Yoga 3 14 inch touchscreen issues

Similar Questions

• Yoga 2 Pro micro-HDMi issue RESOLVED

  I've had my Yoga Pro 2 for about a week now. Slow adaptation to the ins and outs of the device. Recently acquired a micro HDMi to HDMi adapter to connect the 2 Yoga to my TV. Needless to say I was a bit dismayed when I noticed that the adapter worked, but only if I tugged on the connection (toward the front of the machine). When I let go, disconnect the screen and I have no picture. This angered me a little. I read a little about other people having the same problems.

  I slept on the issue of a night and then in the morning, I decided to take things into their own hands. A caught a nail file I had laying around and shaved about the width of a thumb to the end of the micro-HDMi connector nail file. I could hardly see any difference in the cable connector. Then I tried to plug it in and voila. No problem whatsoever. Tried fishing the connector to the rear, low, high, before. Without interruption...

  I know it's a little frustrating, but I like the rubbery feel of the Yoga 2 body and was ready to do a few TWEAKS to make it work. A took about 5 minutes total. Now am happy once again...

  This gives a try if you have a problem with the connection.

  Just thought I'd share...

  lootzius

  

  You are welcome...

  I wasn't ready to give up, I really like this Y2P so far. And it was boring but if the fix is easy and even I can do it, then you know...

  See you soon...

• Sony Vaio faucet 11 - random touchscreen issues

  I bought a 11 Tap Sony VAIO (model SVT11213CXB number) and actually have experienced a similar problem with the touch screen as owners of Duo, but with the mouse cursor goes to the top right (instead of the left) of the display in landscape mode and clicking randomly.

  When I bought water from the tap in November, I updated the drivers and BIOS via Vaio Update, ran all the updates of Windows and then upgraded to Windows 8 to 8.1. All updated without problems or errors during the installation. The touch screen seems to randomly occur after the upgrade, but I must confess that I didn't have the tap water well before the upgrade to 8.1. If the question was probably there before the upgrade. I also ran all the patches from Microsoft for the Windows 8.1 "lousy mouse" question and still no change.

  After a lot of troubleshooting and research, I narrowed down it to the following:

  Problem driver or firmware 1.)

  IR or RF interference) 2

  3.) related material

  #1 seems the most likely in the Duo many owners have argued that the problem has been resolved by installing the N - Trig Duo feel software and drivers.

  http://Forum.TabletPCReview.com/Sony/55222-Sony-VAIO-duo-11-touchscreen-screen-problems.html

  But when I run the installer it errors saying that "N-Trig hardware was not detected. I thought then that maybe the update of the modified BIOS 12/17 watered the N-Trig firmware and the touch input was handled only by integrated Windows Pen and Touch. Mainly because the devices and Program Manager installs don't list anything marked "N-Trig. But I went to our Sony store and drivers listed for their display unit is the same as my config. A couple of owners of Duo set out this thread they encountered the same error. The N-Trig support forum suggests that cases where you receive this error during install it to contact the manufacturer of the device. But they only software and drivers for Windows 8 and not 8.1, so this could also be the cause of the error when installing (compatibility mode does not work).

  #2: I couldn't really test the theory of IR sensor that I can not understand how to turn off the sensor? It is possible that the sensor could be picking up interference and causing the random input touch screen (the Duo also has the IR sensor?). However, (with the selected hidden devices) Device Manager does not list an infrared device, only devices and printers or Vaio Control Panel? There are drivers that are installed, even if apparently it controls our fine TV using remote app from Sony. I guess I could just cover the sensor with tape, but I was hoping to avoid getting the sticky tape on the cover of my tablet.

  RF interference could be a possiblity, but doubtful. The tap water and the Duo have the same power to my knowledge card (I do not use a 3rd party power adapter, I use a Sony supplied with the appliance). However, I tested this theory just now leaving the Tablet unplugged during use and I still encountered the problem. I also tried it away electronic nearby, including my iPhone, but still no change. I thought also keyboard and mouse wireless, the tap water was the issue, but turn it off while the cursor is by clicking at the top right of the screen does not occur. External mouse and keyboards do not solve the problem either (without wireless, wired or bluetooth). I could not reproduce the problem on the touchscreen in the case, sometimes just at random and generally lasts no more than 10 seconds when it does.

