Yoga 3 14 - parts Confusion

Similar Questions

• Cannot turn off Program Compatibility Assistant

  I hope someone can provide me with a way to disable the program compatibility Wizard. I had this same problem in the Beta, but of course during the beta test I used Windows 7 Ultimate. First off I would like to start by pointing out that I do run with Windows 7 Home Premium.

  That said, I know that this means that the most common solution, using Local Group Policy Editor to disable the program compatibility Wizard won't work, as the Home Premium does not gpedit.msc.

  Now, this is the part confusing, at least to me. I found an alternative solution specifically designed to fill this gap. I was directed to the access to Servicesand localization Program Compatibility Assistant Service, stop the service and then turn it off (via the properties for this service). I did exactly that. He is arrested and the Startup Type is "off". I even rebooted.

  Now here's the part that confuses me... it always comes back. How can he do that when I have the service stopped? This is another aspect of the security of Windows 7 I am not aware of this must be disabled?

  As a note, when I tried to install the software in question, I chose "Run as Administrator", just in case, and who didn't yet have any advantage. If anyone knows what I have to do, including instructions on changing my recording, let me know. Thank you.

  Hi Mobius187,

  
  I'm afraid to say that in Windows 7 Home Edition Premium, it is not possible to disable this feature.
  The only way to turn it off is by using the Group Policy Editor.
   
  Program Compatibility Assistant: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-questions
   
  Hope that answers your question.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MIC not record not his? Help!

  Hello!

  I just bought a new microphone logitech for my laptop (a Dell Inspiron 6400) so when I got home I plugged in (to the mic jack) and decided to test it first on the tape recorder on xp program.  But when I played it back after the record there was no noise at all & even when I haven't saved once again there was no sound waves indicating that my voice has been detected: S I looked around all night trying to find a solution, but nothing has worked so far!  I read a post at some point, saying that it might be my drivers sound card or something?  My driver/soundcard (sorry this part confuses me!) called SigmaTel Audio Codec.

  Help, please!

  Thank you! :)

  
  

• Question of PGA

  Hello

  Oracle 11.2.0.3.0

  I have memory_target = 15G

  That is why in the database, pga_aggregate_target = 0

  But I can see from v$ pgastat, aggregation PGA target = 5637144576 parameter = Mo 5673 .

