you need to restart bigbrother rules changes?

When I change bbwarnsetup or bbwarnrules, I have to restart bigbrother or it detects the modified file and re-read?

I've always done a reboot, but I don't know if it's really necessary.

I know that changes in bb-hosts seem to be dynamically re-read, just wondering about the other configuration files.

Thank you!

bbwarn*.cfg files are re-read dynamically.

Note that under windows bb - hosts.cfg is not replayed. On Unix, in most cases, bb-hosts is re-read (bin/bbd not reread bb-hosts)

Tags: Dell Tech

Similar Questions

  • You need to reset and or change my old icloud account of moms on the phone with another. When I try to reset it with the information that we know that it says "blocked account"

    You need to reset and or change my old iCloud account of moms on the phone with another. When I try to reset it with the information that we know that it says "blocked account"

    ACCOUNT SAFETY CONTACT NUMBERS

  • I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system.

    I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system. I restarted several times now and get the same message. What should I do to ensure that this computer can be upgraded?

    Hello

    Run the windows Upgrade Advisor 7

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

    and repost in the windows forums OK 7

    Here is the vista forums

    Windows 7 forums on the link below

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

    Answers by topic

  • When I try to delete some folders, an error message appears saying 'you need permission SYSTEM to make changes to this file.

    original title: require authorization of the SYSTEM

    I decided to do a clean install of the latest Windows 7 RC yesterday and today crossed and have started to remove some programs on a separate hard drive so I could reinstall their own.  However when I try to delete some folders, an error message appears saying 'you need permission SYSTEM to make changes to this file.  I am using an administrator account, but I can't just simply delete the file.  I tried going to and change the owner to my account or administrators, close it, change the security permissions to allow me to have full control, and then I can finally remove it.  The problem is, I have to do for all the files one by one in the folder, and I wonder if there is an easier way to go about this, or if I can access the user of this SYSTEM and just delete them all from there.  Thanks for the help.

    Hello

    Not trying to resurrect the old discussions, but I'll answer anyway because this thread came on top of the list of search results when I searched for "you need permission to the SYSTEM; I hope this will help everyone.

    Note: here, "the record" as a subject refers to the folder that you want to remove.

    Step 1: Go to the built-in Administrator account, you can do so by following these steps:
    a. go to control panel > system and security > administrative tools
    b. on the left panel, go to local users and groups > users. You should now see a list of users on your computer
    c. right click on the administrator account that appears in the list and select Properties
    d. uncheck "account is disabled" and confirm by pressing OK

    Step 2: Connect to your newly activated administrator account

    Step 3: Now, we start to configure the security settings that will allow you to remove this folder which was (perhaps) held by the SYSTEM:
    I'm going to make the assumption that you want to remove a folder and all its subfolders along
    a. right click on the folder
    b. go to the security on the top tab
    c. click on the Advanced button which is at the bottom

    : Step 4 the first part to configure security settings to set the owner of the folder:
    a. go to the owner on the top tab
    b. click the button change located downstairs
    c. There should be a list of accounts to choose to change the property, this is located under the label "of a change in ownership:'"
    (d) the entry 'Administrator (YOURCOMPUTERNAME\Administrator)' should be there; If this isn't the case, then add it to the list:
    -Click on the button "other users or groups...". "who's down
    -Under the label "enter the object name to select (examples):', there should be a text field you can type into it;" type in "Administrator" (without the quotes of course)
    -Click on the "Check names" button which is located on the right. 'Administrator (YOURCOMPUTERNAME\Administrator)' should now be there _For itself_; Well, if not, then you must remove the line that does not represent the administrator account that you are currently
    -Confirm by pressing OK; It will now appear on the list of accounts, you can choose from
    e. now, select 'Administrator (YOURCOMPUTERNAME\Administrator)' from this list
    f. check 'Replace the owner of subcontainers and objects' to propagate our change
    g. press OK to confirm. a message should now pop-up window, which says to re - open the properties. Do by pressing all the buttons OK see you

    Step 5: now that we have the owner of the folder, we still not done. There is one crucial step left which is to remove permissions inheritable:
    a. Repeat step 3 to learn to re - open properties and get to "Advanced security settings"
    b. go to the permissions on the top tab
    c. click on the button "Change permissions" which is down
    d. at the bottom, there should be 2 check boxes:
    -' Include the permissions that can be inherited from the parent to this object': deselect this. When you do so, you will get a warning on the parameters of parent is not not able to spread. Select 'Add '.
    -' Replace all permissions of child object with permissions inheritable this object': check this
    e. press OK to confirm. Windows will warn you this time; Click OK
    f. reconfirm by pressing OK; now, you should get to properties again

    Now, you shouldn't have all the warnings about the SYSTEM do give you permission as he attempted to perform actions on this issue.
    All the boxes to change the permissions on the accounts (properties > Security > Edit) must now be enabled, and you can tinker around with it.

  • Elements 7 continually said "you need to restart" whenever I try to open the full Editor. SUP with that?

