You use the cellular data (3G) a lot about your xoom? Could miss you if you don't have 3G?

Similar Questions

• After the update to Vista, a lot of my services run no more. I don't have a stupid network

  After Auto Windows vista update last night (10/10/2012), my network and audio do not work. I also disvovered that many services are stopped and cannot be started manually. I tried to do a system restore just before the update, and the problem is still there.

  The system starts every time, but the services originate as STOPPED and there is no internet, or audio connection. I can't even copy stuff from the hard drive, because whenever I click on a folder in the system takes a lot of time to react.

  In safe mode, I can copy the files very well and the player is sensitive. At the moment I'm not suspect a hardware problem.

  Maybe this related to the update of Windows or a Virius?

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back before being installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Blank apps and icons for the use of cellular data

  Under settings > cellular, "Cellular data for usage" list, the first two rows are for some unknown applications, lack of title and icons. I guess they are vestiges of the apps that I deleted, but I fear that they are malicious software or a another bug. I tried to reset my phone and made sure it was sync properly with my apps on my mac, but these missing apps are still there (see photo). Any suggestion on what these empty applications can be, and if I should disable cell phone use just in case? Thank you.

  

  It is not malware. I think that your proposal about it being the remains of the applications that you may have deleted would be closer to what past. I saw the same thing on all of my iOS devices. This icon is the 'framework' all the app icons based on. In other words, if you stripped the face from the application icon, you will see which frame.

  It won't do harm to turn off cellular data for these applications. It could even lead to a discovery about what applications they are, if you try to use with cellular data off the coast and they don't work. I just think they are icons that are not displayed correctly.

• What value for p_print_server when you use the Rest Data Services as a print server?

  Hello

  I have my report server on the internal workspace defined as BI Publisher URL as default... It works for my BI Publisher reports.

  I have 2 reports who need to use the rest Data Services FOP engine and use GET_PRINT_DOCUMENT function Signature 4

  https://docs.Oracle.com/CD/E59726_01/doc.50/e39149/apex_util.htm#AEAPI146

  For these 2 reports, I need to pass a parameter to p_print_server. The documentation describes this as the URL for the print server

  My question is, how to find the URL for p_print_server when I want to use the rest Data Services FOP on ADR?

  I can not put as NULL as at the time, it will use the default BI Publisher URL and then these 2 reports will not work

  Moreover, when I put the server reports on internal workspace as 'Rest Data Services', my two reports work fine, but not when I put is as URL BI Publisher - which is necessary

  Help, please

  Concerning

  Matt

  Hi Matt Mulvaney,

  Matt Mulvaney says:

  I already have the correct configuration to be able to produce reports FOP including two steps you mentioned. This set works very well when I put the "Print server" preference in the settings of APEX Data Services Instance remains - and reports can be produced. But as I said, this must be set to a URL of BI Publisher.

  If you use "Print server" as "Oracle BI Publisher" then the p_print_server parameter would have been:

  http://myserver.mydomain.com:8888/xmlpserver/convert

  Where:

  • Printing of the address of the host server: myserver.mydomain.com (you can also use the IP address)
  • Print Server Port: 8888 (depending on what your BI Publisher Server uses port)
  • Print server script: / xmlpserver/convert

  Similarly, if you choose "Print server" as 'Oracle REST Data Services', the instance settings don't ask questions on the print settings, but internally it uses the following parameters and the p_print_server parameter is:

  http://myserver.mydomain.com:8080 / ADR / _ / fop2pdf

  Where:

  • Printing of the address of the host server: myserver.mydomain.com (host computer on which ADR is hosted)
  • Print Server Port: 8080 (the port used by what ADR/APEX Forum)
  • Script of the print server: / ords / _ / fop2pdf (this is not disclosed by APEX/ADR documentation, but as mentioned by Marc Sewtz in the following thread)

  Reference: Re: Apache FOP disappeared by Oracle APEX installable APEX 5.0 and 5.0.1 APEX

  Kind regards

  Kiran

• Impact on performance when you use the LONG data type

  Hi all
  
  
  Only I have a doubt about the use of LONG data type
  
  I use the data type LONG for some columns in a table and I created indexes on the columns separately, but these column values can be easily fit into the varchar data type.
  
