Yoga questions 3 Pro Bluetooth with headphones/speakers

I was wondering if anyone has had problems with connecting to a Bluetooth speaker or the headphone devices are technically matched (all the icons and the guests to say 'tied'), but the music always comes out through the speakers. No idea how I can get it to work - no other laptop I've had as did have this problem?

Thank you

Looks like once I deleted the Realtek driver now it works

Tags: Lenovo Notebooks

Similar Questions

  • Bluetooth says connected but not music with headphones

    I have problems with my iPhone 7 and my Bluetooth headset. They connect to the iPhone, but the music plays through the phone not the headphone speakers. For the music played through headphones, that I have to go into the Bluetooth settings, then click the name of the headset (which shows also connected), then music plays through the headphones very well. This process must be done whenever the headphones are powered and connected. Anyone else have this problem or knows how to make headphones work early?

    I'm having this problem too. Really frustrating.

  • Equium P300: no sound from speakers but work with headphones

    The speakers on my P300 Equium seem to have stopped working?
    I checked the card its an all and them seem to no errors.

    Sound bar at the bottom right to move as it should when I play music, but it just doesn't come out of the speakers.
    However, it does work with headphones.

    Any ideas on how to solve the problem?

    Hello

    Hmm. You can hear the sound using headphones but you can't hear speakers that well it looks really a speaker problem, but it s really strange that both speakers are dead at the same time

    In your case I would remove the sound card driver and would update with that of the European driver Toshiba page.
    Check what's happening after the update

  • IDT Audio Codec time Sound speakers but not with headphones on ENVY DV7 series laptop

    I bought my laptop not more than two months ago. Its perfectly played through my helmet literally the day before yesterday.

    Only two changes have occurred since then, first of all I accidentally plugged my headphones into the external microphone jack, then I updated the 'Music' for Windows 8 PC application.

    After my sound stopped working. I restored my PC to a restore point dated before its no longer works in my helmet, however resonates once again that in my speakers (when my headphones are disconnected). When I plug my headphones, sound no longer plays in my speakers but no sound from my headphones either.

    How can I get audio to play through my headphones?

    Product name and number: Envy of HP dv7 Notebook PC C2h74UAR #ABA

    Operating system: 64-bit Windows 8

    Error message: None

    Changes: 1) update "music" app for Windows 8

    (2) accidentally plugged in headphones and external microphone jack

    Hello

    Try the following.

    First of all, download and reinstall the Chipset driver at the following link.

    Chipset Driver - Windows 8

    When reinstalling, restart the laptop.

    When windows has reloaded, download IDT Audio Installer on the link below and save it in your downloads folder.

    IDT Audio Installer - Windows 8.

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio with headphones.

    Kind regards

    DP - K

  • Bluetooth connection with headphones

    Hi forum,

    I bought the receiver rx2 Hama Bluetooth to connect my Portege via Bluetooth
    with my home entertainment system. It works very well. Toshiba-bluetooth-stack handles
    the device as a Bluetooth headset. The only thing I miss, is an auto-connect-option.
    Now I also have to connect manually each time: right-click on the icon of the power off
    and the "connect". My cell phone will connect automatically to every time.

    Someone has an idea, how can I achieve the automatic connection with my "helmet"?

    Thank you a

    Best regards
    Martin

    Hello

    The same situation here, but I can leave with it. Mobile phone automatically detects the headphones, but by usage with my Tecra I have to activate manually whenever I want to use. As you know you can use many various BT devices with your laptop and I n don't know if he has a sense for each to connect after starting the laptop. I have only one device of BT and did not attempt to check if more than one device can be connected at the same time. If you know more about it please let know.

    I'm really interested on this subject and maybe someone of the explanations on this subject.

  • SA50-532: lost sound in speakers, but work with headphones

    Hello support forum,

    I suddenly lost sound through the speakers. I checked the audio drivers, audio and all controls. He looked at the work, I could not hear the sound, but when I plugged in the headphones, to my surprise, I could hear the sound.

    Please suggest me, what could be the problem behind all this. It is a hardware problem or software problem and how to get out of it.

    Thanks for your help in advance,
    Kind regards
    Kiran

    Hello Kiran

    Not easy to say but I think that there is a hardware problem. All parameters of the volume control affect the speakers and headphones. If the headset works perfectly, I guess there is a problem with the speakers.

    Your device is not old and warranty should still be valid. Contact the customer Service of your country partner and let check the device.

    If you need address check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true.

    Good bye

  • What is the iPad Pro works with an Apple bluetooth keyboard?

    What is the iPad Pro works with an Apple bluetooth keyboard?

    Yes.

  • On closure of my MacBook Pro always get question "continue application"? with the boxes option to cancel or continue the request.

    On my Mac Book Pro to always stop get question "continue application"? with the boxes option to cancel or continue the request.

    Selection of abandonment does not prevent the following message appears when closing next down.

    Activity monitor shows all the applications that you have

    installed, running in the background? Something can be...

    If you open the force quit, are there topics other than the Finder

    and maybe a browser?

    You repaired the disk from disk utility permissions lately?

    We could also see other boot options on the use in

    Recovery of OS X to use the "OS X Utilities" in there. Be careful.

    Is there more than one user account on your computer? If you

    Start in another user account and have auto login for

    the fact that it is one that rises at the start, a piece

    similar issues or is it just works fine on shut down?

    The question may take some trial and error troubleshooting. This

    may include some basic startup keyboard shortcuts for

    the computer to start in Safe Mode, to do more test, etc.

    If you have access to an official Apple store, you can be

    able to set up an engineering appointment & have someone closer.

    Good luck anyway...

  • Questions "non Pro" yoga 2

    HY

    I am really interested in buying a Yoga 2 "non Pro" in its edition of "stronger" (i5, 8 GB Ram & SSHD). Unfortunately, some sites show different pictures inside the laptop and so I'm not really sure how it actually looks like.

    The money of the Pro edition is only silver outside but entirely black inside (keyboard, touchpad & surrounding area) with décor a little "rough".

    On some Yoga 2 "non Pro" product photos in money is exactly the same (for example the site of Geizhals of German), but on others, it seems that the Interior is also in money and completely even (do not "rough").

    Here are 2 pictures that should clarify what I mean:

    Yoga 2 pro on Lenovo Homepage: http://shop.lenovo.com/at/de/laptops/lenovo/yoga/yoga-2-pro/

    Yoga 2 "non Pro" on Lenovo Homepage: http://shop.lenovo.com/at/de/laptops/lenovo/yoga/yoga-2-13/

    I really appreciate all the answers that can clarifiy how inside of the "non Pro" is in fact designed. It is silver or black, it is "rough" or not, and it is the same for all colors (especially Black & Silver)?

    Moreover, the fact the keyboard on the "Pro not' have the same backlit like on the Pro version?

    Thanks for all answers & best regards,

    MIK

    2 13 color of the palmrest Yoga depends on the model of your choice color: gray, black or orange. And it is not textured with Yoga 2 Pro.

    Yoga of orange 2 13: black Palm
    Black Yoga 2 13: black Palm
    2 13 Yoga gray: gray wrists

    I think that these are the colors. Just look at the pictures.

    Yoga 2 13 has a backlit keyboard, you can see by looking at the space bar, because there a torch icon or a flashlight printed on it. I think he's using the same keyboard Yoga 2 Pro.

    Also, feel free to buy a sleeve or the official slot in the case. You must treat her well. The slot in the case is my favorite to protect my Yoga 2 Pro when they travel.

  • The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

    Original title: the headphone volume

    How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

    Hello
     
    1. who is the operating system installed on the computer?
    2. What is the brand and model of headphones?
    3A this works much earlier?
    4. What is the brand and model of the sound card?
    5. have you ever tried to play the Audio using different media player applications and check?
    6. have you tried to connect the headset to another computer or phone and check if it works well?
     
    I suggest you follow these methods and check.
    Method 1: Run the audio troubleshooter.
     
    Method 2: Set the earpiece/microphone as default device and check.
     
    a. right click on the volume icon in the system tray at the right corner on the desktop.
    b. Select the playback device, go to torecording tab.
    c. make a right click and headphone/microphone as the default device.
    d. click on apply and ok.
     
    If above steps fails, proceed to method 3.
     
    Method 3: I suggest to disable the improvements and check.
     
    a. right-click on the icon "speaker" at the bottom right of the screen.
    b. Select "playback devices".
    c. right-click on the helmet.
    d. Select Properties
    e. click improvements
    f. check Disable all improvements
    g. click OK
     
    You can read this article for more information:
     
    Tips for solving common audio problems

    You can also contact the manufacturer of headphones and check.
     
    I hope this helps!
  • Audio works with headphones, but not the speakers

    Hello, I have a DELL XPS17.  The sound works fine with headphones, but no sound when the headphones are disconnected.

    Note that I had the opposite problem (its good speaker, but no helmet) and then updated the driver.  Once the new driver has been installed, the problem was reversed.  Very strange: Pei

    Last driver installed is Audio_RLTK_W7_A05_Setup-J3VMR_ZPE

    Thanks for your help!

    Hello. You can test your speakers by running test audio fast ePSA or PSA tests.

    You can test the audio driver by opting for the native Windows audio driver. If you get the same symptoms with the native driver, then you can exclude a bug in the driver from Realtek. This Realtek driver has been around for awhile now and has no bugs that I know.

    • 1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
    • 2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
    • 3 Select this option to "Update driver software".
    • 4. click on "Browse my computer for driver software".
    • 5. click on "Let Me pick from a list of drivers on my computer".
    • 6. put the "Show compatible hardware" check box if not already checked.
    • 7. in the list of devices, click on 'High Definition Audio"(native driver).
    • 8. click on "next".
    • 9. in the update driver warning box, click 'Yes' (the driver).
    • 10 restart the portable computer if you are prompted. If not invited, so no need to restart.
    • [To return to the Realtek driver, do it again but reverse steps 2-7 names].

    If the speakers and the driver to pass the tests, you might have failed to sense pin into the headphones Jack, explained in the FAQ of Jack for headphones.

  • I have a question, I'm trying to connect my phone via bluetooth with my laptop, but I can not connect, I can not find my phone bluetooth device is a photon with sprint 4g

    I have a question, I'm trying to connect my phone via bluetooth with my laptop, but I can not connect, I can not find my phone bluetooth device is a photon 4g with sprint, if anyone can help me I appreciate it.

    Check with the manufacturer of your celllphone or Sprint to make sure your phone has this feature, and if so, what is needed to get there.  It should be in the documentation for the phone manufacturer or Sprint web site.

  • Yoga 10 - Very poor Bluetooth sound quality

    Hello

    I bought roughly the new Yoga 10 Tablet. Now, I wanted to use it with headphones and bluetooth speakers and noticed that the sound quality is quite poor. As the treble's strange artifacts in it. Pretty hard to explain but the sound is very audible lower both helmet and taken my old Tablet even to untrained ears. It's kind of compareable to a low bitrate MP3, although not quite difficult to explain.

    So far, I've tried connecting the load from JBL, Bose Soundlink Mini and a bluetooth headset from noname to the Yoga 10 Tablet and * ALL * have poor sound quality.

    Now the funny thing. When I connect audio devices bluetooth mentioned to my old Tablet (Lifetab E10310) or my phone (Galaxy Nexus) is by one of my windows device, there isn't * no. * problem with the sound quality. Yes I know bluetooth audio is compressed, but given the 10 Yoga produces its largely inferior to other devices the problem is clearly the tablet of Yoga of course from the same material. No difference if high sound quality on the map microSD or spotify.

    It is pretty much useless for listening to music via bluetooth.

    All suggestions greatly appreciated.

    Ok. Returned Tablet - problem solved. Sort of.

    I deffinately need an Android based Tablet, but it seems so difficult to find a good. I did not have high hardware demands and that Yoga 10 seems to do the trick and it was affordable too. However, it's a software has been total failure and I didn't want to exceed my return period to see if it matches Lenovo to solve problems. So now the hunt of another brand, but seems difficult. All have a major fault one way or another and if nothing else then on the battery life. Well. May be another couple of months with my Junk old Tablet and then the market will freeze. There was a glaring lack of introduction of beautiful tablets without major flaws for like a year or more (GPS might not be necessary, but a lot of apps that really just use google locationservice scored misunderstandably GPS as required, and as such it will install these apps via played googple - bad luck).