  I had to move my taskbar to the top of my screen so that it does not close the window of program or browser that I work and instead just opening the window date and time repeatedly.

  I really hope this isn't #3 I have not had the time unit and will not exchange it for another and will not bother to send it in for repair. Especially since the owners in other threads Duo have had their screens replaced, only to have the problem reoccur. The owners of duo have also tried a full system refresh, only to have the same problem, so I'm not bothering with this track that I don't want to have to reinstall all my software again, reactivate licenses.

  Return to Best Buy holiday window expires on Jan 14, so if I don't get a response from Sony or get this resolved before then I'm probably just to take it back. I'm past an Apple Macbook Air for the tap water and even sold my Mini iPad I wanted a true all-in-one device. I was also counting on exchanging my iPhone against a Xperia from Sony Z1, but I'm hesitant examining the issues I'm having my first purchase of Sony.

  Overall I really like the direction that Sony goes with their products and want to stay with them, but I have to admit that the quality of the devices Apple and their response to the questions related to the products is currently unmatched. I hope Sony can deliver the same question, but I'm skeptical that a few discussions about this with the Duo go back to 2012, early 2013 with still no resolution or definitive answer as to why the Support of Sony.

  Yes, quite the question. It's probably an electrical interference or software. Out of curiosity, have you tried to test whether or not it engages with and without power cord? This seems like one of the things isolated by a few people then allows to rule that, at the present time. Second would be if you tried to calibrate the screen? There are instructions on how to do it here: https://us.en.kb.sony.com/app/answers/detail/a_id/37544/c/65%2C66/kw/37544.

  Let me know what happens and I'll see what we can do from there. Sony is a great place to get electronics but hiccups occur. My Duet works well and I didn't so far no problem with the touch screen.

• Sony Vaio Pro 13.3 inch touchscreen: touchscreen not working not

  Hello

  Suddenly, the touch screen for my Sony Vaio 13 Touch Pro works two days ago and I have no idea how to solve this problem. I didn't install anything new before it stopped working and I tried to install new drivers on the VAIO update, but it still does not. I thought that it would be because of Windows, so I've updated to 8.1 Windows today and it still does not work. "On the PC info it even says" Pen touch abd: no pen or touch input is available for this view. but this laptop is supposed to have touch capability and it has worked so far.

  Help, please! My model number is SVP13215CDB. Do I need to install or update my driver?

  Hi Nick,

  Thank you for your answer, but I did as you said and installed this driver and nothing has changed... The search option did not show a Tablet PC settings and PC info always says "no pen or touch input is available for this view". And thanks for the compliment =) I did on site for reasons to ask this question.

• Upper left touchscreen issues

  I have been having problems lately with the upper left corner of my screen touch not resonding. You don't notice it until you try to access an application. Here is an example when I go to the game store and try to get into the settings area bars trhee in the upper left corner, it does nothing. I have to restart my phone every time and it works for awhile then I start having questions again. I was wondering if there was a way to recalibrate the screen to see if there's a glich. Any help would be appreciated. It does this with all that you have to use the touch screen in the upper left.

  
  

• Touchscreen issues Dell Inspiration 3521

  OK, so there's my spec

  Service tag ADMIN NOTE: maintain the label removed by privacy policy >

  Express service code ADMIN NOTE: kidnapped by the Express service code privacy policy >

  Computer model Inspiron 3521

  BIOS Editor Dell Inc.

  BIOS version A14

  Date of the BIOS 07/31/2015

  OS version Microsoft Windows 10 Pro

  Manufacturer Intel Core i3-3217U CPU @ 1.80 GHz

  Clock speed 1.8 Ghz

  L2 Cache size 256

  Type
  Description

  CD-ROM/DVD-ROM readers Microsoft Virtual DVD-ROM TSSTcorp DVD +-RW SU-208FB

  Disc players Hitachi HTS723232A7A364

  Graphics cards GPU Intel(r) HD 4000 AMD Radeon HD 7600M series

  IDE ATA/ATAPI controllers Standard SATA AHCI Controller

  Keyboards, mice & pointing devices Mouse Compatible PS/2 Compatible mouse HID

  Monitors Generic PnP monitor Default monitor

  Sound Devices Realtek High Definition Audio Intel(r) Audio display

  USB controllers Intel (r) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft) Family of chipsets Intel (r) 7 series/C216 USB Enhanced Host Controller - 1E2D Family of chipsets Intel (r) 7 series/C216 USB Enhanced Host Controller - 1E26

  MY question is - is it possible to relpace a normal display for a touch srceen? (or do I already or I don't know...) Please help as soon as possible I really need to know ;)

  The 3521 had both touch and non touch through his life - if you do not have a glossy screen glass panel, yours is not touch.

