Yet another thread Sandy Bridge vs i7 - 9XX; 16GB vs 24 GB of memory?

Gentlemen.

Like many others, I read the hardware threads on an ongoing basis since getting CS5 about a year, including (I think) all items for damage. I feel that I have a basic understanding of the socket 1366 vs debate 1155/6. No need to re-hash things this time.

Yet, I think bad and others have made convincing for those who need the best, the X 58 with a big-time RAID configuration cannot be beat for the distribution of data and achieve the Holy Grail - balance. The worst the Z68 is derisory location of PCI-E lanes. I do not fully understand, but he can see that the many alleyways less, shared, is less than X 58. But don't the Z68 missing completely those of us who do not push the envelope? Who have a little more time waiting while the ' puter calculates?

I am on a budget and just want to spend my AMD Phenom II platform to an Intel platform. I mainly turn student videos of math which, by nature, must be no more than 5 minutes or more in length. My camera is a Canon T2i images so AVCHD. I took the advice of a member of the Board of Directors and will probably start shooting in VGA, questioning the sanity of shooting HD for clips that do not need to run mode full-screen. Overall, my requirements are on the low end (except for the codec. And I am ready to undertake NeoScene as a patch). I suspect that my needs are in line with many of those who can offer the student of CS5 version and find themselves in need of a new platform, but perhaps not ready for professionals.

Quick Sync appealed to me, that I need to transcode frequently for mobile devices. In addition, other teachers in the building along with camcorders JVC .mov, which means that they can not often change with their favorite software. I find myself any transcoding of our small team.

As I started to build something again over the summer, I'm trying to settle major issues in the face of those of us tax less end of the spectrum. I'll never get a RAID card, but have an arrangement of 5-disc basis, including a RAID on 2 discs 0 for a film. All I have to to is sorting out which platform is best for my needs of any

I'm just trying to move to Intel without breaking. But if another $ 250 for the X 58 will make a HUGE difference, so I would probably jump. Ventilation for a cheap (er) Intel platform:

CPU: i7 - 2500K. No Hyper-Threading but technology can overclock beyond more expensive i7-950. Only $30 cheaper than the i7-950. Spend $100 more for i7 - 2600K and get a higher Nehalem processor, but out behind on $$$.


Motherboards: Z68 starts about $130 for a decent spec'ed ASRock Z68 PRO3 to the ' egg. Fall another $20 for a combo with the CPU. Cripes, X 58 boards are expensive!

After the motherboard, i7 - 2500K and ASRock seek powerful good. $125 less than i7 - 950 and X 58 and who is with a X 58 cheaper Board. In addition, a four-stick kit memory 16GB is about $100 cheaper than 24 GB of G.Skill, rated either in ability Newegg brand. Economy of $225-ish. As long as my needs are satisfied, I'll save money and get a quick synchronization to start. At this point, I'm willing to bet that my short-clip needs will be met, in fact.

Thesis: Now, here can be the deciding factor - with the price of memory fall big-time, but within reasonable limits maximum memory on each platform. X 58 may take 24 GB, the senior Z68 to 16 GB. I remember Bill Gehrke saying that the first results of the suite of PPBM5 showed a difference in (rendering?) time with the jump to 24gigs. I think that the 16 GB looks like a lot of memory, which is. But dropping $100 for 24 concerts would be a game changer? I don't talk a 24 GB kits cheap with 9-9-9 times, not something jumped to hop to the top. (Requires X 58 memory super - duper or a motherboard $ 300 to run in fact 24 GB?)

X 58 may take 24 GB triple-channel memory would be the last word? For all of my tent to save $250 or more by going cheap (er) with i7 - 2500K SB, I'll miss on perhaps the most important? Most of the other programs in CS5 uses CUDA to accelerate - would be slightly less powerful i7-950 processor so supplemented by another 8GB (more than 50%!) of system memory that would apparently stealing other programs compared to SB?

If CS5 works just like a dog scalded on 24 GB, then I will suck and renounce Quick Sync and spend a little more money. I feel there is a difference of opinion if Sandy Bridge is a stronger for the edition CPU (even if there is no debate on X 58 vs Z68 for the processing of data). But it seems that there should be a clearer idea the benefits of 16 vs 24 GB of memory.

Everyone here would make a decision based on this last aspect?

