You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

tried in SOUND > Speakers > CONFIGURE it on by clicking on the right left speaker sound time and vice versa.

Hey DiegoWO,

There is not currently an option within the OS to achieve.
However, your drivers audio pourrait have a built-in effect that allows you to reverse the stereo sound. If you do not see a separate application to manage your sound, you will need to visit the website of the manufacturer of your sound card and install the latest drivers.

Tags: Windows

Similar Questions

  • You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

    You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

    I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

    Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

  • I can't update my CS5 because I loaded Yosemite on my iMac. you will need to update the files camera raw.

    I can't update my CS5 because I loaded Yosemite on my iMac.  You will need to update the raw files.

    Please try and reinstall CS5: stalling-yosemite-version-10-10-on-imac http://feedback.photoshop.com/photoshop_family/topics/problems-with-photoshop-cs5-after-in it seems that the update of the OS is corrupt PS CS5 if it was installed before the upgrade to Yosemite. Let me know if that will fix it for you.

    With the permission of Jeffrey Tranberry

  • You will need to disable the first 10 items?

    I have a new laptop and downloaded my first items 10 and Photoshop. However, I got a message when I opened the first telling me that I needed to disable it on another computer. But I can't figure out how to turn off!

    In addition, I don't know if it's connected with my need to turn off or if it's just the computer, but I can't use one of the links in the menu to create on the old laptop, and I can't connect to my Adobe ID on either.

    Can someone help me?

    PS: If it's important, all of my new laptop runs on Windows 8 and the old man is 7.

    TsukiNaito1

    Adobe permits you to use your first items purchased 10 on only 2 of your computers serial number. If you want to put this on a 3rd computer serial number you will need to 'Disable' installation on PC 1 or 2 to get this serial number of first Elements 10 purchased on computer 3.

    The message you get on computer 3, you are saying that your first 10 items is on more than 2 of your computers already (computer 1 and 2) and you want to install it on another (the 3rd computer).

    So, where you have first Elements 10 installed?

    Go to one of these first Elements 10 computer configurations. Open first items 10 to its workspace. Go to help Menu/disable and click on disable for this. Close to there. At this point, you can

    a. leave the program installed but disabled on computer 1 or 2 as the case

    or

    b. Uninstall computer 1 or 2 as the case mya.

    Please see the newsletter and let us know if the above is clear and works for you.

    Thank you.

    RTA

  • you will need to determine the end of the video.

    I need to know how when I arrived at the end of the video.  I seem to remember there is a new Flash 10 command that will allow you to know without having to track the total number of bytes used or time elapsed or anything complicated like that.  Does anyone know the command that I'm talking about?

    If you are using a component FLVPlayback instance, you can use the VideoEvent.COMPLETE event (that you will need to import).  If you use the netstream class, you can use the onPlayStatus event.

  • FRUSTRRATED. you will need to remove the Yahoo toolbar, remove BING and switch back to Google, open new windows in windows separte NOT tabs. Help, please!

    1. I didn't want Yahoo toolbar, but I can't get rid of it!
    2 need to change the new opening of the tabs in a single window several glass separte windows.
    3. somehow, BING has become my default page. How to return to GOOGLE?

    I also use the 3.6.19 version and do NOT want to upgrade to the new version of terrible. Please help thanks 3.6

    In the search bar, click on the little arrow, scroll down and choose "Manage search engines".

    In the menu next, click on Bing , highlight it, and then click Remove.

    If this answers your question, please click the button solved next to this post after logging in to the forum. This will help others looking for a solution to the same thing.

    Thank you.

  • You will need to upgrade the ASP to run on Windows server 2008 and IIS 7.0 application.

    I have an ASP application developed with Interdev 6.0; part of .NET and using the time to design Windows server 2000 controls.

    I need to upgrade the application to run on Windows server 2008 and IIS 7.0 ASP. I find some compatibility problems.

    The part that I'm stuck at the moment is the creation of objects in the runtime that gives an error.

    : "800a01ad" VBScript runtime error
    Component ActiveX cannot create object

    Code:

    Set OF = Server.CreateObject ("DERuntime.DERuntime")
    Application("de") = OF. Load (Server.MapPath ("overall. (ASA"),"_private/DataEnvironment/DataEnvironment.asa")

    The MSDERUN. DLL is properly registered on the server with the correct permissions.

    What are the possible solutions outside the upgrade of all of the ASP.net project. ?

    Post in the Windows Server Forums:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • You will need to change the permissions for the camera application.