  Statspack shows

  Statistical memory Begin End

  ~~~~~~~~~~~~~~~~~                ------------ ------------

  Host Mem (MB): 31,440.3 31 440,3

  Use of LMS (MB): 15,291.4 15 291,4

  PGA use (MB):                          1,722.1      1,698.8

  Host % Mem used for SGA + PGA: 54.0 54.1

  PGA Aggr target histogram DB/Inst: PIVR01/PIVR01 snaps: 8610-8612

  -> Optimal performances are purely in memory operations

  High low

  Execs Total optimum optimum optimum Execs 1 pass Execs M-Pass Execs

  ------- ------- -------------- ------------- ------------ ------------

  2K      4K                     5,036          5,036            0              0

  64K    128K                       14               14            0              0

  128K    256K                      78              78             0              0

  512 K 1024 K 174 174 0 0

  1M      2M                      164            164            0              0

  4M      8M                           4               4             0              0

  256M 512M                      2               1             1              0

       1G      2G                             2               0             2              0

  
  

  Memory PGA Advisory DB/Inst: PIVR01/PIVR01 end Snap: 8612

  --> When using automatic memory management, choose at least a value of pga_aggregate_target

  where Estd PGA Overalloc Count is 0

  Estd estd Extra

  AGGR PGA W/A MB time Estd Estd PGA PGA

  Target size W/A MB read/written to deal with Cache Overalloc

  Factr EST (MB) treated disc bytes (s) % number of access

  ---------- ------ -------------- -------------- ---------- ------ ----------

  672 0.1 427 978 214.7 522 063 45.0 3 481

  1 344 0.3 427 978 514 547 213,0 45.0 3 320

  2 688 0.5 427 978 90 681 117.2 83,0 0 * advised a minimum size to fit all executions in memory        

  4 032 0.8 427 978 84 797 115.9 83,0 0

  5 376 1.0 427 978 115,3 82 105 84.0 0 * size current target which we fail to

  6 451 1.2 427 978 114,0 76 674 85.0 0

  7 526 1.4 427 978 114,0 76 674 85.0 0

  8 602 1.6 427 978 114,0 76 674 85.0 0

  
  

  1. why PGA memory grows no more than 2 GB to cope with this and be able to run the SQL all in memory, even if the target is set at 5673 MB?

  2. do I need to manually set pga_aggregate_target = 2688 M with memory target = 15 G?

  
  

  Thanks for your time
  

  1938071 wrote:

  I got your point, but the bottom implies that there is 2 SQL executions which do not completely held in memory of the PGA and must be partially exchanged on temporary slow disk. The size of the book that does this is between 1-2 GB.

  So if I 5673 MB allocated total setting target PGA in v$ pgastat, why is he not use it... This part confuses me

  Target histogram Aggr PGA

  -> Best executions are purely in memory operations

  High low

  Execs Total optimum optimum optimum Execs 1 pass Execs M-Pass Execs

  ------- ------- -------------- ------------- ------------ ------------

  2K      4K                     5,036          5,036            0              0

  64K    128K                       14               14            0              0

  128K    256K                      78              78             0              0

  512 K 1024 K 174 174 0 0

  1M      2M                      164            164            0              0

  4M      8M                           4               4             0              0

  256M 512M                      2               1             1              0

       1G      2G                             2               0             2              0

  The pga_aggregate_target did NOT previously assigned, it is a (soft) limit on the total memory that can be allocated dynamically. Given that you have defined the memory_target to 15 GB, Oracle can only grow the total allocation of the PGA to 5G by reducing the rest of its endowment (in large part the shared pool and the buffer cache) to 10 GB.

  It is a necessary part of the algorithm of automatic memory management that it would decide if the time saved by the growth of the component of the PGA is greater or less than the time lost by the decline of the shared pool and the cache buffers.  You could imagine that doing a few GB of bed and writes temporary files for one or two is probably much faster that 2 GB buffer cache dumping and ending with a large number of random to block reads as a side effect.

  -If you have a CPU bottleneck then hit a very large size on disk may be the best use of resources: large sorts in memory can we a lot of CPU.

  Concerning

  Jonathan Lewis

• Problems tutorial

  I'm looking to start immediately on Adobe Flash CC 2014, but there is a problem. I don't know how to use it! I use a Mac OS and the courses are made with a PC. I know that there should not be much of a difference, but counting the little things. Simple parts confuse me, although many times I find myself in the situation to spend more time I should just to rename a layer! I looked, and it feels as if I can't do what they tell me. I am getting discouraged, and some help would be very appreciated!

  Please check if this helps:

  https://helpx.Adobe.com/PDF/flash_reference.PDF

  Concerning

  Baudier

• Why dreamweaver wants to replace my existing css file when you create a new page

