Yoga 11s Volume problem

Similar Questions

• 12.4.3.1 update volume problems created?

  12.4.3.1 update volume problems created?

  Hello

  I had no problem with the Volume in the latest version of iTunes. Can you give more details about the problem you are having?

  Jim

• Alarm volume problem

  I have a problem... I set my alarm Sunday for the entire week, but too often I don't wake up. Why? Because my alarm was too quiet. So, let's see. First of all, I set my alarm. Then I put the volume on the phone to the max position. And I fall asleep. No, it won't wake up. Because I have to do a thing. I have to turn on my * music *, do * music * volume to the maximum, then my * volume alarm * will be fine and he's going to wake me up. So, I'm a programmer and my life - to solve problems, but in my opinion, it's too hard for ordinary people. I hope that Apple will see my message and correct it, or is the best solution.

  DiegoLing wrote:

  I hope that Apple will see my message and correct it, or is the best solution.

  No, they won't. Submit your comments here:

  http://www.Apple.com/feedback

• Satellite Pro T110 - speaker volume problem

  How can I increase the volume on the speakers in my T110?
  Ive read other forums that suggest that it is just the way it is, but who is not normal - its impossible to hear on max.
  My partner has a Toshiba NB300 (much smaller), but the volume of the speaker is much better.
  Is this a common problem with the T110 buyers?
  Y at - it a solution please?

  Hey Buddy,

  I've never seen other forums where people are talking about low volume on Satellite T110, I have also this model and the volume is OK for this small and ultra portable laptop.

  I think you want to increase the volume when you watch movies or listen to music, right?
  Well, in this case I recommend using VLC media player. In my opinion he of the best player of freeware and use it, you can improve volume compared to Windows media player.

  Take a look on Google to find it. He the freeware tool so I put t think it's a problem to find. ;)

  Check this box!

• 2 13 yoga boot configuration problem

  Hi all

  After a boot on my laptop problem, I need the result of the following command as an administrator:

  bcdedit/enum all

  If somenone kind could stick here, it would be nice

  THX

  Guillaume.

  Hello

  I own 2 13 yoga and I ran for you the bcdedit/enum all. Please find below the results:

  Microsoft Windows [Version 6.3.9600]
  (c) Microsoft Corporation, 2013. All rights reserved.

  All C:\Windows\System32>bcdedit/enum

  The firmware boot manager
  ---------------------
  identifier {fwbootmgr}
  displayorder {bootmgr}
  {9619ad2f-fac6-11e4-bf22-8b60e97cdca5}
  {9619ad2c-fac6-11e4-bf22-8b60e97cdca5}
  {9619ad2d-fac6-11e4-bf22-8b60e97cdca5}
  {9619ad2e-fac6-11e4-bf22-8b60e97cdca5}
  Timeout 0

  Windows Boot Manager
  --------------------
  identifier {bootmgr}
  partition Device = \Device\HarddiskVolume3
  path \EFI\Microsoft\Boot\bootmgfw.efi
  Description Windows Boot Manager
  settings regional en - US
  inherit {globalsettings}
  default {current}
  RESUMEOBJECT {95a4fa05-fac6-11e4-bf22-8b60e97cdca5}
  displayorder {current}
  toolsdisplayorder {memdiag}
  timeout 30

  Firmware application (101fffff)
  -------------------------------
  identifier {9619ad2c-fac6-11e4-bf22-8b60e97cdca5}
  Device description USB EFI

  Firmware application (101fffff)
  -------------------------------
  identifier {9619ad2d-fac6-11e4-bf22-8b60e97cdca5}
  EFI DVD/CDROM description

  Firmware application (101fffff)
  -------------------------------
  identifier {9619ad2e-fac6-11e4-bf22-8b60e97cdca5}
  EFI network description

  Firmware application (101fffff)
  -------------------------------
  identifier {9619ad2f-fac6-11e4-bf22-8b60e97cdca5}
  partition Device = \Device\HarddiskVolume4
  path \EFI\Microsoft\Boot\LrsBootMgr.efi
  Description of the Lenovo recovery system

  Windows boot loader
  -------------------
  identifier {current}
  Device partition = C:
  path \windows\system32\winload.efi
  Description Windows 8.1
  settings regional en - US
  inherit {bootloadersettings}
  recoverysequence {9619ad32-fac6-11e4-bf22-8b60e97cdca5}
  recoveryenabled Yes
  isolatedcontext Yes
  allowedinmemorysettings 0 x 15000075
  OSDEVICE partition = C:
  SystemRoot \windows
  RESUMEOBJECT {95a4fa05-fac6-11e4-bf22-8b60e97cdca5}
  NX OptIn
  bootmenupolicy Standard
  detecthal Yes

