You will need to replace the drive hard, etc.

Similar Questions

• You will need to replace the motherboard. Can I carry on my copy of windows oem 7

  Recently I'm having problems with my motherboard and need to replace it, but do not know how to send my copy of windows 7 to the new motherboard.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_for_hobbyists.aspx

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  I suggest you reduce future losses by investing a full commercial license.

• Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

  Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

  Migration of CS4 breaks the license. That's what 150:30 means. Assuming you are using a Mac.

  You can use the Terminal method to repair the license... but I stress that carefully read you and understand the instructions here before you run it. beginning

  # 11. https://forums.Adobe.com/thread/1714695

  If this isn't what you want to do, you have to reinstall.

  Gene

• You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

  You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

  I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

  Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

• You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  tried in SOUND > Speakers > CONFIGURE it on by clicking on the right left speaker sound time and vice versa.

  Hey DiegoWO,

  There is not currently an option within the OS to achieve.
  However, your drivers audio pourrait have a built-in effect that allows you to reverse the stereo sound. If you do not see a separate application to manage your sound, you will need to visit the website of the manufacturer of your sound card and install the latest drivers.

• I can't update my CS5 because I loaded Yosemite on my iMac. you will need to update the files camera raw.

  I can't update my CS5 because I loaded Yosemite on my iMac.  You will need to update the raw files.

  Please try and reinstall CS5: stalling-yosemite-version-10-10-on-imac http://feedback.photoshop.com/photoshop_family/topics/problems-with-photoshop-cs5-after-in it seems that the update of the OS is corrupt PS CS5 if it was installed before the upgrade to Yosemite. Let me know if that will fix it for you.

  With the permission of Jeffrey Tranberry

• Need to replace the internal hard drive

  Hello all, I need to replace the hard drive internal for T61p, product identification 6459cto. What I ask? Thanks Ldxrunner 2015

  Ldxrunner2015 wrote:
  Hello all, I need to replace the hard drive internal for T61p, product identification 6459cto. What I ask? Thanks Ldxrunner 2015

  for the readers of plateau...

  You can use any 2.5 ", height 9.5 mm SATA drive. I got one for hitachi travelstars (now owned by western digital), which were originally ibm. others have all also good luck with (and loyalty towards) other brands. Choose your ability, the speed, the size of the cache, etc. of many online merchants have a good selection.

  for SSDS.

  same features as physical size above. you will need to do research in reliability, chip controller oddities, etc., but they get a lot more reliable. they need it another type of disaster recovery plan, however, as failure means no data is salvageable I heard. with top readers, depending on the type of failure, some recovery is generally possible without resorting to expensive professional services.

  for both types of readers, you should be able to use disks of 7 mm of height also long as you install the drive in the case of existing drive and use rubber track. This maintains alignment connector with the drive Bay.

  HTH.

• 5530 Evvy replaced printer - need to replace the driver and software?

  Hello

  Recently, I had to feel my 5530 all-in-One printer replaced while it was still under warranty. The replacement came with new driver software and everything, but since it is the same model that I decided not to install it and use the existing driver installed on computers instead. (Replacement not be come with directions for uninstall, said by the way.)

  The new printer is connected to the wireless network (using touch screen) and is recognized by computers on the network, but I can't get anything to print, since the existing driver HP software does not seem to 'find' the printer. Do I still need to uninstall the driver and reinstall? And what about the other programs installed with HP printer?

  The computers are all Windows 7 64 bit.  I'm not very technical, so it makes me a little nervous.

  Thanks for any help you can give.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• You will need to disable the first 10 items?

  I have a new laptop and downloaded my first items 10 and Photoshop. However, I got a message when I opened the first telling me that I needed to disable it on another computer. But I can't figure out how to turn off!

  In addition, I don't know if it's connected with my need to turn off or if it's just the computer, but I can't use one of the links in the menu to create on the old laptop, and I can't connect to my Adobe ID on either.

  Can someone help me?

  PS: If it's important, all of my new laptop runs on Windows 8 and the old man is 7.

  TsukiNaito1

  Adobe permits you to use your first items purchased 10 on only 2 of your computers serial number. If you want to put this on a 3rd computer serial number you will need to 'Disable' installation on PC 1 or 2 to get this serial number of first Elements 10 purchased on computer 3.

  The message you get on computer 3, you are saying that your first 10 items is on more than 2 of your computers already (computer 1 and 2) and you want to install it on another (the 3rd computer).

  So, where you have first Elements 10 installed?

  Go to one of these first Elements 10 computer configurations. Open first items 10 to its workspace. Go to help Menu/disable and click on disable for this. Close to there. At this point, you can

  a. leave the program installed but disabled on computer 1 or 2 as the case

  or

  b. Uninstall computer 1 or 2 as the case mya.

  Please see the newsletter and let us know if the above is clear and works for you.

  Thank you.

  RTA

• you will need to determine the end of the video.

  I need to know how when I arrived at the end of the video.  I seem to remember there is a new Flash 10 command that will allow you to know without having to track the total number of bytes used or time elapsed or anything complicated like that.  Does anyone know the command that I'm talking about?

  If you are using a component FLVPlayback instance, you can use the VideoEvent.COMPLETE event (that you will need to import).  If you use the netstream class, you can use the onPlayStatus event.