  I created a Web site and I can not dreamweaver to accept my existing css file when I create a new page in the same Web site.  I click on file, create new page, I select page fluid and in the lower right, click on the link to an existing css file and click ok, but dreamweaver tells me so my css file does not exist and wants to replace my existing css file? What's happening?

  Thank you guys for this report we

  It's a little surprising that it is the way it is for a while now. Rather than create a fg with the attached css html, DW invites you to create a new css / replace the existing one. Why?

  The part confusing here is that the "css Attach leader"offers two options.

  1. fix like a normal CSS

  2. attach like a css FG

  If you check the preference to "Join as fluid grid CSS" (see attachment) you should not see this question.

  

  that is, unless you attach the css like a css FG, DW treats like any other css and waiting for you to bind one another css FG

  However, I'm too confused at first until I realized the difference. Hope this helps

  And thank you for bringing this to our notice

  .. Henin :)

• Join the execution of several Tables Plan

  Try to understand the query execution plan:
  

   
  
  HR>  SELECT e.last_name , d.department_name, l.city
    2     FROM employees e, departments d , locations l
    3     WHERE e.department_id = d.department_id
    4   AND
    5           d.location_id = l.location_id;
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 1235509609
  
  --------------------------------------------------------------------------------------------------
  | Id  | Operation                     | Name             | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT              |                  |   106 |  4346 |     9  (23)| 00:00:01 |
  |*  1 |  HASH JOIN                    |                  |   106 |  4346 |     9  (23)| 00:00:01 |
  |   2 |   MERGE JOIN                  |                  |    27 |   837 |     6  (34)| 00:00:01 |
  |   3 |    TABLE ACCESS BY INDEX ROWID| DEPARTMENTS      |    27 |   513 |     2   (0)| 00:00:01 |
  |   4 |     INDEX FULL SCAN           | DEPT_LOCATION_IX |    27 |       |     1   (0)| 00:00:01 |
  |*  5 |    SORT JOIN                  |                  |    23 |   276 |     4  (50)| 00:00:01 |
  |   6 |     VIEW                      | index$_join$_003 |    23 |   276 |     3  (34)| 00:00:01 |
  |*  7 |      HASH JOIN                |                  |       |       |            |          |
  |   8 |       INDEX FAST FULL SCAN    | LOC_CITY_IX      |    23 |   276 |     1   (0)| 00:00:01 |
  |   9 |       INDEX FAST FULL SCAN    | LOC_ID_PK        |    23 |   276 |     1   (0)| 00:00:01 |
  |  10 |   TABLE ACCESS FULL           | EMPLOYEES        |   107 |  1070 |     3   (0)| 00:00:01 |
  --------------------------------------------------------------------------------------------------

  So he needs to MERGE between DEPARTMENTS (that has been sorted by index) JOIN and (here's the part confusing...) LOCATIONS including oracle used HASH JOIN (?) to bring the information from and then sort the opinion generated by the system that has been created...?
  
  Is that this HASH JOIN to step 7 only refers to a view that is generated by the system that oracle had to sort and not actually HASH JOIN
  between two tables?
  
  Thanks much for you patience

  Hello

  Perhaps, it helps to understand things better if we walk in the plan.

  Plans have a hierarchical structure (which is translated graphically by fingerprints). Operating needs parent all the children completed operations before it can do its job (which is generally combining lines with children in one way or another).

  Another point is that joins can have anything like their entries, tables not only. That is a hash join can join an index for an index or a table to an index, or then to join a table results of hash one another and so on and so forth.

  With this in mind, we can go back on what is happening here step by step:

  The needs of the join by hash (1) (2) and (10) to finish. (10) is a basic operation, since a table scan depends on nothing else, but merge join handset (2) (3) and (5), who both are complex operations (i.e. dependent on one or more children). Specifically, lines (3) from the DEPARTMENTS table using ROWID obtained from a full analysis of the index of DEPT_LOCATION_IX (4), (5) is simply lines join hash (7) and sorted in the order required.

  I hope this helps.

  Best regards
  Nikolai

  Published by: Nikolay Savvinov on January 26, 2012 05:26

• Download images and saving them to a folder

  Well Hello, this is my first topic here in the oracle forums and I m already ask something, sry, but I really need help on this topic.
  
  I am currently working with Oracle database 10g XE with Apex 4.0 x.
  
  So here go us:
  
  I m trying to make application to the Apex where users will be able to download pictures and store them in a folder is desired on the server. I have red little son here and I found this.
  
  1. create FileBrowse point in Apex
  2. check the PLSQL processes that will take the images downloaded from WWV_FLOW_FILES and store them in custom table (allows to call IMAGES). After this step, we have our images stored in the table of the IMAGES on the server.
  3. now this is the confusing part, I want to be able, on the client side, see the list of folders already created on a server, or be able to specify the name of the folder and then call some PLSQL (or something else) to create this folder.
