You try to run the system restore and get this error__unexpected error filename directory or volume label syntax incorrect (0x8007007B) __What can do?

Similar Questions

• When you try to run a system recovery I get this error: cannot start Windows. A recent hardware or software change might be the cause. OxcOOOOOOf

  When you try to run a system recovery I get this error; OxcOOOOOOf

  Original title: error OxcOOOOOOf

  My laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: OxcOOOOOOf

  Info: Seelected entry could not be loaded because the application is missing or damaged.

  It does not work. Suggestions and no, I have not modified before the crash.

  I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?

  Hi Anthony206,

  Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).

  From now on, you can only contact OEM for the use of the recovery feature.

  I hope this helps.

• When I try to use the system restore I get an unspecified error response

  Original title: 'all programs, accessories, SYSTEM RESTORATION tools'

  Recently, when I try to use system restore, I get an unspecified error response he has worked in the past. How can I fix it?

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Receive the OXC0000022 error when you try to run the system restore

  Original title: OXC0000022 ERROR

  My problem started when I went to the site of JIGZONE Jigsaw, the picture window that shows the parts was not correct!  I thought I might have a virus so I ran avast, SuperAntiSpyware, and has not helped.  So I did the scan SCF/scannow and it did not show anything wrong.  Then I tried to do a system restore to an earlier date, that's when I got the error message and it has not restored, I changed to another date and no luck.   I went safe mode and tried to do the restore, no luck!  Help, please!

  My calculation uses Windows 7 Home Premium,

  Thank you!

  Carrman Daddy 2

  Hi Carrman,

  Sorry to hear that uninstall tool did not help uninstall you spybot and thank you for your update.

  It seems that when we try to uninstall the software, the software looks file uninstall.exe which might have been moved or deleted.

  I suggest you post this question on the forum of Spybot.

  http://forums.Spybot.info/forum.php?s=62ab5cf724e2426acbd901d146640e2c

  For your information: http://www.safer-networking.org/FAQ/How-to-uninstall-2/

  I hope this helps to solve the problem, email us for assistance.

• When you try to run the system on gateway mx6453 recovery, recovery begins a box opens indicating the system restore is incomplete, please insert the cd or dvd

  try to run the system on gateway mx6453 recovery, opens the recovery page, but then appears a box that says system restore is incomplete, please insert the cd or dvd.  the recovery partition seems to agree.

  Hello

  · Why are you running the system recovery?

  · Are you able to perform system restore on the computer?

  I suggest contacting the manufacturer of the computer, the link you can check: http://support.gateway.com/support/default.aspx?cmpid=topnav_support

  For reference: Troubleshooting for problems when you try to use the System Restore tool in Windows XP: http://support.microsoft.com/kb/302796

• Try to install the patch KB943729 and get this error. __

  Try to install the patch KB943729 and get this error.

  The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.

  Any help with this error.

  I've always found the icon on my Start button that indicates that an update is ready to be loaded and I have to restart my computer

  Open Internet Explore (only) to http://support.microsoft.com/kb/971058 & re-run the difficulty in AGGRESSIVE mode. [1]

  Reboot once more & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• You try to run the system on my desktop restore encounters a problem with the program looping.

  Original title: System Restore loops

  Hi, I am trying to run restoring the system on my desk is a problem with the program in a loop.  He directs the system restore and then comes back just to start the system again Restore page.  How to solve this?  I started having problems when I have updated the BIOS on my motherboard.  When I installed the motherboard at the start, I think I used the incorrect installation disc (my son has same brand motherboard but the sound is more advanced).

  Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture or
  contact PC manufacturing (see support links below) and order the recovery media.

  Note: Activation is not required when you use the recovery partition or recovery media, but you will need to reinstall all your applications.

  Also to save your documents on external support (if possible) before starting the recovery process.

  Once completed, your PC will be actually in the State when you first purchased it and turned on for the 1st time.

  To access the recovery Partition, start your computer, and then by pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the list below or your user manual for your brand and model.

  If your hard drive has failed, do not have a recovery partition or the recovery partition is not accessible,
  Then, you must contact the manufacturer support team and ask for a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Acer: Press and hold ALT + F10, as soon as you see the logo
  http://Acer.custhelp.com/app/answers/detail/A_ID/2631
  Acer support: http://www.acer.com/worldwide/support/
  Acer recovery support: http://store.acer.com/store/aceramer/en_US/eRecovery

  Advent: restart your computer, then the immediate start by pressing the [F8] key or the F10 key.
  The fastest way to restore your computer is to use the hard disk recovery tools. You can access them by restarting your computer and then pressing the [F8] key or the F10 key until the Advanced Boot Menu appears. Use the arrows to select "Repair your computer", then press [Enter]. Read all of the instructions on the website of advent and made your choice as to the action you want to perform: http://www.adventcomputers.co.uk/restore-or-reinstall-windows-your-computer
  Support: http://www.adventcomputers.co.uk/product-support/support-services

  ASUS: Press or press the F9 key as soon as you see the Asus logo.
  http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&m=X53E&OS=&no=1775
  ASUS support: http://support.asus.com/contactus.aspx?SLanguage=en

  Dell: Press F8 directly after switching on / to start the computer
  Recovering detail instructions:
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
  Dell support: http://www.dell.com/support/home/us/en/19?c=&l=&s=
  Or: http://www.dell.com/

  EMachines: hold the Alt key and hold press and release the key F10
  http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html
  Support: http://www.emachines.com/ec/en/US/content/support

  Fujitsu: Press F8 several times directly after switching on
  https://answers.Yahoo.com/question/index?QID=20110406074143AAcx1Zw
  Support: http://www.fujitsu.com/global/support/

  Gateway:
  http://www.ehow.com/how_6297937_restore-gateway-laptop-factory-settings.html
  https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml
  Support: http://www.gateway.com/worldwide/support/

  HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
  HP Mini: Press F11 directly after switching on / to start the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418
  Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Lenovo uses the F11 key to launch the restore process:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4UFUYK
  Directions for Lenovo OneKey Recovery, hidden partition and recovery DVDs:
  https://support.Lenovo.com/us/en/documents/ht077384
  and: http://support.lenovo.com/en_US/detail.page?DocID=HT077144
  Support: http://support.lenovo.com/en/supportphonelist

  How to run Lenovo Onekey Recovery
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
  Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211

  You can also find parts of this article from Lenovo worth reading:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4VFUDU

  LG: Press F11 directly after switching on / to start the computer
  Support: http://www.lg.com/

  Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
  After the system recovery program has loaded follow the instructions to reinstall the operating system.
  Support: http://www.packardbell.com/index.html

  Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.
  Support: http://www.samsung.com/

  Sony VAIO Windows 7: restart and press "F10".
  https://CA.en.KB.Sony.com/app/answers/detail/A_ID/35585/p/48903, 49902,71663,71664/c/65,67/kw/recovery%20using%20f10
  Sony VAIO Vista: Restart and press "F8" repeatedly until the screen "Advanced Boot Options".
  https://us.en.kb.sony.com/app/answers/detail/a_id/41931/~/how-to-perform-a-system-recovery-using-the-vaio-recovery-center.
  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41949/session/L2F2LzEvdGltZS8xNDA4MjI2NTAzL3NpZC8qWVBPbCpfbA%3D%3D
  Support: http://www.sony.net/SonyInfo/Support/

  Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
  and at the same time, press the button power once to turn on your laptop.
  When the Toshiba screen appears; release the 0 key.
  References: http://www.mytoshiba.com.au/support/items/faq/71
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643
  Support: http://www.toshiba.co.jp/worldwide/

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• Error when you try to use the system restore: 0x8004230f

  whenever I try to open system restore, I get the error code 0 x 8004230f, I did the SCF scan to see the number of files that could not be fixed what should I do now?

  I installed Norton utilities 2011 & Norton anti virus

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• A run the system restore, and now my Adobe Acrobat license has exceeded its limit

  I tried to restore computer because of a corrupted installation and it deleted Adobe Acrobat, since the system restore did not work, I have reinstalled the operating system, corrected and then installed Adobe Acrobat Professional of XI, entered my license and it comes up with amounts excesses of this license. I would just get the license reactivated. Any help would be appreciated. I tried to call and Adobe is closed on weekends, cat I tried but nobody came online in some time so now, try the forums as they are 24/7.

  Thank you-

  Jake

  You need to talk to Adobe, not users on the forums, because only Adobe can reactivate something on their end.   I guess the numbers increase during the work week.

• When I try to use the system restore I get is an empty box where the restore points should be restore which stops me using the restore of the system how can I get the restoration back bridges

  I tried to use my system restore, but when I go into it all dates are missing from the box and I can't use the system I tried many different things, but nothing is done, everyone has ideas

  If your system restore page display only the title bar 'System Restore', or your accounts settings page of users shows that the 'User accounts' title bar and the screen where information needs to be is an empty white box...

  System Restore is a frequent target of attacks by malicious software.  If SR was working before and is now afflicted, run some scans and then fix any problems.

  Remember that the system restore is not a time machine.

  Your system is currently or has been reached by malicious software.

  You can now fix the symptom and scanning for malware later, or you can now find malware and fix the remains later.  I recommend just fixing the symptom of the empty page and forget to do the scans.  The symptom of the problem of fixing and fixing the problem are two different things.

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

  Just fix the immediate question:

  Looks like your file jscript.dll became somehow not registered so you can re-record it.

  There are probably a few other things that do not work you know yet, so fix them all at once.

  Re-registration of these DLLs is correct, even if they do not need renewal.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time.

  regsvr32 jscript.dll
  regsvr32 vbscript .dll
  regsvr32 /i mshtml.dll (it's a look of slash)

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  Now check your timetable for restoration of the system and/or the user account settings page.

• When you try to run the SFC/scannow I get the following message: Windows Resource Protection could not perform a requested operation.

  When you try to run Fsc/scannow I get the following message: Windows Resource Protection could not perform a requested operation. Can anyone help?

  Original title: problems with Windows Live Update

  You run it from a (run as administrator) command prompt?

  SC Tom

• You try to run the scan mode and mode interface fpga at the same time is causing errors

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:
  
  Open FPGA interface reference.
  Reserved outside LabVIEW FPGA:  turns The RIO Scan Interface.  You must set the mode Interface FPGA chassis in order to unlock the FPGA. »
  

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

  rex1030 wrote:

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  This should not be the case.  9211 data will not update with each sweep, but you should be able to run the scan faster than 15 Hz without problem.  Do you have specific issues with this?

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  You can try making sure that the chassis is set to mode Interface FPGA and the setting is deployed.  I wrote that article that you referenced says will select the deploy option later and not explicitly speak to deploy the chassis later.  Run a VI with a reference open FPGA vi not automatically deploy chassis settings if you need to do it explicitly.  Try the following steps.

  1. right click on the frame element and select Properties.  Make sure that the Interface FPGA option button is selected. \

  2. right click on the frame element and select deploy.

  3. repeat your VI.

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141

  
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:

  Open FPGA interface reference.
  Reserved for LabVIEW FPGA outside: The RIO Scan Interface is running. You must set the mode Interface FPGA chassis in order to unlock the FPGA. »

  The likely cause of this error is that the setting of the FPGA Interface on the chassis has not been deployed.  If the chassis is still Mode Scan fixed personality bitfile will be loaded on startup and the FPGA will be locked.

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  I'm sorry that you have had difficulties.  Assuming that I'm wrong about the source of your problem, it seems we have to update less than Ko to include the deployment step.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

• Error message in another language when you try to run the perfect world and Forsaken World

  Hello everyone I have a problem that I've been up to this unable to solve, and I hope someone here can...
  in the last month or more I tried to run the following games perfect world and abandoned managed both by entertainment world perfect but continue to receive the error message, http://i187.photobucket.com/albums/x7/steven2601/fw.jpg

  and seems to be able to resolve the question pls help

  the game is the English version, but apparently it was based on the Chinese version, when they converted or something I don't know about this in any case I installed all the Japanese and Korean language Chinese packs and the message is always out the same... However, I took a radical and simply implemented measure to upgrade to windows 7 now here's the funny thing I didn't redownload the game then I copied the installed folder of vista on my new installation of windows 7 and he ran right away I would have thought with it being installed on 1 OS, then copied to another , one that would give an error message... anyway problem solved but thnx for answer and enjoy my little story :)

• When you try to perform a system restore, I get an error saying: "an unspecified error occurred during system restore." (0 x 80070002)

  original title: System Restore problems

  Hi, I have problems, perform a system restore using windows 7. I get the message: "an unknown error occurred during system restore. (0 x 80070002). any help with this problem would be appreciated. Thank you very much.

  Hello

  This applies to vista, but use it for windows 7

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and issues of windows 7

  Here is the vista forums

  Try the repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• When you try to perform a factory restore I get this error: "could not find"JScript.Encode"script engine: C:\Windows\Help\OEM\scripts\launche.jse.

  I'm trying to restore my PC to the preassembled initial state

  I followed this as mentioned in the help, but I got this message

  Cannot find "JScript.Encode" script engine

  C:\Windows\Help\OEM\scripts \launche. JSE

  
  

  I use windows Vista

  
  

  So what can I do to restore my system?

  waiting for your support with kindness

  Hello

  There are two ways to do this.

  Most computers these days don't come with recovery discs.

  Instead, computer image makers a recovery Partition on the hard drive in order to reinstall the operating system to.

  That the recovery process says return to factory (new State) settings

  To access the recovery partition, you should be able to find it in the start menu > programs > list of software from the manufacturer of your > search for recovery options.

  A simpler method to start the press a key or sequence of keys at startup (when you start your computer)

  So maybe F10, F11, Alt + F10, etc. depending on your manufacturer.

  You must ask them or online on their website or the Support Forums to know the exact key / s press.

  Another method is to ask them to send you a set of recovery discs, which will do the same.

  They will charge a small cost for this service.

  Back up the data that it will be lost during the recovery process, and all programs that you have installed will need to be reinstalled from the original media (CD, DVD, download Net).

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.