Yoga Tablet 8 does not start

Similar Questions

• Yoga 2 Pro does not start disk hard undetected

  Can someone help me solve this problem? Or guide me how to solve?

  I bought yoga 2 pro in Malaysia three weeks back. And I had traveled in India last week. The PC was working fine until yesterday. Yesterday while I was working all of a sudden, the system hangs and I had to hard reset. But after the system starts. It shows the found boot device. I turned off and tried to start the button restore and open the bios, it shows that the HARD drive is not detected.

  Same type of question I did face twice before, but if I hard start it again, it worked fine.

  Now, the hunt begins. I got this PC near centre of Lenovo. He said you do not have to make here and gave me the number of customer support. I called and gave the serial number and given all the necessary information, they asked. Then they said that its service line product and premium premium is enabled for me. I was happy to hear that, and he asked me to hold for two minutes. I waited on the line. When he said this product not supported in India and I must remind the Malaysia and gave me toll free 1800-22-0116. When I try to call that number, he said that there is no such number.
  Once the centre of Lenovo in charge told me if I pay they can use my PC here.
  After awhile, I got a call from Lenovo tech support Bangalore saying that my PC is not supported by the Lenovo India and if they want to resolve what I have to pay for it.
  When I buy the product that I checked in the shop, they said its in warranty international.
  That means international warranty? If Lenovo can fix the PC if I pay. Why they can't fix the when my PC is under warranty? It is just a month old PC. Purely of hardware failure. Not a bad manipulation.
  Am on trip in my business trip and am not able to use my PC for two days now. Lose business here. Technical support should help the customer to correct the problem. Do not deprive us.
  Can someone help me? Is there anyway that I can get this fixed number in India. I must travel to the Cayman Islands in another 10 days.
  Will be my request reache lenovo?

  I had to send the laptop to the Malaysia through my friend for the service and got the replaced HDD/SSD. Now, works great.

• Satellite U920 ultabook-Tablet does not start

  Hello world.

  Just bought the new laptop / Tablet 3 days ago.
  Other than Windows 8 fustrating me death, computer is wonderful...
  until today.
  Does not start!

  Turns on... but now those at home...
  I tried with the battery, but also the decision-making power.
  When I press the Start button...
  2 / lights go on as usual.
  Keyboard led lights as well.
  A that's all what happends...

  Finally, after a minute, the computer will beep 3 times slowly then close.
  No screen at all... not even a light coming from the screen...
  Quite annoyed that its only 3 days...

  Any advise?
  See you soon... Rob... Sydney

  > Just bought the new laptop / Tablet 3 days ago.

  The new book should work fine if it s not the case, then the hardware or software causing the problem.
  I think that it s material so why you n t contact your laptop dealer and ask for the new laptop.
  Replace this unit and test a new

• Start button does not start a Tablet

  my Tablet a500, nowabout 5 years all of a sudden does not start. When I press the button start nothing happens. I fall asleep at night without turning it off. IM scared now become an expensive paper weight. any help

  Thanks for the reply, yes I have plugged into the charger, the Start button turns on but nothing happens. Thanks again

• Tablet Dell coming 8 Pro does not start

  Hello

  The Tablet is only about a year. And I've kept it's safe and sound, no damages or drops. Nothing.

  But yesterday morning when I got it, he went to sea and no matter what I do, it does not start!

  I press and hold the start buttong. Nada. I even press the windows key or was desperate enough to press the volume even toggles!

  I thought that maybe the load isn't enough. So I let it charge overnight. Still nothing.

  He used to have a small problem before that sometimes he used to take a few minutes to actually boot (startup). But it's random and many times, it was when an update has been installed. But not always.

  But this time, he stayed off the coast and after more than 24 hours, does not illuminate!

  What should I do?

  Thank you

  I think just, I solved this problem. Make absolutely certain that you are using the supplied with your coming Pro USB wall wart, similar and ordinary phone chargers don't work reliably and sometimes not at all! There will be a sticker on the side of her windows. The Pro should need more energy than what is normally fed by normal phone chargers. I hope this helps!

