You will need to use my scanner with PS CC 2015!

Similar Questions

• I tried to reinstall Indesign CC 2014 with no luck. Options? You will need to use folio DPS generator...

  I've updated Indesign CC 2015 without reading about the changes to the Folio Builder and integration with DPS. Now I'm stuck with the new version and no possibility to create my folios for the Enterprise edition. Cloud creation does not give me a previous version of Indesign CC 2014 to download and deleted the update of earlier versions. Workaround solutions, Adobe?

  You must follow the steps to download and install Adobe Creative Cloud apps to "install previous versions of applications. It is not particularly easy, but if you follow the steps and screenshots, you will be able to install the CC2014 version.

  Neil

• You will need to insert update column with the username?

  Hi all
  
  I'm new to this forum of the apex. New to apex as well.
  
  My question is do we have a form and a single column is editable by the user. whenever an update to this column, I need to write their name in the update column.
  
  I heard that we can do with trigger using the variable app_user. But in our project, they made authentication ldap for this form and when an employee login with their company login id they can see only this form of apex. no other option.
  
  In the same form, they were able to show the user name. I checked how they did it. they used * & user * variable for this. , It makes sense for you gentlemen?
  
  all I have to do is insert this & user in the column value.
  
  How to do this. I'm started working in the apex for the past four days alone. willing to bare with me if im a very stupid question.
  
  Thank you
  knani
  
  PS: I know that what im asking is the user name for the Web page the user name of the apex.
  
  Published by: kart on May 26, 2010 11:45

  Hello

  You can use: APP_USER substitution string.
  If you like to use that in the syntax of database trigger is v('APP_USER') for example

  :NEW.CHANGED_BY := NVL(v('APP_USER'), user);
  

  BR, Jari

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• You will need to check on a PC with WinXP OpSys PUP. Could DO with Win98 and earlier versions. HOW can I make WinXP let me control BACK Pup?

  You will need to check on a PC with WinXP OpSys PUP.  Could DO with Win98 and earlier versions.  HOW can I make WinXP let me control BACK PUP?   Acquired CNC machines controlled by PRE - Win.XP PC works fine.  But Win.XP prevents the PUPPY control via simple BACK and GWBASIC.   You want to be able to start/stop all 8 bits of data PUP with BASE and BACK.

  Thank you.   Jan Rowland

  Hey Jan Rowland,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited in the Windows XP Pro on the Technet Forums.

  Post your query in Technet Windows XP IT Pro Forums for assistance on this issue.

• you will need to merge with (same drive) c: drive d: drive.

  c: drive is full

  Unless you want to do a clean install of Windows (do your partitioning during installation), you will need partitioning software third party to do so. I usually use Acronis Disk Director, but there are others. MS - MVP - Elephant Boy computers - don't panic!

• Siri keeps saying "I don't see an app for that.  You will need to download one. »

  I just installed Sierra and tried to use Siri.  I can't open any app on my Mac.  No matter when I say something like, "FaceTime open" or "Open Pages," Siri comes back with something like "I don't see an app for that.  "You will need to download a ' or 'you don't seem to have an app called 'Pages'.  We could see if the App Store has it. »

  Hmmm... This is not sensible.

  You need to speak clearly. I had the same thing happen. It took a few tries but Siri has finally opened apps for me.

  Practice support

• Scanner EPSON Perfection V200 Photo: PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer.

  The PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer. I downloaded the 64-bit Epson software for the scanner.

  I found the solution to the problem, and it is indeed with the revised in Windows 7 Control Panel.

  Here how to solve the problem:
  Go to the control panel in Windows 7.
  Search scanner in the upper search box to the right
  You will see a "view scanners and cameras".
  Click it, you will see the Epson Perfection V200. Highlight.
  Click Properties, then Yes, then events.
  Where it says select an event, you MUST choose the event suitable for each option.
  To the Start button, choose Start the series of creativity
  For the copy button Choose launch Epson Scan
  E-mail button also Epson scan
  PDF includes Epson scan
  There you go.
  Now, all this was not necessary before, there are no instructions, and the fault lies with MS. how much more confused MS will do the control panel?

• You will need administrator permission.

  This error has become a nightmare for me. I've been struggling with almost a week now.

  I am trying to copy file from my hard drive on my new laptop (windows 7, dell 14z). Some files are throwing error, you will need administrator permission to copy this file, in spite, I logged in as an administrator.
  I gave all the tests with the evolution of the property, all permissions, removing UAC all... no help at all.... PLEASE suggest something.
  SARA

  This occurs because the files on your desk belong to a user that is different from the user of the laptop (or different passwords). In asserting the admin rights every time, you tell Windows that you don't care about file property. There are two ways to solve the problem:

  • Use the same account & password on the laptop that you use on the desktop.
  • Take ownership of files and folders: http://social.answers.microsoft.com/Forums/en-US/w7network/thread/24bdf172-2dbc-43b8-995d-a99b6a81413c/

  If it does not, then it is likely that your files are encrypted. You must decrypt before copying them.

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• You will need to disable the first 10 items?

  I have a new laptop and downloaded my first items 10 and Photoshop. However, I got a message when I opened the first telling me that I needed to disable it on another computer. But I can't figure out how to turn off!

  In addition, I don't know if it's connected with my need to turn off or if it's just the computer, but I can't use one of the links in the menu to create on the old laptop, and I can't connect to my Adobe ID on either.

  Can someone help me?

  PS: If it's important, all of my new laptop runs on Windows 8 and the old man is 7.

