You can use functions defined by the user in orardf: statement?

Similar Questions

• Can I use function defined by the user in the control file Sql Loader?

  Hi Master,

  Can I use fuction user-defined in the sql loader control file? Please advise... !!

  If you can provide an example... It's very kind of you.

  Concerning

  AR

  Here are a few examples that should give you clues: Sql loader

  I seriously wonder if why you use the century previous SQL * Loader instead of a external table:

  ORACLE-BASE - external Tables: querying data from flat files in Oracle

  
  

• function defined by the user in the package

  Hi all
  
  is it possible to return a value greater than 1 when you use the function defined by the user in the package?

  You must declare variables US1 and US2 as well. I also modified your code a little more assing numbers directly rather than using select.

  First of all,

  Your package body and specifications should have the same input parameter names. Your spec is seen cid and your body with ccid. Has changed.

  CREATE OR REPLACE PACKAGE creator.marco_function_clienttype
    IS
  
    -- 0 - not found
    -- 1 - small business
    -- 2 - corporate
    -- 3 - individual
  
     FUNCTION f_clienttype
       (ccid number
       )
       RETURN NUMBER;
  END;
  / 
  

  CREATE OR REPLACE PACKAGE BODY creator.marco_function_clienttype
  IS
  
  FUNCTION f_clienttype (ccid NUMBER)
     RETURN NUMBER
  IS
     us    NUMBER;
     us1   NUMBER;
     us2   NUMBER;
  BEGIN
     --officialtype = 2 - corporate, officialtype = 3 - individual
     SELECT ct.officialtype
       INTO us1
       FROM contragenttype ct, contragent d
      WHERE d.ID = ccid
        AND ct.cid = d.contragenttypeid;
  
     ---
     IF us1 = 3
     THEN
        us    := 3;
     ELSE
        --ENTERPRISETYPE.id = 910 - small business
        SELECT dd.enterprisetypeid
          INTO us2
          FROM contragent dd
         WHERE dd.ID = ccid;
  
        IF us2 = 910
        THEN
           us    := 1;
        ELSE
           us    := 2;
        END IF;
     END IF;
  
     RETURN NVL (us, 0);
  END;
  END;
  / 
  

  G.

• You can use a Clip in the UILoader?

  You can use a Clip in the UILoader?

  Thanks, rower

  You can load a swf file using the uiloader.  what you trying to do?

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• Function defined by the user in order by?

  Hey guys.  We try our postgres database to Oracle to port, and I fall on this issue.  We have columns called "sortSequences", which are arrays of arbitrarily long integers.  To some fine POC, I use varray(), but that probably won't work as a production application, due to its strongly defined by size.  In any case, the crux of the problem is that I need to be able to select * from foo by sortSequence, where the evaluation order is custom code.  The array of integers represent essentially mathematics of infinite precision and we have a deterministic algorithm to compare, but we can't just produce a value between them (what I think keeps me to use a card member function in a user-defined object type.)  In other words, we don't really care what are the values, we are just using their collectively as an index of sort.  An aggregate function like the right answer, and a simple scalar function is out of the question.  We watched the field index, but it is not clear to me that even if we created an operator related to our type defined by the user that the db would use this function for order by rating...

  Everyone can think of a solution to this problem?  If we must live without this feature, we can reproduce in the application code, but we want to avoid that at all costs...

  Thank you

  Brian

  The array of integers represent essentially mathematics of infinite precision and we have a deterministic algorithm to compare, but we can not simply to produce a value between them (I think preventing me to use a card member function in a user-defined object type.)

  OK, but what about a method of ORDER?

  Since you seem to have the algorithm already, is not just a matter of implementation of the COMMAND method?

  Performance, it is not ideal but it's a start.

  Something along these lines:

  create or replace type array_t is varray (32767) integer;

  /

  create or replace type sort_sequence_t as object)

  v array_t

  member function serialize return varchar2

  , for the integer return order member function match (o sort_sequence_t)

  );

  /

  create or replace type body sort_sequence_t is

  member function serialize return varchar2 is

  RES varchar2 (4000);

  Start

  because me in 1... self.v.Count loop

  If I have 1 > then

  RES: res = | ',';

  end if;

  RES: res = | TO_CHAR (self.v (i));

  end loop;

  return res;

  end;

  order whole return leg (o sort_sequence_t) member function is

  whole v1;

  whole v2;

  Start

  because me in 1... Greatest (self.v.Count, o.v.Count) loop

  If self.v.exists (i) then

  v1: = self.v (i);

  on the other

  v1: = 0;

  end if;

  If o.v.exists (i) then

  V2: = o.v (i);

  on the other

  V2: = 0;

  end if;

  If v1< v2="">

  Returns - 1;

  elsif v1 > v2 then

  Return 1;

  end if;

  end loop;

  return 0;

  end;

  end;

  /

  Tests...

  SQL > with sample_data (id, sort_seq) as)

  2 Select 1, sort_sequence_t (array_t (10,1,1)) of all the double union

  3 select 2, sort_sequence_t (array_t (1,1, -1)) of all the double union

  4 Select 3, sort_sequence_t (array_t (1,1,1)) of all the double union

  5. Select option 4, sort_sequence_t (array_t (1,1,2)) of all the double union

  6 select 5, sort_sequence_t (array_t (1,20,1)) of all the double union

  7. Select 6, sort_sequence_t (array_t (1,7,1)) of double

  8)

  9. Select t.id

  10, t.sort_seq.serialize (as seq_str)

  sample_data 11 t

  12 order by t.sort_seq;

  ID SEQ_STR

  ---------- --------------------------------------------------------------------------------

  2-1,-1, -1

  3 1,1,1

  4 1,1,2

  6 1,7,1

  5 1,20,1

  1 10,1,1

  6 selected lines

  Post edited by: odie_63 - added example

• Generator function defined by the user (normalize data points)

  Hi all

  You can use the function Scale1D to the Analisys Advanced library.

• function defined by the user in where clause

  Hello
  
  Please let me know how to use user-defined in the where clause. I need to use the function that returns the date for dateid.
  It generates the error...
  

  SELECT To_char(fnc_get_date_for_dateid(a.postdateid),'DD-MON-YYYY') transaction_date,
         SUM(A.points) POINTS_OR_MILES_CREDITED,
         SUM(CASE WHEN a.points is null THEN a.transactionamount ELSE a.points END),              
  FROM   accrual a
  JOIN   datecal dc ON dc.dateid = a.postdateid  
  join   MemberALL m on m.memberid = a.memberid
  WHERE a.awardnumber IS NULL
    AND a.accrualtype = 'B'
  GROUP BY To_char(fnc_get_date_for_dateid(a.postdateid),'DD-MON-YYYY')
  ORDER BY a.postdateid;

  Error

  ORA-00979: not a GROUP BY expression
  00979. 00000 -  "not a GROUP BY expression"

  Thank you
  Sandy

  Hi Sandy,

  Have you tried like
  ===========================

  SELECT To_char (fnc_get_date_for_dateid (a.postdateid), 'DD-MON-YYYY') transaction_date,.
  Sum (A.points) POINTS_OR_MILES_CREDITED,
  SUM (CASE WHERE the a.points is null THEN a.transactionamount ELSE a.points END),
  The ACCRUAL one
  JOIN dc datecal ON dc.dateid = a.postdateid
  Join MemberALL m on m.memberid = a.memberid
  WHERE a.awardnumber IS NULL
  AND a.accrualtype = 'B '.
  GROUP BY a.postdateid - To_char (fnc_get_date_for_dateid (a.postdateid), 'DD-MON-YYYY')
  ORDER BY a.postdateid;
  ==========================

  Thank you
  Slokam

• Need for a function defined by the user in order to obtain a weighted average

  Hello

  We have a table where we want to device the weighted average for a column of prices below using formula,

  sum (quantity * price) / sum (qty)

  We have a few lines where part or all of the columns that is price or quantity can be NULL.

  We have tried to write the function as follows however, it fills even after 30 minutes, where as we have the addition of this feature request could was completed in 25 seconds.

  Please note that we are dealing with big data i.e. the table could have 50 million records. It has appropriate indexing and other components to improve performance required.

  We know that we did something wrong in the creation of feature below, but we are unable to resolve

  CREATE OR REPLACE FUNCTION "WEIGHTEDAVGPRICE" (PCOLNAME NUMBER( ) RETURN NUMBER

  IS

  TEMP NUMBER (26,13);

  BEGIN

  SELECT SUM (QUANTITY * PCOLNAME) / SUM (QUANTITY) IN TEMP DE FEES;

  RETURN TEMP;

  END WEIGHTEDAVGPRICE;

  
  

  Here, we send the parameter THAT PCOLNAME represents the name of the price column we want to do a weighted average.

  
  

  We know we could do this without adding a feature, but we need instructions BOX, and then in our SELECT clause. We use toplink to query the database, in this case, it will be difficult to covert.

  Also, we want this function to be used in other places as well.

  
  

  Thank you

  @Bhagyesh KNW
  

  
  

  
  

  The reason for the decrease in performance when you use the function, you call the function from a query and which is originally a context switch between SQL and PL/SQL engines.  That is known to slow down performance.  If you can only do the task in SQL, you must do so, in order to avoid context switching.

  It would be useful that you provided a few sample data and expected the output, as indicating the version of your database, so that people can understand and help you better.

  Please read:

  Re: 2. How can I ask a question in the forums?

• You can use local drive as the mapped drives raw groups

  We have a new host with vShere4U1 installed on a couple of mirrored disks.  The host will initially run a SQL server and the operating system will be SAN (fibre) as all of our other machines are virtual host.  We do not have enough space on the SAN or the budget to upgrade to allow us to run the newspapers/Db SQL, then the host was purchased with an extra 14 discs (much less expensive) who were divided into two disk RAID groups 1 + 0 (410Gb & Go 540)

  I can attach disks locak to the host, but it is shaped as a vmfs and the dbo wants to use these discs as raw as he wants to use the size of the set and is limited to 256GB VMDK in the vmfs.

  Is there a way to present records in vSphere while they give me the opportunity to fix to the virtual machine as raw disks similar to the san, or in any other way.

  I'm a pretty confident user of ESX without being an expert (admin typical average closed sys - too many hats) and basic linux would be appreciate some comments/help.

  Home - HP DL160 G6

  See you soon

  If you remove the data store and then choose a block size, you can have a data store up to 2 TB in a single LUN. If you need you can extend the data to 62 to using extensions store.

  You really want to use raw disks. I don't know if it is possible anyway.

• You can use NI 9237 for the LVDT readings

  Dear comrades,

  I wonder if I can use NI 9237 and NI 9945 to get the reading of an LVDT. The interest is to measure the movement using Solartron DC Miniature LVDT.

  In our laboratory, we have NI 9237 and NI 9945 and I would get your advisor if it would be good enough to measure the movement of an LVDT.

  Thanks in advance.

  Hi Gtharm,

  For the Solartron DC Minitature LVDT transducer already includes oscillator, demodulator and filter which alow the sensor to accept the input voltage and provide a DC output from the position. Therefore, instead of using the bridge according to the measure such as the NI 9237 or NI9945 modules, you must only input I take the input voltage.

  The LVDT voltage range would determine which modules HAVE you need to take the measure. Of the specification, you need to at most 100 Hz to get the signal from the probe safely.

  I hope that this help mate.

• You can use a flex in the context of an entire web page application?

  Hi all

  Have a quick question. I happens during a flash development background, and I have small flash files that are commonly used as 'part' of a whole web page.  For example, a section of small videos with a flash drive combo box to select the video to play; This swf file would be sized at 600px wide comments by 400px high. Then I just put it in a div tag and add it to my web page.  I'm doing it with flex, but I'm running into issues. It seems that the actual published swf wants to run 100% of the size of the browser window. I tried to adjust these dimensions; first try in flex to the < application > Accessories for height and width, but that has not been around. then tried to just use the file .swf published in the web page and set its properties for < object > to my height and width, which works 'almost' but always falls apart when video player full screen touch.