Joel, the extra memory essentially has no effect on the scores of PPBM5 with the CS5 version.  We do not yet have any information on the CS5.5.  Look at the fourth note on PPBM5 it has been implemented with 14 GB on an X 58 Board.  Ultra complex timeline manipulation and encoding may be a little different.  I suspect this fall when the Sandy Bridge E CPU and motherboards are released that will start to see the memory strong 8 GB for these cards so that when this produces the current generation Sandy Bridge motherboards will be then be able to be upgraded to 32 GB as some motherboard manufacturers have promised.

Tags: Premiere

Similar Questions

  • Yet another thread of circles.

    Hello

    I looked at the various threads on the definition of the background of an application, but somehow everything that I come up with is a blank screen without any components.

    Here is my code-

    public LoginScreen() {}

    I found paintBackground is best to use when you want to draw a simple background and paint should be left for the rest.

    paintBackground()

    Paint the background of the screen.

    The system calls this method prior to painting in order to erase the background of the screen, the initialization of your graphic context provided commensurate with this screen.

    By default, this simple method calls clear; for a more complex manipulation, you must override this method in extension classes.

  • Yet another thread of the 6.18 crash

    Yes I have seen a lot of this here in the Skype community topics, however, mine is more severe that it freezes my laptop whenever I tried to start my Skype, it freezes my laptop that I double clicked on Skype, and there are times that my laptop has managed to get into Skype, then freeze. It is this last that I have been informed by Skype that it has been updated to the latest version... It forces me to reinstall my windows 7 Home premium 64-bit, because the problem was so severe that I can do almost anything with my laptop, even after that I restart my laptop, without even starting Skype or auto start. Now, even after formatting my computer laptop, I just tried to install Skype on my laptop once again, but it won't let me install, (it's stuck in: "Please wait while Skype is installed") 10 min. spent so I decided to leave the installation, and Yes, it does not... Please fix this A.S.A.P. because I have a lot of contacts and friends I chat with all day using Skype.

    My laptop specs incase you guys need computer-HP pavilion DV6-6001tx

    8 GB RAM at 1333 MHz

    I7-2630QM

    Windows 7 Home Premium 64 bit official licensed

    Try to install Skype using this installer msi for the 6.14.0.104 previous version of Skype:

    http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

    In addition, open the Windows Device Manager. See you there some "unknown devices"?

  • G6-1262sa Pavilion: Pavilion g6-1262sa CPU upgrade v2, Sandy Bridge = > Ivy Bridge?

    Hi, thanks to the Pavilion g6-1262sa maintenance and manual cleaning and this great forum, I recently discovered that replace my i3-2330 m is possible with all sandy bridge i7 2620m processors.

    These questions may sound silly, but I continued my research and I have more ideas to confront reality as a couple.

    I realize that the compatibility is not only matter of editing the same socket, but also of the bios installed on certain motherboard, however:

    1. do you think it would be possible to Exchange Sandy Bridge (2nd generation) i3 - 2330 m for some Ivy Bridge (3rd generation) i5-3210 m?

    2 is the 32nm to 22nm manufacturing technology enough difference on its own (even if the rest of the architecture is the same) to prevent that to work?

    3 is the bios from my card mother g6 identyfying somehow installed processor? (if this isn't on 'the list' it simply won't work? "or what technical compatibility issue?

    According to some statements which I found it on some forums and sites (and a few facts documented free):

    Socket: the two processors are compatible with BGA1023 decision-making. (at least that's what I found, if someone could confirm I would be grateful)

    Difference of architecture: "The 3rd generation is called 'Ivy Bridge' and is essentially a copy of Sandy Bridge made on a smaller scale, or die." However, Intel also focused on beefing up of the onboard graphics in this generation. »

    TDP: both are 35 W

    Carrots: both are 2 physical (Virtual 4 - thanks to hyperthreading I guess?)

    Energy consumption: "Ivy Bridge CPUS also use less energy", "Ivy Bridge consumes less energy; around 10w, I think. »

    Temperature: i5-3210 m going 5 * C more - 2330 m - i3 shouldn't make much difference

    Looking forward to some responses, RacA

    It is not a technical incompatibility (socket) because as you probably know Ivy Bridge and Sandy Bridge are backward compatible on most motherboards desktop. However, HP has only implemented gen 2d, processor Intel Core compatibility of the HM65 Express chipset that you a. motherboards supporting 3rd gen processors use the HM77 chipset. There is no another motherboard that will fit in your frame.

