You cannot request signatures of COD

I formatted my pc and reinstalled JDE. I have RBB, CPR, RRT RIM files. When I try to ask the signature, I get the following popup error message:

Impossible signatures request until that this request has been saved with all the powers of signature required

Someone guide me on how to do. Unfortunately, I forgot my PIN, but I can remember the password.

Contact RIM. [email protected]

Tags: BlackBerry Developers

Similar Questions

  • Added that another point of entry but now cannot request signatures

    I added a project in my workspace to be used for another entry point that will 'init' for the main project to add backup / restore features of my persistent data. However, since the addition of this project the opportunity to "Request for signatures" to sign my application is greyed out.
    I followed the instructions in the guide to the BlackBerry Developer about adding a project to a different entry point.

    Serving as alternative entry point is in the same workspace as the right of the main application? If I remove the new menu item entry alternative app to request signatures returns to normal.

    Well, I don't understand what the problem was, but I solved this by doing a new workspace and adding 2 projects. I couldn't make it work with the existing my original project workspace.

  • "You cannot request the signature...". »

    All of a sudden, when you use the signing tool to request a signature, I had 'unable signatures to demand up to that this request has been saved with all the powers of signature required'. I have been using the app for a long time signature tool.

    any idea on how to solve this problem?

    Thank you

    You must place all the files *.csi and sigtool.* (signing keys files) in the folder with SignatureTool.jar (JDE/bin).

    Without these files, it will not work and will display this message for each cod file that you are trying to sign.

    Seems that you have installed additional JDE and the JDE/bin does not contain these files.

    Copy these files to each JDE/bin folder on your computer.

    This will help you.

  • FAL [client]: you cannot request the gap sequence

    OTN community,

    Database: Oracle 10 g 2 group patch 3
    Operating system: HP - UX v.11.31

    I have a problem with the gap on the physical database archivelog ensures. You can very well below outputs;
    SQL> select * from v$dataguard_status;
    
    FACILITY                 SEVERITY         DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP           MESSAGE
    ------------------------ ------------- ---------- ----------- ---------- --- ------------------- ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Log Transport Services   Informational          0           1          0 NO  18/07/2010 02:56:28 ARC0: Archival started
    Log Transport Services   Informational          0           2          0 NO  18/07/2010 02:56:28 ARC1: Archival started
    Log Transport Services   Informational          0           3          0 NO  18/07/2010 02:56:28 ARC0: Becoming the 'no FAL' ARCH
    Log Transport Services   Informational          0           4          0 NO  18/07/2010 02:56:28 ARC0: Becoming the 'no SRL' ARCH
    Log Transport Services   Informational          0           5          0 NO  18/07/2010 02:56:28 ARC1: Becoming the heartbeat ARCH
    Log Apply Services       Control                0           6          0 YES 18/07/2010 02:57:15 Attempt to start background Managed Standby Recovery process
    Log Apply Services       Control                0           7          0 YES 18/07/2010 02:57:15 MRP0: Background Managed Standby Recovery process started
    Log Apply Services       Informational          0           8          0 NO  18/07/2010 02:57:20 Managed Standby Recovery not using Real Time Apply
    Log Apply Services       Informational          0           9          0 NO  18/07/2010 02:57:21 Clearing online redo logfile 1 /usr/ORACLE/u02/KNWA_redolog/redo01a.log
    Log Apply Services       Informational          0          10          0 NO  18/07/2010 02:57:21 Clearing online redo logfile 1 complete
    Log Apply Services       Warning                0          11          0 NO  18/07/2010 02:57:21 Media Recovery Waiting for thread 1 sequence 354977
    Log Apply Services       Informational          0          12          0 NO  18/07/2010 02:57:21 Fetching gap sequence in thread 1, gap sequence 354977-354985
    Log Transport Services   Warning                0          13          0 NO  18/07/2010 02:57:52 FAL[client]: Failed to request gap sequence
    Fetch Archive Log        Informational          0          14          0 NO  18/07/2010 02:57:52  GAP - thread 1 sequence 354977-354985
    Fetch Archive Log        Informational          0          15          0 NO  18/07/2010 02:57:52  DBID 1228244844 branch 688497708
    Log Transport Services   Informational          0          16          0 NO  18/07/2010 02:57:52 FAL[client]: All defined FAL servers have been attempted.
    
    16 rows selected.
    