• Google is starting to roll out Android 5.0 (Lollipop)... Lenovo series of Yoga will receive the update?

  Hi all

  I see that Google has started rolling updates for Android 5.0.

  Recently I bought Yoga 2 8 inch tablet, so I was hoping if Lenovo will provide us with the new Android update?

  I hope that they should be good for us.

  Concerning

  PM

  
  

• Yoga 2 inches 11 cost of out-of-warranty battery replacement

  How much does it cost to replace the battery for the new Yoga 2 11 inches when you are out of warranty? Batteries die within 1 or 2 years about and at this time there, you're also out of warranty the standard warranty of 1 year. I'm looking into buying a portable Yoga 2 11 inches and a part of the decision-making process between this and other brand of PC or Macbook is how much it would cost to replace the battery, since it is a non-replaceable by the user stack. I know that with Apple, it's $ 129 to replace the battery. This information is readily available on the Internet. However with Lenovo, this information is not available everywhere.

  I have already contacted on the phone the Sales Department, which is unclear and transferred me to the tech Department, who told me that the parts or sales would have that information. When I told them that the sales referred me to tech, I was transferred to pieces. Parts told me that they need the serial number to give me an accurate price on the drum part, but since I don't, I told them that I'm interested in the Yoga 2 11 inch model to which they said they can't give me a price because they cannot know with certainty what is the part number. Yet once I tried sales, this time via online chat, and once again, they have no information and referred me to tech or contact a lenovo reseller.

  So nobody knows how much a battery replacement cost? Somebody should know since I do not know those charged to get their battery replaced some time down the line. I think it's a simple question, how much does it cost to replace a battery for the battery and work when you are out of warranty? Thank you

  Hello

  part numbers, you will need are 121500224 (lg) and 121500223 (simplo). for the price, I suggest you call again support.

  I hope this helps.

• How can I control external devices using a stand-alone touchscreen with a LabVIEW app

  For my senior project my group design and created a vehicle for extended range hybrid with 90 Li + battery which is charged by a 15 kW generator and/or who is also charged by a 5 kW fuel cell. Currently, our system is able to measure the tension on batteries and display them on a laptop via LabVIEW. To process these data, we use a cRIO FPGA. What we would like to do now, is having a touch screen for the pilot to choose which loads of source of battery power so that monitor a pressure reading from the fuel tank.

  What kind of touch screens to LabVIEW to be downloaded on and used for controls?

  A cRIO has the necessary capacity to supply such a screen and handle the transfer of the data from the sensor fuel and relay (for turning on and off will deepen)?

  Do I need an additional license to create stand-alone applications and how I would go about creating a stand-alone application?

  Sorry for the question as much. Any help with the answer. Thank you!

  This looks like a very interesting project.  If you are interested, National Instruments organizes an contest of Design student where you can win cash or a trip to Austin for NIWeek.

  steve215 wrote:

  What kind of touch screens to LabVIEW to be downloaded on and used for controls?

  NEITHER sells computers touch screen that can be used to control LabVIEW applications.  You can find more information here: HMIS and industrial touch panels and here: LabVIEW Real-time and Touch Panel Deployment and replication resources. Our computers 6-inch touchscreen , run Windows CE, programming on them is a little different from the programming on a full Windows operating system.  You can find useful getting started with LabVIEW Touch Panel Module .

  You can use third-party with the LabVIEW Touch Panel Module devices, although it takes a deployment license for it.  More information can be found in the getting started guide.

  If you were able to send the information of cRIO on a network (which according to your description, seems unlikely), you can use a smartphone to control your application.  More information on our community of Smartphone group.

  steve215 wrote:

  A cRIO has the necessary capacity to supply such a screen and handle the transfer of the data from the sensor fuel and relay (for turning on and off will deepen)?