  4. after that, I saw that there are many ways to recreate the images and store them in the specific folder (created or specified in step 3 by customer) http://apex.oracle.com/pls/otn/f?p=31517:LOGIN:1753086653679135
  5. This is also part confusing: where should I create the main folder (the folder where all other records will be kept) so that I can access it using the application (purpose: image display)
  For example, when you create a Web page by using html, if I wanted to access some image files I would fix his way relative index.html.
  
  Lets say i m looking for the end do not code, I just want some advice in order to continue my research, or be able to understand this concept a little better because I m new to this.
  
  Thanks in advance.
  
  Published by: on January 24, 2012 910011 15:00

  With PL/SQL, you can create using UTL_FILE files, but not files.
  But using DBMS_SCHEDULER, you can run 'external' jobs... what could be a sort of "mkdir" command (see http://psoug.org/reference/dbms_scheduler.html)

  But think about it... I don't know that dbms_scheduler is available in XE...

  So something like the XFILES, using the built-in features XML - DB can be an elegant solution as well. You can even grant access to the XML - DB by using WebDav repository, it looks just like a folder on your network in windows Explorer.

  (Thanks for the plug XFILES, Mark)

• Queries in both tree meaning

  Hello
  
  Could someone please help with me a tree looking? I'm looking for using the two CONNECT BY PRIOR and using a IN / Recursive query/DEPTH FIRST and can return the entire tree in both cases, but it can not filter the way I like.
  
  I need to go back to a complete structure of the tree where a similar game is done on a name column. The data would look like
  
  manId | empID. name
  1 Paul
  1 2 Kara
  1-3 Matthew
  1 Bill 4
  2-5 Gary
  2 Paul 6
  3 7 Sally
  3 8 Sarah
  4 9 Jill
  4 10 Sarah
  
  so the structure is
  
  -1. Paul
  -2. Kara
  -5. Gary
  -6. Paul
  -3. Matthew
  -7. Sally
  -8. Sarah
  -4. Bill
  -9. Jill
  -10. Sarah
  
  and I would like to be able to pick up where lower (name) like ' % of sarah "and return the following:"
  
  -1. Paul
  -3. Matthew
  -8. Sarah
  -4. Bill
  -10. Sarah
  
  Similarly, I would like to be able to search where lower (name) like ' % Matthew ' and returned the following:
  
  -1. Paul
  -3. Matthew
  -7. Sally
  -8. Sarah
  
  Thank you very much

  Hello

  876906 wrote:
  ... I need to go back to a complete structure of the tree where a similar game is done on a name column. ...

  This part confuses me. Do you want the complete structure of the tree, or do you want only certain nodes?

  and I would like to be able to pick up where lower (name) like ' % of sarah "and return the following:"

  -1. Paul
  -3. Matthew
  -8. Sarah
  -4. Bill
  -10. Sarah

  It seems that you do not want the full tree: only some of the nodes. In other words, you only want nodes with a certain substring in their names, and the ancestors and descendants of those nodes.
  In this case, start by finidng the universe of the nodes you want (using top-down and bottom-up requests), then ask that result set. For example:

  WITH     universe     AS
  (
       SELECT     manid, empid, name
       FROM     table_x
       START WITH     LOWER (name) LIKE '%' || :target_name ||'%'
       CONNECT BY     manid     = PRIOR empid
      UNION
       SELECT     manid, empid, name
       FROM     table_x
       START WITH     LOWER (name) LIKE '%' || :target_name ||'%'
       CONNECT BY     PRIOR manid     = empid
  )
  SELECT     empid, name
  FROM     universe
  START WITH     manid     IS NULL
  CONNECT BY     manid     = PRIOR empid
  ;
  

  If you would care to post CREATE TABLE and INSERT instructions for the sample data, and then I could test this.

• Help required on package compilation

  Hello
  
  We are migrating a DB R12 of AIX to the migration of Linux.After, there are some packages that are not valid.
  
  There is a package body that is not valid, and when it is compiled, it gives an error "table or view v$ BGPROCESS does not exist.
  But the same PL/SQL block is also there as part of the packet header and it compiled successfully.
  
  
  declare
  p_rowid varchar2 (30);
  Cursor rowid_cur is
  Select rowidtochar (DBMS_ROWID. ROWID_CREATE (1, S.ROW_WAIT_OBJ #,)
  S.ROW_WAIT_FILE #.
  S.ROW_WAIT_BLOCK #.
  L_rowid S.ROW_WAIT_ROW #)).
  S.SID,
  P.SERIAL # SERIES
  v $ SESSION S,.
  V$ BGPROCESS B,.
  V$ PROCESS P,.
  V$ LOCK L,.
  DBA_OBJECTS O
  where B.PADDR (+) = S.PADDR
  and P.ADDR (+) = S.PADDR
  and L.SID = S.SID
  and O.OBJECT_ID = S.ROW_WAIT_OBJ #.
  and O.OBJECT_NAME = 'nom_table_p ';
  
  number of v_sid;
  number of v_serial;
  number of v_user_id;
  Begin
  For rowid_rec in rowid_cur loop
  If rowid_rec.l_rowid = p_rowid Then
  v_sid: = rowid_rec.sid;
  v_serial: = rowid_rec.serial;
  End If;
  End loop;
  end;
  /
  
  
  Please, share your experiences on this issue.
  
  Kind regards
  Narayan

  Exactly this part confuses me, you wrote:

  But the same PL/SQL block is also there as part of the packet header and it compiled successfully.

  And then you showed us an anonymous pl/sql block... What was that address the issue?
  How PL/SQL can be part of a package of "header"? I guess by header you: the specification (which, with the body, forms the whole package). A single specification package holds statements (variables, functions or procedures), no code.