  So, is it possible to use a flex "app" as part of a web page, or was flex intended to operate on its own and 'no' in the context of a web page? Thanks in advance!

  You can certainly. I usually drop the Flash/Flex application in a div "mainContent" in my larger page structure, so my page should look like this:

  BLA
  BLA

  
  ID = "MyFlashApp" width = "100%" height = "768".
  codebase ="http://fpdownload.macromedia.com/get/flashplayer/current/swflash.cab" > ".
             
             
             
             
             
  play = "true".
  Loop = "false".
  quality = "high".
  allowScriptAccess = "sameDomain".
  Type = "application/x-shockwave-flash".
  pluginspage ="http://www.adobe.com/go/getflashplayer_fr" >. "
             
     

  Note that I am only using the HTML approach, but the Javascript should work just as well. With the flash set to width = 100% and height = 100%, it will fill the enclosing div, but that's all. So, if you wanted to extend vertically but not horizontally, just set your CSS style to height: 100% and leave width px or em value. Note that the bounding div (that is if you had a wrapper around the NAVs and mainContent div) will also expand/collapse.

  I don't know the impact of the course full screen, if.

• You can use video fv to the DVD Format through Windows DVD Maker

  A fv format video is downloadable to dvd through dvd windows creation?

  Hello
  I don't know if you wanted to designate the type of file .flv or fv. In any case.
  Windows DVD maker generally supports these file types:
  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv
  Audio files: .aif, .aifc, .aiff .asf, .au, .mp2, .mp3, .mpa, .snd, .wav, and .wma
  File Picture: .bmp, DIBs, .emf, .gif, .jfif, .jpe, .jpeg, .jpg, .png, .tif, .tiff and .wmf
  [Please make sure you have the right codecs (audio and video)]
  If you are unable to load your video file in Windows Dvd maker, you can download a free video converter that is very simple from the following link:
  http://www.DVDVideoSoft.com/products/DVD/Free-3GP-video-converter.htm
  With this simple software you can convert your video to AVI video file type that is easily supported by Windows Dvd maker

• You can use variable substitution in the Calc script.

  Hi guys,.

  I want to use variable substitution in the calculation script. I v_SECSUBAREA that my substitution variable and its value would be like C12.00 or C13.00 or C12.00, C13.00.

  But it gives me error mentioned below by checking the syntax of the calculation script.

  Error: parsing formula [statement of DIFFICULTY] (line 15) 1200315 error: invalid object type

  Calculation script:

  -----------------------------
  

  FIX (& v_CLEARYEAR, & v_CLEARMON)

  FIX (& v_SECSUBAREA)

  DIFFICULTY ('REPGBP', 'REPEUR', 'REPUSD', 'local', @DESCENDANTS ("DIVISION"), @LIST(&v_SECDNBENTITY), @DESCENDANTS ("SubAnalysis"),

  @DESCENDANTS ("RTNROW"), @DESCENDANTS ("RTNCOL"))

  CLEARDATA "RESUB."

  ENDFIX;

  ENDFIX;

  ENDFIX;

  Variable substitution:

  ----------------------------------

  PRC

  COR_ALL

  v_SECSUBAREA

  C12.00

  Calculation script does not have C12.00 as the value for the variable substitution. If I give FY15 then Script gives me a correct syntax.

  Please help me to get this resolved.

  Thank you

  Shruti

  Hello

  Assuming that you calculate in the PRC. Database COR_ALL.

  You may set the C12.00 value in quotes like "C12.00".

  Kind regards

  Philip Hulsebosch.

• How to call the function defined by the user

  Hello
  
  I need help...
  In my project, I have page Login.jspx where there is a user name text box.
  I second success.jspx page that has its bean class of success.java I define a method "display(). Now, I want to display() cal on my success.jspx page.
  
  can anyone help me what is the way to do it.
  
  Thanks in advance...
  
  Thank you
  Nehal

  Hello

  I think we can declare the variable txtVal of chain in the world or outside of the method and create the Set accessor method and the Get accessor.
  Then, we could try to access the value like this...

  value = "#{backingBeanScope.backing_FrgtPwd.txtVal} '"

  ~ Abhijit