    SQL> archive log list;
    Database log mode              Archive Mode
    Automatic archival             Enabled
    Archive destination            /usr/ORACLE/archive/KNWASTBY/
    Oldest online log sequence     354990
    Next log sequence to archive   0
    Current log sequence           354992
    More old newspaper online sequence is 354900, but he tries to retrieve the sequence 354977-354985. I don't want the database to extract the old archivelogs since the YVERT database and controlfile is up-to-date. I really don't understand why he keeps trying to get the old archivelogs in the primary. I already deleted the archivelogs and I applied the last backup on the standby site.

    How can I omit these old archivelogs and leave the unapplied archivelogs applied to the standby database.
    SQL> select sequence#,applied from v$archived_log;
    
     SEQUENCE# APP
    ---------- ---
        354987 NO
        354990 NO
        354989 NO
        354986 NO
        354991 NO
    Log shipping is correct and the standby can trace switches archivelog perfectly.

    Thank you in advance.

    Ogan

    Published by: Ogan Ozdogan on 18.Tem.2010 03:07

    Another question, how can I change the standby controlfile controlfile to understand the database didn't need than archivelogs more?

    Ogan

    Thanks ogan.

  • You cannot request to applescript "If file exists" "else".

    Hello everyone!

    I've been Googling for hours for this. Could not find anything.

    I thought it would have been quite simple: get applescript to do a check to see if a file exists, and do something. If it does not exist, do something else.

    My script is as follows (more or less):

    game file_yes (("~ /") & 'File.txt')

    say application 'Finder '.

    if there are file file_yes then

    the shell script "SHELL SCRIPT" with administrator privileges

    say application "Finder" for display alert "Shell Script complete!"

    Try

    the shell script "rm ~ / FILE.txt" with administrator privileges

    end try

    on the other

    say application "Finder" display message "No file!"

    end if

    end say

    You must use a Mac OS X-style path when it comes to the Finder:

    If there is the file "File.txt" of the House then

    (137423)

  • NVIDIA GeForce GT 220 M this device cannot work properly until you restart your computer. (Code 14)

    NVIDIA GeForce GT 220M
    This device cannot work properly until you restart your computer. (Code 14)

    Click on reboot to restart your computer

    The restart does not solve their same message reappears.

    Have you tried reinstalling the drivers from here? (they can be more recent)
    http://www.GeForce.com/hardware/desktop-GPUs/GeForce-gt-220/

    I hope this helps.

  • Cannot get the unlock code

    There is a bug when you try to request an unlock code for the device.

    https://Motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-b

    There is a 500 error (HTTP code) when you press the request button. It's a problem aside server and must be fixed immediately so that users can get a code.

    Try refreshing the page and signing-in before trying to apply the code.

  • Cannot start device USB (code.10) error

    Original title: device usb ayre

    Cannot start this device (code 10)

    Hello

    1. what operating system is installed on your computer?

    2. don't you make changes to the computer until the problem occurred?

    I suggest you try the steps from the link below and check if it helps.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers: http://support.microsoft.com/kb/943104

    Hope this information is useful.

  • ERROR CODE KB 970653 CANNOT UPDATE ERROR 800706431 CODE

    ERROR CODE KB 970653... CANNOT UPDATE... 800706431 ERROR CODE. DIDN'T TRY TO UPDATE SEVERAL TIMES NO LUCK. CAN ANYONE HELP PLEASE

    Eileen,
    I need you to check the error code that you found.  The one you posted is 1 number more than normal.  If you go to Windows Update, then select "View installed updates", it will show you both the updates failed.  Double-click the update failed and get the error code of the info box.

    You can also check this article: Troubleshooting Windows Update Installation questions
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • A security update for Microsoft Office 2003 (KB2598361) cannot install with error Code: 0 x 80070643

    A security update for Microsoft Office 2003 (KB2598361) cannot install with error Code: 0 x 80070643.

    He did this repeatedly over and over again all week.

    How can I fix it?

    Hello

    Method 1: download and install the update manually and see if it helps.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=30294

    Method 2: Perform the steps from the link below and see if it solves the problem.

    You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services

    Hope this information helps.

  • A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

    A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

    Hello

     
    You are able to install other updates successfully?
     
    See the methods mentioned below and check if that helps.
     
    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the troubleshooting steps in the clean boot, follow steps to configure Windows to a Normal startup State of the link section to return the computer to a Normal startup mode.

    Method 3: Follow the steps in the article.

    How to reset the Windows Update components?

