'You do not have permissions for this item' - the HARDWARE SPECIFICATION

Dear members,

I'm trying to access a material specification, but I am constantly presented with the following message: ""you do not have permissions for this item.

Curiously, I could already access specifications but now I am presented with this.

I have the same problem with the profiles of LIO.

Does anyone have a known solution for this?

Kind regards
Advertisement

This happens usually when you do not have read permission according to the State of the workflow of the specification. Different permissions can be set up for different status in the Administration of the WFA (WorkFlow).

In addition, if you use business units as a safety feature (rather than just BU visibility), you might get this message. In this case, you should not be able to see this specification in a search result, though, so if you see in the results of material technical search page, is not a DRINK problem, it's a workflow issue permission to read.

There is an additional possibility, that is if your team has put in place the extensibility point of SpecVetoHandler, which allows for personalized reading permission checks added. It is a technical extensibility point configured in the config file CustomPluginExtensions.xml.

But more likely, it's a workflow permissions problem. You should ask your users to s Adminitrator of workflow.

Concerning
Ron

Tags: Oracle Applications

Similar Questions

  • whenever I try to, the open, Tunes, I have, get, message:, the file, "Ditties", is, on, to, locke d, drive, or you do not, write, permissions, for, this, file., Suggestions, to get on the past, this?

    whenever I, try to open it, Tunes, I have, get, the, message:, the folder, "Ditties", is, on, to, locke d, drive, or you do not, write, permissions, for, this, file., Suggestions, to get over the past, this??

    How about you post that again without commas and maybe then I'll read it?

  • Nokia iTunes Library .itl is locked on a locked disk or you do not have permission for this file

    Nokia iTunes Library .itl is locked on a locked disk or you do not have permission for this file

    Hello

    When you get this error message?

    Follow the steps below and check if that helps.

    Method 1:Follow measures to take in charge of the case.

    1. open Windows Explorer and locate the file or folder you want to take charge.

    2 - Click on the file or folder, click Properties, and then click the Security tab.

    3. click on advanced and then click the owner tab.

    4. click on edit and then do one of the following:

    To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.

    To change the owner to a user or a group is listed in the change owner to box, click the new owner.

    5. (optional) to change the owner of all subcontainers and objects in the tree view, select the Replace owner of subcontainers and objects of the box.

    Method 2: Follow the steps below and check if that helps.

    Change the permissions on the folder / my music/itunes (and all subfolders and files) so that it is not "read-only".
    Here's how:
    a. by doing a right click on the name of the iTunes folder, and then select Properties.
    b. you will see the read-only check box. Make sure it is disabled.

    Topic: iTunes Library.itl file is locked
    http://discussions.Apple.com/thread.jspa?threadID=2678797&TSTART=0

    Topic: iTunes Library.itl file is locked on a locked disk or no write permission
    http://discussions.Apple.com/thread.jspa?threadID=2051801

  • EPMFDM-140301: cannot retrieve members. The target is not available or you do not have permissions to access the target application

    Dear friends,

    I have this error when clicking on the value target in the loading map.

    EPMFDM-140301: cannot retrieve members. The target is not available or you do not have permissions to access the target application.

    But my HFM application is running and I can show members in the application of HFM. Through the mapping of FDM, I'm not able to view the list of members in target value.

    Please give me the perfect solution for this.

    Thanks in advance

    Concerning

    Satheesh.S

    Thanks for your quick response

    Again added my application target, include membership lists.

    Concerning

    SS

  • "You do not have permissions to access this folder" after copying the files on server 2012R2

    Recently, I've copied the 600GO files and folders using Robocopy from 2003 to 2012R2. No problem with the copy, but the properties of the root of the copied files showed a number of size and file incorrect directory to the same directory on Server 2003.

    Pursuit of the investigation, it seems that even if I am in a group of security on all files (with full control), I can't navigate some of them. When I select some files, I get a popup saying "you don't have permissions to access this folder." If I click on the "Continue" button, I also have access to the folder.

