You want to use the gamepad XBOX 360 on Windows 7?

Similar Questions

• I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

  I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

  Plug it in and let the auto drivers install.  I use mine all the time.

• Gamepad Xbox 360 for Windows pc freezing when the vibration is enabled

  Anyone know a fix for this, whenever I have the vibration turned on for any game using the controller Xbox 360 for Windows (by cable), it freezes the game and I can't get my PC to respond again by disconnecting the controller.

  This occurs if the game supports natively the 360 controller or not.

  Games question until now:

  Dead Space
  Dead Space 2
  LIMBO
  Tomb Raider: Legend

  Deactivation of the vibration in one of these games feature solves the problem, but does anyone know a solution where I'd be able to use the vibration?

  The problem you are experiencing may be caused by the power of the amount needed when the vibration is enabled. I had the problem on my old PC, that when I used my controller, my sound would play as the speakers had holes in them and that the game would freeze-freeze-start. The Xbox 360 controllers use 500mA, which is over the limit that provides a USB port. With this audio device, a keyboard and a mouse together via a USB port, which is an aspiration constant quite heavy on the USB supply rail.
  I fixed it by getting a small USB 7 port hub which is outwardly the power (this is important) and plug my controller. This way he can draw the entire, there need without slipping down the USB ports attached to the motherboard. Just be sure it's a hub with an external power supply.

  SC Tom

• Downloaded Photoshop Elements, I thought, made me buy my code, then said that my code was not valid. Help, please. You want to use the product.

  Downloaded Photoshop Elements, I thought, made me buy my code, then said that my code was not valid. Help, please. You want to use the product.

  you need a serial number and the installation file.

  the former, http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  the latest,

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• If you want to use the subform or table

  I do a lot of progress with my form. I have two versions: 1) a table is used to repeat data items, and 2) the subform is used.

  For the table, on one line, the "repeat subform for each data element" is checked. When in the preview, it will list as many lines as I allow in the max field for the line. I have 80 rows in preview to an XML file. Most that fits perfectly inside the table is drawn is 28, bit if I set the max value, lines will continue beyond the lower part of the table pulled the bottom of the page. I have not arrived to the point of using a data source again.

  For the subform, the box "repeat subform for each data element" is not enabled. In preview, I get a line. If I have configured a data source, the repetition box could become enabled. I have a subform that placed, then another subform inside which sank the value up and down, and in the form internal sup, I data fields.

  I want to test the form with multiple pages in preview mode, because I have to do different calculations on each page. That's why I put so many lines in the preview of an XML file. With the table, I get several lines, but I couldn't find a way to move to another page.

  I need 28 expandable data by page elements and you need to have multiple pages. Comments would be appreciated. Thank you

  There are several ways to go about this, but a lot of this depends on how the data are sought to sink. Should a total of footer info be at the bottom of each page or just at the end of the table? Even with the fields at the top of the page - they need to be on all pages or just the beginning?

  The joint can give you something to go.

  I set up 3 areas of content on the master page - ContentArea1 to hold the header fields, ContentArea2 for the repeating table and ContentArea3 to hold the fields in the footer. For the header and footer areas move all fields in the master page in these subforms and configure as appropriate fields instead of float fields.

  For subforms: kN is set in place in ContentArea1, subtable is set to flowed in ContentArea2 and secondary footer the value ContentArea3. I wasn't sure of the parameters for the flow to the correct content area, but it does not work at the moment so the table continues to flow into the ContentArea2, when it breaks to a new page.

  I set the table for 50 items, it takes a few pages to see what is happening. I have also set up the table with the fields instead of floating fields.

  If you don't need the static header and footer on each page areas, you have a subform flowed main which holds everything, with the same configuration from inside this main Subform subform, the subform footer would then get shoved along after the table:

  subMain (cast)

  -KN (positioned)

  -Subtable (cast)

  -footer secondary (positioned)

  My other thought is that if it was me I would recreate the form in LC instead of trying to use the old art in the background.

  I hope this helps!

• retired former host ESX 3.5 and you want to use the license for the new ESX 3.5host

  We put one of our ESX host out of service and will be replaced by a new ESX host.  I would like to use the license from the old host to the new host.  How do I do that?