    Method 4:
     
    You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
    Hope this information helps.
  • Cannot copy file: cannot read the source code or drive WINDOWS XP

    I'm trying to transfer pictures on my old XP computer on an external hard drive.  After performing a backup on the drive hard seagate WD I went looking for pictures on the external hard drive, and they aren't there.  I went back on the XP machine and tried to copy the files to a CD but I get the message cannot copy file: cannot read the source code or the player.  I can open images but cannot move it to another folder or copy and paste pictures anywhere.  The photos are saved in an outdated version of microsoft's digital imaging software.  Help, please.

    Hello

    (1) is the specific question of the images?

    (2) where the images are on the computer?

    You can try the following methods and check the status of the issue.

    Method 1:

    Configure the computer to clean start State to check software conflicts. See the following link on how to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 4 of the above article.

    Method 2:

    If the problem is specific to the pictures folder, then it might be a problem with permission. You can try to take ownership of the folder and check if you can transfer it. read the following article.

    How to capture a file or a folder in Windows XP?

    http://support.Microsoft.com/kb/308421

  • Request an activation code for Windows due to hardware changes, but nothing has changed. What is going on?

    My computer is request an activation code for Windows due to hardware changes but nothing has changed.  What is going on?  This morning firefox did not and went into the Task Manager to see which processes were underway, then he closed the Explorer.  I think I clicked on it by mistake.  Then turn on now that I get this message.

    Go ahead and try to activate it? (copy is authentic, came on the computer already installed)

    Hi JaneMcDonald,

    Yes, you can go ahead and activate Windows XP, as it could be a possibility that the software license file may have been changed due to some changes.

    How to activate Windows XP

  • Cannot install updates error code ox652

    my installation failure code is 0 x 652 help?

    Hello

    1. the problem occurs on all the updates?

    Follow the methods below and check if the problem persists.

    Method 1:

    I suggest that you follow the steps mentioned in the articles below and check if the problem persists.

    You cannot install some programs or updates
    Cannot install Windows updates

    Method 2:

    I suggest that you put your machine in a clean boot State, then try to install the updates.

    Note: Do not forget to start your computer in normal mode.

  • 0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

    Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • Error 0X803C0107

      Details of the editor for Windows Firewall troubleshooting

      Verified issues

      You cannot access shared files and PrintersYou cannot access shared files and printers

      You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked

      No workingRemote Assistance remote assistance does not

      When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked

      Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall

      On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked

      Windows Firewall service is not his firewall service is not started

      Windows Firewall service is not running or is not started. Checked

      Issues checked the details of the detection

      6 you cannot access shared files and printers checked

      You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.

      Unlock the file and printer sharing in Windows Firewall works not

      To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.

      6 remote assistance works not verified

      When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.

      Allow Remote Assistance in Windows not running Firewall

      Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.

      6 Windows Vista could not start Windows Firewall check

      On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

      Set permissions for the registry keys concerned not run

      Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.

    6 Windows Firewall service did not start Checked

    Windows Firewall service is not running or is not started.

    Start the Windows Firewall service is not running

    Start the Windows Firewall service solves this problem.

    Details of detection

    Collection information

    Computer name: NORMBRESINSKI

    Windows Version: 5.1

    Architecture: x 86

    Time: 09-20-2010 07:51:49

    Publisher details

    Troubleshooting Windows Firewall

    Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

    Package Version: 1.0

    Publisher: Microsoft Corporation

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  • Hi Rickbsk,

    You can check out the link and check the suggestions provided by scotty1294.

    http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

    If you have not tried all the suggestions above, try and see if it helps.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • Re: Downgrade Windows XP for Portege R700-1E0

    Hello In my company, we will buy 3 computers portatil model Portege R700-1E0The staff of our computers is installed in Windows Xp.My question: is it possible to make the downgrade to Windows XP? Post edited by: GROSADO

  • How to add listbox form in string array objects

    Hello I need help related to listbox 1. currently, I am able to select and implement string in array Prob is ex. When I select the point 1 and 1 point will be created on arrayString but when I select article 2 and article 3 then arrary string poster

  • HP dv6 6140tx: Ram compatibility

    My laptop have received 2 slots and is expandable up to 16 GB. The laptop came with Ramaxel 4 GB ddr3 1333 mhz ram (rmt3020ec58e9f-1333) in 1 location. Now, I want to add a 4 GB stick in the second slot to improve it to 8 GB. The same ram brand is no

  • Download from Gamehouse problems

    Player Windows media can not download files from Gamehouse, but replaces Real Player who will download them.  I swam for Real Player by default help?

  • Connect to my pc, but does not give me my profile

    It turns on and goes to my lock screen. Then I go to connect to my account and that he accepts and everything. Takes forever to access the home screen and then when he gets there, missing my customizations. He fell to the bone exposed, IE, Explorer o