managed to solve this problem in safe mode and disabling some start up programs to check the malware was eventually attached to my system using windows scanner and malwarebytes defnder, I managed, but it seems that it is undetectable.

  I am unable to afford a new cd for a new clean instalation of windows, I think I need. can someone please

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact Acer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://us-store.Acer.com/RCD/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It comes to the use of the partition Recovery of Acer to restore factory settings.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  Note: During the process, all data stored on your computer will be overwritten. This means that all of your files, such as e-mail and photos, will be deleted. Therefore, we recommend making a backup of all data before starting the recovery process.

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Some manufacturers have more available Vista recovery disks.

  If this happens or the recovery Partition is damaged, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• When I hit send file, send it to this page or send link does not work

  When I hit the file send send this page or send the link does not work

  * original title - my file, send a page or the link does not work *.

  Hello

  Welcome to the Microsoft Answers Forum!

  Please provide us with more information.

  ·         What on the computer email client do you use?

  Windows 7 is not no matter what installed integrated e-mail client that is required to send links. You may need to either install Windows Live Mail or Outlook.

  You can visit the below mentioned link to download windows live mail.

  http://download.live.com/wlmail

  If you want to install Outlook and then you will need to post your question in the newsgroup to the Office to get the best resolution. Please see the link below:

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings

• How do I open the .snp with Microsoft Office 2007 files is installed? It works with MS Office 2003, but not with MS Office 2007!

  I have MS Office Pro Plus 2007 is installed on my computer. I also MS Office 2003 is installed on a different computer. Snapshot viewer is installed on both. My snapshot of work files works with MS Office Access 2003 but not recognized by MS Office Access 2007. It would allow me to save them either! Is this a problem with FireFox (3.6.8)? However, I have no problem, open them using IE7/8 on both computers. Any ideas? Thank you.

  I heard about other problems with Office 2007 to 2003, but most of the people do not have Pro/business versions with access, so maybe there's a previously unnoticed problem.

  As indicated in my previous post, I don't always understand how you try to access the file. Can you right click and "save link as" to download?

• all .exe files have been changed to .lnk installing wireless keyboard, how can I recover

  We installed a wireless to a laptop keyboard... now all the files .exe on the computer have .lnk extensions. How can I fix it?

  Hi Audrey,.
  Follow the steps described in this guide: http://www.selectrealsecurity.com/fix-programs
  If you have any questions about the instructions, just ask. Let me know if this helps you.
  Brian

• I try to install my i phone and I need to update my itunes it recoginzes my Iphone but not my ipod

  I spoke to apple - they had me to install ITUNES lastes version - it now my IPHONE but not my IPOD - recongnizes we tried to uninstall and reinstall and a message came the SOFT WARE YOU ARE INSTALLING has NOT PASSED WINDOWS LOGO TESTING TO VERIFY ITS COMPATIBILITY WITH WINDOWS XP.

  CONTACT THE PROVIDER OF SOFTWAR SOFTWARE THAT HAS PASSED WINDOWS LOGO TESTING.

  It's really a problem iTunes/Apple.  In addition, you describe exactly what Apple had do you.

  However, the procedure below the line of * usually does the trick.

  Note 1: Uninstall iTunes and other Apple software should not remove your current music files.  Nevertheless, it is only prudent to make a backup first.

  Note 2: in general, if you have downloaded the software from a reputable site (for example, Apple), you can ignore the message that enforcement has not passed the Windows logo test.  On the other hand, I'm a little surprised that this message came as part of an installation of iTunes.  Particular piece of software has triggered this alert?

  Follow the directions below the line of *.  You can print them for reference.

  *******************************************************************************************

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete these files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility:
  http://support.Microsoft.com/kb/290301/ [this link is dead; see above]
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/