    When I check the permissions applied to the folder, it shows my group listed (with full control in the source files) and now added my user account security and given full control permissions.

    Anyone can shed light on what is happening here?

    To answer my own question, I just find some information about it and it is linked to the good old UAC.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/9061bc1c-42EA-47ed-8c7d-56b07139fb86/you-don ' t-currently-have-permission-to-access-this-folder-click-continue-to-permanently-get-access?forum=winservergen

  • Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item

    Allright guys. I'd like to say hi first. I had a huge problem masive. Sonyvegas I, and when I tried to use a keygen, it says Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item"I did everything what I have seen here, run as administrator, I checked the administrator conrol Panel and im, I disabled antivirus (avira), firewall disabled, nothing works! And I would like to know if someoen can use teamviewer? and see what is wrong with my pc. I have win7, x 64...
    my Skype: vladutzrmx
    MSN: * e-mail address is removed from the privacy *.

    Hi XDivine,
    We cannot provide you with help on how to hack software

    Eddie B.

  • You do not have permissions to open this document

    Quick story:

    Today, we have installed a new copier Konica Minolta. In the process of implementation of scanning via SMB, I created of new usernames on each workstation called "scanner" and gave this user a password. Then, I created a folder on each desktop called scans. I shared this folder and set it if the two users (user principal & scan) have access in writing & reading.

    The question that I have is, what it is written in that file the scanner is read & write to 'scan' and no other users do not have access.

    Is there a way I can resolve this issue so that new items saved in the folder have read and write for all users place?

    You tired doing a Get Info (command - I) on the record, unlock the padlock, and adding the user with read/write permissions?

  • Error: Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item

    So I can't access pretty much ANYTHING on my computer.  This problem is not related to a single file, it is akin roughly ALL of the files, it seems, I can not access to Mozilla Firefox, can not open anything, I recently downloaded, can't access "Add or Remove Programs" in my control panel, I can't open same notebook bitch unless I have order!

    I looked at a ton of different solutions for this and even turned off AVG, I am the system administrator and the only user on this computer.  I use a Windows XP.

    I tried the solution to the other very similar to this one question, and it did not work. NOTHING works, I noticed that at the bottom right of my toolbar where all my icons was that now that the control volume is. I don't know if this means anything but I'm trying to provide as much information as possible.

    Please someone help! I can't do anything on my computer, I use a very slow out of date version of internet explore right now and it is horrible because it's the only internet browser on my pc that will actually open.  Thank you!

    Hi Brett,

    ·         You did changes to the computer before the show?

    Method 1: You can run the Microsoft Safety Scanner to check if there is no infection on the computer. Check out the following link.

    Microsoft Safety Scanner - free online tool for PC health and safety

    Method 2: Try to create a new administrator user account and look for the question. You can connect in safe mode if you are unable to do it normally.

  • Error "Windows cannot access the specified device, file, or path. You can not have appropriate permission to access the item.

    Hello

    I have already read many answer to this problem here, but unfortunately none of this applies to me. I have a Windows XP and for some time I've always started some message when starting my laptop on rundll32.exe on my desk. I checked and I have this file in my system folder. Since this morning, I became suddenly unable to use any application like Skype, messenger other messengers etc. I can't even run my AVG scan for viruses and not can't open most of the programs in the control panel including Security tab / does anyone have an idea how can I get rid of this virus, or at least turn back my applications, I can use?

    Hi Platamon1980,
     
    -Remember to make changes to your computer after that this problem started to happen?
     
    First, try the steps listed in the following article to fix rundll error message:
     
    This problem occurs because of a missing or corrupted Rundll32.exe file.
     
     
    Check if this solves other problems also.
     
    Keep me updated on the status of the issue.
  • There was an error saving the files - "you may not to save in this location the administrator contact for permission.

