Yoga clock speed 900

Hello

I'm looking in the "Performance" of the Task Manager tab and see that the CPU runs at ranging from 2.98 to 3.1 GHz clock speeds. Usage is not high, just the speed of the CPU. Y at - it a reason for this and can it be fixed so the speed decreases? I ask because I have not seen a computer constantly run at a clock speed near its value boosted. The minimum processor state is set to 5% in my power settings.

I believe that the ONLY WAY to reduce the frequency is to go to the "balanced"... profile

Tags: Lenovo Notebooks

Similar Questions

  • Yoga 11 s - maximum clock speed

    Maximum speed [0.80 GHz] listed in the Manager tasks you think it correct?

    I see that the processor is at 1.50 GHz up however the maximum clock speed says otherwise.

    Thoughts?

    Hi bredinger

    Yes a simple google on the issue 'Win8 task manager report incorrect clock speed' you will be discussion on the same issue.

    They have been using using another CPU monitor app

    They said in future updates should be able to solve this problem.

    Best regards

    Solid Cruver

  • Clock speed of the Radeon HD 4650 in the Satellite P300-23F

    Hi all!

    I am interested by the Satellite P300-23F because of its nice, these two drives huge CPU and - finally and above all - good price. But I can't estimate exactly its graphics performance, because I could not find information about the ATI Mobility Radeon HD 4650 used in this book's exact clock speeds.
    Did someone already has a P300-23F? If you do, could you please read the core and the memory clocks the GPU with a tool such as the CCC or GPU - Z? Perhaps you have also information about the temperatures of the CPU and HARD drive and also on the performance of the HARD drive?

    Thank you...

    Hello

    To be honest I m P300 owner but not the ATI Mobility Radeon HD 4650 is known as M96 ATI with DDR3 (1 GB) of graphics ram.
    I think that it s is not easy to say some details about the exact chip GPU clock speed because it of always different. It depends on the use of the laptop and the temperature.
    You must know that the performance of the GPU are controlled by the graphics driver and if the temperature increases to a critical level, that the pilot might slow down the chip so decreases the heat dissipation.

    The temperature of the processor and HARD drive depends on the use of the laptop too.
    If you run games high performance, then the temperature increases to a higher level and would be higher than the execution of only a few common tools such as MS Office Word for example.

    However maybe someone could put some values and details, it would be really interesting.

  • How to stop the power management to change my clock speed?

    Greetings,

    I run a HP compaq nx6320 laptop.

    I noticed that sometimes, when the computer is unplugged, the clock speed of the processor is reduced. intuitively, this seems to be a technique of energy saving.

    Using the Intel processor identification utility, I get something like this:

    And I suffer notable sluggish performance for all applications.

    I know that laptops tend to conserve that unplugged while power, some for example dim the screen, but they allow the user to increase the lighting, although it would reduce the time the computer can work with batteries.

    I want something similar about the speed of the processor, I want to turn this feature off and power the computer at full speed while it is unplugged.

    In addition, this feature is errornous, I took the screenshot above, while my computer is running on the current! and do not know why the power management insists on reducing the clock speed.

    All this turns out be caused by overheating. I'm misleaded by the tip of the utility intel PID.

    The fan of my computer was blocked by the filter sponge, which is made of a material that is poor, so partially decomposed and clogged the fan.

  • When I start my computer the clock speed of dram seems incorrect. Help, please.

    Original title: dram clock speed.

    When I start my computer the clock speed of dram shows at 133, but I use pc3200 which is 400.  I understand that you must double the clock speed of the dram when using dual ram, but dram clock speed should be 200?  and if so how do I ftx like it, thanks ernie,.

    following my recent posts, I tried a few other sticks of ddr400, today, I put them first into single just like sticks and the dram clock speed is 400.  as you advised the previous ram was poorly labeled so.  at the moment, I have two sticks of ddr400 and and everything seems to be fine.  I'll invest in a pair of quality ddr400 and I hope that now my problem is solved, thank you for your help and advice, and pointing me in the right direction to find the problem, I enjoyed it, best regards, ernie.

  • Z620 HP: HP Z620: increase the clock speed of the processor

    I have a HP Z620 workstation with processor Intel Xeon E5-2620v2. In the datasheet writes: "Turbo boost stepping occurs in increments of 100 MHz.".
    I want to increase the clock speed of the processor to the top of 2.1 GHz to 2.5 GHz. How to do?

    Hello

    Turbo boost is dynamic based on demand. If you want a base clock faster then replace two processors Xeon E5-2630 v2.  If your application cannot take advantage of 6 hearts then consider the E5-1620 v2 which is 4 cores and has a base of 3.7 and turbos at 3.9 clock.

    BTW - Turbo boost are not available on all PC configurations.

  • [Support request] Why my X 61 Core2DuoT9300 read clock speed 1.2 Ghz max since the @2 capasity. 5 Ghz

    Dear lenovo community

    I really need help for my problem here as I already looking for information a lot on the net but can't find the answer:

    I have Thinkpad X 61 with spec like this after benchmark with AIDA64/Everest:

    Intel Core2duo T9300 (Peryn) @2. 50 Ghz

    Processor clock: 1200 Mhz (original 2500 Mhz)

    CPU multiplier: x 6

    CPU FSB: 199 Mhz (200 Mhz original)

    Memory bus: 332,5 mhz

    L2 cache memory: 6 MB

    Motherboard: lenovo Thinkpad X 61

    HD: 250 GB Hitachi SATA 5400 RPM, 8 MB buffer

    BIOS: BIOS Type Phoenix (18/04/08)

    This laptop using Vista as OS.

    Previously, I wonder why this laptop performance is quite similar with my old intel-P3 500 mhz, very slow

    so after the reference with the software I know that my laptop is running half than the peak performance: @1. 2 Ghz compare with the capasity of maks @2. 5 Ghz, so I already knew what the causes of this slowdown.

    I had another computer toshiba T5500, each cpu core read with maximum @1. 5 Ghz, so I think that there is something big Miss here because my X 61 compare to old toshiba could say 2 times slower

    So I hope no friends could help guide me how to set the clock in the original speed, as should be

    I try to log in the bios but sees no possibility to change the speed

    Thank you somuch

    Rgds

    GON

    Thank you all, I found the solution for this problem to

    http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-71222#DOCTOP

    http://Forum.ThinkPads.com/viewtopic.php?f=30&t=92302&view=previous

    conclusion:

    The clock speed will be less than the normal speed if I plug out the batery and use 65w adapter

    When I use my adapter (65w) as well as the battery the clock cpu core back to normal (2.5 Ghz), an alternative if we want to use the adapter without battery taken in. we need to change the adapter 90w series

    Detective Conan now

    TQ

  • CPU clock speed condition sine qua non for the execution of 11.2

    DB version: 11.2
    Platform: Solaris, Linus (anything that can be run in x 86 environment)

    I'll buy a laptop. Being an AMD fan, I was thinking of buying a laptop with the
    newly launched AMD LLano.

    Faster AMD Llano chip for laptop is A8-3530MX. Clock speed is only 1.9 Ghz but will reach 2.6 Ghz using the 'Turbo' technology.

    http://www.AMD.com/us/products/Notebook/APU/mainstream/pages/mainstream.aspx#/3
    (Click on the product sheet tab)


    http://fastestcomputerworld.blogspot.com/2011/05/AMD-Llano-A8-3530MX-review.html


    In the document of 11.2 installation, I couldn't find a sine qua non being mentioned about clock speed


    http://download.Oracle.com/docs/CD/E11882_01/install.112/e17163/pre_install.htm#BABHICEE

    Any idea where I can find this info?

    Hello

    Minimum 2 Core CPU should be fine for the test, you need to do is 8 GB of memory at least

    See you soon

  • ATI Radeon Mobility Core/memory clock speeds - Satellite P10 873

    I have a portable Satellite P10 873 using 64 MB Radeon 9700 Mobility GPU, the base clock is set at 400 and 200 memory. The chip must be run to 450/260 so if anyone from Toshiba is reading this can you tell me if the cooling of the Gpu is sufficient for these speeds (judging by the traces of burning on my thighs could well be unlikely)?

    Is also the 64 MB expandable to 128 MB of VRAM?

    Post edited by: carmeldoab

    Hi Carmel

    First of all the graphics card is a small chip that attaches to the motherboard.
    The graphics card has no own cooling system. Only the CPU has a cooling fan.

    Toshiba recommends to use the graphic driver Toshiba because the drivers are changed and support an overheating protection. In this case the graphics driver controls the heat produced by the graphics card.
    In this case, it s undesirable to overclock the graphics card. If you want to overclock something so do it at your own RISK

  • Clock speed of Centrino M30

    I have a portable Satellite Pro M30 and when I check the system information, it indicates that the speed of the clock is 598 MHz, while the processor should run at 1.5 GHz, I tried to use "high" option from BIOS, but this does not alter the frequency at all. the laptop is substantailly slower it is, and it has been like this since I bought it.
    What can I do to fix this?

    Thank you for your help

    Hey,.

    Did you send the unit for repair or is it will likewise always because it is a tool that must be executed on the device so that it works properly, you must consider to an authorized Service Center

    See you soon

  • Satellite Pro 6100: Intel Pentium 4 M clocked 0.2 Mhz instead of 1.8 MhZ clock speed

    Hello

    I have a 6100 Pro Satellite under XP SP2 on Bios 1.90. A few days ago, he suddenly started running very slowly.
    According to the value of the ID of Intel, processor running at approximately 0.2 MHz, instead of the maximum speed of 1.8 MHz, with a similar reduction in the speed of the bus.
    I have reset the BIOS and restore the MBR & OS, but the problem remains.

    I'm running on current alternative, with display 100% charged battery. I also turned off all power settings to try to stop the running slow robot through the Intel speedstep technology.

    This might sound like a hardware problem, but if I boot the machine from a Linux CD (Knoppix), it works very well - very reactive, and according to linux, the clock measures the speed to about 1.79 MHz.

    Does anyone has an idea what could be causing this, or what I can try next?

    Hello

    at first your machine cannot operate at 0.2 Mhz. It's impossible! So I think that this utility Intel ID is not give you correct information. He must know that the slower speed will achieve your cpu, established in the region of 600 mhz.
    With 0.2 Mhz run your computer won´t!
    You said that you have restored your system, but the fact that you have installed the latest drivers and tools for this computer from the Web from Toshiba site?

    Maybe your CPU is defective, which can be a reason.

    Welcome them

  • Satellite L300 PSLB8E - how to increase the ram clock speed

    I have a laptop which is equipped with 2 slots for ram PC2-6400
    1 - Samsung module M4 70T5663QZ3-CF7 [800 MHz] 2GB
    2 - Samsung module M4 70T2864QZ3-CF7 [800 MHz] 1 GB
    GPU: Intel GM45
    Processor: Intel Core 2 Duo T5870 Mobile @ 2000 MHz
    According to the manufacturer, this kit allows you to work with the 667/800 MHz memory speed, but the problem is that reference programs show the actual frequency of the ram at 399 MHz.

    Question No. 1:
    (a) why not clock the memory works in 800 MHz but only 399 MHz,
    (b) how to change to a 800 MHz

    Question No. 2:
    I'm going to buy a processor
    Penryn Core 2 Duo T9600 processor (1066 MHz FSB) (2.80 G) Hz or T9400 (2.53 G)
    and install it in the computer
    and increase the memory of 2 x 4 GB 800 MHz (8 GB)

    I explained that this possibility is provided for by the manufacturer according to the Maintenance Manual for:
    Toshiba computer
    Satellite L300/L305
    Satellite Pro L300
    EQUIUM L300
    SATEGO L300
    (PSLB8x/PSLB9x)
    (PSLBAx / PSLBBx)

    If this operation will help to improve system performance

    I put t know what programs you use and if it is good or not if this info can be good and perhaps not. I put t know. The fact is that you n t have one any influence on the functionality of memory and I doubt that you can do something and change some values.

    Exact specification for laptop laptop does not for me but I think that Satellite L300 must have Intel GM45 chipset and I presume that for your motherboard FSB is 667 MHz. You can improve up to 8 GB and compatible 4 GB RAM module has PA3670U-1M4G part number.

    Upgrade CPU on Satellite L300? I put t know man. A friend of mine has this model of laptop and I don t know if it's the right decision to spend money to upgrade this old model of laptop budget.
    http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  • yoga conservation mode 900

    Hi all

    I got my 900 Yoga the MS store today. I can't find how to activate the mode of preservation. Power in the application of parameters of lenovo didn't. I have 10 home windows. Any ideas?

    I finally got conservation mode, works with a different application of lenovo, optimizer of OneKey. Fortunately, I now have to take a good few years before the battery must be replaced. Mode of conservation costs to between 55% and 60%. It would be nice to settle up to 70-75%, but it suits my needs properly...

  • Owners of Quadro 4000 - with first or After effects maximum clock speed

    Hey guys,.

    I installed my Quadro 2000 to a 4000 (latest driver 311,35 and I wonder if your clock of all speeds jump up when the first running or sequels?) Even if no changes or playback happens and GPU load is at 0%? Or are they doing they throttle down when idle? I use GPU - Z to check.

    Mine joystick down once I leave the first (or After effects)... I was wondering if anyone else is having the same experience. I know they run really hot when the clock pseeds are up.