  Windows boot loader
  -------------------
  identifier {9619ad32-fac6-11e4-bf22-8b60e97cdca5}
  device = \Recovery\WindowsRE\Win [\Device\HarddiskVolume2] ramdisk
  Re.wim, {9619ad33-fac6-11e4-bf22-8b60e97cdca5}
  path \windows\system32\winload.efi
  Description of the Windows recovery environment
  in local - we
  inherit {bootloadersettings}
  DisplayMessage recovery
  displaymessageoverride recovery
  OSDEVICE ramdisk = \Recovery\WindowsRE\Win [\Device\HarddiskVolume2]
  Re.wim, {9619ad33-fac6-11e4-bf22-8b60e97cdca5}
  SystemRoot \windows
  NX OptIn
  bootmenupolicy Standard
  WinPE Yes

  Out of the hibernation
  ---------------------
  identifier {95a4fa05-fac6-11e4-bf22-8b60e97cdca5}
  Device partition = C:
  path \windows\system32\winresume.efi
  Description Windows Resume Application
  settings regional en - US
  inherit {resumeloadersettings}
  recoverysequence {9619ad32-fac6-11e4-bf22-8b60e97cdca5}
  recoveryenabled Yes
  isolatedcontext Yes
  allowedinmemorysettings 0 x 15000075
  FILEDEVICE partition = C:
  FilePath \hiberfil.sys
  bootmenupolicy Standard
  debugoptionenabled No.

  Windows memory Tester
  ---------------------
  identifier {memdiag}
  partition Device = \Device\HarddiskVolume3
  path \EFI\Microsoft\Boot\memtest.efi
  Description Windows Memory Diagnostic
  settings regional en - US
  inherit {globalsettings}
  BADMEMORYACCESS Yes

  Settings of the EMS
  ------------
  identifier {emssettings}
  bootems No.

  The debugger settings
  -----------------
  identifier {dbgsettings}
  DebugType series
  DEBUGPORT 1
  baudrate 115200

  Defects of RAM
  -----------
  identifier {badmemory}

  Global settings
  ---------------
  identifier {globalsettings}
  inherit {dbgsettings}
  {emssettings}
  {badmemory}

  Boot loader settings
  --------------------
  identifier {bootloadersettings}
  inherit {globalsettings}
  {hypervisorsettings}

  Parameters of the hypervisor
  -------------------
  identifier {hypervisorsettings}
  hypervisordebugtype series
  hypervisordebugport 1
  hypervisorbaudrate 115200

  Resume loader settings
  ----------------------
  identifier {resumeloadersettings}
  inherit {globalsettings}

  Device options
  --------------
  identifier {9619ad33-fac6-11e4-bf22-8b60e97cdca5}
  Description Windows Recovery
  RAMDISKSDIDEVICE partition = \Device\HarddiskVolume2
  RAMDISKSDIPATH \Recovery\WindowsRE\boot.sdi

  C:\Windows\System32 >

• Windows trackpad 10 - yoga 12 thinkpad problems

  I have upgraded to Windows 10 and gestures is on my Thinkpad Yoga 12 no longer works. Same mouse movements simple are smoother. Does anyone know how to fix these problems or I need to install any drivers? Thank you!

  
  

• No windows XP cd and I have unmountable boot volume problem

  I don't have a Windows XP CD, I lost it... how I can get a CD so I can try to solve my problem of "unmountable boot volume"? Do I have other options?

  Hi EricaMetzler,

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  You will need to check the hard disk for all errors for which you need the Windows XP installation CD.

  Unfortunately, Windows XP installation CD is no longer available for sale, you can contact any local store tech or you can check eBay or Amazon, they have all copies left.

  Unmountable Boot Volume

  http://support.Microsoft.com/kb/555302

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

  http://support.Microsoft.com/kb/297185

• volume problem

  Hi I have a problem with my rocket because I downloaded a new firmware the volume control that allows you to set between normal and high disappeared somehow! Is there a solution to this?

  Big - do a factory reset and then choose your region in the rest of the world as opposed to the EU or Yankee land!

• Sansa clip volume problem with 'clipping' or 'pop' - when it is connected to the car radio

  I have two Clips Sansa (2 GB and 4 GB) and that both exhibit the same behavior.  When you listen to the Clips with a helmet, all right.  However, when I connect the clips on my car stereo (using a cable miniRCA to the dashboard stereo) Clips will play OK but the problem is due to the noise of road etc, should I increase the volume on the stereo of dashboard and Clips.  However, when I do that, at some point, the Clips will be 'clip' or 'pop' when the noise gets to a certain level.  I tried to change back and forth between normal and strong volume and also played with the equalizer with no effect.  My car stereo volume is thus contributed to the maximum.  This is a real problem because it is virtually impossible to listen to the Clip when driving (especially with podcasts or audio books where sometimes the voice is low, then I need to turn up the volume).  Is there some kind of limiter built into the Clip?  If so, is it possible to disable it?

  Thank you!

  I don't know how you are set up exactly, but try another cord to connect to the car. It can be such a thing as the cord you can not handle put it.