  • Record with headphones connected screen

    OK guys, I REALLY need some help here! I sought an answer to this question for days without success. First of all, let me explain what I'm trying to do. I do (for youtube) videos of me children's games online. I have been using quick time player, which works very well. My problem is that I need one of the two (or better yet, BOTH!) solutions to the following problem. My problem is, I have a 2 years old, who loves to talk while I'm doing these videos of the screen. Is there a way to record the audio of the game, but block out all the other noise?

    2nd question: I would like to be able to make videos while everyone in the House is asleep. Is there a way to record and play audio screen with headphones plugged? Or any other way where the sound will be recorded but not read aloud. I tried with quick time player and headphones connected, when I play the video there is no sound. Help, please! Eternally grateful to anyone who can answer one or two of these issues. Like seriously, I would buy you doughnuts if I could!

    I use a MacBook pro. I would also like to know how to do the above things on my iPhone too!

    When you save your gameplay with Quicktime Player, by default, it records the sound from your microphone.

    Your microphone is picking up all the sounds around you - including the sound produced by your game and the noise of your 2 years.

    There are a few things you can do with audio on your mac that can help in achieving what you want.

    I just played a little bit of film QT listening on my helmet and captured audio in a new audio recording, so it should work!

    Another approach would be to use SoundFlower (which is free). With you install new get audio input and output that appear in system-> sound preferences options. Here is part of my entry in system preferences options:

    SoundFlower allows you to connect the audio output of a program to the audio input of another.

    So if your audio output is Soundflower (2ch) and your Soundflower (2ch) audio input, you can save. But... you will not hear anything!

    Comes a little-known program that lives in/Applications/Utilities: setting up Audio and MIDI.

    With it, you create two "aggregates devices" - a Soundflower device and the built-in output simultaneously and also for the entrance to exit.

    Choose the options for your output and audio input and you can play your game with a helmet and it will record.

    So the night registration problem is solved.

    It shouldn't be too hard to find a way to solve the problem number one in the same direction (Tip: simply choose another option of ENTRY).

    There are also some paid apps whose purpose is to intercept the sound of your mac and save Digital - Audio Hijack and Wiretap Studio are two that I remember.

  • Audio problem NB100 - pregnant no sounds, with headphones, it's ok

    Hello

    need help, please.

    I have a brand new Toshiba nb100-10y, but have no sound - without headphones. To say my speakers no sound.
    OS: XP Pro SP3, Device Manager Winndows is ok, do not have any yellow mark exclamation. And as I said, with headphones, it's ok.
    I use the factory drivers and their default settings with the bios 1.90.

    Someone has an idea? (Or I need to find any place of service...)

    THX,
    AoL

    Hello

    If you can use the headset then it would mean that the audio driver is working correctly.
    As I m wrong not the NB100 does support the Realtek sound card.
    I think you should have got a Realtek HD audio Manager in the control panel.
    Check the option in the Realtek HD audio Manager and make sure that all controls are set at the top level.
    Input/output Audio, you can find the option and could test the speaker output.

    PS: you can use the new Realtek audio driver directly from Realtek page.

Maybe you are looking for

  • Scanning from HPC5150 for HP G60, "no scan option" HPSDU "No. Scanners installed" Win 7

    Scanning from HP Photosmart C5150 all-in-One When you use the Scan Menu button, choose "Scan to Computer": Message 'no. Scan Options '. When parsing Windows Fax and Scan, 'no Scanners were detected. After running HPSDU, 'no Scanners not installed. "

  • Computer stops after 30-40 minutes

    original title: after getting started, computer will not run longer than 30 to 40 minutes before it stops. have to wait 30 to 40 minutes before he will return. Ben said fan does not work. checked both and the two sems to work. said also that it might

  • OracleAgent12c1Agent service does not stay on

    I had a configuration of the oracle enterprise environment and the follow-up of the different targets for several weeks now. Adds a vCenter target that failed and now my oracle agent service is more will stay on. It will start then turn off informing

  • Turn on CC on two Macs

    Hi, I recently bought creative cloud and I have a desktop mac and a mac to work, how can I activate on the two mac?

  • How do you set up Lightroom to show synchronized videos?

    I am under Lightroom cc and noticed that my videos synchronized do not appear in the catalog: "all photographs synchronized.  Perhaps the name of the catalog is enough explanation but if videos do not appear here, how can we configure one videos sync