You cannot change the settings of my Toshiba Power Management

Similar Questions

• You cannot change the settings of UAC with the guest account

  adadadsadadsada

  You cannot change the UAC settings through the guest account. You must be an administrator to perform the operation.

• You cannot change the settings of the source of #R3d

  Hey guys,.

  I did a project on the 5K EPIC and modified by means of frame rates, now I'm trying the RAW settings and 'the source settings' can be clicked.

  I'm doing something wrong?

  These settings are now loaded the clip in the Source monitor Panel, switch to tab effect and then Options to pass on the master sub-tab.

• You cannot change the administrator account

  Original title: sdasdasdas

  I ca't change on my computer, my OS is windows 7 when I try to change administrator, it asks for a password when I put my password it say "" connection failed: the user did not request type of login on this computer "for this reason I'm stock on my user account and I can not install all the tools" because he has an administrator privileges. pls help me. ?

  Hello

  It seems that you cannot change the administrator.

  Perform the steps mentioned below and see if it helps.

  a: Click Start and type gpedit.msc in the Start Search area and press on Enter.

  b: Navigate to the following location
  Computer configuration / Windows Settings / Security Settings / Local political

  c: Under this click user rights assignment.

  d: Double-click access this computer from the network and verify that EVERYONE is added to the list.

  e: Otherwise add it by clicking Add a user or group , and then type EVERYONE, click OK and then apply and OK.

  Hope this information helps.

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• You cannot change the time zone

  I lived in the Central time zone for more than 30 years, but my Windows 7 computer has turned to the Pacific time zone and does not allow me to change the Central time zone?

  OT: Windows 7

  Hi Robert,.

  Thanks for posting your question in the Microsoft Community.

  Of the question above, you are not able to change the time zone.

  What is the accurate and complete error you get when you try to change the time zone?

  Method 1: Setting the clock
  http://Windows.Microsoft.com/en-us/Windows7/set-the-clock

  See also, Synchronizing with a time server Internet, from the link mentioned above.

  Method 2: I suggest you try the steps from the following link:
  
  You cannot change the time and date if the time zone is set in Samoa (UTC + 13:00) and Ko 2657025 is installed in Windows 7 or in Windows Server 2008 R2
  http://support.Microsoft.com/kb/2660075

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Tecra A10 - cannot change the settings of the BIOS with supervisor password enabled

  Hello
  I activated a supervisor for 1.50 acpi BIOS password.

  Since then, I am not able to change the settings (for example etc. - the right of the screen of the BIOS boot order does no more).
  I access the bios with pressing ESC on the boot process, then F1 when prompted "" check system, then press [F1] key. Problem is that I don't ask the supervisor password.
  There should be a prompt for the supervisor password, but it's not. So I am not able to connect as a supervisor.
  I know I can manually change the boot sequence by pressing F12 during startup, but this strict solve my problem.

  THX in advance
  elitecamper

  Have you tried to update the BIOS? On the Toshiba site, I can find a newer version that you have right now. Check it!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before setting a supervisor password load default settings in the BIOS and then you can set the password and try again. Maybe it works.

• You cannot change the format of the cursor

  Original title: mouse cursor

  Cannot change the format of the cursor; message says no file found - for example, C:\WINDOWS\Cursors\arrow\_rl.cur

  _rl.cur is not a slider that comes with XP. Nor is the folder named arrow. You must have installed a 3rd slider party system and I guess you are trying to change that.
  Try to reinstall it.

• Cannot change the settings on the computer. No access to the administrator account

  Original title: I can't access permissions to change settings or programs.

  I can not access permissions to change any settings or programs and do not have access to an administrator account, I tried what allows one but you must have admin permission to do so. Please point me in the right direction, it seems that Ive tried everything. ID realyy don't want to spend money on software

  Hi Christophe,

  -With which user account you have connected? It is a standard user account?

  -What happens when you try to change the settings? You receive an error? In the affirmative, please let us know the exact error message.

  Since you are not able to create an administrator account, I suggest you to enable the built-in Administrator account.

  1. you must start the computer by using the Windows 7 installation media.

  Follow the steps in http://windows.microsoft.com/en-us/windows/what-are-system-recovery-options#what-are-system-recovery-options=windows-7 to enter the recovery options in Windows 7.

  Note: See the manual of the computer to change the Boot order in the BIOS and set the CD/DVD as first boot device.

  2. Once you start the computer by using the Windows 7 installation disc, follow the instructions on the screen then go food Advanced Options and select command prompt.

  In the command prompt, type net user administrator / Active: Yes

  After the command finishes, restart the computer and then log on to the administrator account by default, change the account type of the old user account and make as administrator and check if you are able to change the settings.

  Follow the steps in the http://windows.microsoft.com/en-in/windows7/change-a-users-account-type to change the account type of the user account.

  Once you have set the administrator type account with your user account, disable the default user account by following these steps.

  1. login to your user account.

  2. open the command prompt, type cmd. exe in the run search and right click on cmd.exe and select Run as Administrator.

  3. type net user administrator / active: No.

  This will disable the built-in Administrator account.

  Hope this information is useful.

• Cannot change the settings after the take snapshot in VM

  Hello forum, I need to increase a disc size and the number of virtual processors on couple of virtual machines, the last week I have instant tool of these virtual machines. Today, when I try to change the settings, I see that the options are grayed out. Why is it so? This is a limitation of vmware. Do I have to delete the snapshots before making changes? Which will remove the ability to roll back changes if necessary. I'm under Windows 2008 R2 virtual machines.

  Virtual disks can only increase if they have no active snapshots. The snapshot files contains modified data blocks that correspond to their parent records, and this mapping I lost if you have increased a virtual disk with snapshots.

  André

• You cannot change the chart value axis when there are several types of graphics in a single diagram

  Illustrator can do graphics with bars and lines / columns, for example in the docs:

  

  http://help.Adobe.com/en_US/Illustrator/CS/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html

  However, when I create a chart like this, I seem to lose the ability to manually set the y-axis using 'override calculated values.

  To reproduce this problem:

  1. Create a chart as in the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers as well as the lines align perfectly - have a go until just less than 20, a up to a little less than 250, therefore it do not markers and the number of divisions on each side.
  2. Try to make the markers and numbers of divisions to the height, so in fact, the side that is going up 20 going up to 25 and has the same number of divisions on the other side.

  Everything I have tried does not work:

  • If I select the entire chart and go to the "Chart Type", I can not set the options for the value axis. In earlier versions, it's gray, in CS6 I can access, but clicking on 'OK' does nothing.
  • If I select the entire chart and chose the type of a chart, I can set options for the axis value, but that the selected chart type, and then applies the entire table.
  • If I use the direct Selection tool to select one of the series and open the "Chart Type" options, changing the options of the y-axis has no effect
  • If I use the direct Selection tool to select all series that share an axis and open the "Chart Type" options, changing the options of the y-axis always has no effect
  • If I use the direct Selection tool to select the Group of ticks axis itself, or the axis line and groups of ticks axis themselves, of axis labels, axis and graduations of the axis line, or axis labels, axis line, graduations of the axis and series of related data, etc., by changing the options of the axis also has no effect

  It seems that this feature is broken and it seems that the example in the manual has been carefully chosen to use a rare combination of numbers where it would actually look right.

  I thought about it. Like everything to do with the horrible ancient neglected graphic Illustrator tool, it is ridiculously clumsy and involves the caution around what is shamefully bad programming for a professional expensive product.

  It is timing - to do things in a sequence of rigid counterintuitive that seems not to work then meets at the end:

  1. Create the chart but, for now, keep all the same chart type. If you've already set to have different graphics types, put the same thing for now.
  2. Select the entire chart and in the main window of Chart Types, set the value to "Both sides" axis
  3. In the drop-down menu, there should be a left and right axis (or top and bottom...). Set the parameters of the value axis for these now. It will look like it does for a single axis, because it will not change the other axis - naked with her...
  4. Select the data series you want to use the other axis using group selection. Go to graph Type and the value of the y-axis to the other and set the chart type that you want. All of a sudden all be put in place.
  5. If you need to change the settings for the value axis, select the entire chart, set the whole chart type to a chart, change the appropriate value axis by choosing it from the menu drop down and the re - apply types of graph as above.

  (the bug is - it should not necessary to set the graphic object to only have only one chart of type in order to access the axis options of value for two different y-axis)

• You cannot change the ID Icloud

  I was forced to change my Apple ID because I changed my e-mail server.  I never put my ICloud for my Ipad and phone in place on my old ID and now I can not figure out how to change my id Icloud on my Ipad/phone, so I can set it up?  Technical support Apple didn't tell me that I would have no problem with this when I changed my ID but now when I go to the tab in my Iphone Icloud and I paved lists my old Apple ID without any possibility of change anywhere.  There is an Edit tab but which simply allows you to change your name and add a picture if you want, but the old address is grayed out and I can't access it.

  OK, so did you just changed the identifier on your Apple account Apple existing to the new address or haven't set up an Apple account nine for your new ID?

  GB

• Changing the cursor for a helping hand in the text and you cannot change the sentence or paragraphs in boxes to listen audio mode

  In Acrobat Reader if you're going to see menu and scroll all the way to ' Read out Loud ' and activate it, you can listen to the texts.  And you can also take the blinking cursor and click on the sentence or paragraph and a box turns around the sentence or paragraph and reads within the selected text.  But in Acrobat DC the cursor flashing in the text box has changed to a f * k * g hand grabber and you stop to select whatever it is!  How can we change back the hand f * k * grabber g in a cursor blinking so I can choose the text I want to listen or to highlight or mark?  Can someone help me on this?

  Hi dales45194090,

  You can change the options to use Select or hand tool under Edit > Preferences > General

  Also, if you have selected "use keys.. accelerators" option, then you can simply press V as the shortcut key for the selection tool.

  

  Kind regards

  Ana Maria

• You cannot change the configuration of the host

  I have stop my vm which is on san emc readers and he zoned for a second esx server.

  When I scan I can see the disks but I do not see a data store. then I try to add storage, signature of Dungeon and he tells me "cannot change the host configuration.

  (1) what I do 2) I tried vmotion and it did not work

  What is happening in vCenter, correct?  I had this happen in beta.  Connect to your ESXi host and then 'add a storage '.

• This folder is located in the windows folder: $NtUninstallKB36574$ It is not available and you cannot change the security settings.

  This folder is located in the windows folder: $NtUninstallKB36574$
  It is not accessible.  I can't change the security settings.
  It is the remains of an outbreak of the virus.
  I saw that on 2 client computers this course last 6 months.
  So, how is it possible for an inaccessible folder to administrators?
  How can I change the security settings to remove.
  After you run several virus cleaners, I'm pretty sure that the virus has disappeared.
  Ideas?

  You should be able to remove it from the command prompt in Windows Repair Mode.