• need to reformat the drive hard after that installation fails

  After several futile attempts to update my computer and I couldn't was the first get the bad image of SLIU.exe error, I tried ccleaner, malware nothing has worked, so I decided to do a reinstall = so I have inserted the windows cd and started doing an installation, but it would not install service pack 1 not even the stand-alone version.

  so I decided to install win 7 again and got a corrupt c:\windows.old.001\windows\servicing\sessions file setup.exe is corrupt and unreadable, please run chkdsk utility

  executing the ckdks and now he says it's error correction in the index file $SII 9

  I want to just reformat the drive and do a fresh install.

  the drive hard seagate [passed all test

  What is the step by step to reformat the hard drive

  I have an external hard drive with all my backup files. that I don't worry, I want just the computer working again.

  Plug

  Home build

  Win 7 ultimate

  card mother p45 MSI neo

  4 GB corsair ddr d

  1 TB of Seagate hard drive

  Intel dual caore 8400 cpu

  NVIDIA g8400 video card

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• need help to replace the drive HARD on HP Pavilion laptop computer model 17-e118dx / 17.3 AMD A8

  Hello

  I'm looking for advice, tutorials or links which will help me safely access my hard drive for repacement. I found a screw that holds a back cover, but the cover would not budge after removing the screws. Other info: 17.3 AMD A8 750 GIG. Also interested in information related to the upgrade / increase memory and if possible, upgrade to backlit keyboard.

  Thank you

  Scott

  Hi Scott

  Here is your manual: http://h10032.www1.hp.com/ctg/Manual/c04069163.pdf

  Go to Page 6, 49-51, 54 for details & alternative methods.

  You can upgrade to 1 TB

  Maximum RAM upgrade is given as 8 GB max in this form: http://support.hp.com/us-en/document/c04235458
  You can add another 4 GB in the other slot with the same configuration - DDR3L PC3L-12800 1600 MHz 1.35v SODIMM SDRAM

  Unfortunately,.
  Changing the keyboard cannot be done, motherboard has changed for this.

  Thank you

• Replacing the drive HARD on Portege R400

  HI people,

  Can someone point me to a disk for the R400 replcacement? Those listed on www.topazsupport.co.uk is horribly too expensive, of course, I'm looking for a drive 1.8 "standard that fits this model.
  I noticed that the current HARD disk has a female connector while the disks hard most seem to have a male (I say "appear" because nobody seems to actually have real pictures of their readers for me to know)!

  Thank you

  Ferg.

  According to specification for laptop, your laptop has 80 GB 1.8 inch PATA HDD.

  To be honest I don't know what to do, you mean with standard HARD disk. The fact is that you must use compatible HARD drive for your laptop model. According to the specifications of the laptop, you can use disk TOUGH MK8007GAH. In my opinion, you need replace HD with the same model. So you can be sure that everything will be OK. I think also a capacity of 80 GB is sufficient.

  I found nice pictures for you:
  Here is the image of HARD drive
  Here you can see connectors

  At the end, I must say that replacement of HARD drive seems easy but these hard drives 1.8 are more sensitive and pressure on the wrong spot can damage the HARD drive and data may be lost.

  Do you want to replace one?

• Replacing the drive HARD on Portege R700

  Hello

  I just ordered a R700 and hope to upgrade the HARD drive of 320 GB for one SSD OCZ Vertex 2.
  Is it easy to replace the hard drive in the R700? Should I remove the keyboard is a Panel on the back?
  What size hard disk will - 2.5 "or 1.8"?
  A SSD will be simply connect using existing connections, or something else there?

  See you soon.

  According to the specifications of the laptop Portege R700 has 2.5 HARD drive is HDD with SATA interface, so I think that you should order 2.5 SSD with standard SATA connectors.

  HARD drive is placed on the bottom side near the cooling vent and it is fixed with a screw only.

  Remove the screws and HARD drive. You will see how the HARD disc is placed and how it must be removed.
  It's very simple and you can do it alone.

• Replacing the drive HARD on Equium M50-216

  Hello

  I'm looking into upgrading the hard drive in my M50-216, which currently has a MK4026GAX. The player that I am most interested is the MK8032GAX. Is this a suitable replacement, that is going to work?

  A few questions:

  1. I guess it's just a case of withdrawal of the current drive, mortising the new one and start using my Toshiba restore CD? This will reinstall the Norton junk as well?

  2. assuming I have remove the current without shape, i.e. I leave it as it is, I suppose that if I find the new drive does not work I'll be able to put the former back in and it will start like nothing happened? I'm not changing any other material.

  3. it will work as a trolley suitable for the old disk: http://www.scan.co.uk/Products/ProductInfo.asp?WebProductID=414030

  4. the most important question will be affecting my current standard warranty, or assign an extension of warranty if I choose to buy a more this year?

  Thank you
  Baillie

  Old disk HARD 40 GB MK4026GAX
  New disk HARD 80 GB MK8032GAX

  The BIOS should recognize up to 100 GB HARD drive

  1.) Yes it should market. Also, it should be possible to install Norton ghost image files
  2.) Yes, it should be possible to put the old HDD and start the laptop.
  (3.) if the new HARD drive supports the IDE interface, it should be possible to use it in the external USB case
  4.) No, the upgrade of the HARD drive should t has no effect on the guarantee