    Original title - fresh paint App - settings

    I was testing the waters and accidentally leave refused to use the camera to the computer.   Now, when I click on the camera, it says

    "This application requires permissions to use your camera.

    "You can change this in the settings of the application.

    HOW DO THE APP SETTINGS?   :}

    Hello

    Thanks for posting your query on the Microsoft Community. I understand that you need help to change the permission to use your camera application. I will certainly help you in this matter.

    Method 1:

    Open the camera app, and then follow the steps mentioned below:

    1. Press Windows + C keys on your keyboard to open the bar of charms.
    2. Click the settings option.
    3. Select permissions .
    4. Turn on allow this application to access to your: Webcam and Microphone option.
    5. Close the camera application by pressing Alt + F4.
    6. Take control of the camera application if the application works.

    Method 2:

    If the problem persists please try to troubleshoot the app Windows 8 Apps troubleshooting to diagnose and fix the problem. Please click on link below to run the Troubleshooter:

    http://go.Microsoft.com/fwlink/p/?LinkId=268423

    See also below article for more information:

    http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

    Thank you.

  • You will need to validate the format of the time 24 hours with the check constraint.

    Hello

    I need to validate a field in a table with 24 h format. I created forced bellows, but not validating the only of numbers. Pls help me on this.

    ALTER TABLE ADD RESERVATION

    CONSTRAINT CNST_CHK_VB_ACT

    CHECK (regexp_like (law on the ' [[: digit:]] {4}'))

    ENABLE

    NOVALIDATE;

    Rgds,

    Athuru Mithuru.

    Hi, Athuru,

    Athurumithuru wrote:

    Hello

    I need to validate a field in a table with 24 h format. I created forced bellows, but not validating the only of numbers. Pls help me on this.

    ALTER TABLE ADD RESERVATION

    CONSTRAINT CNST_CHK_VB_ACT

    CHECK (regexp_like (law on the ' [[: digit:]] {4}'))

    ENABLE

    NOVALIDATE;

    Rgds,

    Athuru Mithuru.

    Let's start by defining precisely what you want.  For example

    1. The 1st character can be 0, 1, or 2.
    2. The 2nd character can be any number EXCEPT if the 1st character is '2', then the 2nd character must be in the range ' 0 'to 3'.
    3. The 3rd character can be '0' and '5'
    4. The 4th character can be any digit.

    It's pretty simple code like a regular expression with the exception of the exception in the 2.   Here's a way to get around that:

    REGEXP_LIKE (law on the)

    , ' (' || -options for the first 2 digits of start

    "([01][0-9])' |" --0 or 1, followed by another digit

    '| (2[0-3])'    || -2 followed by 0, 1, 2 or 3

    ')'              || -end of the options for the first 2 digits

    '[0-5]'          || -any digit between 0 and 5

    '[0-9]' - a figure

    )

    As others have said, think about the type of data.  How will you use this column?  If you really need a column which reflects a time of day, but not special, then perhaps an INTERVAL, or a NUMBER (for example, the number of hours after midnight) rather than a string.

  • You will need to download the quicktime plugin to use the Blackboard for the school site. can not find the plug-in but downloaded real quick time. help please, thank you!

    Hello

    I need to download the quicktime plug-in to use certain features on the site, Blackboard, for school. Plugin cannot be found and I downloaded quicktime. Help, please.

    Thank you

    Kirsten

    The QuickTime plugin is part of the QuickTime multimedia player.

    See:

  • You will need to reconfigure the LAN WLAN settings in the Windows XP machine.

    Original title: LAN WLAN Configuration.

    I just did a cover on my hp nx6110 and I was able to get windows xp up and running again. But when I tried to do my job of Lan or Wlan work again once I was told by my ISP that I need to reconfigure my Lan and Wlan on my laptop. Is it possible that I can get information for this instead of bring my laptop to a professional, because this computer is already 5 years and more under warranty. Or is it available by download on a USB stick and transfer it to my new computer to the hp nx6110?

    Hi JohnJacobi,

    You can follow this link and check if it helps.

    To make a connection to the local network

    Hope the helps of information.

    Please post back and we do know.

  • Wvc80n. you will need to change the default ip address?

    My network is 192.168.15.xx

    I know that different default values from the camera to a range of ip addresses. Given that I don't see on the net how to configure it? I used a laptop with a cat 5 with a static ip address range to match the cam but nothing

    THX

    Connect the camera with the Ethernet cable to the Ethernet port on your router.

    Press and hold the reset on WVC80N for 30 seconds.

    Power cycle the camera and the router.