  Unless you are referring only in one of these % TYPE statements and or % ROWTYPE is used in conjunction with this view V$.

  In any case, check if the APPS has right to SELECT direct on this view V$: you can do this by querying ALL_TAB_PRIVS when you are logged in as APPS.

• Pro keyboard Lenovo Yoga 2 part number

  Sorry if this isn't in the right area, first post and I tried searching the forums for the answer. I am looking for the part number of the keyboard Lenovo Yoga 2 Pro.

  THX.

  Comment to Moderator: He moved to you.

  Good day and welcome to the community.

  See the manual page 65 of your Hardware Maintenance Manual:

  http://support.Lenovo.com/en_US/detail.page?docid=UM019262

  Many different language choices / configurations.

  I hope this helps.

• Opened and returned 6 Lenovo Yoga to at best buy. Just doing my part to help businesses of Lenovo! : D

  6 Lenovo Yoga.

  IPS 6 screens with backlight, bleeding problems.

  6 ways to stick to a shitty Chinese society.

  Enjoy your treatment and paperwork.

  

  
  

• Part number Confusion

  I have a t 1000 cto dv8 where I think that the Bluetooth radio is defective. If I find the part number in the dv8 manual it shows 577000-001 as the module and

  537921 001 as the cable

  http://h10032.www1.HP.com/CTG/manual/c01910942.PDF

  When I get these reference numbers in the "search by part number" box of HP websites, I get the total opposite.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=0220E45C820A4E2CA4F0CF546825C74C

  There is even a small picture of the Bluetooth module shown using the number, 537921-001, which contradicts totally when the manual says.

  http://h30125.www3.HP.com/csnOther/SPICatalog/photos/537921-001.jpg

  PN = 537921-001

  I know that the manual has been wrong before, when I removed the bezel hot key in the key board. He tells you rise from the nearest suite of the touch pad. It's very bad. It must start at the back and work your way around to the front.

  If someone here could clarify this.

  Thank you

  Type the PN (product number) of your CTO laptop in the search of partsurfer field and it will list all the parts available for this model.  Do not worry about the number of 'replace with' printed anywhere.

• Confusion of LCD for DV6-6110us part number

  I need to replace the LCD of the HP Pavilion DV6-6110us laptop computer.   I'm not sure of the correct reference number or if several different reference numbers can be used.   The manual indicates 640445-001 HP or HP 653378-001 can be used.  It is not clear on the question of whether the two can be used or when the other is needed.   When the disassembly of the screen on the screen part number is 666933-001.   All three can be used.  New pilots will be needed for any of them.  I already ordered the HP 653378-001 and want to be sure that it will work before you start the installation.    Thanks in advance for any guidance.

  john_a_joyce wrote:

  I need to replace the LCD of the HP Pavilion DV6-6110us laptop computer.   I'm not sure of the correct reference number or if several different reference numbers can be used.   The manual indicates 640445-001 HP or HP 653378-001 can be used.  It is not clear on the question of whether the two can be used or when the other is needed.   When the disassembly of the screen on the screen part number is 666933-001.   All three can be used.  New pilots will be needed for any of them.  I already ordered the HP 653378-001 and want to be sure that it will work before you start the installation.    Thanks in advance for any guidance.

  Hello

  You don't have to worry on the part numbers. 640445-001 is a resolution screen 15.6 "common, but the 653378-001 is a full HD screen which is much better than the other. You will not need all the drivers when the operating system detects the new the old driver installation screen (adjusts automatically the required parameters) must manage the new resolution.

• Confusion X61s LCD part number

  Hello

  I have a Thinkpad X61s LCD cracked that I'm trying to replace.

  I ordered the parts from 2 sellers and part OEM IBM and the other third party.  The two will identify the parts as 13N7092 the correct LCD for my X61s and references are on the parties, both the original and the replacement.

  However, original part has the power, signal connection (cable in water) and printed circuit at the bottom of the Panel, the spare parts (with the same part number) have both low power and the circuit board / connector for signal to the Summit.  The tablecloth is both not long enough and is not expandable (it is a Ribbon of circuit) to the connector on the LCD replacement.

  What I am doing wrong?  Someone at - he a clue as to why the parties are different, but the references are the same?

  See the image to

  http://www.2mars.org/wrong_x61s_lcd.jpg

  Thank you!

  Since its entry on ebay, you will need to talk to the person who sold you the display.   without it, directly from the IBM service of parts in sealed packaging, there is no way to ensure that it is truly a piece of original IBM.   decals and paperwork are easy to print.

  the seller claims that they offer a full money back guarantee within the first 10 days.   I suggest take on this offer and find your screen also.

  IBM has in stock for $788,08 plus taxes and shipping, but I must admit that it is a high price to pay just for a view.