• Headphone and speaker volume problem. Volume is not stored.

  I have the Helix i5 and the problem I have is that when I plug in my headphones, the volume does not automatically adjust. If my speakers are at full volume, so are my helmet when I plug them in. Please help me solve this problem. My Microsoft Surface never had a ridiculous topic like this.

  Try.

  Panel--> HW & Sound--> Realtek HD Audio Manager

  On the top right side, press "Device avancΘs".

  Choose mode multistreaming

  For me this unlocked separate volume sliders to the speakers and headphones

• MS Sidewinder X 6 volume problem.

  Hi, I have a problem with my keyboard, Sidewinder X 6 and IntelliType in WIndows 7 x 64.

  Sometimes, when you turn the volume upwards or downwards, "stuck." In other words, it is going upwards or downwards and stays there. The volume bar is displayed in the lower right and won't go away.

  It is possible to use the mixer to the systray and drag the volume, but as soon as you mouse up, it goes back up/down by itself!

  To reproduce this, I have play 10 to 15 seconds to the maximum with the volume and then is suddenly becomes blocked to max or min.

  Now, I had 2 Windows installation where it spent, I got v7.x and now IntelliType v8.x, I even unplugged the keyboard while the volume is stuck (so I would say that software gets stuck...) or uninstalled drivers completely, but the same behavior.

  This only happens to me if I use another keyboard or I control the volume with the mouse by the mixer.

  Now, where is the problem causing its annoys me greatly... Oh, I forgot to mention, the ONLY way to not stuck volume is to restart...: (.)

  Help, please.

  Hi Crocodilu,

  I suggest to perform a clean boot to see if it is possilble that another program is in conflict with the volume control:

  http://support.Microsoft.com/kb/929135

  You said that to keep it up question thanks to a new installation of a new operating system.

  If there is a damaged or missing file, the origin of the problem, the new installation of Windows 7 would have solved it.

  You also stated that if the Intellitype software is running or not, the problem persists.

  You have tested the keyboard on another system and it works.

  What remains is the possibility that a 3rd party software causes a conflict.

  When you perform the clean boot, just go right by reproducing the issue with as little ranging from software as possible.

  This should help us to isolate the cause.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What o d can fix bad volume problems? I don't know how to do that is to ask.

  I get it;

  Maintenance of the system.
  Restart the computer to fix the problems of volume such as bad sectors, lost clusters, reticulate files and directory errors.
  Screenshot: http://i1084.photobucket.com/albums/j420/maxi107/Random/1_zps3e42ee39.png
  What should I do? I restarted the computer, but it is still at times. I thought that the reboot was identical at the reboot.
  I didn't tell me how to do this.

  Hi Ren,

  To provide the proper resolution, I would need more information on your side.

  1. when, exactly, you get this error message?

  2. What is the brand and model of the computer?

  This problem may occur if there are bad sectors on the hard drive.

  I suggest you to run the disk check to repair bad sectors on the hard drive. Check if it helps.

  Check a drive for errors
  http://Windows.Microsoft.com/en-in/Windows7/check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Volume problem while watching videos

  Flash player 11.8.800.94, Windows 7 (64-bit), Internet Explorer 10.

  Updated to the latest version of flash player, my volume is too low while watching a video on youtube for example, same problem with twitch.tv, dailymotion.com, etc.

  I need to adjust the volume on my speakers almost to the maximum if I want to hear anything of the video, when I uninstall flash player, the volume is normal again, equal to my standard volume of my pc.

  I reinstalled the flash player, but the problem remains.

  I also did anything for IE 10 _ http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_Flash_Player information

  Is there a solution to this problem?

  Welcome them

  Have you checked your windows 7 volume mixer?

  It is probably this bug.

  https://BugBase.Adobe.com/index.cfm?event=bug&ID=3590220

• Volume problem case-sensitive Mac installing

  When I try to install the trial version of Production Premium on my Mac, the following message appears: "we met the following problems.

  Installation on volumes that case sensitive is not supported. Please select a different volume for the installation. »

  I tried dragging it in many places on the hard drive and on the desktop, where is he anyway? What is a volume? What is the 'case-sensitive volume' and how can I find one that is not case sensitive?

  Saluti

  You will need to format your drive to a sensitive file system without respect.  You will find details additional to install error "Unsupported of disks case-sensitive" or similar. Mac OS - http://helpx.adobe.com/creative-suite/kb/error-case-sensitive-drives-supported.html.

• Volume problems

  Hello

  So my volume does not work. That's what I see every time I try to increase the volume upwards or downwards.

  What can be done to fix this?

  have you checked in  - System - Sound Preferences?
  If the mute box is not checked it try this

  Create a guest account or a secondary account and sign in

  See if the sound works

  If that's the case - then, it's a bug of software

  If you get the same screen then you probably need to make an appointment 'Genius' on an Apple Store, or go to another authorized service provider.