    Your analysis above, which was pretty good, left out the chipset, which you must always remember when assessing the possibilities of upgrade:

    http://www.CPU-upgrade.com/MB-Intel_%28chipsets%29/HM65_Express.html

    The HM65 supports a couple 3rd gen processors, but none of them are on the list of HP for your model. You can try one of those shown in the link I gave, but I think that there is a small chance that they will work.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Fix for nasty bug of Sandy Bridge badly on USB devices

    Anyone know if there is a fix yet, some USB devices fail intermittently on a new MB with Windows 7 64 - bit edition.

    It is a quad core running the Sandy Bridge chipset, and vodafone dongles does work, even if they did on W7 64 bit on the former Council.

    Fault too:-some external hard drives are not recognized on any port.

    Your hard drives are connected via SATA?

    There is a known issue with some Sandy Bridge chipsets, where ports SATA fail, don't know if it affects USB ports or not.

    Intel issued a notice of recall for this with the affected chipsets - did you check the Intel website to see if you are one of those affected

  • Sandy Bridge and PCI channels/performance question

    I was doing emergency surgery on my old HP and I remembered that I have a couple of old graphics cards lying around. And that made me think of my collection in constant expansion of hard drives and never less in less free time, backups, and Sandy Bridge platform limited channels PCI and their (real? theoretical?) effect on performance with cards cards additional specifically RAID. If I'm covering old ground, let me know.

    As I understand, there is not much to be gained by installing an old ATI HD2400 Pro or similar in a new computer, what I'm really wondering is - after installing the card and a third running monitor on it - of the main graphics card and related parts of my system would suffer a slowdown similar to what might be expected if a RAID card is installed.

    (And no, I don't mean to revive the heated discussions of Sandy Bridge / X 58.) Is it you like someone ' one, anyone - let them be above!)

    I am just wondering if it might be a worthwhile project to compare benchmarks with and without a second graphics card installed and if someone thinks it would be a logical way to see no effect on the allocation of 570's PCI channels alone, without the complication of a real external RAID array question (and the enormous benefits it would probably).

    everything you need to know here

    http://forums.Adobe.com/thread/854514?TSTART=30

    This has been put to bed in time there...

    Scott

    ADK

  • Omni 1020 120 pc: upgrade processor motherboard Sandy bridge

    Can I use Intel Core i3-3220 (3rd generation) Ivy Bridge 3.3 GHz LGA 1155 55W Intel HD Graphics 2500 for my Omni 1020 120 pc aio pc?

    Thank you for the information, @Nannigalaxy.

    The information I needed was the (in) at the end of the model.  Here are the processors that have been fully tested to work in your motherboard:

    TDP: up to 65W
    Socket type: LGA 1155
    Motherboard supports the following processor upgrades:
    Intel Pentium G4xx (Sandy Bridge) core
    Dual-core Intel Pentium G5xx (Sandy Bridge)
    Dual-core Intel Pentium G6xxT (Sandy Bridge)
    Dual-core Intel Pentium G6xx (Sandy Bridge)
    Dual-core Intel Pentium G8xx (Sandy Bridge)
    Intel Core i3-2xxx/T (Sandy Bridge) Dual Core
    Intel Core i3-2xxx (Sandy Bridge) Dual Core
    Intel Core i5-2xxx (Sandy Bridge) Quad Core
    Intel Core i7-2xxx (Sandy Bridge) Quad Core

    These are processors that we know won't work correctly.  If you use any processor not on the list, he has a good chance that it won't work.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Satellite P750 - 10 c: HARD drive slows down - Sandy Bridge Cougar problem?

    Hello

    I have problem with my notebook Satellite P750 - 10 c with S/N: 4B478828K.
    When I enabled AHCI in the BIOS, computer slows diametrically, day after day was worste and worste, so I tried to change from AHCI to IDE and it helped a little, but is still not good.

    I tried to restore my system, but it did not help.
    I read that Intel has released a version tapped for Sandy Bridge chipset, I have (HM65) SATA 3Gbs problem (I just checked in HD Tune and HARD drive is connected to the port of 3Gbs), so I think I got bugged version.

    My laptop is not guaranteed, but Intel said they changed valid version, so where do I return my phone to fix.

    Kind regards
    Tomek

    > I read that Intel launched buggy version of the chipset for Sandy Bridge.
    The problem was a Cougar Point of Sandy Bridge chipset and not the main processor Sandy Bridge.

    In addition Intel said that this issue affected only the SATA 2 to 5 and not ports 0 and 1.
    Most laptops use only two devices SATA (HDD/SSD and ODD) using the affected ports 0 and 1.
    That is why I think that your problem could be linked to the issue of Cougar Point the Sandy Bridge chipset.

    By the way: not all Intel Sandy Bridge chipsets have been affected.

    Regarding your question:
    Usually if AHCI is enabled, the HARD drive must use the performance of SATA. If compatibility mode, the HARD drive would go at the speed of the IDE.
    I think your problem is perhaps related to the problem drive HARD and not Intel problem.

  • Sandy Bridge for Ivy Bridge CPU upgrade in the W520

    Sandy Bridge and Ivy Bridge using the same socket. All tech sites say that we can do.

    What are the implications? With HD-4000 graphics I would now be able to drive 4 monitors? What other benefits are there? Energy consumption is slightly reduced, the speed is slightly increased.

    What are the limits of the chipset and BIOS implications?

    It's probably not about the money, but will it work?


  • GoTo another thread

    Hi, this is my first post OR so if I get something wrong please don't flame me

    In teststand, I have my mainsequence along another thread (the other thread is used to look for keyboarding)
    If I push escape on my keyboard, I want to use the goto command to take me to the cleaning section in the mainsequence so to end the test and clean running.

    The closest, I managed to get is teststand raise an error that the step that I'm going through is not in the current sequence.

    Here is the code:

    So Locals.TestRunning
    Download labview get keyboard (input)
    If Locals.keyPressed is 62

    GoTo<- i="" want="" this="" to="" say="" goto="" mainsequence="" thread="" to="" whatever="" point="" i="" want="" (cleanup="" in="" this="">

    End

    End

    Any solution or another way to do it will be highly appreciated

    You can pass the context of the sequence to this "watchdog" when starting of execution and call then put an end to execution. This is not really the best solution, but perhaps one that suits without need to rework these sequences and modules of code...

    Norbert

  • I NEED HELP TO SOLVE MY PROBLEM OF SANDY BRIDGE CHIPSET!

    Hello

    I need someone to receive the update for my Pavilion Dv7 help 4290us part!.

    It is one of the machines involved in the problem of Sandy Bridge, I checked several times...

    I'm already registered the laptop

    Thanks in advance

    Manuel Ramirez

    The number of product of your laptop is XZ037UA #ABA (here ABA means this model has been sold in the United States only). Where was this laptop bought exactly and where are you located now?

    HP offers a comprehensive guarantee and ideally, this should be covered free of charge. You can find more info on link below

    http://support.HP.com/us-en/document/bpr01266

  • Please do you intend to produce T series laptop with 15.6 display based on Sandy Bridge?

    Please tell me you intend to produce T series laptop with screen 15.6 inches based on Sandy Bridge processors? Please write soon. I await your response. Thanks in advance, you

    If you scroll down a little ways on www.Thinkpads.com, they say that the T420/T520 will be introduced in February.

  • In another thread - another method and then run Sub...

    I wrote a method to extract a string from a webpage using StreamConnection and it works perfectly... except that it runs on the main thread.  I wonder if there is a simple way to have a method that returns an object (String in this case) something to run on a thread and return it to the first thread.

    Everything I try the only thing I can get to work on the second thread is what's on the run method void, but that returns nothing... because it sucks...

    Until now what I thought is to pass the variables I need in the constructor, then set the connection stream real term where I want retruned is written in a class variable and another method that returns the class variable that has been filled with the run method... but that doesn't seem to just... thought he worked in a simple test I ran...

    A slightly different way (but completely equivalent) to work in a another thread is to create a class that implements Runnable and feed a thread. If, for any reason, you do not want to expand Thread (because your worker class extends already something else and it would be difficult to refactor), then this variant is a lifeline. You do something like this:

    class WorkerClass extends AnotherClass implements Runnable {    // ...    public void run() {       // do time-consuming work here    }}
    
    // later...WorkerClass worker = new WorkerClass();// initialize worker object. Then: new Thread(worker).start();
    

    As it is easy to turn a class in an executable (you simply add "implements Runnable" and a run() method), it's an easy way to avoid the subclassing Thread.

    Regardless of how you use to perform work in a separate thread, there is always the question of how to get the results. With the help of the observer is a common way to handle this, but in general, this means that the results are returned in the worker thread, not the thread from the main event. If you want to update the user interface, this can be a problem. Another approach is to structure your code something like the following:

    /** * Process the results of some time-consuming operation. */public void acceptResults(ResultType result) {  // ...}
    
    /** * Start a thread to carry out time-consuming work in a * separate thread and deliver the results back in the * event dispatching thread. */public void launchWork() {  new Thread() {        public void run() {           final ResultType res = computeResults();          Runnable r = new Runnable() {                public void run() {                   acceptResults(res);               }         }         Application.getApplication().invokeLater(r);      }
    
           /**        * Do time-consuming work in this method       */       private ResultType computeResults() {         // connect to server, interpret reply, etc.       } }.start();}
    

    You have the right idea that is running in a thread separate is how to manage a time consuming task. The point of all, however, is that you (the event dispatching thread) don't want to wait for the task at hand. Both the observer model and the code here offer a solution for a worker thread to do the work without blocking the thread of the event. The invokeLater() method was kindly provided by BlackBerry people to give the worker threads neatly transfer control on the event dispatching thread when needed.

  • Just got yet another call for "Windows Service Station"

    Just got yet another call for "Windows service station', saying: I was hacked and my computer sends windows warning messages and if I didn't follow his instructions all my data would be deleted... An Indian-sounding guy named Sam... I played along and got a phone number, saying: I would like to remind him he said 0808 1890111 which is a UK addiction hotline...

    I played along 'Sam' gave me an extremely long code to type in something on the windows event viewer... I know it's a scam and we have these calls often 3 times a week for a few years now. I play at the same time or am quite rude and tell them to be ashamed of themselves, depending on my mood... I really wish that they would go, but I can't this blocks 'any number' because it is off the coast.
    Any suggestions on how to remove our number and the name of their list (I asked the scammers do, but they don't notice).

    Certainly a SCAM, you have made the right choice. Never to give them information and never leave access to your PC.

    It is difficult, if not impossible to remove your number from a list of scam once its on it. And it's hard to know how they got it in the first place. It could be a list simple phone book. Recording with things like Telephone Preference Service (United Kingdom) and asking to be made "Red" (BT - UK) can make it harder for them to get a number in the first place, but once they have it probably wont help. It can stop any other do however.

    There are devices like Call Blocker, which can be programmed for their calls not ring your line, but it depends on what number they release when they call. If their number is "held" and then some providers have a service to stop calls "deductions number' to ring your line. ACR service (BT - Uk).

    PS - the links above are a few examples of our services/devices to the United Kingdom for more information.

  • Sandy Bridge chipset problem

    New computers from Dell desktop XPS 8300 with processors Intel i7 2600 still have the 'Sandy Bridge chipset' fault on their motherboards 67-series?  I read that Dell at first continued to build defective systems, while planning replace motherboards later for customers who have applied the patch.  Is this still the case now?

    Don't believe everything you hear / read:

    en.Community.Dell.com/.../Intel-Chipset-issue.aspx

    www.ZDNet.com/.../11220

    They were 'fired' and is most sold once they have received the word of Intel on the issue.  Once equipped with the chipset update, sales picked up.  Motherboards have been replaced and returns available to those who bought before the problem came to light.

Maybe you are looking for

  • Best way to record audio from my Mac?

    I want to record audio from YouTube on my Mac - what is the best method? I remember I used to connect my iPad to my Mac via a cable, play on my iPad and record audio on my Mac, but I don't remember the steps I took to make (it was perhaps with Audaci

  • Remove the library generated files?

    Is it possible to remove generated files in library of several libraries at once? I have about 30 libraries from 2015, I am about to archive but Id like to make them smaller so that they take up less space. Instead of individually open each library,

  • The volume control does not work on my Tecra A9

    Hi all I just be reformatted my laptop and put all the drivers and have a slight problem my on the front volume control not working anymore.How to operate?Also when I go to Toshiba Assist on doctor connectivity the bluetoooth does not come to the top

  • connect to 9791 WSN gateway on different domain

    RE: gateway WSN-9791 I want to collect data from a WSN without going through a computer at the location of very distant field.  For 1 beat per minute, we don't need the power and the cost of a RIO, or even a laptop computer in the remote location. I

  • I need to back up my pc, I've got flashdrives, never save anything. How can I do this

    I need to know how to make a backup of my pc with 16 gb flashdrives. The PC is 15 years. Windows XP HPpavilion xt963