  (Just to see the performance on this issue)
  
  Suppose that a common select query with WHERE condition on any of the column which has LONG data type will affect the performance of the query?
  
  Please explain.
  
  Thank you

  (1) the LONG (and LONG RAW) data types have been depricated for quite a while. Oracle has been strongly recommends that you move to 8.1.5 CLOB and BLOB data types. Why you use the LONG data type? You're still on Oracle 7?

  (2) have you tried to write a query that has a WHERE condition that refers to a LONG column? In general, you can not because it does not support the type of data LONG. For example

  SQL> ed
  Wrote file afiedt.buf
  
    1  create table a (
    2    col1 varchar2(30),
    3    col2 long
    4* )
  SQL> /
  
  Table created.
  
  SQL> select * from a where col2='abc';
  select * from a where col2='abc'
                        *
  ERROR at line 1:
  ORA-00997: illegal use of LONG datatype
  

  LONG data types are a royal pain to work with. They also have implications on the performance of wicked on the client.

  Justin

• How can I use only cellular data then a Wi - Fi network?

  I don't want to use the cell data only when the Wi - Fi connectivity is poor (for example turn on help Wi - Fi), I want to use cellular data 100% of the time. Why, you ask quite rightly? Because I have a data plan unlimited cell phone and I just want to play the channels of information and Netflix on my TV via AppleTV using AirPlay.

  AirPlay is only active when connected to a Wi - Fi network. I don't live anywhere near fixed services of any kind. I would watch my Netflix or other video services on my TV rather than on small screen of my phone.

  Are there any combination of parameters that will allow me to achieve this goal?

  Are there any combination of parameters that will allow me to achieve this goal?

  Sorry, but no.  The Apple and Apple TV routers require a wired Ethernet connection or a standard Wi - Fi connection.

  You can take a look at a router 3G / 4G... something like these for example:

  http://www.TP-link.com/en/products/list-4691.html

  Good idea to check to make sure that your provider supports supported router before you buy if.

• Good way to use the concurrent data store

  Hello

  I'm developing a multithreaded C++ application that uses the C++ of Berkeley DB Library.

  In my case, I have several databases that I composed in a wooded area. It is important for me to use an environment because I need control over the cachesize parameter.

  I don't need no guarantee of transaction and have for most of the readings, so I decided to use the "simultaneous database.

  I first pre-fill all databases with a number of entries (configuration single-threaded phase) and then work on it at the same time (for most readings, but also insertions and deletions).

  I tried all kinds of different configurations, but I can't work without specifying DB_THREAD as a flag of the environment.

  I don't want to because then access all handles is synchronized sequentially according to the documentation:

  "... Note that the activation of this indicator will serialize calls to DB using the handle between the threads. If

  simultaneous scaling is important for your application, we recommend handles separate for each thread opening

  (and do not specify this indicator), rather than share handles between threads. "

  (Berkeley DB QAnywhere C++)

  So I tried to open the environment with the following indicators:

  DB_CREATE | DB_PRIVATE | DB_INIT_MPOOL | DB_INIT_CDB

  All data in this environment handles are open only with the DB_CREATE flag.

  So, since my understanding this same basic access handles need to be synchronized, I opened separate handles foreach database for each thread (opening the handles is still single-threaded).

  In my first approach, I have only made use of the object of global environment. Which does not work and gives the following during operations error message:

  DB_LOCK-> lock_put: Lock is no longer valid

  So I thought, since the same handle global env is passed to all handles separate DB, it is perhaps a race condition critical on the handful of approx.

  So in my next test, I opened also handles separate EPS in each thread (and db handles owned each).

  That does not produce an error in db, but now it seems that each thread sees its own version of the databases (I call it stat early in the life of each thread and he sees all of the empty dbs).

  What is the right way to use the concurrent data store? Each thread should really open his own set of db handles? What about the number of open handles env?

  PS: Without specifying that the DB_PRIVATE flag seems to do the job, but for performance reasons, I want all operations to perform in the cache and do not specify product DB_PRIVATE average of several writes to the disk for my scenario.

  Thanks a lot for your help.

  CD (simultaneous database) allows a single editor with multiple drives, access to the db at a given point in time.    The handle for the writer doesn't have to be shared with readers.   If you share the DB handle then calls are synchronized, but if each thread has its own handle DB then this is not the case.     Since you have an environment, DB_THREAD must be at the level of the environment.   This will allow the sharing of the environment handle.     This type of error "DB_LOCK-> lock_put: Lock is no longer valid" you can provide us your code so we can take a look.   Also what BDB version are you using?

• Try to restore the data file, get error 'you don't have permission to save in this location"in Vista

  I am new to Windows Vista, but relatively competent in older versions. I installed the software on my new desktop computer. I am the only user on this computer and I have administrative rights. I installed the software in the Program Files directory. In the software, there is a folder for the working data file. I now try to 'restore' my data on this new computer file so that I can start working. I get an error message that says "you don't have permission to save in this location. Contact an administrator. "I have considered similar questions on this site and followed the advice to take possession of the file without success. I also created a new folder on the D drive, thinking maybe Vista I just wanted to keep C clean, but it gives me the same message. I can't save to the folder I created. Any advice?

  Program Files is a protected directory. If possible you create the working folder for the data in your user account instead. Is it possible in the options of the program the program in a directory of your user account? Or, if you think that any other user you may need to use this program, you could create the directory Public. MS - MVP - Elephant Boy computers - don't panic!

• Cannot use the bb data components

  Hello, I am a newbie. I recently moved from QtQuick to Cascades, now I'm trying to do some simple applications to start. I want to use DataSource {point in my application. I imported bb.data 1.0 in the main of QML, added bb/data/source data file in the file c ++ main. But when I try to use the qml data source, it gives me the following error: 'value of the default property of 'controls' Type mismatch. Waiting for bb::cascades:Control and found the source of data. ».

  Can someone hepl?

  The question is do you have set the DataSource as the first element in the container, without putting it in the attachedObjects. The container has a 'default' property that is a list of type Control and DataSource is not a subclass of control. Verify the data source examples in the docs and it should show how to use there... inside an attachedObjects: list [].

• Y at - it a paper on how to use the map data the lookup value?

  I'm looking for a documentation where I could find information about the game of card data and how to use the map data configured according to look.

  Any help is very appreciated.

  I found a few threads on data cards:

  http://topliners.Eloqua.com/docs/doc-2434

  http://topliners.Eloqua.com/docs/doc-2817

  http://topliners.Eloqua.com/message/14058#14058

  Maybe that can help you get started

• How to extract data using the xml data type

  Hello
  I tried the following example using the xml data type, but not the desired output.
  could you please correct the query in order to obtain the necessary
  

  CREATE TABLE TEST.EMP_DETAIL
  (
    EMPNO       NUMBER,
    ENAME       VARCHAR2(32 BYTE),
    EMPDETAILS  SYS.XMLTYPE
  )

  Insert into EMP_DETAIL
     (EMPNO, ENAME, EMPDETAILS)
   Values
     (7, 'Martin', XMLTYPE('<Dept>
    <Emp Empid="1">
      <EmpName>Kevin</EmpName>
      <Empno>50</Empno>
      <DOJ>20092008</DOJ>
      <Grade>E3</Grade>
      <Sal>3000</Sal>
    </Emp>
    <Emp Empid="2">
      <EmpName>Coster</EmpName>
      <Empno>60</Empno>
      <DOJ>01092008</DOJ>
      <Grade>E1</Grade>
      <Sal>1000</Sal>
    </Emp>
    <Emp Empid="3">
      <EmpName>Samuel</EmpName>
      <Empno>70</Empno>
      <DOJ>10052008</DOJ>
      <Grade>E2</Grade>
      <Sal>2530</Sal>
    </Emp>
    <Emp Empid="4">
      <EmpName>Dev</EmpName>
      <Empno>80</Empno>
      <DOJ>10032007</DOJ>
      <Grade>E2</Grade>
      <Sal>1200</Sal>
    </Emp>
  </Dept>
  '));

  I need to get the record for Empid = '2'
  Then tried the following query with no expected o/p

  SELECT a.empno,a.ename,a.empdetails.extract('//Dept/Emp/EmpName/text()').getStringVal() AS "EmpNAME",
       a.empdetails.extract('//Dept/Emp/Empno/text()').getStringVal() AS "EMPNumber",
        a.empdetails.extract('//Dept/Emp/DOJ/text()').getStringVal() AS "DOJ",
        a.empdetails.extract('//Dept/Emp/Grade/text()').getStringVal() AS "Grade",
        a.empdetails.extract('//Dept/Emp/Sal/text()').getStringVal() AS "Salary",
        a.empdetails.extract('//Dept/Emp[@Empid="2"]').getStringVal() AS "ID",
        a.empdetails.extract('//Dept/Emp[EmpName="Coster"]').getStringVal() AS "CHK"
       FROM emp_detail a 
       where empno=7  
             AND a.empdetails.existsNode('//Dept/Emp[@Empid="2"]') =1

  Thank you...

  Karthick_Arp wrote:
  I'm not very good at that... But if your XML code should not be more like this

  SQL> Insert into EMP_DETAIL
  2     (EMPNO, ENAME, EMPDETAILS)
  3   Values
  4     (7, 'Martin', XMLTYPE('
  5    
  6      1
  7      Kevin
  8      50
  9      20092008
  10      E3
  11      3000
  12    
  .. cut ..
  

  Why? It is perfectly valid to data as attributes rather than elements and also quite common for key values.

• What happened to the button on the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? I use it all the time and it is not on FF4.

  What happened to the button on the left end of the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? You can look at the drop down window of pages and just choose whatever you want. I use it all the time and it is not on FF4. I want to go back to the old FF.

  If you right click on your back button, or click and hold down the mouse button, it will display the list. (I prefer a click-right, because sometimes my fingers slide when I try to click and hold)

• You can use the same connection to mobile broadband on your laptop & a smart phone?

  You can use the same connection to mobile broadband on your laptop & a smart phone?  IE, exchange between one & the other not use both at the same time?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking

  It will be useful.

• How to post JSON using the Oracle Data Service remains

  I use the regular (not NoSQL or something) oracle database with oracle rest data service. Now I need to post data / put wrote in the body of the request using some json/xml format, how to consume them using the rest data service, searching inside the express application?  important: using pl/sql block

  Also, I am on,

  Data service Oracle rest 3.0

  Oracle Application Express 4.2

  Post edited by: Jacynthe

  OK, I got the answer. At the express request, there is a link called body variable (: body in BLOB). but the BLOB data type. So, we have to convert that in other data, type what we in pl/sql. I've converted data type witch CLOB supports json.

• Using the default date for a variable presentation

  In the report, I want to use the default date of the variable presentation.
  If I use the query as below, default is correctly.but if I pass the dash prompt date value that is throwing error
  
  Someone help me change the below
  request for valid results?
  
  TIMESTAMPADD (SQL_TSI_day, (dayofmonth(date @{asdf}{date '1900-01-01'}) *-1) + 1, date @{asdf} {date ' 1900-01-01'})
  
  Published by: user12255470 on December 2, 2010 12:11
  
  Published by: user12255470 on December 2, 2010 12:12

  Try this:
  TIMESTAMPADD (SQL_TSI_day, (dayofmonth(date '@{asdf}{1900-01-01}') *-1) + 1, date ' @{asdf} {1900-01-01} "")

  Mark answers quickly.

  J
  -bifacts
  http://www.obinotes.com

  Published by: bifacts on December 2, 2010 15:21