  BY stopping the old host you have returned the licenses to the pool available and ready to be used by the new host.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• gamepad Xbox 360 as seen in "Device Manager", but not recognized as "game controller": does not work in the game

  I connected my xbox 360 controller to my pc with the usb cable and downloaded the driver (I run XP Pro 32).  His does not work in-game.  I can see the controller in Device Manager (under the new group called xbox 360 devices) but it does not appear under "game controllers" in the control panel.  Im trying to use it with the Flight Simulator x.

  Hi Absolutemar,

  Welcome to the Microsoft Answers Community Forum site!

  In order to resolve your problem, please visit the below mentioned link.

  http://www.xbox360forum.com/Forum/

  Please perform the following steps also suggests:

  First we suggest you to download the Xbox 360 controller from the below mentioned link:

  http://www.Microsoft.com/hardware/gaming/ProductDetails.aspx

  Then install the Xbox 360 on your computer:

  Note You must install the software on your computer before you connect the gamepad Xbox 360 for Windows on your computer.

  To install the software, follow these steps:

  1. open the software that you downloaded from the Microsoft Windows gaming website or insert the Xbox 360 Controller for Windows installation disc in your computer's DVD or CD drive.

  If the screen does not appear automatically, click Start, click run, type the following command in the Open box and then click OK:

  DriveLetter : Setup

  For example, if the CD-ROM or DVD drive is drive E, type type, and then click OK.

  2. on the configuration screen, click install.

  3. follow the instructions in the Installation Wizard to complete the installation.

  Note You may be prompted to restart the computer.

  For more information about the Xbox 360 installation on your computer, visit the below mentioned link:

  http://support.Microsoft.com/kb/906347

  In this case, you need more information, you can visit the link below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• I want to use the Windows Easy Transfer Wizard, but when I get to the point where I chose the media to receive data, it is by default on the floppy drive 'A'

  Original title: I want to use the Transfer Wizard files and Windows, but...

  When I get to the point where I chose the media to receive data, it uses by default the floppy drive 'A', but I don't have a floppy drive on my computer. The other options it offers for external drives are four housing in my card reader. How can I get my External Hard Drive optionally offer?

  Thank you for your help.

  E-mail address is removed from the privacy *.

  Hello

  You must select the same transfer method that you selected on the old computer.

  I would recommend that you follow the steps in the present statutes, once more and check if they help.
  http://support.Microsoft.com/kb/306187
  http://support.Microsoft.com/kb/306186

• I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  Hi Arvin,

  The question you posted would be better suited in the Xbox Forums. I would recommend posting your query in the Xbox Forums.

   

  Welcome to the Xbox support

  http://support.Xbox.com/en-us/

  Hope this information helps.

• I want to use Outlook Web Access for Mac, I don't want to use the light version, I want the full version, but you can't push off the mark. I have firefox 3.6.10

  I want to use Outlook Web Access for Mac (snow leopard 10.6.8), I don't want to use the light version, I want the full version but I can't push off the mark on the light version. I have firefox 3.6.10

  (1) you must update at least Firefox 3.6.24 because there are questions of SECURITY of KNOWN MANY with the version you are using.

  (2) the light version is required on non - IE browsers, except if you are running Exchange Server 2010. With Exchange 2010 they added support for multiple browsers run in the version "no light".

• I can't open anything without: "choose which program you want to use to open the file with" and "Application not found".

  I got a used computer and it worked fine for a while. I guess that I did something for her, because now I had a problem with the opening just like files and almost all of the icons in the start menu. I found someone had mentioned this on another post, but it has not been answered and I have the same problem:

  "I don't know what to do. I tried reseting IE back to its "settings by default, but nothing seems to work. It doesn't let me open any programs on my computer. I can't even find the virus because there asking what program I want to open it with and when to choose IE he sent me through a series of 'SAVE or RUN' windows and then back to the "choose a program you want to run the file with.» I am only able to access the internet via a shortcut of Internet Explorer button that I dragged on the start menu, because the original one on my desk does not open. »

  It's the best way I can explain this problem. I've had this problem for a while now and I have looked everywhere for an answer and still nothing. It would be great to get help, thank you!

  After much research, I found the answer here:

  http://WindowsXP.MVPs.org/exefile.htm

  But thanks for the help!

  This problem has not helped me with my problems to download iTunes correctly, that's why I set out to solve this problem in the first place. I also get a lot of it popping up every 10 minutes:

  "MobileDeviceService has encountered a problem and needs to close. We are sorry for the inconvenience. »

  The error signature is always:

  szAppName: AppleMobileDeviceService.exe szAppVer: 17.88.0.8

  szModName: kernel32.dll szModVer: 5.1.2600.5781 offset: 00012afb

  It won't do anything when I click to send error report or not, it does not close anything as it is normally would. I think it might have something to do with the steps I took to reinstall iTunes properly...

  And

  1. I use Microsoft Windows xp Version 5.1, at least that's the stuff I wrote, do not know if this is the answer you're looking for. I am not sure computers.

  2. my anti-virus software is ESET NOD32 Antivirus 4

• Error "windows cannot open this file. to open this file, windows needs to know what program you want to use to open it"appears just after the start on its own.

  After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it.  At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.

  What can I do to fix this?

  It's a site file

  Hi Jose7777777,

  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the startup folder.

  I hope this helps.

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• When you try to open a program, get the area "Choose the program you want to use to open this file".

  When I try and open a program I get the box "choose the program you want to use to open this file. Also, when I try and access any of my icons in my control panel, I get a message saying 'C:\WINDOWS/system32/rundll32.exe. Aplication not found. "

  Uninstall mywebsearch toolbar, Zynga, my fun cards

  Check these then check fix checked. Narrow browsers

  O2 - BHO: (no name) - {5C255C8A-E604-49b4-9D64-90988571CECB} - (no file)

  O3 - Toolbar: (no name) - {CCC7A320-B3CA-4199-B1A6-9F516DD69829} - (no file)

  O4 - HKLM\... \Run: [NeroFilterCheck] C:\WINDOWS\system32\NeroCheck.exe

  O4 - HKLM\... \Run: [HP Software Update] C:\Program HP HP Software Update\HPWuSchd2.exe

  O4 - HKLM\... \Run: [QuickTime Task] "C:\Program Files\QuickTime\qttask.exe" - atboottime

  O4 - HKLM\... \Run: [MyWebSearch Plugin] rundll32 C:\PROGRA~1\MYWEBS~1\bar\1.bin\M3PLUGIN. DLL, UPF

  O4 - HKLM\... \Run: [my Web Search Bar scope monitor research] "C:\PROGRA~1\MYWEBS~1\bar\1.bin\m3SrchMn.exe" / m = 2/w/h

  O4 - HKLM\... \Run: [MyWebSearch Email Plugin] C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe

  O4 - HKLM\... \Run: [SunJavaUpdateSched] "C:\Program Files\Fichiers Java Update\jusched.exe"

  O4 - HKLM\... \Run: [adobe Reader Speed Launcher] "C:\Program 9.0\Reader\Reader_sl.exe Adobe."

  O4 - HKLM\... \Run: C:\PROGRA~1\MYFUNC~2\bar\1.bin\c8brmon.exe [MyFunCardsbarIE Browser Plugin Loader]

  O4 - HKLM\... \Run: [TkBellExe] "C:\program files\real\realplayer\update\realsched.exe" - osboot

  O4 - HKLM\... \Run: [KernelFaultCheck] %systemroot%\system32\dumprep 0-k

  O4 - HKCU\... \Run: [BitTorrent DNA] "C:\Program Files\DNA\btdna.exe"

  O4 - HKCU\... \Run: [BitTorrent] "C:\Program Files\BitTorrent\bittorrent.exe".

  O4 - HKCU\... \Run: [MyWebSearch Email Plugin] C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe

  Then download malwarebytesto day then do a full scan

  You are probably infected by something you downloaded with bittorrent

• Whenever I try to open or run all I get "Choose the program you want to use to open this file" and by default, Adobe Acrobat

  Whenever I try to open or run all I get - choose the program you want to use to open this file and its default Adobe Acrobat and he always answers this file type is not supported.  I can't open anything on my desktop, tried to reinstall Java, and even in my computer it asks me to choose a program to open it. Help!   I don't know what is happening!

  * original title - try to refresh, to run or install anything whatsoever, and it will not open executable files.*

  Hi LisaPisani,

  (1) did you the latest changes on the computer?

  (2) when was the last time it was working fine?

   

  Method 1

  See the Microsoft article below and try the steps mentioned, check if it helps.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 2

  If the previous step fails then I would suggest that you perform the system restore point when it worked very well and check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084