    Original title: admin account is not acting as an admin account
    I am the admin of my laptop and when I need to edit some files today in record programs it wouldn't let me. He said: "you are not allowed to save in this location contact the administrator for permission" but I am the admin, then when I check the permissions for me everything is checked. Yet it still doesn't let me add files or record anything

    also, each folder in C: local drive when I click Properties read only is selected and when I uncheck and press on apply he says he he applied but when I check again it is still selected. yesterday everything was fine and I was able to install, move, or change the files that I wanted to

    is it possible to fix this?

    Hi Merrick Davis,

    1. When you try to save files?
    2. are you unable to make changes to only the files in the C drive or the discs?

    Try these steps and see if it solves the problem:

    Step 1: Create a new user account and see if you can save files using this account.

    Refer to this link for help:
    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    Step 3: Perform a system restore to restore the computer to an earlier point in time before the problem started.

    See these articles for help:
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Kind regards
    Afzal Taher-Microsoft Support.
    Visit our
    Microsoft Answers Feedback Forum and tell us what you think.

  • get the message: windows cannot access the specified device, path or file.you may not have permissions appropriate to access.

    I am the administrator and cannot open files or webcasting two other accounts of work very well.

    Your administrator account can are damaged.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I'm copying images from bridge on an external hard drive and the message that you do not have permissions. All ideas

    Hi Petergo

    What version of the bridge are you using?

    Please try to export the file to your desktop and see if you get the same error

    Also follow Troubleshooting of errors, freezes | Adobe Bridge | Windows, Mac OS and see it helps

    Concerning

    ~ Assani

  • PreSonus Studio One won't let me read the downloaded videos to unplug, the message reads "the licence has not been issued for this computer", the Logo ONe Sudio appear

    I downloaded a video of my own using the Firefox Addon to unplug myspace page. It saved in my files, but when I try to open it, I get a message that says: 'a licence was not issued for this computer. When I click 'ok', it brings me to the block Presonus Studio One asking me to purchase a license now. In fact, a licence was issued to this computer, and I understand that there is a problem with customers not getting Presonus does not properly established with the approval of their product. But it shouldn't stop me from playing my own videos on my own computer.

    Sorry, never heard of this software before. How are Firefox users able to listen to the music that is created b this software.
    A specific package of DRM?
    A specific plugin?

    As may of Adobe Flash?

    It seems that you have two plugins Flash for Firefox. Not a good idea because it may confuse Firefox. Try to get rid of the old version.
    Shockwave Flash 17.0 r0
    Shockwave Flash 16.0 r0

    Have you tried to get support through the PreSonus for one?
    https://forums.Presonus.com/

  • Windows 7 - get this message when you try to open a file. Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

    When I left click on the icon to open the file, I get the 17 ' error '. "  I right click on icon and select "run as Administrator'l and it will open, but lately it won't and the message above."

    Hi Bob,

    1. in open file are you get this error message?

    2. don't you make changes on the computer before this problem?

    This problem may occur if one of the following scenarios arises on your PC.

    • You do not have permissions for the file or the location of the file.
    • The file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer.
    • The file has been moved or deleted.
    • The shortcut or the file is corrupted.
    • The file may be blocked by Windows.
    • Your anti-virus software may block the file.

    Refer to the help article:

     

    Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file

    http://support.Microsoft.com/kb/2669244

    Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished. Use this workaround at your own risk.

    Response with more information to help you.

  • you do not have the necessary permissions this cette tache task for help, please contact adminatrator

    you do not have permissions to perform this task, please contact administrator help, im signed to ask administrator so why can I perform the task? Thanks in advance for your help

    Hello
     
    1. what operating system is installed on the computer?
    2. which task you perform?
    3. should he arrive with a particular task or tasks?
    4 you did changes to the computer before the show?
    Answer for you help the better.
    Follow the steps mentioned below and see if that helps.
    Right-click on the task and click Run as administrator
    You can also check:
    Suggestions for a question on the help forums

    http://support.Microsoft.com/kb/555375

Maybe you are looking for