you try to view 2 swf files in an html page

Similar Questions

• IE 8 - you try to view a PDF file in Acrobat Reader external aid

  Running the version 4.6.2 - 467908 and TA'd IE 8 on a clean XP SP3 with FLash and Schockwave (pretty basic) and it works fine. However, when I try to view a PDF file (I have Acrobat Reader X installed) I get a gray screen, acrord32.exe runs in memory and eventually I get a message from reader, which indicates that there was a problem with the drive and I need to go out and try and again.  In the native browser (ie6), it works fine.

  I made sure the Cache Internet % shall be merged and other messages, I put ChildProcessEnvironmentDefault = external.

  Any thoughts? I've seen other posts where it works and I don't want to capture reader with IE.

  Thank you.

  Theoretically, the construction can be performed anywhere that ThinApp is installed.  All our versions are running on a Windows 2008 Server, but the captures are made on XP, Vista and 7.

  Regarding the list of parameters, I mentioned, there are two approaches: all, with exceptions, internalize or outsource everything.  In the example you provide, you have chosen to outsource everything.  In the syntax that I provided, the default is to stay in-house, but with exceptions.  This syntax works in our environment, but the configuration of your system may be different.  I went this route because I knew I'd need PDF look at one at work, and I didn't disable the Safe_mode in Acrobat.

• A mistake at the opening of this document when you try to view the .acsm file, books ePUB, eBooks

  Original title: cannot display files .acsm, books, ePUB, eBooks

  Using Win7 - cannot see/read any version of an e-book.  I have Adobe Digital Edition such as suggested by PL from San Francisco, also Overdrive.  Ebooks download Adobe Reader X in one. File type of SOCIAL mobilization.   I tells me there is an error at the opening of this document and the file is not found.  For this reason, Adobe Digital Edition and if Overdrive Media has anything with it, cannot be used. What I am doing wrong?

  In fact, it's really easy.  If you try to open a. Extension of EPUB file from your computer and you have Windows 7 or above MICROSOFT came up with a program called NOOK bundled in Win 7 or more. Just look for the NOOK icon on your desktop or in your programs and open drag and drop your file epub (book) what that is, and it will convert it for use on your computer. If your use of a device to try to open it as a google chromebook, ipad or eReader etc you need to open a bit the same way. You must use a program like the sony READER which you can dwnld for PC & Mac, android, tablet, iphone & ipad. Or you can use barnes & noble, amazon, the list is long... and Yes, there is a reader of Microsoft and you can dwnld free. If you can't dwnld this directly from you tablet or phone, you may need to connect to a comp and w / USB connect the transfer to them. And in fact all of these programs, I've mentioned should all have apps if you want no problem w / Mac or PC...

• Premiere Pro cs6 - video pane of the workspace remains empty when you try to view the imported files

  Hello

  I am currently working in Adobe Premiere Pro CS6. When I import my media into my workspace and drag it into the timeline, the preview area where you can review your cup video remains black. Double-click the imported file gives the same result. I was initially import files .jpg (about 300 KB of size for each) so I tried to import various other image formats - .png, .tiff, etc... I even imported a my scene movie file to determine if the problem was with my format of content. With video, the audio plays fine, but the video remains empty in the preview area. I tried rendering my workspace and change my initial parameters of the project, but to no avail. I went to my preferences for first and far as I know, everything seems fine.

  I use the software on a HP Pavilion, Windows 7 intel core i7, 8 GB of ram with a 2 GB of 650 M from nvidia card. Any help would be greatly appreciated. Thank you!

  Hello

  Have you tried to change your Video Renderer? It would be under the project > project settings > general. Switch option only the Mercury playback engine software and see if it helps.

  Thank you

  Regalo

• Difficulties to display recorded XP of Windows Movie Maker movie file. You try to view saved WMV format results in arrested image creation, but the music continues.

  Problem with Windows XP Movie Maker. You try to view saved WMV format results in arrested image creation, but the music continues. Tried to re-record and solve the problem, no luck. Can properly view in Movie Maker as a project, but not the final version in WMV format.

  More details: I saved my Windows XP Movie Maker project in WMV format. I taped 3 ways: at my computer on a flash drive and a CD - r. Everything seemed fine until I try to see the movie. The video freezes on a different image in each of the places I recorded it, but the music continues & it's in the same place every time depending on what I am posting with (the computer it freezes on a certain task, the flash on another, the cd on another), tried re-register but it always does the same thing... gel on a photo but the music continues. Help! I can't find a solution anywhere. PS Please answer me "simply", as I'm not too computer savvy.