  If you use the 6-inch touchscreen panels, they need 18 to 32 VDC (the fuse becomes an open circuit if the input level exceeds 33 VDC).  The transfer of data from the switching relay can be monitored and changed with the touch screen.

  steve215 wrote:

  Do I need an additional license to create stand-alone applications and how I would go about creating a stand-alone application?

  If you have traveled the road of the touch panel, you need to purchase the LabVIEW Touch Panel Module and a touchscreen.  Touchscreens OR have a touch panel deployment license.  Guides step by step to create the stand-alone application are in the getting started with LabVIEW Touch Panel Module .

  Kind regards

  Elizabeth K.

  National Instruments | Sales engineer | www.NI.com/support

• Major problem with the touch screen after upgrade Windows 10

  I bought a Lenovo Yoga 3 14 "a few weeks ago and upgraded to Windows 10 as soon as I got it.

  Since I started using it, the touchscreen will be occaisionally go "crazy". Crazy is the best way I can describe it because it will start input touch by ignoring or doing his own random touch input on the screen. Nothing the laptop will start to switch between windows and opening and closing of the things.

  This laptop is not running Windows 8.1 long enough for me to know if she has had this problem before the upgrade.

  Any ideas?

  Nice day.

  For information, please see: https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-3-14-inch-Touch-Screen-Issues/td-p/20...

  and then more precisely: https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-3-14-inch-Touch-Screen-Issues/m-p/214...

  I hope this helps.

  Kind regards.

• Companion Update critical system updates towers infinitely

  Hello. Title says it all... This has been a problem many months now... Still happening in my laptop Lenovo Yoga 500-15ISK

  This issue seems to be fixed after the last update of companion

• I hate this lollipop

  Please im sick of this os, I want to return to kitkat where can I download it? im sick of trying to listen to my music online and it keeps refreshing. does not not all app permissions. fewer options camera. the drop-top. less battery. He hates. need os for the yoga 2 10 inch tablet please

  Well on my Galaxy S Plus, downgrade, you will need to repartition via TWRP or CWM. in any case I would not try anything on Intel cpu, even root or custom recovery atm.

• Speed of RAM for my laptop

  Hello

  I'm looking to upgrade my RAM in question to be DDR3, but I'm not sure how fast is it? My laptop model is HP Pavilion 14-n019nr 14-inch touchscreen laptop. Please suggest.

  It's

  DDR3L-1600 MHz aka  PC3L-12800

  This means memory low voltage 1.35 volts like this:

  http://www.crucial.com/store/partspecs.aspx?IModule=CT2KIT102464BF160B

  http://www.crucial.com/store/partspecs.aspx?IModule=CT2KIT51264BF160B

  Here is the Service Manual:

  Manual

  See page 44.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Impossible to pass to an SSD?

  OK, so I just bought a HP 15-inch touchscreen car braidja color blue. After I installed an SSD, I get a BOOT DEVICE NOT FOUND.

  I rund the hard drive test and pass it. So I call HP and the guy said that my laptop cannot be ugraded with a SSD?

  I assumed all justt what came out in 2014 could be upgraded to an SSD?

  Any help would be great. Tahnks

  No you can't do it this way. Put the hard drive in the laptop and make the HP recovery disks. Use it to restore Windows 8.1 on the SSD.

• video and grainy images

  I recently started to use the camera on my Lenovo PC's Yoga and the images and the video several times not to go out grainy. Is there a solution to create clearer images and videos?

  I recently started to use the camera on my Lenovo PC's Yoga and the images and the video several times not to go out grainy. Is there a solution to create clearer images and videos?

  =======================================
  I assume you mean a webcam? There are opportunities
  It's a low resolution camera and there is not much
  you could do to improve.

  Granular can also result in low light environments.

  Also, I suspect that the camera has a lens made of plastic
  and they are not as sharp as a glass of good quality lens.

  The following discussion seems to be the same camera
  you make reference to:

  Problems of quality of camera video yoga 13
  http://forums.Lenovo.com/T5/IdeaPad-IdeaTab-Slate-tablets/Yoga-13-video-camera-quality-issues/TD-p/991189