  Also, I think that light orange/red momentary while that push the power button is actually an indicator of battery flat (as crazy as it sounds). These types of batteries are supposed to be completely empty as it will ruin their fast enough, so they are designed to power off with a few charges left to protect themselves to be completely discharged.

• Still 2 WT10 does not start

  Hello

  My Encore 2 WT10 lights. I updated the bios to 1.4 via the USB port. It does not start after the upgrade. The screen remains black. I can load and reload my mobile phone via the tablet or a USB Hub to power. If I press the button for 30 seconds, turn off the USB device, press the button again turns on USB power. But the screen stays black, no screen BIOS or Windows, no audio or USB data connection (or other signs of life).

  I think that my tablet is in soft-power-off mode. How can I hard-power - off the shelf without removing the battery internal?

  Try to open the BIOS/UEFI tablet settings by following these steps:

  Press and hold the volume button at the same time by pressing the button for a few seconds. Ideally, this will open the screen of the BIOS/UEFI. Once this is done, make sure that the settings are correct or restore the factory settings.

  If that does not help, then additional assistance may be required.

  In a similar way a lot, the splash screen appears where you can recover your tablet from an image that you created previously (recently) or in the worst case, reinstall Windows.

  Also keep in mind that between reboots, a 10-15 minute interval may be required (don't know why, but it helped me dealing with errors in the past).

  My impression is that the BIOS 1.40 was already installed in the WT series, so some models have been improved to 1.60. BIOS should normally updated via WIndows Update or Toshiba service station.

  Hope this helps

  BR

• Flow 10 7 HP - Windows does not start, I can't get into recovery 8.1 because cannot boot from USB-HELP Please!

  Hi all, I'm new here!

  I am (excuse me: has) with a stream 7

  A few days ago, I tried to install Windows 10 TP renovation 8.1 with Bing. After a while of waiting, he managed, but unfortunately I have forgiven to in SSD Tablet hp drivers, thinking that they were not necessary. If the touchscreen, WiFi and all the other stuff has failed. After I've got collegated by OTG, a keyboard and a mouse, that I managed to use Windows 10.

  Try to install the drivers, my fault, I opened a .exe from Realtek (perhaps for audio), Tablet asked to reboot and after that I can't access Windows anymore.

  I tried to start Windows 8.1 from a USB key, but it does not start, the same even if I disable secure boot.

  With disabled bitlocker Windows gives this error

  

  In the start option, I set these settings

  

  I put the USB in this way:

  

  The stream does not consider the USB absolutely XD

  If I turn on again the secure boot Windows gives this error (which 99% is caused by the .exe I installed):

  

  Restart the flow some time with secure boot it goes in a menu (where touch screen works) where there are a lot of options to reset Windows, but none of them doesn't work. If I try to format in this menu it asks password for my account, but it does not accept the mine :/

  If I try to open the collection (from volume button when it starts less) it gives this message:

  

  Waiting for relief,

  Thank you for your patience!

  @fotogruia in my case, the indicated operating system was windows 10 and as I wrote it has worked well. Good luck!

• Open my laptop, now it does not start

  Hi everyone, the first time poster.

  I opened my laptop (touchsmart tm2 1070ca) to attempt to clean the keyboard and now it does not start at the top.  all the LEDs light up, but the caps lock LED flashes.  The fans and hard drive look about 2 seconds before silence, and about 10 seconds later, the laptop beeps loud and then stops.

  When I opened upward, the touchpad is detached from the motherboard. I finally get it reconnected, but it turned out to be very difficult.

  I tried the Bios recovery suggested on the support site, but it had no effect.

  any help would be massively appreciated.  no no not my laptop will really make my life difficult.

  I know this is an old thread but since there was no solution, I felt should display what has worked for me, in case someone else has this problem.