  Problem with Windows XP Movie Maker. You try to view saved WMV format results in arrested image creation, but the music continues. Tried to re-record and solve the problem, no luck. Can properly view in Movie Maker as a project, but not the final version in WMV format.

  More details: I saved my Windows XP Movie Maker project in WMV format. I taped 3 ways: at my computer on a flash drive and a CD - r. Everything seemed fine until I try to see the movie. The video freezes on a different image in each of the places I recorded it, but the music continues & it's in the same place every time depending on what I am posting with (the computer it freezes on a certain task, the flash on another, the cd on another), tried re-register but it always does the same thing... gel on a photo but the music continues. Help! I can't find a solution anywhere. PS Please answer me "simply", as I'm not too computer savvy.

  ===================================
  Some experiments to try.

  (1) create a small project with just a few pictures and see if it will play.

  (2) use .bmp photos to create the project instead of .jpg photos.

  (3) remove all transitions and resave the project as .wmv and see it it helps.

  (4) If your music .mp3 file... try to use .wma or .wav. John Inzer - MS - MVP - digital media experience

• Silverlight error 4001 while you try to view a missed TVoutage

  Original title: Silverlight error 4001 poster, sorry, something went wrong. Film will not start playing (advertising goes well!)

  Just like steated above, since a update (don't know if it was the 5.0 er the 5.1 update) I received the above message when you try to view a missed TVoutage (it worked well until September)

  Hello

  (1) you are able to correctly read the other videos?
  (2) remember to make changes to the computer before the show?
  (3) you are trying to play the video online?

  (4) what version of the Windows operating system is installed on the computer?

  You can try the following methods and check if it helps.

  a. close all open web browsers.
  b. uninstall Microsoft Sliverlight by going to control panel > uninstall a program > Microsoft Silverlight > Uninstall.
  c. go to C:\Users\username\AppData\LocalLow\Microsoft and delete the Silverlight folder.
  Note: If you do not see the AppData folder, you may need to show hidden files.
  d. If it does not, follow the steps mentioned in the article , http://support.microsoft.com/kb/2608523

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/
  e. reinstall Silverlight.

  Open the links below and check if you are able to watch videos of test
  http://www.Microsoft.com/Silverlight/IIS-smooth-streaming/demo/#/multi-cam
  http://www.Microsoft.com/Silverlight/IIS-smooth-streaming/demo/#/live

  For additional assistance, please contact forums Silverlight.
  Here is the link: http://forums.silverlight.net/

• You try to view pictures opens Internet Explorer instead

  Original title: look at a photo without Internet Explorer used.

  How can I open my "My pictures" folder and view the photos without Internet Explorer 9, misuse of the program.  I don't want to use IE9 to open my photos.

  Hi TFink22,
   
  -Have you done recent changes made to your computer before this problem started to happen?
  -This issue produced while you try to view the images stored on your computer in one different location other that folder of photos as well?
   
  It might be possible that the file association for the images on your computer has been corrupted.
   
  Change the type of program to open the images on your computer to fix this.
  Here is an article that will help you do the same thing:
  Change the program that opens a type of file

• Blue screen error when you try to print Adobe PDF files

  Original title: the computer crashes when I try to print Adobe PDF files.

  I unintalled and reinstalled remains 9.3.3 and it still won't print. The OS crashes when you try to print a .pdf file. I can open the document and view the file but not print, just the blue screen and restarts. I opened a word document, print and print text files. It will print anything but Adobe files. Is there any help out there?

  HonoriusIII

  Thank you for your support and help Sicard. I finally got to the last version of Adobe as the culprit. It seems that the latest version 9.3.3 was causing problems. I uninstalled the software, cleaned the registry and other remains and installed the various editions of Adobe. Seems that Vista likes only one software version which proved Adobe 8.0. Once I installed the software, found a few .pdf documents and tried to print. Not only did it print well, it was very fast. Of all the places to find the 8.0 Adobe has been installed on my recovery disks. I don't think Microsoft product (s) are the root cause. Something in Adobe was the cause of the crash. I have the error message has not write against accidents, but it dumped memory and restart is fine, no conflict of driver. Only thing I did after each accident was to defragment. the hard drive and RAM by using certain tools. Vista ran fine since. I know a lot of people out there do not like Vista, but I did have a lot of problems with the software. I found problems with other types of competing software and work with software developers using their products in beta. The crash of the problems were not these beta products. I believe in keeping software simple and effective, it seems that Adobe will conversely making it too complicated software and an application's entire concept.

  Thanks for you help,

  HonoriusIII

• Error when you try to view the application latencies

  I'm not able to get see Planner to latencies report application series of tests with multiple virtual machines in them. If I run a test that has 3-2 VMs in it while I'm able to view the results of the trial very well, however when I try to run tests with more of that I get errors when I try to view the results. When I try to load the web page results to see Planner, nothing happens, and I get the following error in viewplanner.log:

  2012-10-24 20:16:13, 025 INFO {}
  Unhandled error
  Traceback (most recent call changed):
  File "/ usr/lib/python2.6/site-packages/twisted/web/http.py", line 773, requestReceived
  Self.Process)
  File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 127, process
  Self.Render (resrc)
  File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 147, in rendering
  body = resrc.render (self)
  File "/ usr/lib/python2.6/site-packages/txjsonrpc/web/jsonrpc.py", line 112, rendering
  () defer.maybeDeferred(function,_*args).addErrback
  -< exception that is caught here >-
  File "/ usr/lib/python2.6/site-packages/twisted/internet/defer.py", line 133, in maybeDeferred
  result = f (* args, * kw)
  File "/ tmp/ViewPlanner/web_interface.py", line 527, jsonrpc_getResultsMap
  File "/ tmp/ViewPlanner/mysql_interface.py", line 571, in getTestAverages
  exceptions. KeyError: 0

  When I try to manually execute the python script statement, it tells me that there is no result for the test.

  I just ran a test locally with 276 VMs, according to viewplanner.log, all 276 VMs transferred their results to the device. Yet I still get this error when you try to view the results.

  I tried to create new images GoldenDesktop and GoldenClient, as well as deployed a new device see Planner and reinstalled all of its agent programs, nothing helps. Anyone know what could be the cause?

  We have seen this issue for large series and I attach a patch file that you can overwrite the/root/ViewPlanner harness directory and then restart the vdiappd service, and then you can give it a try.

  For manual results extratcion by using the report.pyc script, you must use '-j' I ' and '-j' operations if you ran just 1 iteration of the workload.

• I get "an error occurred, please try again later" when you try to view videos youtube on Firefox, but no problems on Chrome

  I get the error: "year error has occurred, please try again later" when you try to view videos youtube on Firefox.
  I tried to use Google Chrome and everything's good about it.

  Things I've tried:

  • Clearing cookies, history etc.
  • Removal of cookies.sqlite
  • Re-installed a new Firefox
  • Re-installed Flash Player 14
  • Get rid of Flash Player 14 and returned to Flash Player 11

  None of this has worked.

  I get the error for all videos to youtube every time, it is not a random phenomenon.

  I'm really frustrated by it because Firefox is my favorite browser and now I am forced to switch to Chrome.

  If you live in India then see:

  • http://www.medianama.com/2014/07/223-World-Cup-2014-472-websites-including-Google-Docs-blocked-in-India-following-Sony-complaint/
  • http://www.nextbigwhat.com/Delhi-High-Court-orders-block-Google-Docs-several-websites-297/
  • http://delhihighcourt.NIC.in/dhcqrydisp_o.asp?PN=119642 & YR = 2014

• You try to view a movie and it says to install Silverlake, but she is already there.

  You try to view a movie and it says to install Silverlake, but she is already there. I tried to remove it, but continue to get the same message...

  Do you mean Silverlight?
  If so, look here for an explanation:
  https://en.Wikipedia.org/wiki/Microsoft_Silverlight

• When you try to install fix - it files, diagnostic and cleaning Center. I get a message that it is in the wrong format

  original title: format of the troubleshooting tool

  When you try to install fix - it files, diagnostic and cleaning Center. I get a message that it is in the wrong format. How can I fix it so I can clean or remove the unwanted [for example registry files]?

  Hi RandyHunter,

  1. what you trying to accomplish?

  2. What is the question you are facing on the computer?

  3. you try to install Microsoft fixit tool?

  4. did you of recent changes on the computer?

  If you try to install Microsoft fixit tool then I would suggest that you post your query in the Sub forum mentioned.

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

• When you try to open an AVI file in Windows Media Player, the audio plays, but no picture.

  When you try to open an AVI file in Windows Media Player, the audio plays, but no picture. What is the problem and how can I solve this problem?

  Your computer can correct the code for AVI video. Download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code.

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• I recently got 'Class not registered' when you try to open my PDF files. This didn't happen before the last 2 days

  I recently got 'Class not registered' when you try to open my PDF files. This didn't happen before the last 2 days

  Hi Meenakshi,

  Thanks for getting back to me. The problem is solved now. We had to reinstall Acrobat DC who, for some reason, had disappeared.

  Regards, Randy