You will need to move folders in the left pane.

Similar Questions

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• You will need to activate CS2 on the second computer, but no longer have the serial number.  How?

  You will need to activate CS2 on the second computer, but no longer have the serial number because this copy was a replacement for original who has trashed when the hard drive crashed.  How can I do this?

  Error message: activation not available server | CS2, Acrobat 7, pass a hearing 3

  Only works on Windows or old Mac PowerPC. Modern MacIntel cannot run CS2.

• updated to 38.2.0 and now I can't see the messages. I don't see the list of folders in the left pane.

  I only see the list of folders in the left pane, but the messages are not displayed. It receives without problem, I can't see the emails.

  pscolnik,

  You were usng the lightning/calendar addon in time. Are you still using it?

• my computer will load any upward. you will need to delete or retrieve the software?

  My sister has deleted some files in the windows folder and now computer wont charge up, so I can't reset the hard drive of the computer. How can I clear the computer when it won't start?

  Hello

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• You will need to run Photoshop listener the bridge code?

  Is it possible to run code to the listener to Photoshop from the bridge.  I'll have to use the listener because the script goes through is a third-party tool and its functions and settings are not exposed (a couple hundred lines of code in the listener).  So far with bridge I found that its pretty easy to ask him to do one simple thing of bridge but to do more than one line is a lot of work.

  Is there a way to send a piece of script Phothshop bridge?

  Another option I thought, had a bridge run Photoshop separate script, is - it possible... i. e a key to the bridge run Photoshop script.

  Sorry for all the questions... I'm new to the Adobe script template and I found very little documentation and online examples are hardest hit and Miss.

  Thanks in advance for any help!

  You can run scripts Photoshop while bridge using bridge talk. You download the SDK describing how to do it here:

  Bridge Developer Center | Adobe Developer Connection

  There are also many examples on these forums about using bridge talk like this:

  I want to know how to use the 'bridge to talk. "

• You will need to double click on the thumbnails to change the page in view. Is there a way of only simple click on the photos to change the page in the main view?

  I use Adobe Acrobat Pro XI on Windows 8.

  A single click works normally...

• You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

  You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

  I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

  Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

• You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  tried in SOUND > Speakers > CONFIGURE it on by clicking on the right left speaker sound time and vice versa.

  Hey DiegoWO,

  There is not currently an option within the OS to achieve.
  However, your drivers audio pourrait have a built-in effect that allows you to reverse the stereo sound. If you do not see a separate application to manage your sound, you will need to visit the website of the manufacturer of your sound card and install the latest drivers.

• You will need to download and install on my new computer the Adobe Acrobat XI Pro student and Teacher Edition. How can I download it?

  You will need to download and install on my new computer the Adobe Acrobat XI Pro student and Teacher Edition. How can I download it?

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859

• you will need to update my version no CC in lightroom (the last update, 6.2 I think). where can I find this CC download no

  you will need to update my version no CC in lightroom (the last update, 6.2 I think).

  The latest version is 6.3, go to the Help Menu and there are updates... choose.

• I want to cut out spaces (bottom) of a ramp, so when I move the ramp to another location, you will be able to see through the cutting of the spaces and see the new view behind the railing

  I want to cut out spaces (bottom) of a ramp, so when I move the ramp to another location, you will be able to see through the cutting of the spaces and see the new view behind the railing

  marvwfactor

  What version of Premiere Elements and on what operating system works - it?

  Video or?

  Waiting for more information, you can apply ChromaKey (an effect of overlay of the effects of the program) to convert the solid color background areas in transparency. The success will depend on the nature of the solid color and how his strong colorrelates to the rest of the colors in the image.

  Please review and consider and provide more information, so that we can give you an answer with substance.

  Thank you.

  RTA

• I can't update my CS5 because I loaded Yosemite on my iMac. you will need to update the files camera raw.

  I can't update my CS5 because I loaded Yosemite on my iMac.  You will need to update the raw files.

  Please try and reinstall CS5: stalling-yosemite-version-10-10-on-imac http://feedback.photoshop.com/photoshop_family/topics/problems-with-photoshop-cs5-after-in it seems that the update of the OS is corrupt PS CS5 if it was installed before the upgrade to Yosemite. Let me know if that will fix it for you.

  With the permission of Jeffrey Tranberry

• You will need to disable the first 10 items?

  I have a new laptop and downloaded my first items 10 and Photoshop. However, I got a message when I opened the first telling me that I needed to disable it on another computer. But I can't figure out how to turn off!

  In addition, I don't know if it's connected with my need to turn off or if it's just the computer, but I can't use one of the links in the menu to create on the old laptop, and I can't connect to my Adobe ID on either.

  Can someone help me?

  PS: If it's important, all of my new laptop runs on Windows 8 and the old man is 7.

  TsukiNaito1

  Adobe permits you to use your first items purchased 10 on only 2 of your computers serial number. If you want to put this on a 3rd computer serial number you will need to 'Disable' installation on PC 1 or 2 to get this serial number of first Elements 10 purchased on computer 3.

  The message you get on computer 3, you are saying that your first 10 items is on more than 2 of your computers already (computer 1 and 2) and you want to install it on another (the 3rd computer).

  So, where you have first Elements 10 installed?

  Go to one of these first Elements 10 computer configurations. Open first items 10 to its workspace. Go to help Menu/disable and click on disable for this. Close to there. At this point, you can

  a. leave the program installed but disabled on computer 1 or 2 as the case

  or

  b. Uninstall computer 1 or 2 as the case mya.

  Please see the newsletter and let us know if the above is clear and works for you.

  Thank you.

  RTA

• you will need to determine the end of the video.

  I need to know how when I arrived at the end of the video.  I seem to remember there is a new Flash 10 command that will allow you to know without having to track the total number of bytes used or time elapsed or anything complicated like that.  Does anyone know the command that I'm talking about?

  If you are using a component FLVPlayback instance, you can use the VideoEvent.COMPLETE event (that you will need to import).  If you use the netstream class, you can use the onPlayStatus event.