    Elements 7 continually said "you need to restart" whenever I try to open the full Editor. SUP with that?

    The editor preferences often get corrupted. You may need to restore the preferences of the Publisher to resolve all conflicts.

    Press the Ctrl + Shift + Alt keys and simultaneously click the button Edit in the Welcome screen. The three keys to unlock and look behind the screen of welcome to close. Or press the keys while double clicking on PhotoshopElementsEditor.exe

    You should see a pop up box with the words: settings of items file remove Adobe Photoshop?

    Click Yes

    Close items and reopen it in the normal way - then wait while it rebuilt preferences.

  • After updating Vista, no display on startup. You need to restart each time you start.

    Hello

    My pc worked fine months ago, but after an update to Vista, all of a sudden it started not to display what whether at start-up.

    Monitor work, Vista loads, because I can hear the opening melody of the speakers.

    But there is no display, I have a black screen. LCD monitor remains in stand by mode.

    To solve the problem, I need to restart the computer and go to guarantee the mode every time...

    After pressing the restart button, the monitor opens normally, I choose the secure mode, if I did not have Vista isn't black, again leaving the screen.

    After choosing safe mode, drivers and loading files and when I see the screen of the user, I restart Vista.

    That everything becomes normal... Vista starts normally.

    I've updated my ATI driver but nothing has changed.

    How can I resolve this display problem? To open my pc and be able to see my office properly, I need to restart twice each time you start...

    Try this:

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Understand the Extras in Windows Vista and Windows Update info is at the link above.

     

    Remove the Vista updates; two ways to do this:

    1. a System Restore to before the updates:

    Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

    If you use Norton, disable it before using the system restore.

    If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

    Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

    System restore steps according to the info above.

    Also:

    2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

    > then click the one that you don't want > uninstall will appear at the top > uninstall it.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

    > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

    When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

    > or if you do not need an individual > right-click on > UAC prompt > hide it

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    And for Windows Update issues:

    It's updated operating system Vista, upgraded installation and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Unable to delete files and folders... 'You need permission system to make changes to this file.

    I am the administrator of the account. I can't remove the residue of some programs because of this message. As usual made all the bits to find the answer on the forum of Microsoft and other sites. None of them helped me so far. I also tried the modified permissions and changed a key .reg property. But nothing happened.

    It is dangerous to change the permissions of system, programs and registry locations.  These are tight to protect against malware that exploit the administrative accounts and compromise the entire system.

    The "residue" would be solve by using the uninstall utility program.

    That said, if you do not need to manually delete a folder, just be vary close.  For example, appropriating and remove a specific program of record, not all of the "Program files".  Basically, do not apply a new authorization to all the program files just to remove one file of boredom.  If you keep in mind, you open any hole by making changes to the authorization.

  • Our AppleTV alcoholic, if we opt for a movie / TV that was bought, we get the notice that it is "impossible to load the content. You need to restart completely to access the content you've purchased.

    We have the AppleTV (4th Gen, 64 GB). Whenever we 'wake up' the AppleTV from sleep, we are unable to access all our content purchased until we start the system. We have never had this problem until a few weeks ago. All software is up-to-date and automatically update, internet is very good, and nothing has changed since we have implemented the AppleTV. Frustrating to not be able to access the content that we have already purchased without jumping through hoops.

    Hello

    I met this time. All I did was to completely close the application TV Shows and reopened. It worked after that without needing a reboot.

  • OfficeJet Pro 8600 n911g stops and you need to restart the spooler on Win Xp

    Hello

    I have an OfficeJet Pro 8600 N911g printer.  It is networked and I put the static IP address on the printer.

    I have a user with about once a day to restart the Windows print spooler service so that tasks start printing.  I loaded, uninstalled and reloaded the Windows XP drivers.

    Any thoughts on how to solve this problem?

    Hello

    Have you used the latest version of the software on the HP site?

    If not, uninstall the printer from programs > HP > printer folder and then install the latest version below:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=228&product=4323648&sw_lang=

    I suspect also any security program which may block the network connection (assuming that by the description of problem on a single user), temporary disable any software firewall running and check if that can cause printing to stay in spool it print.

    Try to run the HP print and Scan doctor, click on network > firewall help and make sure any firewall running is disabled, then follow Fiox print and check what is happening:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109037-2&cc=us&DLC=en&LC=en&OS=228&product=4323648&sw_lang=

    If still the same I guess rather the envoirnment of the OS, you can try running Microsoft Fixit to diagnose service print spooler for questions and automatically check if this can help:

    http://support.Microsoft.com/mats/printing_problems/

    Shlomi

  • Restart the unit VDR - do you need to restart vCenter also?

    When I restart the camera VDR, must I also reboot vCenter, and if yes, what is the best order to restart.   Camera VDR can vCenter, or vCenter then camera VDR?

    Thank you.

    I look forward to the day, we have not suddenly start VDR several times / week.

    If you restart VDR, this will not affect vCenter.  There is a plug-in that manages the device, but will not be affected vCenter.

    If however you restart your vCenter you MUST restart ALL your VDR devices (at least in my experience and other people have noticed the same thing) whenever the vCenter is restarted.  For some reason any VDR devices lose their session, and you will not be able to make backups for the VDR until they have restarted AFTER a restart of vCenter.

  • XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

    XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

    Hello

    Let us perform the steps below and check out them.

    a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
    b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
    c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
    d. restart your computer.
    e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

    My computer stops the update via WIndows Update Component

    Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

    My computer has a few updates, but can not run these update

    Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

    He starts to run updates 1 of 13... and stops

    If I shutdown normal e, computer stay likehanging 1 hour without stopping.

    I would like to know how to solve this problem

    Thank you

    Concerning

    Gladmar.

    Hello

    Were there any changes made on the computer before the show?

    Perform the following methods and check:

    Method 1:

    I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

    a. click Start, type services.msc and press enter.
    b. search Windows Update.
    c. right-click on the service and select Properties.
    d. in type of startup, select enable.
    e. click Start under the Service status.
    f. click OK.
    g. Repeat steps c to f for the following services:

    Background Intelligent Transfer Service
    Cryptographic services

    If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

    Method 2:

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Method 3:

    Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 4:

    The problem with Microsoft Windows Update is not working

    http://support.Microsoft.com/mats/windows_update/

    See also:

    Troubleshoot problems with installing updates
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Updates: frequently asked questions


    http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

    I hope this helps.

  • Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

    Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

    I am currently using windows 32 bit vist

    I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

    Suggestions?

    Hello

    1. have you made changes on the computer before this problem?

    2. which antivirus app do you use?

    I suggest you try these methods and check.

    Method 1:

    Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

    Follow these steps:

    a. click the Start button, click computer.

    b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
    Where 'C' is the drive of operating system
    c. delete the log file, and then restart the computer and check the issue.

  • Can't get updates for Windows, "Windows Update cannot currently check for updates, because the service is not running." You may need. "" Restart your computer.

    When I try to install the updates I receive the message "Windows Update cannot currently check for updates, because the service is not running."  You may need. "" Restart your computer,   It does not also. check me the update history

    Hello

    1. you made any hardware or software changes the computer recently?

    2. What is the number of update?

    3. do you get this message for all the updates?

    Follow these methods and check if that helps:

    Method 1:

    Step 1.

    Unplug all external devices, restart the computer, and then try to install updates.

    Step 2:

    I suggest that you follow the steps mentioned and try to start the Windows update service.

    Check if the following services are running.

    (a) Background Intelligent Transfer Service

    (b) cryptographic Service

    (c) Windows Update

    (d) Windows Installer

    a. Click Start, type "services.msc" (without the quotes) and press ENTER.

    b. double-click the service name in the Services list.

    c. under the general tab, next to startup type, make sure that automatic is selected.

    d. If the service is not already running, under Service status, click Start and then click OK.

    e. once the services are started and defined as running, try to install the updates and check.

    Method 2.

    You can follow the steps in this article: http://support.microsoft.com/kb/2509997

    Warning check disk.

    Important: All by performing the check disk on the hard drive if bad sectors are found then check disk try to repair this area, all available data on this sector can be lost.

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    See also: the problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • How can we change the default zoom setting so that when you open a PDF the size of the displayed document zoom is that you need it to be?

    How can we change the default zoom setting so that when you open a PDF the size of the displayed document zoom is that you need it to be?

    Hi CKWAZTRANSINC,

    Open Acrobat Reader DC, navigate to the Edit-> Preferences-> Page Display menu-> set your required Zoom percentage.

    Click OK to confirm the change.

    Restart the Acrobat Reader DC to test.

    Let me know if it solves your problem.

    Kind regards
    Nicos

Maybe you are looking for

  • Model of gone gas mileage

    When I initially download numbers for the iPad a couple of years ago, there is a model to follow gasoline consumption. I used it often for travel. The model filled in the last mileage and makes other calculations for each entry. Several months ago I

  • Synchronization of the OS 10.5.8 with iOS 8.1.3

    Since OS 10.5.8 became time passend, sync iPad iOS 8.1.3 with my MacBook Pro is no longer possible via iTunes. I don't want to upgrade my MacBook Pro in order to avoid having to buy other programs again. is there a way to bypass? Thank you Walter.

  • When I stop I get message from windows, but cannot read it leaves the screen

    When I shutdown stops, she arrives with a message from windows, but leaves the screen before you can read it There is a place to CANCEL but you can't do anything, so he continues to stop.

  • A pop up window saying kdbsync.exe has stopped working... what should I do to solve the problem in yhis?

    I need step by step instructions on how to treat kdbsync.exe stop because I'm not very computer savvy.  What is a malware problem or a virus? I am running TrendMicro Titanium Maximum Security Anti Virus. Internet Explore also runs extremely if not at

  • No sound of any film of game...?

    Recorded some footage of game and try the elements for a video editor (on the atmosphere of the trial, if I can use it I'll probably buy it). When I took vid in the elements were not sound... not even anything in the audio story board. The sound is t