  This morning my computer refuses to start and the caps lock blinked. I've read elsewhere that a user of a model different from simply removed HP sound CD ROM and re-inserted. My laptop is a HP tm2 Tablet PC, so it doesn't have a removable CD ROM, but I was wondering if another device had become "loose". First, I removed the dongle USB for my mouse and battery and then restarted. That did not help so I forced a stop down (press the power switch.) Then, I opened the background panels and reinstall the RAM (actually happened two sticks to make sure) and removed and re-inserted the HD then restarted again. I don't know which of these factors did the trick, but it worked.

  Hope someone finds this useful info.

  G.

• Application does not start and does not respond. Closed that it self.

  Hi guys

  I made a game for the BlackBerry using Flash Pro CS6 z10. I tried it in the Simulator and I installed it in a system z10.

  To do this, I packed the bar and signed the app using the command line and I send the Simulator and the device with the HELP of graphics OS Tablet.

  Everything works perfectly, in the SIM and the device... However, when I presented the game on the portal of the seller for review and approval, I had... "correct the following issues and resubmit your application as a new version."

  I'm testing your app on the BlackBerry Z10. When I press the icon for your application, it does not start and does not respond. Closed by it self. » ...

  Anyone know how to solve this problem or what can I do? (and why it's working ok for me and not them?)

  Thank you very much!

  OK, I downloaded your app and checked that it uses Stage3D (you renderMode value to indicate in the app.xml file). I tested it in point 10.2 and it works for me. When using the portal provider make sure you specify BlackBerry 10.2 or higher.

• Error code 0 xC0000001 on Asus Vivo tab Rt with RT Windows does not start

  Error code 0 xC0000001 on Asus Vivo tab Rt with RT Windows does not start

  Hi guys,.

  I hope you can help, I bought an Asus Vivo tab RT with month windows RT 13 there, I used it only for the first two weeks after I bought and then travel. I went back to find he does not start and going to a blue with 0 xC0000001 error screen after several attempts of the operating system on your PC could not start, so it needs to be repaired.

  It is now one month out of warranty and ASUS refuse to provide support for me, I used the recovery media to reset the Tablet, but still he starts to this message.

  I'm not sure what I can do, I'm totally stuck. Can anyone offer some advice on what I can try? anything via the command prompt?

  At this point I have an expensive paper weight.

  Thanks in advance

  Joel

  Hello Joel,
   
  Usually, the error code 0 xC0000001 indicates that winload.exe in C:\Windows\System32\Boot could not be found or is corrupted. This could be the result of a corrupted download, before the creation of the operating system.

  Since Windows RT came pre-installed and require installation media to retrieve the device, you may need to contact Asus support for assistance.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

  I'm really sorry not to be useful in this regard.

  Please do not hesitate to contact us for any further assistance on Windows.

• Laptop does not start > how to delete data

  Separated from this thread.

  How can you get your data off when the laptop does not start again? "catch fire or explode"... in a suitcase on a train or plane? This sounds like a product ready for the market yet? More I explore this question of "overheating" in the line it worse it seems: my machine was like a hot plate not a laptop when it has been completely unfolded in a cool room: about right to mention briefly without getting hurt. (And my data is still inside of her, if it is not melted...)

  Well, unlike a laptop where you can remove the hard drive, these tablets are pretty well fixed and specifically your case, (it will not explode or catch fire) is to locate the device next to an air conditioner or a blowing unit to blow fresh air into the vents.

  At this point, press on and hold the volume button upwards and at the same time, press and hold the power button for about 15 seconds, then release it.

  If you can get it to feed and at least screen troubleshooting, see if you can get the machine to run in safe mode.

  If you can get to the desktop, you can down all your data by opening the file manager, click on 'This computer' and open the 'users' folder, go to your account name folder and copy all the files on a USB key.

  It is the only way to get your data out of these tablets.  You can't have the SSD card to remove it to try to force the machine to run at least once.

  Now, I think that your machine is still active, just overheating.  Get off in any case data.

  A RESET and reinstall updates are the only thing you can do.  I have the i3 model myself and am on it now and no problems with it.  Some games will heat, but never to the point that everyone is a report.

  If all fails, send the replacement machine.

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

• iPhone hot 5s fees and does not start

  phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

  More troubleshooting can be found in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps