Yoga 11 s - maximum clock speed

Similar Questions

• Owners of Quadro 4000 - with first or After effects maximum clock speed

  Hey guys,.

  I installed my Quadro 2000 to a 4000 (latest driver 311,35 and I wonder if your clock of all speeds jump up when the first running or sequels?) Even if no changes or playback happens and GPU load is at 0%? Or are they doing they throttle down when idle? I use GPU - Z to check.

  Mine joystick down once I leave the first (or After effects)... I was wondering if anyone else is having the same experience. I know they run really hot when the clock pseeds are up.

  Also, I have powermanagement set to "prefer maximum" and I use mode video editng for the basic profile of New York City.

  Salud.

  Mine did the same thing as yours. I'm not under the latest drivers - still. I also updated the High Performance power management.

• Yoga clock speed 900

  Hello

  I'm looking in the "Performance" of the Task Manager tab and see that the CPU runs at ranging from 2.98 to 3.1 GHz clock speeds. Usage is not high, just the speed of the CPU. Y at - it a reason for this and can it be fixed so the speed decreases? I ask because I have not seen a computer constantly run at a clock speed near its value boosted. The minimum processor state is set to 5% in my power settings.

  I believe that the ONLY WAY to reduce the frequency is to go to the "balanced"... profile

• [Support request] Why my X 61 Core2DuoT9300 read clock speed 1.2 Ghz max since the @2 capasity. 5 Ghz

  Dear lenovo community

  I really need help for my problem here as I already looking for information a lot on the net but can't find the answer:

  I have Thinkpad X 61 with spec like this after benchmark with AIDA64/Everest:

  Intel Core2duo T9300 (Peryn) @2. 50 Ghz

  Processor clock: 1200 Mhz (original 2500 Mhz)

  CPU multiplier: x 6

  CPU FSB: 199 Mhz (200 Mhz original)

  Memory bus: 332,5 mhz

  L2 cache memory: 6 MB

  Motherboard: lenovo Thinkpad X 61

  HD: 250 GB Hitachi SATA 5400 RPM, 8 MB buffer

  BIOS: BIOS Type Phoenix (18/04/08)

  This laptop using Vista as OS.

  Previously, I wonder why this laptop performance is quite similar with my old intel-P3 500 mhz, very slow

  so after the reference with the software I know that my laptop is running half than the peak performance: @1. 2 Ghz compare with the capasity of maks @2. 5 Ghz, so I already knew what the causes of this slowdown.

  I had another computer toshiba T5500, each cpu core read with maximum @1. 5 Ghz, so I think that there is something big Miss here because my X 61 compare to old toshiba could say 2 times slower

  So I hope no friends could help guide me how to set the clock in the original speed, as should be

  I try to log in the bios but sees no possibility to change the speed

  Thank you somuch

  Rgds

  GON

  Thank you all, I found the solution for this problem to

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-71222#DOCTOP

  http://Forum.ThinkPads.com/viewtopic.php?f=30&t=92302&view=previous

  conclusion:

  The clock speed will be less than the normal speed if I plug out the batery and use 65w adapter

  When I use my adapter (65w) as well as the battery the clock cpu core back to normal (2.5 Ghz), an alternative if we want to use the adapter without battery taken in. we need to change the adapter 90w series

  Detective Conan now

  TQ

• Clock speed of the Radeon HD 4650 in the Satellite P300-23F

  Hi all!

  I am interested by the Satellite P300-23F because of its nice, these two drives huge CPU and - finally and above all - good price. But I can't estimate exactly its graphics performance, because I could not find information about the ATI Mobility Radeon HD 4650 used in this book's exact clock speeds.
  Did someone already has a P300-23F? If you do, could you please read the core and the memory clocks the GPU with a tool such as the CCC or GPU - Z? Perhaps you have also information about the temperatures of the CPU and HARD drive and also on the performance of the HARD drive?

  Thank you...

  Hello

  To be honest I m P300 owner but not the ATI Mobility Radeon HD 4650 is known as M96 ATI with DDR3 (1 GB) of graphics ram.
  I think that it s is not easy to say some details about the exact chip GPU clock speed because it of always different. It depends on the use of the laptop and the temperature.
  You must know that the performance of the GPU are controlled by the graphics driver and if the temperature increases to a critical level, that the pilot might slow down the chip so decreases the heat dissipation.

  The temperature of the processor and HARD drive depends on the use of the laptop too.
  If you run games high performance, then the temperature increases to a higher level and would be higher than the execution of only a few common tools such as MS Office Word for example.

  However maybe someone could put some values and details, it would be really interesting.

• How to stop the power management to change my clock speed?

  Greetings,

  I run a HP compaq nx6320 laptop.

  I noticed that sometimes, when the computer is unplugged, the clock speed of the processor is reduced. intuitively, this seems to be a technique of energy saving.

  Using the Intel processor identification utility, I get something like this:

  

  And I suffer notable sluggish performance for all applications.

  I know that laptops tend to conserve that unplugged while power, some for example dim the screen, but they allow the user to increase the lighting, although it would reduce the time the computer can work with batteries.

  I want something similar about the speed of the processor, I want to turn this feature off and power the computer at full speed while it is unplugged.

  In addition, this feature is errornous, I took the screenshot above, while my computer is running on the current! and do not know why the power management insists on reducing the clock speed.

  All this turns out be caused by overheating. I'm misleaded by the tip of the utility intel PID.

  The fan of my computer was blocked by the filter sponge, which is made of a material that is poor, so partially decomposed and clogged the fan.

• When I start my computer the clock speed of dram seems incorrect. Help, please.

  Original title: dram clock speed.

  When I start my computer the clock speed of dram shows at 133, but I use pc3200 which is 400.  I understand that you must double the clock speed of the dram when using dual ram, but dram clock speed should be 200?  and if so how do I ftx like it, thanks ernie,.

  following my recent posts, I tried a few other sticks of ddr400, today, I put them first into single just like sticks and the dram clock speed is 400.  as you advised the previous ram was poorly labeled so.  at the moment, I have two sticks of ddr400 and and everything seems to be fine.  I'll invest in a pair of quality ddr400 and I hope that now my problem is solved, thank you for your help and advice, and pointing me in the right direction to find the problem, I enjoyed it, best regards, ernie.

• Z620 HP: HP Z620: increase the clock speed of the processor

  I have a HP Z620 workstation with processor Intel Xeon E5-2620v2. In the datasheet writes: "Turbo boost stepping occurs in increments of 100 MHz.".
  I want to increase the clock speed of the processor to the top of 2.1 GHz to 2.5 GHz. How to do?

  Hello

  Turbo boost is dynamic based on demand. If you want a base clock faster then replace two processors Xeon E5-2630 v2.  If your application cannot take advantage of 6 hearts then consider the E5-1620 v2 which is 4 cores and has a base of 3.7 and turbos at 3.9 clock.

  BTW - Turbo boost are not available on all PC configurations.

• How to set the maximum fan speed. on X230t (Windows 8)?

  How to set the maximum fan speed. on X230t (Windows 8)?

  I use TPfancontrol to set the speed of the fan in the X230t. However, this will result in excessive wear on your bearing X230t fan, which causes a premature fan failure. Is there a reason why you want to run the fan at max speed?

• CPU clock speed condition sine qua non for the execution of 11.2

  DB version: 11.2
  Platform: Solaris, Linus (anything that can be run in x 86 environment)
  
  I'll buy a laptop. Being an AMD fan, I was thinking of buying a laptop with the
  newly launched AMD LLano.
  
  Faster AMD Llano chip for laptop is A8-3530MX. Clock speed is only 1.9 Ghz but will reach 2.6 Ghz using the 'Turbo' technology.
  
  http://www.AMD.com/us/products/Notebook/APU/mainstream/pages/mainstream.aspx#/3
  (Click on the product sheet tab)
  
  
  http://fastestcomputerworld.blogspot.com/2011/05/AMD-Llano-A8-3530MX-review.html
  
  
  In the document of 11.2 installation, I couldn't find a sine qua non being mentioned about clock speed
  
  
  http://download.Oracle.com/docs/CD/E11882_01/install.112/e17163/pre_install.htm#BABHICEE
  
  Any idea where I can find this info?

  Hello

  Minimum 2 Core CPU should be fine for the test, you need to do is 8 GB of memory at least

  See you soon

• Satellite Pro 6100: Intel Pentium 4 M clocked 0.2 Mhz instead of 1.8 MhZ clock speed

  Hello

  I have a 6100 Pro Satellite under XP SP2 on Bios 1.90. A few days ago, he suddenly started running very slowly.
  According to the value of the ID of Intel, processor running at approximately 0.2 MHz, instead of the maximum speed of 1.8 MHz, with a similar reduction in the speed of the bus.
  I have reset the BIOS and restore the MBR & OS, but the problem remains.

  I'm running on current alternative, with display 100% charged battery. I also turned off all power settings to try to stop the running slow robot through the Intel speedstep technology.

  This might sound like a hardware problem, but if I boot the machine from a Linux CD (Knoppix), it works very well - very reactive, and according to linux, the clock measures the speed to about 1.79 MHz.

  Does anyone has an idea what could be causing this, or what I can try next?

  Hello

  at first your machine cannot operate at 0.2 Mhz. It's impossible! So I think that this utility Intel ID is not give you correct information. He must know that the slower speed will achieve your cpu, established in the region of 600 mhz.
  With 0.2 Mhz run your computer won´t!
  You said that you have restored your system, but the fact that you have installed the latest drivers and tools for this computer from the Web from Toshiba site?

  Maybe your CPU is defective, which can be a reason.

  Welcome them

• ATI Radeon Mobility Core/memory clock speeds - Satellite P10 873

  I have a portable Satellite P10 873 using 64 MB Radeon 9700 Mobility GPU, the base clock is set at 400 and 200 memory. The chip must be run to 450/260 so if anyone from Toshiba is reading this can you tell me if the cooling of the Gpu is sufficient for these speeds (judging by the traces of burning on my thighs could well be unlikely)?

  Is also the 64 MB expandable to 128 MB of VRAM?

  Post edited by: carmeldoab

  Hi Carmel

  First of all the graphics card is a small chip that attaches to the motherboard.
  The graphics card has no own cooling system. Only the CPU has a cooling fan.

  Toshiba recommends to use the graphic driver Toshiba because the drivers are changed and support an overheating protection. In this case the graphics driver controls the heat produced by the graphics card.
  In this case, it s undesirable to overclock the graphics card. If you want to overclock something so do it at your own RISK

• Clock speed of Centrino M30

  I have a portable Satellite Pro M30 and when I check the system information, it indicates that the speed of the clock is 598 MHz, while the processor should run at 1.5 GHz, I tried to use "high" option from BIOS, but this does not alter the frequency at all. the laptop is substantailly slower it is, and it has been like this since I bought it.
  What can I do to fix this?

  Thank you for your help

  Hey,.

  Did you send the unit for repair or is it will likewise always because it is a tool that must be executed on the device so that it works properly, you must consider to an authorized Service Center

  See you soon

• Satellite Pro A120 (PSAC1E-05E01FIT) - fan always to the maximum. Speed

  Hello, in this laptop now I istalled this CPU: Intel Core Duo (Yonah) [email protected] and it's OK.

  This morning, I tried to replace the processor with this: Intel Core 2 Duo Mobile T7200 (Merom) processor.
  Works from pc but didn't enter the BIOS, the fan always starts at maximum speed, S.O. Windows XP Pro has started, but the fan still max speed!

  Why?

  Hello!

  You also have this problem with your old CPU?

  In my opinion, the problem is the new processor. Maybe your motherboard / CPU doesn't support and so the fan run always on the highest speed.
  If you just replace the CPU by yourself, it could be that you have used enough thermal grease.

  Updates on the laptop I can prefer this Toshiba document:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  Good bye

• Satellite L300 PSLB8E - how to increase the ram clock speed

  I have a laptop which is equipped with 2 slots for ram PC2-6400
  1 - Samsung module M4 70T5663QZ3-CF7 [800 MHz] 2GB
  2 - Samsung module M4 70T2864QZ3-CF7 [800 MHz] 1 GB
  GPU: Intel GM45
  Processor: Intel Core 2 Duo T5870 Mobile @ 2000 MHz
  According to the manufacturer, this kit allows you to work with the 667/800 MHz memory speed, but the problem is that reference programs show the actual frequency of the ram at 399 MHz.

  Question No. 1:
  (a) why not clock the memory works in 800 MHz but only 399 MHz,
  (b) how to change to a 800 MHz

  Question No. 2:
  I'm going to buy a processor
  Penryn Core 2 Duo T9600 processor (1066 MHz FSB) (2.80 G) Hz or T9400 (2.53 G)
  and install it in the computer
  and increase the memory of 2 x 4 GB 800 MHz (8 GB)

  I explained that this possibility is provided for by the manufacturer according to the Maintenance Manual for:
  Toshiba computer
  Satellite L300/L305
  Satellite Pro L300
  EQUIUM L300
  SATEGO L300
  (PSLB8x/PSLB9x)
  (PSLBAx / PSLBBx)

  If this operation will help to improve system performance

  I put t know what programs you use and if it is good or not if this info can be good and perhaps not. I put t know. The fact is that you n t have one any influence on the functionality of memory and I doubt that you can do something and change some values.

  Exact specification for laptop laptop does not for me but I think that Satellite L300 must have Intel GM45 chipset and I presume that for your motherboard FSB is 667 MHz. You can improve up to 8 GB and compatible 4 GB RAM module has PA3670U-1M4G part number.

  Upgrade CPU on Satellite L300? I put t know man. A friend of mine has this model of laptop and I don t know if it's the right decision to spend money to upgrade this old model of laptop budget.
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm