You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive. able to read DVDs
You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive. able to read other DVDs
Hi, Virgil,.
1. what kind of DVD are you trying to format (DVD + R or DVD + RW)?
2. you receive messages or error codes when you try to format the drive?
You can check if you are able to format the DVD in another computer.
You can also read the following article and check:
Tags: Windows
Similar Questions
-
I am using Windows Vista & trying to download Norton Security Suite for Comcast Xfinity.
I am the user principal and administrator of this desk top using Windows Vista Home. I'm trying to download Norton Security Suite Dowload Manager of Comcast Xfinity. When I select "Run" I get the message "Download Manager requires administrator privileges to download and install the product." It only allows me to run the selected product.
Hello
Download and save on the desktop > then right-click on it and select run as administrator.
See you soon.
-
8 GB of memory used not appearing is not in the drive as impossible to format the drive.
Original title: memory used unidentified...
recently, I have partitioned my c: / in 2 disks. A disc has 8 GB of memory and it doesnot appear in the reader. I tried to format it but can't format the drive due to some reason.please tell me, why is what serves my 8 GB? and how to recover this memory? answer please...
Hi Sunny,
To better understand the issue, let me know what happens when you try to format the drive? You get the error message?
This problem could occur if the files are hidden.
Try the steps listed here and see if it helps:
Method 1:
We will check if there are all the hidden files in the player. To verify that the same as follows:a. open the drive that has the problem.
b. click on the view tab.
c. check "items Hidden."
Check now if all the files or folders are appearing in the player.
Method 2:
If the problem persists, I suggest you to check if there are all the files in the drive through command prompt.a. press Windows Key + r
b. type cmd and press enter.
c. in the open prompt window, type the following commands one by one and press enter after each command.
: (e.g. d :) dir
d. This will show all the directories or folders in the drive.
e. check for all the folders inside the car.
Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.
-
How to completely reset my emachines computer you use windows vista, back to factory settings
you try to reset my husband (my old man) a computer to factory settings, I have the disc that came with it. But it asks where you want to install windows? And I do not know which of the two options to check. I want to completely rest the whole damn thing! to the factory settings. I need first of all go to computer and reformat the drive c and d both and then go into the installation disc and then install or what?
Hello
Please ask this question throughout these Forums of Vista will stop you.
For moderators, please merge:
http://answers.Microsoft.com/en-us/profile/f750afd8-9B40-4FF7-8911-be843623ef83
You answered no to the support offered to you in one of your other Threads:
And this is the first time you mentioned it is an eMachine and you have a recovery disk.
You should normally install windows on the C: partition, but we don't know how he put up with the installation on the eMachine recovery disk.
eMachine belongs to Acer and Acer used to put in place their hard disk with two partitions + a hidden recovery Partiiton
Please contact eMachine support at the following link for the exact way to use their recovery software.
http://www.eMachines.com/EC/en/us/content/home
See you soon.
-
When you use Windows Vista Home Premium search, no results wouldn't come
When I opened early and try to get whatever it is, there's nothing at all. Or if I tap a file that I know is indexed I try advanced search, select all and fill in the appropriate information and also check that the fi not indexed box. I then start search and he seeks but nothing can't and never has. When it says try search files that does not work either. I do not understand why the search box never showed a file that I know exists and is indexed, or more importantly why nothing comes up at all? Anyone know what could be the problem? Hope you get this feature to work. I use Vista Home Premium and Explorer 8.
Hello
Method 1:The most likely reason is that you are looking a limited set of locations. Indexed locations, all of the files used by default, includes most of the places common you might want to search for. However, you can extend your search by adding additional locations to the current search in the search folder. Here's how:
a. in the search pane, click Advanced search.
b. click the menu location , then everywhere.
Method 2:
Also if the index looking for files that you know problems must be located in a location indexed; You may have to re-create the index. This can take a long time to complete. To rebuild the index:
a. open indexing and Search Options by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Indexing Options.
b. click Advanced Options, click the index settings tab and then click rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Refer to the below help links -.http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching
I hope this helps.
-
I created a slide show movie maker in Windows Vista - but it will only play on the movie maker - cannot download on facebook; the burned DVD is not compatible with basic DVD players. Nothing does support that kind of file - how can I convert this file into something that can be shared and played on other devices.
. MSWMM is not a movie file... This is a Movie Maker project
file is useful for a re-release in Movie Maker.If publish you (save) project in the. Film WMV format...
It can be played in Windows Media Player, shared with
other people and burned on a DVD-video using Windows DVD
Maker.See Help on editing the following articles:
Windows Vista - publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-MakerMovie Maker Vista - Edition
http://www.Papajohn.org/Vista-publishing.htmlWindows Vista - Windows DVD Maker - burn video disc
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc -
Drive external hard used on the windows computer wants me to format the drive after use on a mac
To get into the details, I have a 1 TB western digital hard drive that I used for a few months to work on a laptop running windows 7. One of my friends using a macbook borrowed my hard drive and now when I plug it into my laptop I got the error message "you need to format the disk in drive d, until you can use it. The options are to format or cancel it. If I have to cancel it, give me the D:\ message is not accessible. The disk structure is corrupted and unreadable. This is the drive I have months of data to work on it and I need to be able to use it as soon as possible.
Run as administrator command prompt and run the following command to repair the disk structure.
CHKDSK D:/F/x
It will correct the errors on the disk by removing the volume. Once the process is complete, try to access again.
-
Equipped with Vista
Hello
I suggest that you check if there are codecs appropriate to run the file. -
I have an old HP1120C printer. HP lists as compatible, and refers to the Microsoft site. List of Microsoft confirms that the printer is compatible and no new drivers are needed. I try to load the driver and Windows 7 says that the driver is not compatible.
What can I do?Hello
Many thanks for the info Dominic.
But y at - there no written document, which approves your statement "HP chose not to make the drivers supplied to Microsoft available for download on the HP site".
Webpage of HP here indicates that there are drivers on Windows Update but it will not be available on HP.COM drivers. If your printer is connected by USB then install it as shown here on the site of HP . If you are sonnecting by the LPT port, and then follow these steps: go to the folder, devices and printers, add a local printer, use a Local Port, LPt1: (or whatever port is appropriate), then the update of Windows (from the selection in the lower right box), wait for the list to repopulate , and then select the manufacturer HP (Hewlett-Packard not) and select the printer Deskjet 1120c in the list.
-
"Unable to format the drive in Windows.
"Unable to format the drive Windows" (c drive)
Victory impossible to format the drive sys (win). It's more like a branch of cut while you were sitting on it.
If you try to clean reinstall win that you start from the cd of the winxp http://michaelstevenstech.com/cleanxpinstall.html
-
FAT32 formatting for 500 GB Seagate external hard drive using Windows Vista
How to format FAT32 file system for 500 GB Seagate external hard drive using Windows Vista?
Hi MVRMVR,
Windows will work generally only format a drive in FAT 32 if it has a capacity of 32GB, no more. To format in FAT32, Yes, would need to create multiple partitions. This, of course, you don't want to do.
I have not tried to format a large drive in FAT 32 but I guess that any third-party partitioning software (Acronis, Paragon etc.) would be able to do it without any problem. Alternatively you can do it from the Windows command prompt. For more details, see the link below:
http://www.online-tech-tips.com/computer-tips/formatting-external-hard-drive-to-FAT-32/ John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com
-
I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.
Alan McC
Do you have other accounts of users on this PC? If you install this update from the main account?You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
If sure that nothing else is running, and then install the update manually. Give it a try and let us know the results.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I had problems with windows live mail, I uninstalled it, now I have no mail at all, I was using windows vista
Hello
You can download, install, and configure Windows Live Mail again or use Windows Mail, which is the default email program in Vista.
How to set up Windows Mail.
Contact your ISP (Internet Service Provider); They provide your broadband / dial connection.
Ask them to:
1. your username with them
2. your password with them.
3 incoming mail POP3 server.
4. the outgoing mail SMTP server
All the settings that you need to come from them, not Microsoft; and they are usually happy to help you set up your e-mail program.
You can use this guide to set up Windows Mail:
See you soon.
-
I use Windows Vista and that you need to download SQL Server 2005 Express Service Pack 4. I get an error code 64 C help, please.
Hello
I suggest you to try the steps below and check if it helps.
Method 1: Try to reset components to update Windows from the following link, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058
Method 2: If the problem persists, then try to set up your computer in a clean boot state, and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 3: Also try to install the updates manually from the link below.
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=184
You can also consult the following link for more information:
Troubleshoot problems with installing updates.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Hope this information is useful.
-
I use Windows Vista and you want to use a help file (.hlp).
I use Windows Vista and you want to use a help file (.hlp). There should be a program to allow this, but I can't find the download button. http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=6EBCFAD9-D3F5-4365-8070-334CD175D4BB&displaylang=en
Please advise or suggest another location
Thank you
Hello
Be sure to get one that fits your version of Windows.
I can not open Help files that require the Windows Help program (WinHlp32.exe)
http://support.Microsoft.com/kb/917607Windows Help program (WinHlp32.exe) for Windows 7
http://www.Microsoft.com/downloads/details.aspx?FamilyId=258AA5EC-E3D9-4228-8844-008E02B32A2C&displaylang=enI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
I use trusteer for banking report, but it will not support the beta version of firefox 9, suggestions
-
Portege Z830 - Recovery DVD won't boot to the top
Hello I buy the Toshiba Recovery DVD to restore my Toshiba Portege Z830. I tried to start by using a USB external DVD drive, I select the device in the boot menu, but the computer is found from the HARD disk in any case. Any help? Thank you.
-
I was able to add a PreUUT reminder to a single sequence to allow me to understand the SequenceFile.Version and the SequenceFile.Path to the header of my report. The station ID: TESTENG6-DMA Serial number: NONE Date: Friday, October 17, 2014 Time: 09
-
Had a computer with a hard drive dead, where the only way I could create some restore disks was in safe mode and running the EXE file directly from the drive Q. He created the startup disk and diskettes 3. I put in a new hard drive and when I try to
-
Can anyone suggest me please how to find the location of the emulator/device
Hi friends, I'm trying to get the location of the emulator/device. can someone suggest me please how to do it. The code I am using: CR = new Criteria(); System.out.println ("criteria created instance."); cr.setAddressInfoRequired (true); cr.setAltitu