    Also, I have powermanagement set to "prefer maximum" and I use mode video editng for the basic profile of New York City.

    Salud.

    Mine did the same thing as yours. I'm not under the latest drivers - still. I also updated the High Performance power management.

  • random clock speeds, lurchy video games, unplayable?

    First post very Hi, don't see anything similar on here so here goes...

    About 2 weeks ago my 1066NR HP Envy 15 (1st generation) began to give me a few problems, and I was not able to understand what the matter is and was hoping someone would be able to help me.

    Essentially, probably about 80% of all has restarted, the system turns strangely, but 20%, it seems pretty normal.  By funny I mean, say I load a video, any format in any player, it's jerky, and the sound is choppy.  I try to load SWTOR, my FPS says this is normal and the game seems actually quite smoothly, but I'm idling, not like slow motion low fps I know what it sounds like to, but it looks like I'm using a speed hack and I have my speed set at 50% or something (I'm not (, of course).  What is more strange is, when my system is this way, if I go into the windows experience index, and re-run the assessment, my numbers of drastic change.  I'm not talking a 0.1 point I had an extra program that is running for change, I'm talking from 4.8 to 7.9.  It's almost like my computer is overclocking the hell out of my whole system, and then she just can't handle what he made and it causes trolling.

    I tried a new ram HDD/SSD, different, fresh install of w7, even basic thermal paste to both gpu and cpu incase for some reason, it was a heating problem.  Tried former pilots of new drivers, flashed my bios to the new version and the old version, even tried useless things like swapping the monitor (I have 2 hp envy 15, so just cracked it open and swapped 'em for the hell of it, another system works beautifully).  I tried to install w8 on just to see if it is not happy with the OS, but there the vid card 4830 in it and I've just been unable to obtain w8 do not spit on me when he tries to load my video drivers.

    I tried every single Windows Update, tried with zero, etc.  The problem started apparently completely at random.  It is not like a "I installed it so happened" it just happened.  I tried install w7 that work with my other envy, pulled the HARD drive directly on thrown therein and it does, return switch and it works perfectly.

    The only thing I could find in fact that I can't understand how to diagnose/repair is... I tried to run a test of 3dbenchmark11, and he told me that my card is not compatible with dx11.  I guess since it comes with w7 is a card compatible dx11.

    Is it possible that my graphics card has become partially unwelded motherboard, and there just an unstable connection or something and it is the cause of the problems?  That was the case I think portable positioning would be more important, so no matter what, and if I get a good restart and it works normally remains normal running even if I move the laptop, so I would not * think * that's the problem...

    Holy crap I type much, long story short I am missing something?  Thank you!

    The CPU test failed on a bad reboot, so this does not coincide with a faulty processor.  CPU failures can cause the processor works and sometimes does not work properly.  To the extent where the log file is empty, I don't know if this is normal on a test has failed.

    Page 19 of this help document of Intel in detail how to run the test via the command prompt.  You can try to run the test via the command prompt, you should be able to browse the test and see the individual tests and the result.

    At this point, it seems more likely that the processor is a failure in view of all the steps that have been taken, symptoms and test of processor Intel failed.

Maybe you are looking for

  • Update to the 38 Options makes it more difficult to access

    With the latest Firefox, update versiobn 38.0 the Options drop-down has converted to a list in the browser tabs options. I want to see if this can be changed as: (i) the previous version was a lot easier to navigate and quicker to settle because it i

  • Satellite L305D-S5892 - Windows has encountered a problem

    Hello I have an I have a Toshiba-L305D-S5892With Vista Home Prem 32 I have a few problems and am currently blocked. Each problem below, is a problem that I met after taking a few steps. * The 1st problem *. A few hours ago my screen was frozen just a

  • Slow DVD burning on Tecra A9

    I found that when burning DVDs my burner works about 1 X I have checked this on the web and found other forums, which suggests to make sure I'm set to DMA if available on the transfer mode. I have it on the "primary IDE channel" on device 0 transfer

  • Cannot open FSX files or folders in windows 7

    I need to access all the folders etc in FSX in particular the module landscapes etc etc, but when I try to open the program Flight Simulater X (as when I had XP) it shows nothing! I can see it under Microsoft Games, but when I double click nothing ha

  • extra bytes when reading _dataReceived bluetooth...

    I'll send a byte stream via a Bluetooth for blackberry. I then take the substrings from the received data. For some reason, I get 3 additional bytes of data from a location... I installed a dialog.alert which shows the flow of data properly after its