    Open your router configuration page and you will find the IP camera under the table of the DHCP Client.

    As this camera picture automatically takes the IP address of the router.

  • You will need to replace the drive hard, etc.

    Thanks, Hüffer

    Since I was 99% plug-and-play, which means when he says 'naked reader? My expectations are to connect the new disk, run the recovery disks, run my backup files and go from there. It is much more difficult than that?

    Furthermore, what about updates since I generated recovery discs?

    Mr. Donovan

    You should kick him out on the original thread so that people can see it and understand where we have been.

    Yes it's Plug and play at the level of the material... Plug the drive and use it, but it just means that the system detects the drive as material. You still have prep. it and load it with software, but the recovery disc that does for you. If you have used HP Backup and Recovery Manager, you will get a software to factory installation (or maybe a simple OS with the drivers if you have a newer version of the software and chose this option for backup). It's like a time machine, so you have to go back to the future by running Windows Update and reinstall all software non - OEM and then that update (e.g. MS Office) and then migrate your old files on. It's a good afternoon, turned in the tuckus but better that lose everything.

  • You will need to change the password of DBSNMP - what targets.xml?

    Hi all



    We currently have a box of Solaris (sunOS 5.9) acting that has CMS (10.2.0.3) and a repository DB (10.2.0.2) installed on it, as well as the Agent (10.2.0.3).



    He has about 6 target pointing to it (varying in DB level of 10.1 to 10.2). As part of a security audit, we put in place a new password policy, which means changing the dbsnmp < strong > < facilities > password on all databases. Of course, this will affect the GC configuration.



    I know I need to change the targets.xml file but I have the following question:



    on each target, should I put the password for the user dbsnmp on the local target database or the password for the user dbsnmp on the database repository?



    Also, in Chapter 10, point < em > < /em > 2.7.2.1 of the ' 10.2.0.3 Enterprise Manager Advanced Configuration guide "he says that I can just go in GC, chose my database target, < strong > configure < facilities >, enter new password password < strong > monitor < facilities > field, test and submit. Is this just the way of targets.xml edition GUI?



    Thanks in advance,



    Ric.

    Use the emcli to update all the dbsnmp password to only one

    http://download.Oracle.com/docs/CD/B19306_01/EM.102/b40004/cli_verb_ref.htm
    refer. / emcli update_password

  • You will need to disable the automatic connection when I launch Skype.

    When I run Skype (using windows 7) there was to be a box to check connect automatically when I launch Skype or not, this box is now gone and randomly, she sign me automatilly or request my password.

    I still want to ask me my password - if it is possible I would like to also forget my username without having me clear the record in the appdata folder every time...

    So, I can easily leave Skype and if someone else is trying to boot from my computer, they don't see any of my data.

    But I need to at least ask me my password.

    Open tools-> Options-> General settings. Uncheck the option: ' Sign me in Skype on startup. Save options.

    https://support.Skype.com/en/FAQ/FA12081/how-do-i-sign-in-to-Skype-for-Windows-desktop

Maybe you are looking for

  • After the upgrade to Windows 8 on a HP Pavilion dv2799: sound, video, and mouse is stuttering

    My HP Pavilion dv2799 comes with Windows Vista and has always worked very well. However, after I have recently upgraded to Windows 8 32 bit, now sound, video and even the mouse is stuttering. The laptop has a NVIDIA GeForce 8400 M GS, and my approach

  • timer output cRIO

    Hello world I'm new with labVIEW but I need help to speed up my studies to a system, I did work.I work with a cRIO and some AI and DI/O modules. (1) I have an analog input, an AI, that when she is less than a fixed value, say for example 6, it will g

  • Why can I not find the zero-order hold vi?

    I want to use the zero-order hold vi (see link below) http://zone.NI.com/reference/en-XX/help/371599H-01/lvfpga/zeroorder_hold/ I installed the FPGA module, but am unable to find this vi when I search for it. I went using Labview and sought the funct

  • HP officejet pro 8620: impossible to scan a full A4 page on my HP Pro-8620

    I have the same kind of problem:-windows 7 64 bit -USB connected printer Using the ADF or the glass gives the same result: 1 or 2 cm from the bottom of the page is missing (signature...)When I put the document he on the glass, it does not exceed the

  • Any resolution of problems of overheating/stuttering of the GPU from nVidia on T410s?

    I've been searching the forums and you saw a lot of old messages with people having similar symptoms: switchable graphics (nVidia part) overheating and causing problems, stuttering falls down, freezes, etc. under a heavy load. I talked to tech suppor