  TsukiNaito1

  Adobe permits you to use your first items purchased 10 on only 2 of your computers serial number. If you want to put this on a 3rd computer serial number you will need to 'Disable' installation on PC 1 or 2 to get this serial number of first Elements 10 purchased on computer 3.

  The message you get on computer 3, you are saying that your first 10 items is on more than 2 of your computers already (computer 1 and 2) and you want to install it on another (the 3rd computer).

  So, where you have first Elements 10 installed?

  Go to one of these first Elements 10 computer configurations. Open first items 10 to its workspace. Go to help Menu/disable and click on disable for this. Close to there. At this point, you can

  a. leave the program installed but disabled on computer 1 or 2 as the case

  or

  b. Uninstall computer 1 or 2 as the case mya.

  Please see the newsletter and let us know if the above is clear and works for you.

  Thank you.

  RTA

• After the upgrade to El Capitan, I get "the scanner is attributed to ImageCapture. Using the scanner with TWAIN? What to say?

  I have XP Epson-610 and have scanned on it successfully for years. To date, but when tried to open I get the ap scanner, the scanner is attributed to ImageCapture. Using the scanner with TWAIN? ImageCapture does not work on El Capitan? What is TWAIN, a printer-scanner driver?

  Thank you.

  TWAIN is an old scanner interface. OS X now use ICA, Architecture (?) of Capture of Image.

  Never seen this message, but I guess that means Capture of Image is using the scanner, or is configured to use the scanner and it is not necessary for the third party software. You open picture Capture, or did the scanning software provided with the scanner by Epson?

• You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

  You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

  I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

  Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

• You will need to get an older date?

  HI: SQL and PL/SQL

  I have a table like this. You will need to get more old datetime for each metricno. Need help

  METRICNO	TDATE	SUWIMON
  11	09:13:14 10/01/2014	1200.00
  11	09:13:23 10/01/2014	100.00
  11	18:47:01 10/02/2014	10000.00
  12	10/01/2014-18:47:17	1100.00
  12	21:59:58 10/01/2014	2000.00
  12	10/03/2014 22:00:13	10000.00
  13	10/07/2014 22:01:28	500.00
  13	10/08/2014-22:03:08	1100.00

  Output

  METRICNO	TDATE	TRANSFER_AMOUNT
  11	09:13:14 10/01/2014	1200.00
  12	10/01/2014-18:47:17	1100.00
  13	10/07/2014 22:01:28	500.00

  Thank you/Tequila

  with

  a_table as

  (select 11 metricno, adate to_date('1/10/2014 9:13:14 AM','dd/mm/yyyy hh:mi:ss AM'), 1200.00 suwimon Union double all the)

  Select 11, to_date('1/10/2014 9:13:23 AM','dd/mm/yyyy hh:mi:ss AM'), 100.00 Union double all the

  Select 11, to_date('2/10/2014 6:47:01 PM','dd/mm/yyyy hh:mi:ss AM'), 10000.00 Union double all the

  Order 12, to_date('1/10/2014 6:47:17 PM','dd/mm/yyyy hh:mi:ss AM'), 1100.00 Union double all the

  Order 12, to_date('1/10/2014 9:59:58 PM','dd/mm/yyyy hh:mi:ss AM'), 2000.00 Union double all the

  Order 12, to_date('3/10/2014 10:00:13 PM','dd/mm/yyyy hh:mi:ss AM'), 10000.00 Union double all the

  Select 13, to_date('7/10/2014 10:01:28 PM','dd/mm/yyyy hh:mi:ss AM'), 500.00 per union double all the

  Select 13, to_date('8/10/2014 10:03:08 PM','dd/mm/yyyy hh:mi:ss AM'), double 1100.00

  )

  Select metricno, adate, suwimon

  of (metricno, adate, suwimon, rank (select) over (partition by order metricno by tdate) rnk

  of a_table

  )

  where rnk = 1

  METRICNO	TDATE	TAMOUNT
  11	01/10/2014	1200
  12	01/10/2014	1100
  13	07/10/2014	500

  Just to provide your data in the case of other ideas arise

  Concerning

  Etbin

• "XYZ" is not in the scope. You may need to use an alias for "MNO".

  Hello

  I use 3 entities

  Global

  ABC

  XYZ

  All relationships are in one on one, Global contains ABC and ABC contains XYZ.

  XYZ contains a text MNO attribute and I executed the bottom rule in the doc of the rule of the OPM 10.3.1 and 10.4. In 10.4 it works fine where as in 10.3, I get an error "" XYZ" is not in the scope. "You may need to use an alias for"MNO""

  MNO is correct if

  MNO = "MARK".

  I would like to know why I get this error and the solution for it.
  Thanks in advance

  I highly recommend to undertake formal training. Then the OPA is easy to get up and run with, it's like any other powerful tool that once you start digging into the most powerful bits you need to have a better understanding of the underlying concepts to really get the best value.

  You must also make sure that read you the excellent guide of best practices of Jasmine

  http://www.Oracle.com/technetwork/apps-tech/policy-automation/learnmore/policymodelingbestpracticeguide-1371173.PDF

  So assuming that we still use the above very limited model (it's rare to see 1:1 too many relationships in practice) and you need to get this working on 10.3... essentially, what you're going to need to do is navigate the relationships to pass information to the entity levels - I'll use your feature names as on the model, but they write the rules more difficult to understand.

  I suppose that the text of standard relationship containment generated automatically.

  the global attribute value

  1 For(all instances of ABC, ABC has an MNO of "Mark")

  2 otherwise

  ABC has a MNO 'brand '.

  For (all instances of XYZ to ABC, MNO XYZ = "Mark")

  Although personally I would also enter the condition in the second rule to a conclusion so separate.